DPX Series Single, Dual & Triple Output 40W to 60W DIN Mount DC-DC Converters Features u DIN Rail Mount Version of TDK-Lambda's PX Series u 1600VDC Input to Output Isolation u Wide Operating Temperature Range u Internally Protected u All In One Package Key Market Segments & Applications Specifications Model Max Output Power Efficiency Voltage Accuracy Volt. Adjust. (Single Output Only) Minimum Load, each output (1) Line Regulation Load Regulation (10% to 100%) Cross Regulation (25% to 100%) Start up time Remote on/off (ref. to neg. input) Temperature Coefficient Operating Temperature Storage Temperature Thermal Shock Relative Humidity Trans. Resp.(25% step load chng.) Overvolt. Protection (Zener clamp) Overcurr. & Short Circuit Protection Input Surge Volt. (Max. for 100ms) Isolation Voltage Isolation Resistance Typical Switching Frequency (Fixed) Shock & Vibration Conducted & Radiated Emissions Immunity Safety Agency Approval Size (W x H x L) Weight Warranty DPX40 W % % % % % % % ms %/C C %RH ms VDC kHz In(mm) g Years 40W 60W 85% typical at nominal input & full load Single, Dual & Triple Main 1%, Triple auxiliaries 5% 10% Single output 0%, Dual & Triple outputs 10% Single / Dual 0.5%, Triple (main) 1%, (auxiliaries) 5% Single 0.5%, Dual 1%, Triple (main) 2%, (auxiliaries) 5% Triple (main) 1%, Dual / Triple (auxiliaries) 5% 100ms typ. Positive Logic: ON: Open or 3.5-12V, OFF: Short or <1.2V <0.02%/C -40 to 85C, derate linearly to 20% load from 60C to 85C -40 to 85C MIL-STD-810D 5 to 95%RH (non condensing) 250s recovery 5V: 6.2V, 12V: 15V, 15V: 18V Typically at 150%, hiccup with self recovery 12V input: 36V, 24V input: 50V, 48V input: 100V 1600VDC minimum 109 Ohms minimum 300kHz (typ) MIL-STD-810F EN55022 Level B EN61000-4-2, -3, -4, -5, -6 Pref Criteria A CE Mark 0.96 x 2.27 x 4.92" (24.5 x 57.6 x 125mm) 182g Two Years 1. No load operation will not damage the unit 1-800-526-2324 * www.us.tdk-lambda.com/lp/ DPX60 5 DPX Series Outline Drawing Model Selector Output Voltage (V) Single Outputs 5V 12V 15V 5V 12V 15V 5V 12V 15V 5V 12V 15V Dual Outputs 12 15 12 15 Triple Outputs +5V, 12V +5V, 15V +5V, 12V +5V, 15V +5V, 12V +5V, 15V Output Current (A) Input Voltage (VDC) Model Ripple & Noise (Pk to Pk mV) Max Load Cap (uF) 8A 3.33A 2.67A 8A 3.33A 2.67A 12A 5A 4A 12A 5A 4A 9.5 - 36VDC 9.5 - 36VDC 9.5 - 36VDC 18 - 75VDC 18 - 75VDC 18 - 75VDC 18 - 36VDC 18 - 36VDC 18 - 36VDC 36 - 75VDC 36 - 75VDC 36 - 75VDC DPX4024WS05 DPX4024WS12 DPX4024WS15 DPX4048WS05 DPX4048WS12 DPX4048WS15 DPX6024S05 DPX6024S12 DPX6024S15 DPX6048S05 DPX6048S12 DPX6048S15 50mV 75mV 75mV 50mV 75mV 75mV 75mV 100mV 100mV 75mV 100mV 100mV 13600uF 2360uF 1510uF 13600uF 2360uF 1510uF 20400uF 3550uF 2300uF 20400uF 3550uF 2300uF 1.667A 1.333A 1.667A 1.333A 9.5 - 36VDC 9.5 - 36VDC 18 - 75VDC 18 - 75VDC DPX4024WD12 DPX4024WD15 DPX4048WD12 DPX4048WD15 120mV 150mV 120mV 150mV 1200uF 1510uF 1200uF 1510uF 6, 0.4A 6, 0.3A 6, 0.4A 6, 0.3A 6, 0.4A 6, 0.3A 9.5 - 18VDC 9.5 - 18VDC 18 - 36VDC 18 - 36VDC 36 - 75VDC 36 - 75VDC DPX4012T0512 DPX4012T0515 DPX4024T0512 DPX4024T0515 DPX4048T0512 DPX4048T0515 50 / 75mV 50 / 75mV 50 / 75mV 50 / 75mV 50 / 75mV 50 / 75mV 6800uF, 330uF 6800uF, 110uF 6800uF, 330uF 6800uF, 110uF 6800uF, 330uF 6800uF, 110uF Other Industrial Products DPP / DSP DLP DLP-PU R Series For Additional Information, please visit us.tdk-lambda.com/lp/products/dpx-series.htm 10W to 960W, 5V to 48V power supplies 75W to 240W, 24V power supplies Redundancy Module (20A) 6A to 30A, single and three phase EMI filters 1-800-526-2324 * www.us.tdk-lambda.com/lp/ 6 Revision A2: Nov 2011