CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 171 Radial Leaded Metallized Polypropylene
Radial Box Metallized Polypropylene Capacitors
Type 171 radial leaded, box, metallized polypropyl-
ene capacitors are available in five pitch sizes and
have a flame retardant case and epoxy encapsulant that
meets UL94V-0. The Type 171 is an excellent choice
for applications requiring low dielectric losses, high
insulation resistance in an AC or DC environment. The
polypropylene direlectric gives this capacitor excellent
pulse rise time (dv/dt) performance.
Highlights
High dv/dt
Low leakage
Radial leaded (7.5, 10, 15, 22.5, 27.5 mm pitch)
Flame retardant case and encapsulant meets
UL94V-0
Non-inductively wound
•
•
•
•
•
Specifications
Capacitance Range:
Voltage Range:
Capacitance Tolerance:
Operating Temperature Range:
Dielectric Withstand Voltage:
Dissipation Factor (DF):
0.0022 to 3.3 µF
160 to 630 Vdc (90 to 250 Vac, 60 Hz)
±5%, ±10%, ±20%
–55 ºC to +105 ºC (derate linearly to 50% rated
voltage at 105 ºC)
1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC
tgδ x 10–4 at +25 ºC ±5 ºC
kHz C ≤0.1 µF 0.1 µF <C ≤1 µF C >1 µF
1 ≤6 ≤6 ≤6
10 ≤10 ≤20 —
100 ≤30 — —
Insulation Resistance:
Self Inductance:
Life Test:
Damp Heat Test:
Soldering:
Long Term Storage Stability:
Maximum Pulse Rise Time dv/dt and Pulse
Characteristic (Wo):
100,000 MΩ x µF, 200,000 MΩ Min.
2 mm lead length - total self inductance
L Max
Vn 7.5 10 15 22.5 27.5
160 5.5 4 2 1.5 1
250 15 11 7 4 3
400 35 20 10 5.5 5
630 55 30 15 8 7
If the working voltage (V) is less than the nominal voltage (Vn), the capaci-
tor can work at higher dv/t . In this case, the maximum value allowed
is obtained by multiplying the above value (See table dv/dt) with the ratio
Vn/V
2000 hrs @ +85 ºC 1.25 x Vn
95% RH @ +40 ºC for 56 days
260 ºC ±5 ºC for 10 s ±1 s
ΔC/C ≤ ±0.5% after 2 years
Pitch (mm) 7.5 10 15 22.5 27.5
L (nH) ≈ 8 9 10 18 18
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 171 Radial Leaded Metallized Polypropylene
Outline Drawing
* indicates capacitance tolereance, J = ±5%, K = ±10%, M = ±20%
Cap Inches (mm) ESR (mΩ) IRMS (Amps)
Catolog 20 kHz to
(µF) Part Number L Max T Max H Max S (Pitch) Ød 100 kHz 25 ºC 45 ºC 85 ºC
160 Vdc / 90 Vac 60 Hz
.033 171333*160B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
Not applicable.
These capacitance values
are not customarily used in
switched-mode power supplies
.047 171473*160B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
.047 171473*160C 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10) 0.031 (0.8)
.068 171683*160C7 0.413 (10.5) 0.197 (5.0) 0.433 (11.0) 0.295 (7.5) 0.031 (0.8)
.068 171683*160D 0.512 (13.0) 0.197 (5.0) 0.433 (11.0) 0.394 (10.0) 0.031 (0.8)
.10 171104*160C7 0.413 (10.5) 0.197 (5.0) 0.433 (11.0) 0.295 (7.5) 0.031 (0.8)
.10 171104*160E 0.512 (13.0) 0.236 (6.0) 0.472 (12.0) 0.394 (10.0) 0.031 (0.8)
.15 171154*160D7 0.413 (10.5) 0.236 (6.0) 0.472 (12.0) 0.295 (7.5) 0.031 (0.8)
.15 171154*160E 0.512 (13.0) 0.236 (6.0) 0.472 (12.0) 0.394 (10) 0.031 (0.8)
.22 171224*160F 0.709 (18.0) 0.197 (5.0) 0.433 (11.0) 0.591 (15.0) 0.031 (0.8)
.33 171334*160G 0.709 (18.0) 0.236 (6.0) 0.472 (12.0) 0.591 (15.0) 0.031 (0.8)
.47 171474*160H 0.709 (18.0) 0.295 (7.5) 0.531 (13.5) 0.591 (15.0) 0.031 (0.8) 37 3.7 3.1 1.4
.68 171684*160L 1.043 (26.5) 0.236 (6.0) 0.591 (15.0) 0.886 (22.5) 0.031 (0.8) 33 4.1 3.5 1.6
1.0 171105*160N 1.043 (26.5) 0.335 (8.5) 0.669 (17.0) 0.886 (22.5) 0.031 (0.8) 26 5.5 4.7 2.6
1.5 171155*160O 1.043 (26.5) 0.394 (10.0) 0.748 (19.0) 0.886 (22.5) 0.031 (0.8) 20 6.1 5.1 3.1
2.2 171225*160P 1.260 (32.0) 0.433 (11.0) 0.787 (20.0) 1.083 (27.5) 0.031 (0.8) 18 6.3 5.7 3.3
3.3 171335*160Q 1.260 (32.0) 0.512 (13.0) 0.886 (22.5) 1.083 (27.5) 0.031 (0.8) 16 7.4 6.4 3.6
250 Vdc / 90 Vac 60 Hz
.015 171153*250B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
Not applicable.
These capacitance values
are not customarily used in
switched-mode power supplies
.022 171223*250B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
.022 171223*250C 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10) 0.031 (0.8)
.033 171333*250C 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10) 0.031 (0.8)
.047 171473*250D 0.512 (13.0) 0.197 (5.0) 0.433 (11.0) 0.394 (10) 0.031 (0.8)
.068 171683*250E 0.512 (13.0) 0.236 (6.0) 0.472 (12.0) 0.394 (10) 0.031 (0.8)
Ratings
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 171 Radial Leaded Metallized Polypropylene
Cap Inches (mm) ESR (mΩ) IRMS (Amps)
Catolog 20 kHz to
(µF) Part Number L Max T Max H Max S (Pitch) Ød 100 kHz 25 ºC 45 ºC 85 ºC
160 Vdc / 90 Vac 60 Hz
0.033 171333*160B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
Not applicable.
These capacitance values
are not customarily used in
switched-mode power supplies
0.047 171473*160B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
0.047 171473*160C 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10) 0.031 (0.8)
0.068 171683*160C7 0.413 (10.5) 0.197 (5.0) 0.433 (11.0) 0.295 (7.5) 0.031 (0.8)
0.068 171683*160D 0.512 (13.0) 0.197 (5.0) 0.433 (11.0) 0.394 (10.0) 0.031 (0.8)
0.1 171104*160C7 0.413 (10.5) 0.197 (5.0) 0.433 (11.0) 0.295 (7.5) 0.031 (0.8)
0.1 171104*160E 0.512 (13.0) 0.236 (6.0) 0.472 (12.0) 0.394 (10.0) 0.031 (0.8)
0.15 171154*160D7 0.413 (10.5) 0.236 (6.0) 0.472 (12.0) 0.295 (7.5) 0.031 (0.8)
0.15 171154*160E 0.512 (13.0) 0.236 (6.0) 0.472 (12.0) 0.394 (10) 0.031 (0.8)
0.22 171224*160F 0.709 (18.0) 0.197 (5.0) 0.433 (11.0) 0.591 (15.0) 0.031 (0.8)
0.33 171334*160G 0.709 (18.0) 0.236 (6.0) 0.472 (12.0) 0.591 (15.0) 0.031 (0.8)
0.47 171474*160H 0.709 (18.0) 0.295 (7.5) 0.531 (13.5) 0.591 (15.0) 0.031 (0.8) 37 3.7 3.1 1.4
0.68 171684*160L 1.043 (26.5) 0.236 (6.0) 0.591 (15.0) 0.886 (22.5) 0.031 (0.8) 33 4.1 3.5 1.6
1.0 171105*160N 1.043 (26.5) 0.335 (8.5) 0.669 (17.0) 0.886 (22.5) 0.031 (0.8) 26 5.5 4.7 2.6
1.5 171155*160O 1.043 (26.5) 0.394 (10.0) 0.748 (19.0) 0.886 (22.5) 0.031 (0.8) 20 6.1 5.1 3.1
2.2 171225*160P 1.26 (32.0) 0.433 (11.0) 0.787 (20.0) 1.083 (27.5) 0.031 (0.8) 18 6.3 5.7 3.3
3.3 171335*160Q 1.26 (32.0) 0.512 (13.0) 0.886 (22.5) 1.083 (27.5) 0.031 (0.8) 16 7.4 6.4 3.6
250 Vdc / 90 Vac 60 Hz
0.015 171153*250B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
Not applicable.
These capacitance values
are not customarily used in
switched-mode power supplies
0.022 171223*250B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
0.022 171223*250C 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10) 0.031 (0.8)
0.033 171333*250C 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10) 0.031 (0.8)
0.047 171473*250D 0.512 (13.0) 0.197 (5.0) 0.433 (11.0) 0.394 (10) 0.031 (0.8)
0.068 171683*250E 0.512 (13.0) 0.236 (6.0) 0.472 (12.0) 0.394 (10) 0.031 (0.8)
Ratings
* indicates capacitance tolereance, J = ±5%, K = ±10%, M = ±20%
Cap Inches (mm) ESR (mΩ) IRMS (Amps)
Catolog 20 kHz to
(µF) Part Number L Max T Max H Max S (Pitch) Ød 100 kHz 25 ºC 45 ºC 85 ºC
250 Vdc / 90 Vac 60 Hz
.10 171104*250F 0.709 (18.0) 0.197 (5.0) 0.433 (11.0) 0.591 (15.0) 0.031 (0.8)
Not applicable
.15 171154*250G 0.709 (18.0) 0.236 (6.0) 0.472 (12.0) 0.591 (15.0) 0.031 (0.8)
.22 171224*250H 0.709 (18.0) 0.295 (7.5) 0.531 (13.5) 0.591 (15.0) 0.031 (0.8)
.33 171334*250L 1.043 (26.5) 0.236 (6.0) 0.591 (15.0) 0.886 (22.5) 0.031 (0.8)
.47 171474*250M 1.043 (26.5) 0.276 (7.0) 0.630 (16.0) 0.886 (22.5) 0.031 (0.8) 35 3.8 3.6 1.7
.68 171684*250Q 1.260 (32.0) 0.512 (13.0) 0.886 (22.5) 1.083 (27.5) 0.031 (0.8) 32 4 3.8 1.9
1.0 171105*250P 1.260 (32.0) 0.433 (11.0) 0.787 (20.0) 1.083 (27.5) 0.031 (0.8) 28 4.4 4.4 3.2
1.5 171155*250Q 1.260 (32.0) 0.512 (13.0) 0.886 (22.5) 1.083 (27.5) 0.031 (0.8) 26 5.1 4.9 3.5
400 Vdc / 220 Vac 60 Hz
.0068 171682*400B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
Not applicable.
These capacitance values
are not customarily used in
switched-mode power sup-
plies
.010 171103*400B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
.010 171103*400C 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10.0) 0.031 (0.8)
.015 171153*400D 0.512 (13.0) 0.197 (5.0) 0.433 (11.0) 0.394 (10.0) 0.031 (0.8)
.022 171223*400D 0.512 (13.0) 0.197 (5.0) 0.433 (11.0) 0.394 (10.0) 0.031 (0.8)
.033 171333*400E 0.512 (13.0) 0.236 (6.0) 0.472 (12.0) 0.394 (10.0) 0.031 (0.8)
.047 171473*400F 0.709 (18.0) 0.197 (5.0) 0.433 (11.0) 0.591 (15.0) 0.031 (0.8)
.068 171683*400G 0.709 (18.0) 0.236 (6.0) 0.472 (12.0) 0.591 (15.0) 0.031 (0.8)
.10 171104*400H 0.709 (18.0) 0.295 (7.5) 0.531 (13.5) 0.591 (15.0) 0.031 (0.8)
.15 171154*400I 0.709 (18.0) 0.335 (8.5) 0.571 (14.5) 0.591 (15.0) 0.031 (0.8)
.22 171224*400N 1.043 (26.5) 0.335 (8.5) 0.669 (17.0) 0.886 (22.5) 0.031 (0.8)
.33 171334*400O 1.043 (26.5) 0.394 (10.0) 0.748 (19.0) 0.886 (22.5) 0.031 (0.8)
.47 171474*400P 1.260 (32.0) 0.433 (11.0) 0.787 (20.0) 1.083 (27.5) 0.031 (0.8) 32 5.7 5 2.2
.68 171684*400Q 1.260 (32.0) 0.512 (13.0) 0.886 (22.5) 1.083 (27.5) 0.031 (0.8) 30 5.7 5.5 2.4
630 Vdc / 250 Vac 60 Hz
.0022 171222*630B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
Not applicable.
These capacitance values
are not customarily used in
switched-mode power sup-
plies
.0022 171222*630C 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10.0) 0.031 (0.8)
.0033 171332*630B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
.0033 171332*630C 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10.0) 0.031 (0.8)
.0047 171472*630B 0.413 (10.5) 0.157 (4.0) 0.374 (9.5) 0.295 (7.5) 0.024 (0.6)
.0047 171472*630C 0.512 (13.0) 0.157 (4.0) 0.374 (9.5) 0.394 (10.0) 0.031 (0.8)
.0068 171682*630D 0.512 (13.0) 0.197 (5.0) 0.433 (11.0) 0.394 (10.0) 0.031 (0.8)
.010 171103*630D 0.512 (13.0) 0.197 (5.0) 0.433 (11.0) 0.394 (10.0) 0.031 (0.8)
.015 171153*630E 0.512 (13.0) 0.236 (6.0) 0.472 (12.0) 0.394 (10.0) 0.031 (0.8)
.022 171223*630F 0.709 (18.0) 0.197 (5.0) 0.433 (11.0) 0.591 (15.0) 0.031 (0.8)
.033 171333*630G 0.709 (18.0) 0.236 (6.0) 0.472 (12.0) 0.591 (15.0) 0.031 (0.8)
.047 171473*630H 0.709 (18.0) 0.295 (7.5) 0.531 (13.5) 0.591 (15.0) 0.031 (0.8)
.068 171683*630I 0.709 (18.0) 0.335 (8.5) 0.571 (14.5) 0.591 (15.0) 0.031 (0.8)
.10 171104*630N 1.043 (26.5) 0.335 (8.5) 0.669 (17.0) 0.886 (22.5) 0.031 (0.8)
.15 171154*630O 1.043 (26.5) 0.394 (10.0) 0.748 (19.0) 0.886 (22.5) 0.031 (0.8)
.22 171224*630P 1.260 (32.0) 0.433 (11.0) 0.787 (20.0) 1.083 (27.5) 0.031 (0.8)
.33 171334*630Q 1.260 (32.0) 0.512 (13.0) 0.886 (22.5) 1.083 (27.5) 0.031 (0.8)
