3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
• 6.50Ampspercontact
• End-to-endstackable
• Pressorheatstakepeg(soldertail)
• Futurebus+®compatible
• SeetheRegulatoryInformationAppendix(RIA)in
the“RoHScompliance”sectionofwww.3M.com/
interconnectsforcomplianceinformation
(RIAE1&C1apply)
Date Modied: August 21, 2009 TS-1125-B
Sheet 1 of 4
Physical
Insulation:
Material: High Temperature LCP
Flammability: UL 94V-0
Color: Beige
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ” [1.27 μm] Nickel
Wiping Area: See Ordering Information
Tails: See Ordering Information
Electrical
Current Rating: Power: 6.50 A per power socket contact at 70°C
Insulation Resistance: 103 MΩ
Withstanding Voltage: 1,500 V
AC for 60 seconds
Environmental
Temperature Rating: -55° C to 125° C
Process Temperature Rating: 260°C (Profile per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
ULFileNo.:E68080
MetPak is a trademark of 3M Company.
Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
TS-1125-B
Sheet 2 of 4
Ordering Information
MP2-SPXX-X1XX- XXXXX
mm
(Inch)
Tolerance Unless Noted
0 0.0 0.00
mm ±3 ±0.3 ±0.13
( ) Dimensions used for
Reference Only
8.00
.315
23.00
.906
12.45
.490
11.30
.445
13.80
.543
ROW
5 ROW PRODUCT
C
D
E
A
B
12.45
.490
21.00
.827
11.80
.465
6.00
.236
2.00
.079
TYP.
13.50
.531
9.30
.366
2.00
.079 5X
POSITION 2
FOR SPECIAL MONOBLOCKS
CONTACT 3M SALES
REPRESENTATIVE
4 ROW PRODUCT
11.95
.470
3.00
.118
10.00
.394
9.50
.374
POSITION 1 "B"
"A" TAIL LENGTH
SP = Power Socket Plating Options:
(See Table 3)
Note:
1. Refer to IEC 61076-4-104 Futurebus+® global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical
connection with a plated through-hole (PTH) in a printed circuit board, typically a “back plane.”
Rows
4 = 4 Rows
5 = 5 Rows
Contact Count
(See Table 1)
Tail Length
(See Table 2)
Termination Style
P = Press-Fit
M = Solder Tail (Press Peg)
S = Solder Tail (Heat Stake)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
TS-1125-B
Sheet 3 of 4
Table 1
Pin Count No of Rows
08 4
10 5
Table 2 - Tail & Post Lengths
Contact-to-PC Board Tail
Termination Option No. Dim. “A” Dim. “B”
Solder Press-Fit*
S1 2.72 [0.107] 5.20 [0.205]
S2 3.53 [0.139] 6.00 [0.236]
M1 2.72 [0.107] 3.57 [0.141]
M2 P1 3.53 [0.139] 3.57 [0.141]
*Compliant-Pin Tail
Table 3 - Plating
Plating Suffix Press-Fit Tails* Solder Tails Plating Composition
TG (RIA E2 & C2 apply) RIA E3 & C2 apply
0.25 μm [10 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
TG30 (RIA E2 & C2 apply) RIA E3 & C2 apply
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
TR30 (RIA E2 & C2 apply) RIA E3 & C2 apply
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
TR40B (RIA E2 & C2 apply) RIA E3 & C2 apply
0.13 μm [5 μ”] Min. Hard Au Contact Area, Lubricated
1.02 μm [40 μ”] Min. PdNi Contact Area
0.10 μm [4 μ”] Min. Pd Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
FJ RIA E1 & C1 apply RIA E1 & C1 apply
0.25 μm [10 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
KR RIA E1 & C1 apply RIA E1 & C1 apply
0.76 μm [30 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
RF RIA E1 & C1 apply RIA E1 & C1 apply
1.27 μm [50 μ”] Min. Au Contact Area, Lubricated
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
LR RIA E1 & C1 apply RIA E1 & C1 apply
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
PD RIA E1 & C1 apply RIA E1 & C1 apply
0.13 μm [5 μ”] Min. Hard Au Contact Area, Lubricated
1.02 μm [40 μ”] Min. PdNi Contact Area
0.10 μm [4 μ”] Min. Pd Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
*Compliant-Pin Tail
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Power Socket
2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
TS-1125-B
Sheet 4 of 4
Table 4 -- HOLE PLATING for TG, TG30, TR30, TR40B FINISHES ONLY
HOLE Finished Dia.
mm [in]
Cu Thickness
mm [in]
SnPb Thickness
microns [µ”]
Drilled Hole Dia.
mm [in]
“D” 0.65-0.80 [.0256-.0315] 0.025 [.001] min 15 [600] max 0.81-0.86 [.0319-.0339]
Recommended 4 Row PCB Hole
Mounting Pattern
Recommended 5 Row PCB Hole
Mounting Pattern
0.10
0.10
0.10
A1
"B"
2.00
.079
TYP.
6.00
.236
2.00
.079 3X 4.00
.157
1.00
.039
4.00
.157
8.00
.315
2.00
.079
4X
3.00
.118
2.05 +.05
-.00
.081 +.002
-.000
UNPLATED THRU HOLE
1.50 +.10
-.00
.059 +.004
-.000
“D” PLATED THROUGH-HOLE
UNPLATED THROUGH-HOLE
UNPLATED THROUGH-HOLE
Ø
Ø
Ø
Ø
Ø
Table 5 -- HOLE PLATING for FJ, KR, RF, LR and PD FINISHES ONLY
HOLE Finished Dia.
mm [in]
Cu Thickness
mm [in]
Immersion Matte
Sn Thickness
microns [μ”]
Electrolitic Au
Thickness
microns [μ”]
OSP ENTEK
Thickness
microns [μ”]
Drilled Hole Dia.
mm [in]
“D” 0.700-0.800
[.0276-.0315]
0.025-0.045
[0.001-0.002]
0.5 - 2.5
[20 - 100]
0.1 - 0.5
[4 - 20]
0.2 - 0.5
[8 - 20]
0.830-0.860 [.0330-.0340] or
0.85mm [ #66] TWIST DRILL
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217B-E
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects 3M is a trademark of 3M Company.