For technical questions, contact: powertron@vishaypg.com
USR UNR 2-0710
Powertron
Document Number: 64219
Revision: 20-09-10
www.powertron.de
1
Type USR 2-0710 UNR 2-0710
Resistance Range 1.0 Ohms to 4.99 kOhms 5.0 kOhms to 150 kOhms 1.0 Ohms to 5.0 kOhms
Power rating (70°C) 0.4W
(0.6W upon request)
0.6W 0.4W
Tolerances
from 1.0 Ohms
from 5.0 Ohms
from 12.0 Ohms
from 25.0 Ohms
from 50.0 Ohms
0.1% / 0.25% / 0.5% / 1%
0.05% / 0.1% / 0.25% / 0.5% / 1%
0.02% / 0.05% / 0.1% / 0.25% / 0.5% / 1%
0.01% / 0.02% / 0.05% / 0.1% / 0.25% / 0.5% / 1%
0.005% / 0.01% / 0.02% / 0.05% / 0.1% / 0.25% / 0.5% / 1%
Stability 0.01%
Shelf Life Stability 25ppm / ∆R after 1 year
50ppm / ∆R after 3 year
Temperature Coefcient max. ±5ppm/K (-55 to 155°C)
typ. ±3ppm/K (-55 to 125°C)
upon request ±1ppm/K (0 to 60°C)
and ±1ppm/K (-55 to 125°C)
Insolation Resistance > 10GOhm
Thermal EMF < 0.1µV/K
Operating Temperature Range -55 to 155°C
Resistor Material NiCr-Foil
Substrate Al2O3AlN
Housing PBTP / Epoxy
Connector Material Cu tinned
Terminals 2
Notes Specially designed for ap-
plications with fast changing
electrical load
SPECIFICATIONS
Part Number - Resistance - Contact - Tolerance - TCR
UNR 2-0710 3.7Ohms J 0.5% 1ppm
Ordering Information
Resistances from 1Ohm to 150kOhms•
Power Rating to 0.6Watt•
Resistance Tolerances to ±0.005%•
TCR to ±1ppm/K•
Load Stability to 0.01%•
Grid (E) 3.81mm (0.15inches) = D
Grid (E) 5.08mm (0.2inches) = J
For technical questions, contact: powertron@vishaypg.com
USR UNR 2-0710
Powertron
Document Number: 64219
Revision: 20-09-10
www.powertron.de
2
0
20
40
60
80
100
120
50 70 85 100 115 130 145 155
Power (% from
nominal power)
Ambient Temperature (°C)
Derating
Temperature Coefcient
SPECIFICATIONS (continued)
Dimensions
Dimension mm
tol.
(±mm) inches
tol.
(±inches)
A30.00 2.0 1.18 0.079
B 7.00 0.1 0.28 0.004
C 9.50 0.2 0.37 0.008
D2.00 0.1 0.08 0.004
E1 3.81 0.1 0.15 0.004
E2 5.08 0.1 0.20 0.004
F3.00 0.1 0.12 0.004
G Ø0.60 0.1 Ø0.02 0.004
-1500
-1000
-500
0
500
1000
1500
DR/R (ppm)
Temperature C)
+4,4 ppm/K
-50
-25 025 50 75 100 125
+5ppm/K
-5ppm/K
Nominal Spread
±2.3ppm/K
Nominal DR/R
Vishay Precision Group
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
Legal Disclaimer Notice
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Legal Disclaimer Notice
Disclaimer
Document No.: 63999
Revision: 27-Apr-11