4 3 b 2 1 The eopram'concttion Ect Werle toa te te diclcad, rapresiucad cor cad, Th REVISIONS whole or ih part, for monutucture or acle by emyona then Armphanal cee uae ory InROReoe hire ascarem, en waned tm cwclone SYM | _ECN DESCRIFTION DATE APPROVED L | HK1406 | Release to Customer 05/05/97 | NELSON M | HK3437 | UPDATE DRAWING TO COMPLY WITH RoHS |07/18/05 |IP Flat ribbon cable - ~ _ CPK Options Accessories 7 GA Mark date code in this \ area on opposite side. / \ t Z X L 2 Way _ o) 2) | __) rm SS 2] 4 -T N 3] 3/2 q CL ft No CPK =| 3] = -E AT 3 Center Polarizing Key a 2 a} | o = a Q (4 pcs shown) Ss 0.128[3.3] @| = e a 8 3 . = 3 / AMPHENOL s 5 CO Co) : y r A Install GPK Polarizing plug (Optional) See CPK options oI 0.050[1.27] N a 0.135[3.4] a _ 0.150 [3.81] 0.030[0.77] NIs 3 t+ N u2 Y Ble om) LAA is 8 -. 0 Yo ols fry = I cok {I Wi yy 8 HB Be 6 es 4 7 SEY HE OOO oooe da pm), CPK molded-in _ Close entry cover zg 0.012[0.30] min. ; = 3 Custom D g 0.140[ 3.56] 8 Section view U S O e r rq W | MN g o 0.100[2.54] : 4:1 1 - Insulator Body 1 B 2 - Contact XX A 3 - Caver 1 4 - Strain Releif (optional) (1) ITEM PART OR NGMENCLATURE GR QTY NO IDENTIFICATION NO DESCRIPTION REQ" PARTS LIST . UNLESS OTHERWISE SPECIFIED APPROVAL | DATE Detail_x x TOLERANCES aie [oRawn _ ALEX.LEE 7/18/05 Am Dp henol x #/- 020 0.51 jereexeD Sui 7/18/06 a Be BR sq 0,033[0.84] FRACTIONS. +/- " Tr sq 0.068[1.74] Anois #/= 2.0" 2.0" | DRAWING FILE FOR MATERIALS AND FINISHES | \DRAWING\ 812\Ca1Z.dwg 812 Series Connector a os REWOVE SHARP EDGES ANGLE OF PROJECTION Note: Unit in inch [mm] DIMENSIONS SIZE | DRAWING NO, REV. us. ens + A3| C812XXXXXXX M wee __| SCALE | 2: 1 | SHEET 1 OF 2 4 3 - 2 | 14 3 b 2 1 The Sopra caren Erot Wie tad tr be diced, rapraiuced or used, REVISIONS whole er ih part, fer monutacture or sole by anyone then Amphanal cee uae ory InROReoe hire ascarem, en waned tm cwclone SYM | _ECN DESCRIFTION DATE APPROVED See sheet 1 Notes: Part Number System Table | Options 1. Connectors purchased under this drawing will mate with MIL-C83503/20A and MILC82503/21A header connectors with latches or without latches and 816 / 821 header connectors. Standard preduct E842812XXXXXXXX 22 Grey, no CPK 2. This assembly is designed to meet requirements of L 33 Grey, CPK maoldedin MIL-C83503/7B, and European standard IEC 603-13 Contact Material: 34 Grey, CPK moldedin, CEC even side Nil Beryllium copper 35 Grey, CPK molded-in, CEC odd side /\For P/N with prefix "E", date code are added on back side Date code: H Phosphor bronze 43 Grey, no CPK, CEC odd side of socket, Nil No date code Platina: 44 - Grey, no CPK, CEC even side E Date code printed 9 /\this polarization key slot not available on size 10 and 14. AA Gold flash 18 - 152" gold, 100-2002" . . : Strain relief may be orderded separately, Amphenol P/N No. of bright pure Tin in the Standard_preduct_with_special requirement 8001206XXX (see Table Il) Contacts termination end of contacts. 03 - Grey, no CPK, CEC bulk pack . cas {see table Il) 34 30#" gold, 100-200" 04 Grey, CPK molded-in, CEC bulk pack /\strein relief is bagged separately. bright >pure Tin in the 12 Grey, no CPK, cover bulk pack Onti termination end of contacts. 13 Grey, CPK molded-in, cover bulk pack Center polarizating key (CPK) may be ordered separately, Plions 32 Grey, CPK installed Amphenol P/N 800-1211-G02 grey or 8001211012 black {see table |} 1 without strain relief Y. ; ; 3 without strain relief J6 Grey, CPK molded-in, CEC even side with slots /\ optional closed entry cover (CEC) available. May be ordered body and cover taped pack 37 Grey, GPK molded-in, CEC odd side with slots separately. (see Table Il on this sheet) assemblies ordered without . y . . P P 38 Gray, CPK moldedin, standard cover with slats standard caver and with CEC will have CECs bagged separately. 4 with strain relief Ys _ Jy / 5 with strain relief bulk pack 42 Grey, CPK Glued-in Polarizing plug may be ordered separately, Amphenol P/N _ ww . . 800-1211-004 15% GF Nylon white or B00-1211-005 30% 6 Body cond. folie toned Peck Non-standard product (specifi tt ired) GF PBT grey 02 Black, no CPK, non pre-latch 10, Termination kit P/N 357-116. 05 Black, no CPK, CEC bulk pack 11. This connector is both UL and CSA approved. 06 Black, CPK molded-in, CEC bulb pack /A\ 12. Refer to Amphenol S812-001 for product specification. 09 Black, no CPK . 13. Material should be fulfilled amphenol spec#SSNOQ1. 10 Black, CPK molded-in 235 Black, no CPK 45 - Black, CPK maldedin Table Il No. of [Strain Relief 8001206-Xxx| CEC 8001205XXX A 8 position Grey Black Grey Black int.004 | mm+.10} in+.005 | mm+.13 10 030 -050 070 0380 .68 (17.27]| .40 [10.16] 14 -031 -051 -071 091 88 [22.35]| .60 [15.24] 16 032 052 072 0982 .98 [24.89]| .70 [17.78] C T lg Th [) 20 033 055 -073 093 1.18 [29.97]] .90 [22.86] U S OQ r rd W | M g 26 034 054 074 094 1.48 [37.59]| 1.20 [30.48] SESS SRWISE GPEGEED APPROVAL DATE 30 040 060 080 100 1.68 [42.67]| 1.40 [35.56] TOLERANCES uete [oRawn ALEX.LEE 7/18/05 Am phen O| 34 035 -055 075 085 1.88 [47.75]| 1.60 [40.64] x + 020 0.51 | SHECKED TSU! 7/18/05 36 041 061 081 101 1.98 [50.29]| 1.70 [43.18] Xx 42 910 035 -eatexes 40 036 -056 076 096 2.18 [55.37]] 1.90 [48.26] 20K + / yo 0:13 50 037 -057 -077 097 2.68 | [68.07]| 2.40 | [60.96] ANGLES +/ 2.) 2.9" | ae FE | FOR MATERIALS AND FINISHES | i i 60 038 -058 -078 098 3.18 | [80.77]| 2.90 | [73.66] SE NO ee ee B12 Series Connector us CHES + A3| C812XXXXXXX M wee __| SCALE | 2: 1 | SHEET 2 OF 2 4 | 3 T 2 1