Ordering information AC-DC Power Supplies Enclosed type R10A R R 1 10A 2 -5 3 -O 4 1Series name 2Output wattage 3Output voltage 4Optional *2 G :Low leakage current J :Connector type N :with Cover R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT R10A-3 6 3V 2.0A R10A-5 10 5V 2.0A R10A-12 10.8 12V 0.9A R10A-15 10.5 15V 0.7A R10A-24 12 24V 0.5A SPECIFICATIONS INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS *1 *2 * * * MODEL VOLTAGE[V] ACIN 100V CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] INRUSH CURRENT[A] ACIN 100V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +50C RIPPLE[mVp-p] -10 - 0C 0 to +50C RIPPLE NOISE[mVp-p] -10 - 0C 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C *1 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION OPERATING INDICATION REMOTE SENSING REMOTE ON/OFF INPUT-OUTPUT INPUT-FG, COVER OUTPUT-FG, COVER OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE CASE SIZE/WEIGHT COOLING METHOD R10A-3 R10A-5 R10A-12 R10A-15 AC85 - 132 1f or DC110 - 170 0.24typ (Io=100%) 47 - 440 or DC 64typ 70typ 75typ 76typ 20typ (Io=100%) (At cold start) 0.5max (According to UL, CSA and DEN-AN) 3 5 12 15 2.0 2.0 0.9 0.7 20max 20max 48max 60max 40max 40max 100max 120max 80max 80max 120max 120max 140max 140max 160max 160max 120max 120max 150max 150max 160max 160max 180max 180max 50max 50max 120max 150max 60max 60max 150max 180max 20max 20max 48max 60max 100max (ACIN 85V, Io=100%) 10typ (ACIN 85V, Io=100%, 0 to +50C) 20typ (ACIN 100V, Io=100%, 0 to +50C) 2.85 - 3.6 4.5 - 5.5 10.8 - 13.2 13.5 - 16.5 Works over 105% of rating and recovers automatically (ACIN 100V) 4.00V min Works over 115% of rating (By zener diode clamping) LED (Green) 78typ 24 0.5 96max 150max 120max 160max 150max 180max 240max 290max 96max 21.6 - 26.4 Not provided Not provided AC2,000V 1minute, Cutoff current = 10mA max, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA max, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA max, DC500V 50MW min (At Room Temperature) -10 to +60C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL Complies with DEN-AN Complies with FCC-B, VCCI-B 26X68X68mm (WXHXD) /150g max (without cover) Convection Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Please contact us about safety approvals for the model with option. Avoid prolonged use under over-load. Series/Parallel operation with other model is not possible. Derating is required when operated with case cover. R-2 R10A-24 R10A R External view 22 (10) max Cover FG AC( L) AC(N) 68 CN1 2-M3 Mounting Hole 37 FG AC(L) AC(N) Safety Cover (61) 9.5 + - 7.5 CN2 Name Plate (13.5) + - Name Plate LED Voltage Adjust M3 50t0.5 (13) I/O Connector Mating Connector CN1 B3P5-VH CN2 B4P-VH (21) VHR-5N 3.5 63.5 Name Plate 2-M3 Mounting Hole 3.5 14 22.5 26 VHR-4N (Mfr : J.S.T.) Weight : 150g or less (without cover) Cover is optional Tolerance : t1 Dimensions in mm. Terminal Chain: SVH-21-P1.1 Loose: BVH-21-P1.1 (Mfr : J.S.T.) 14 Barrier strip type Connector type max 26t0.2 68 36 Mounting torque: 0.6N * m(6.3kgf * cm)max Performance data STATIC CHARACTERISTICS (R10A-5) RISE TIME & FALL TIME (R10A-5) 5.20 40 Io=100% 4.60 30 4.40 20 Ripple 4.20 mVp-p 4.80 DC Output RIPPLE V OUTPUT VOLTAGE Output Voltage 5.00 ACIN 100V Io=100% AC Input 10 0 50 60 70 80 90 INPUT VOLTAGE 100 110 120 130 20ms/DIV V 60Hz OVERCURRENT CHARACTERISTICS (R10A-5) DERATING CURVE 100 6.0 V 2 OUTPUT VOLTAGE OUTPUT VOLTAGE V 80 5.0 4.0 3.0 2.0 1Convection 2Forced Air (0.5m3/min) 40 20 0 -10 1.0 0 1 60 0 10 20 30 40[30] 50[40] 60[50] 70[60] Please see Electric Characteristics for shaded Ripple, Ripple Noise. 1.0 OUTPUT CURRENT 2.0 A AMBIENT TEMPERATURE Inside of means with cover R-3 Ordering information AC-DC Power Supplies Enclosed type R15A R R 1 15A 2 -5 3 -O 4 1Series name 2Output wattage 3Output voltage 4Optional *2 C :with Coating G :Low leakage current J :Connector type N :with Cover R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT R15A-3 9 3V 3.0A R15A-5 15 5V 3A R15A-9 15.3 9V 1.7A R15A-12 15.6 12V 1.3A R15A-15 15 15V 1.0A R15A-18 15.3 18V 0.85A R15A-24 16.8 24V 0.7A R15A-15 R15A-18 R15A-24 75typ 76typ 78typ 15 1.0 60max 120max 120max 160max 150max 180max 150max 180max 60max 18 0.85 72max 120max 120max 160max 150max 180max 180max 200max 72max 24 0.7 96max 150max 120max 160max 150max 180max 240max 290max 96max SPECIFICATIONS INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS *1 *2 * * * MODEL VOLTAGE[V] ACIN 100V CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] INRUSH CURRENT[A] ACIN 100V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +50C RIPPLE[mVp-p] -10 - 0C 0 to +50C RIPPLE NOISE[mVp-p] -10 - 0C 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C *1 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION OPERATING INDICATION REMOTE SENSING REMOTE ON/OFF INPUT-OUTPUT INPUT-FG, COVER OUTPUT-FG, COVER OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE CASE SIZE/WEIGHT COOLING METHOD R15A-3 R15A-5 R15A-9 R15A-12 AC85 - 132 1f or DC110 - 170 0.37typ (Io=100%) 47 - 440 or DC 68typ 72typ 73typ 75typ 20typ (Io=100%) (At cold start) 0.5max (According to UL, CSA and DEN-AN) 3 5 9 12 3.0 3.0 1.7 1.3 20max 20max 36max 48max 40max 40max 100max 100max 80max 80max 120max 120max 140max 140max 160max 160max 120max 120max 150max 150max 160max 160max 180max 180max 50max 50max 90max 120max 60max 60max 120max 150max 20max 20max 36max 48max 100max (ACIN 85V, Io=100%) 10typ (ACIN 85V, Io=100%, 0 to +50C) 20typ (ACIN 100V, Io=100%, 0 to +50C) 2.85 - 3.6 4.5 - 5.5 8.1 - 9.9 10.8 - 13.2 13.5 - 16.5 16.2 - 19.8 21.6 - 26.4 Works over 105% of rating and recovers automatically (ACIN 100V) 4.00V min Works over 115% of rating (By zener diode clamping) LED (Green) Not provided Not provided AC2,000V 1minute, Cutoff current = 10mA max, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA max, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA max, DC500V 50MW min (At Room Temperature) -10 to +60C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL Complies with DEN-AN Complies with FCC-B, VCCI-B 30X69X84mm (WXHXD) / 200g max (without cover) Convection Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Please contact us about safety approvals for the model with option. Avoid prolonged use under over-load. Series/Parallel operation with other model is not possible. Derating is required when operated with case cover. R-4 R15A R External view 22 (10) CN1 FG AC(L) AC(N) (13.5) I/O Connector 69 FG AC(L) AC(N) 2-M3 Mounting Hole 36.5 + - Name Plate (13.5) CN2 LED M3 Cover Voltage Adjust Name Plate (63) (61) 7.5 9.5 + - max Safety Cover 55t0.5 Mating Housing 18.5 (23.5) CN2 B4P-VH VHR-4N (Mfr : J.S.T.) Weight : 200g or less (without cover) Cover is optional Tolerance : t1 Dimensions in mm. Terminal Chain: SVH-21-P1.1 Loose: BVH-21-P1.1 (Mfr : J.S.T.) 14 Barrier strip type Connector type 3.5 76 3 2-M3 Name Plate Mounting Hole 3.5 VHR-5N 16 25 30 34 B3P5-VH 5 1.75 CN1 max 74t0.5 84 5 Mounting torque: 0.6N * m(6.3kgf * cm)max Performance data STATIC CHARACTERISTICS (R15A-5) RISE TIME & FALL TIME (R15A-5) 5.20 40 Io=100% 4.60 30 4.40 20 Ripple 4.20 mVp-p 4.80 DC Output RIPPLE V OUTPUT VOLTAGE Output Voltage 5.00 ACIN 100V Io=100% AC Input 10 0 50 60 70 80 90 INPUT VOLTAGE 100 110 120 130 INRUSH CURRENT (R15A-5) 10A/DIV OVERCURRENT CHARACTERISTICS (R15A-5) V 6.0 OUTPUT VOLTAGE 20ms/DIV V 60Hz 5.0 4.0 Frequency 60Hz Load 100% Input voltage AC100V 3.0 2.0 1.0 0 1.0 2.0 OUTPUT CURRENT 3.0 A 4.0 10ms/DIV R-5 Ordering information AC-DC Power Supplies Enclosed type R25A R R 1 25A 2 -5 3 -O 4 1Series name 2Output wattage 3Output voltage 4Optional *2 C :with Coating G :Low leakage current J :Connector type N :with Cover R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT R25A-3 15 3V 5.0A R25A-5 25 5V 5A R25A-9 25.2 9V 2.8A R25A-12 25.2 12V 2.1A R25A-15 25.5 15V 1.7A R25A-18 25.2 18V 1.4A R25A-24 26.4 24V 1.1A R25A-15 R25A-18 R25A-24 76typ 77typ 79typ 15 1.7 60max 120max 120max 160max 150max 180max 150max 180max 60max 18 1.4 72max 120max 120max 160max 150max 180max 180max 200max 72max 24 1.1 96max 150max 120max 160max 150max 180max 240max 290max 96max SPECIFICATIONS INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS *1 *2 * * * MODEL VOLTAGE[V] ACIN 100V CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] INRUSH CURRENT[A] ACIN 100V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +50C RIPPLE[mVp-p] -10 - 0C 0 to +50C RIPPLE NOISE[mVp-p] -10 - 0C 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C *1 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION OPERATING INDICATION REMOTE SENSING REMOTE ON/OFF INPUT-OUTPUT INPUT-FG, COVER OUTPUT-FG, COVER OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE CASE SIZE/WEIGHT COOLING METHOD R25A-3 R25A-5 R25A-9 R25A-12 AC85 - 132 1f or DC110 - 170 0.58typ (Io=100%) 47 - 440 or DC 69typ 73typ 75typ 76typ 20typ (Io=100%) (At cold start) 0.5max (According to UL, CSA and DEN-AN) 3 5 9 12 5.0 5.0 2.8 2.1 20max 20max 36max 48max 40max 40max 100max 100max 80max 80max 120max 120max 140max 140max 160max 160max 120max 120max 150max 150max 160max 160max 180max 180max 50max 50max 90max 120max 60max 60max 120max 150max 20max 20max 36max 48max 200max (ACIN 85V, Io=100%) 10typ (ACIN 85V, Io=100%, 0 to +50C) 20typ (ACIN 100V, Io=100%, 0 to +50C) 2.85 - 3.6 4.5 - 5.5 8.1 - 9.9 10.8 - 13.2 13.5 - 16.5 16.2 - 19.8 Works over 105% of rating and recovers automatically (ACIN 100V) 4.00 - 5.25V Works at 115 - 140% of rating LED (Green) Not provided Not provided AC2,000V 1minute, Cutoff current = 10mA max, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA max, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA max, DC500V 50MW min (At Room Temperature) -10 to +60C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL Complies with DEN-AN Complies with FCC-B, VCCI-B 31X69X104mm (WXHXD) / 250g max (without cover) Convection Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Please contact us about safety approvals for the model with option. Avoid prolonged use under over-load. Series/Parallel operation with other model is not possible. Derating is required when operated with case cover. R-6 21.6 - 26.4 R25A R External view CN1 FG AC(L) AC(N) (13.5) I/O Connector 69 FG AC(L) AC(N) 2-M3 Mounting Hole 36.5 + - Name Plate (13.5) CN2 LED M3 Cover Voltage Adjust Name Plate (63) (61) 7.5 + - max 9.5 22 (10) Safety Cover 70t0.5 Mating Housing 23.5 (23.5) VHR-5N CN2 B4P-VH VHR-4N 3.5 (Mfr : J.S.T.) Weight : 250g or less (without cover) Cover is optional Tolerance : t1 Dimensions in mm. Terminal Chain: SVH-21-P1.1 Loose: BVH-21-P1.1 (Mfr : J.S.T.) Barrier strip type Connector type 96 Name Plate 3 3.5 B3P5-VH 3-M3 Mounting Hole 17.5 26 31 35 CN1 14 max 83t0.5 90t0.5 104 9 Mounting torque: 0.6N * m(6.3kgf * cm)max Performance data STATIC CHARACTERISTICS (R25A-5) RISE TIME & FALL TIME (R25A-5) 5.20 40 Io=100% 4.60 30 4.40 20 Ripple 4.20 ACIN 100V Io=100% mVp-p 4.80 DC Output RIPPLE OUTPUT VOLTAGE V Output Voltage 5.00 AC Input 10 0 50 60 70 80 90 INPUT VOLTAGE 100 110 120 130 INRUSH CURRENT (R25A-5) 10A/DIV OVERCURRENT CHARACTERISTICS (R25A-5) V 6.0 OUTPUT VOLTAGE 20ms/DIV V 60Hz 5.0 4.0 Frequency 60Hz Load 100% Input voltage AC100V 3.0 2.0 1.0 0 2.0 4.0 OUTPUT CURRENT 6.0 A 8.0 10ms/DIV R-7 Ordering information AC-DC Power Supplies Enclosed type R50A R R 1 50A 2 -5 3 -O 4 1Series name 2Output wattage 3Output voltage 4Optional *2 C :with Coating G :Low leakage current J :Connector type N :with Cover R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT R50A-3 30 3V 10A R50A-5 50 5V 10A R50A-9 50.4 9V 5.6A R50A-12 50.4 12V 4.2A R50A-15 51 15V 3.4A R50A-18 50.4 18V 2.8A R50A-24 52.8 24V 2.2A R50A-15 R50A-18 R50A-24 81typ 82typ 83typ 15 3.4 60max 120max 120max 160max 150max 180max 150max 180max 60max 18 2.8 72max 120max 120max 160max 150max 180max 180max 200max 72max 24 2.2 96max 150max 120max 160max 150max 180max 240max 290max 96max SPECIFICATIONS INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS *1 *2 * * * MODEL VOLTAGE[V] ACIN 100V CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] INRUSH CURRENT[A] ACIN 100V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +50C RIPPLE[mVp-p] -10 - 0C 0 to +50C RIPPLE NOISE[mVp-p] -10 - 0C 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C *1 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION OPERATING INDICATION REMOTE SENSING REMOTE ON/OFF INPUT-OUTPUT INPUT-FG, COVER OUTPUT-FG, COVER OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE CASE SIZE/WEIGHT COOLING METHOD R50A-3 R50A-5 R50A-9 R50A-12 AC85 - 132 1f or DC110 - 170 1.1typ (Io=100%) 47 - 440 or DC 74typ 78typ 79typ 80typ 30typ (Io=100%) (At cold start) 0.5max (According to UL, CSA and DEN-AN) 3 5 9 12 10 10 5.6 4.2 20max 20max 36max 48max 40max 40max 100max 100max 80max 80max 120max 120max 140max 140max 160max 160max 120max 120max 150max 150max 160max 160max 180max 180max 50max 50max 90max 120max 60max 60max 120max 150max 20max 20max 36max 48max 200max (ACIN 85V, Io=100%) 10typ (ACIN 85V, Io=100%, 0 to +50C) 20typ (ACIN 100V, Io=100%, 0 to +50C) 2.85 - 3.6 4.5 - 5.5 8.1 - 9.9 10.8 - 13.2 13.5 - 16.5 16.2 - 19.8 Works over 105% of rating and recovers automatically (ACIN 100V) 4.00 - 5.25V Works at 115 - 140% of rating LED (Green) Not provided Not provided AC2,000V 1minute, Cutoff current = 10mA max, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA max, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA max, DC500V 50MW min (At Room Temperature) -10 to +60C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL Complies with DEN-AN Complies with FCC-B, VCCI-B 33X85X119mm (WXHXD) / 300g max (without cover) Convection Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Please contact us about safety approvals for the model with option. Avoid prolonged use under over-load. Parallel operation is not possible. Derating is required when operated with case cover. R-8 21.6 - 26.4 R50A R External view I/O Connector CN1 FG AC(L) AC(N) B3P5-VH VHR-5N CN2 B4P-VH VHR-4N Safety Cover (14) (24) Mating Housing CN1 M3 2-M3 Mounting Hole 35 + - Name Plate Cover 70t0.5 3.5 (Mfr : J.S.T.) Weight : 300g or less (without cover) Cover is optional Tolerance : t1 Dimensions in mm. Terminal Chain: SVH-21-P1.1 Loose: BVH-21-P1.1 (Mfr : J.S.T.) 23 3 111 Name Plate 2-M3 Mounting Hole 3.5 17.5 30 33 37 FG AC(L) AC(N) CN2 Name Plate Voltage Adjust (72) (61) (13.5) 7.5 9.5 + - LED max 85 17.5 (10.5) max 14 100t0.5 119 14 Barrier strip type Connector type Mounting torque: 0.49N*m(5.0kgf*cm)max Performance data STATIC CHARACTERISTICS (R50A-5) RISE TIME & FALL TIME (R50A-5) 5.40 80 70 Output Voltage Ripple 50 4.60 40 4.40 DC Output AC Input 30 4.20 50 60 70 80 90 INPUT VOLTAGE 100 110 120 130 20 20ms/DIV V 60Hz INRUSH CURRENT (R50A-5) 10A/DIV OVERCURRENT CHARACTERISTICS (R50A-5) 6.0 V mVp-p 60 Io=100% 4.80 0 OUTPUT VOLTAGE ACIN 100V Io=100% 5.00 RIPPLE OUTPUT VOLTAGE V 5.20 5.0 4.0 Frequency 60Hz Load 100% Input voltage AC100V 3.0 2.0 1.0 0 5 OUTPUT CURRENT 10 A 15 10ms/DIV R-9 R100U R External view Weight : 600g or less (without cover) Cover is optional Tolerance : t1 Dimensions in mm. Mounting torque: 1.2N * m(12.8kgf * cm)max Performance data STATIC CHARACTERISTICS (R100U-5) RISE TIME & FALL TIME (R100U-5) OVERCURRENT CHARACTERISTICS (R100U-5) DERATING CURVE R-11 Ordering information AC-DC Power Supplies Enclosed type R150U R R 1 150 2 U 3 -5 -O 4 5 1Series name 2Output wattage 3UL recognized,TuV approved,CSA certified 4Output voltage 5Optional *2 C :with Coating G :Low leakage current N :with Cover R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT R150U-3 90 3V 30A R150U-5 150 5V 30A R150U-9 153 9V 17A R150U-12 156 12V 13A R150U-15 150 15V 10A R150U-18 153 18V 8.5A R150U-24 156 24V 6.5A R150U-15 R150U-18 R150U-24 82typ 83typ 84typ 15 10 60max 120max 120max 160max 150max 180max 150max 180max 60max 18 8.5 72max 120max 120max 160max 150max 180max 180max 200max 72max 24 6.5 96max 150max 120max 160max 150max 180max 240max 290max 96max SPECIFICATIONS INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS *1 *2 * * * MODEL VOLTAGE[V] ACIN 100V CURRENT[A] FREQUENCY[Hz] EFFICIENCY[%] INRUSH CURRENT[A] ACIN 100V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +50C RIPPLE[mVp-p] -10 - 0C 0 to +50C RIPPLE NOISE[mVp-p] -10 - 0C 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C *1 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION OPERATING INDICATION REMOTE SENSING REMOTE ON/OFF INPUT-OUTPUT INPUT-FG, COVER OUTPUT-FG, COVER OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE CASE SIZE/WEIGHT COOLING METHOD R150U-3 R150U-5 R150U-9 R150U-12 AC85 - 132 1f or DC110 - 170 4.2typ (Io=100%) 47 - 440 or DC 74typ 78typ 79typ 80typ 15typ (Io=100%) 0.5max (60Hz, According to UL, CSA and DEN-AN) 3 5 9 12 30 30 17 13 20max 20max 36max 48max 40max 40max 100max 100max 80max 80max 120max 120max 140max 140max 160max 160max 120max 120max 150max 150max 160max 160max 180max 180max 50max 50max 90max 120max 60max 60max 120max 150max 20max 20max 36max 48max 200max (ACIN 85V, Io=100%) 20typ (ACIN 100V, Io=100%, 0 to +50C) 10typ (ACIN 85V, 2.85 - 3.6 4.5 - 5.5 8.1 - 9.9 10.8 - 13.2 Works over 105% of rating and recovers automatically 4.00 - 5.25V Works at 115 - 140% of rating LED (Green) Io=100%, 0 to +50C) 13.5 - 16.5 16.2 - 19.8 Provided Not provided AC2,000V 1minute, Cutoff current = 10mA max, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA max, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA max, DC500V 50MW min (At Room Temperature) -10 to +60C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, CSA C22.2 No.60950-1, EN60950-1 Complies with DEN-AN and IEC60950-1 Complies with FCC-B, VCCI-B 44.5X93X175mm (WXHXD) / 900g max (without cover) Convection Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Please contact us about safety approvals for the model with option. Avoid prolonged use under over-load. Parallel operation with other model is not possible. Derating is required when operated with case cover. R-12 21.6 - 26.4 R150U R External view Weight : 900g or less (without cover) Cover is optional Tolerance : t1 Dimensions in mm. Mounting torque: 1.2N * m(12.8kgf * cm)max Performance data STATIC CHARACTERISTICS (R150U-5) RISE TIME & FALL TIME (R150U-5) OVERCURRENT CHARACTERISTICS (R150U-5) DERATING CURVE R-13