RS1A/B - RS1M/B Green 1.0A SURFACE MOUNT FAST RECOVERY RECTIFIER Features Mechanical Data * Glass Passivated Die Construction * Case: SMA/SMB * Fast Recovery Time for High Efficiency * Case Material: Molded Plastic. * Surge Overload Rating to 30A Peak * Ideally Suited for Automated Assembly * Moisture Sensitivity: Level 1 per J-STD-020 * Lead-Free Finish; RoHS Compliant (Notes 1 & 2) * * Halogen and Antimony Free. "Green" Device (Note 3) Terminals: Finish - Matte Tin Annealed over Copper Alloy Leadframe; Solderable per MIL-STD-202, Method 208 * Polarity: Cathode Band or Cathode Notch * Weight: SMA - 0.064 grams (Approximate) UL Flammability Classification Rating 94V-0 SMB - 0.093 grams (Approximate) SMA/SMB Top View Bottom View Ordering Information (Note 4) Part Number RS1x-13-F RS1xB-13-F Case SMA SMB Packaging 5,000/Tape & Reel 3,000/Tape & Reel * x = Device type, e.g. RS1D-13-F (SMA package); RS1JB-13-F (SMB package). Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packing details, go to our website at http://www.diodes.com/products/packages.html. Marking Information SMA/SMB YWW RS1x(B) RS1A/B - RS1M/B Document number: DS15002 Rev. 14 - 2 RS1x = Product Type Marking Code, ex: RS1G (SMA Package) RS1xB = Product Type Marking Code, ex: RS1GB (SMB Package) = Manufacturer's Code Marking YWW = Date Code Marking Y = Last Digit of Year (ex: 4 for 2014) WW = Week Code (01 to 53) 1 of 5 www.diodes.com January 2015 (c) Diodes Incorporated RS1A/B - RS1M/B Maximum Ratings (@TA = +25C unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Average Rectified Output Current @ TT = +120C Non-Repetitive Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load VRRM VRWM VR VR(RMS) IO RS1 A/AB RS1 B/BB RS1 D/DB RS1 G/GB RS1 J/JB RS1 K/KB RS1 M/MB Unit 50 100 200 400 600 800 1,000 V 35 70 140 280 1.0 420 560 700 V A 30 IFSM A Thermal Characteristics Characteristic Typical Thermal Resistance, Junction to Terminal (Note 6) Operating and Storage Temperature Range Symbol RJT TJ, TSTG Value 20 -65 to +150 Unit C/W C Electrical Characteristics (@TA = +25C unless otherwise specified.) Characteristic Minimum Reverse Breakdown Voltage (Note 5) Maximum Forward Voltage Drop Peak Reverse Current at Rated DC Blocking Voltage (Note 5) Maximum Reverse Recovery Time (Note 7) Typical Total Capacitance (Note 8) Notes: Symbol @ IR =0.5 A @ IF = 1.0A @ TA = +25C @ TA = +125C V(BR)R VFM RS1 A/AB 50 RS1 B/BB 100 RS1 D/DB 200 IRM trr CT RS1 G/GB 400 1.3 5.0 200 150 RS1 J/JB 600 RS1 M/MB 1,000 Unit V V A 250 15 RS1 K/KB 800 500 ns pF 5. Short duration pulse test used to minimize self-heating effect. 6. Valid provided that terminals are kept at ambient temperature. 7. Reverse recovery test conditions: IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. 8. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. RS1A/B - RS1M/B Document number: DS15002 Rev. 14 - 2 2 of 5 www.diodes.com January 2015 (c) Diodes Incorporated RS1A/B - RS1M/B IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 1.2 1.0 0.8 0.6 0.4 0.2 0 25 50 75 100 125 150 TT, TERMINAL TEMPERATURE ( C) Fig. 1 Forward Current Derating Curve 10 0 TJ = 25oC 0.01 1,000 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve Document number: DS15002 Rev. 14 - 2 0.1 0 0.4 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IR, INSTANTANEOUS REVERSE CURRENT (A) IFSM, PEAK FORWARD SURGE CURRENT (A) 20 RS1A/B - RS1M/B 1.0 175 30 1 10 3 of 5 www.diodes.com TJ = 125 C 100 10 T J = 25C 1.0 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics January 2015 (c) Diodes Incorporated RS1A/B - RS1M/B Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. B A C D J SMA Dim Min Max A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D 0.15 0.31 E 4.80 5.59 G 0.05 0.20 H 0.76 1.52 J 1.96 2.40 All Dimensions in mm SMB Dim Min Max A 3.30 3.94 B 4.06 4.57 C 1.96 2.21 D 0.15 0.31 E 5.00 5.59 G 0.05 0.20 H 0.76 1.52 J 2.00 2.50 All Dimensions in mm G H E Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. 1 X X SMA Y Dimensions G C G X X1 Y SMB Value (in mm) 4.00 1.50 2.50 6.50 1.70 Dimensions Value (in mm) C 4.30 G 1.80 X 2.50 X1 6.80 Y 2.30 C RS1A/B - RS1M/B Document number: DS15002 Rev. 14 - 2 4 of 5 www.diodes.com January 2015 (c) Diodes Incorporated RS1A/B - RS1M/B IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2015, Diodes Incorporated www.diodes.com RS1A/B - RS1M/B Document number: DS15002 Rev. 14 - 2 5 of 5 www.diodes.com January 2015 (c) Diodes Incorporated