Series 107-75 Aluminum Extractor
nVent.com/SCHROFF 1-800-854-7086
nVent may modify standard parts without prior notice to or approval from customers. These modications may change product appearance, but will not have a detrimental effect on form, t or function. ©2018 nVent. All nVent marks and logos are
owned or licensed by nVent Services GmbH or its aliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specications without notice.
SERIES 107-75 ALUMINUM LATCHING INSERTER / EXTRACTOR
MATERIALS AND FINISH
EXTRACTOR
Materials:
Aluminum alloy 6061-T6
Finish:
Black anodize per Mil-A-8625,
Class 2, Type II or Clear Chemical
Film per Mil-DTL-5541, Class 3,
Type II for a conductive nish.
ASSEMBLY PINS
Materials:
Stainless steel
Finish:
Passivated
APPLICATION DATA
Two inserter or inserter-extractors are
recommended per printed circuit board
taller than 127 mm (5 in) height.
ASSEMBLY PIN
Option to be pre-started for:
• Faster and easier installation of
the extractor to the PCB
• Eliminates the need for special
tools or equipment and set
up time.
• Eliminates loss of loose
assembly pins
If the “P” option is not selected,
the extractors and the pins will
be packaged seperately.
P C
5
Series 107- extractor e
for PCB thickness of 2.4 (.094)
Units: mm (in)
.xx ± .25, .x ±.5
(.xxx ± .010, .xx ± .02)
Assembly Pin
5
1.5 (.06)
Card Guide
Surface
1.5 (.06)max.
6.1 (.24) min.
7.24 ±.38
(.285 ± .015)
22.86±.13
(.900 ± .005)
2.38 (.094) Dia.
2.29 ± .13
(.090 ± .005)
6.35
(.250) 18.5 (.73)
9.1
(.36)
6.35
(.250)
2.77
(.109)
Dia.
22.4 (.88)
82.5
(3.25)
12.06
(.475)
12.7 (.50) 7.37
(.290)
c