The UPC2763TB is a Silicon Monolithic integrated circuit
which is manufactured using the NESAT™ III process. The
NESAT™ III process produces transistors with fT approaching
20 GHz. The UPC2763TB is pin compatible and has compa-
rable performance to the larger UPC2763T, so it is suitable for
use as a replacement to help reduce system size. The IC is
housed in a 6 pin super minimold or SOT-363 package.
Operating on a 3 volt supply this IC is ideally suited for hand-
held, portable designs.
Stringent quality assurance and test procedures ensure
the highest reliability and performance.
3 V, SUPER MINIMOLD
BIPOLAR ANALOG INTEGRATED CIRCUIT
MEDIUM POWER SI MMIC AMPLIFIER
UPC2763TB
GAIN vs. FREQUENCY AND
TEMPERATURE
Frequency, f (MHz)
•HIGH OUTPUT POWER: PSAT = +11 dBm at 900 MHz
•LOW VOLTAGE: 3.0 V TYP, 2.7 V MIN
•WIDE BANDWIDTH: 2.7 GHz at -3 dB
•HIGH GAIN: 20 dB at 1.9 GHz
•SUPER SMALL PACKAGE: SOT-363 package
•TAPE AND REEL PACKAGING OPTION AVAILABLE
FEATURES
DESCRIPTION
G ,niaG rewoP noitresnI
P
)Bd(
Note:
1. π/4 QPSK modulated wave input, data rate 42 kbps.
BT3672CPUREBMUN TRAP
60SENILTUO EGAKCAP
SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX
ICC 5372Am)langis on( tnerruC tiucriC
GS320281BdzHM 009 = f,niaG langiS llamS
421281BdzHM 0091 = f
fUUpper Limit Operating Frequency
(The gain at fu is 3 dB down from the gain at 0.1 GHz) GHz 2.3 2.7
P1dBOutput Power at 1 dB Compression Point, f = 900 MHz dBm +7 +9.5
f = 1900 MHz dBm +4 +6.5
PSAT 11mBdzHM 009 = f,rewoP tuptuO detarutaS
8mBdzHM 0091 = f
0.75.5BdzHM 009 = f,erugiF esioNFN
5.75.5BdzHM 0091 = f
RLIN 118BdzHM 009 = f,ssoL nruteR tupnI
118BdzHM 0091 = f
RLOUT 75BdzHM 009 = f,ssoL nruteR tuptuO
96BdzHM 0091 = f
0352BdzHM 009 = f,noitalosILOSI
9242BdzHM 0091 = f
OIP3 SSB Output Third Order Intercept Point 71+mBdzHM 209 ,009 = f
POUT 11+mBdzHM 2091 ,0091 = fmBd 4+ =
PADJAdjacent Channel Power, Δf = ±16-cBdzHK 05
f = 900 MHz, π/4 QPSK wave1,Δf = ±26-cBdzHK 001
PO = +4 dBm
ELECTRICAL CHARACTERISTICS (TA = 25°C, ZL = ZS = 50 Ω, VCC = 3.0 V)
T
A
= +85°C
24
22
20
18
16
14
12
10
8
6
0.1 0.3 1.0 3.0
T
A
= +25°C
T
A
= +85°C
T
A
= -40°C
T
A
= +25°C
T
A
= -40°C
V
CC
= 3.0 V
DISCONTINUED
UPC2763TB
ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C)
TEST CIRCUIT
Noise Figure, NF (dB)
Frequency, f (GHz)
Supply Voltage, VCC (V)
Circuit Current, I
CC
(mA)
NOISE FIGURE AND INSERTION
POWER GAIN vs.
FREQUENCY AND VOLTAGE
Circuit Current, I
CC
(mA)
SYMBOLS PARAMETERS UNITS RATINGS
VCC Supply Voltage V 3.6
ICC Total Supply Current mA 70
PIN Input Power dBm +10
PTTotal Power Dissipation2mW 200
TOP Operating Temperature °C -40 to +85
TSTG Storage Temperature °C -55 to +150
SYMBOLS PARAMETERS UNITS MIN TYP MAX
VCC Supply Voltage V 2.7 3 3.3
TOP Operating Temperature °C -40 25 85
RECOMMENDED OPERATING CONDITIONS
Notes:
1. Operation in excess of any one of these parameters may result
in permanent damage.
2. Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB (TA = 85°C).
INPUT AND OUTPUT RETURN LOSS vs.
FREQUENCY
Return Loss (dB)
Insertion Power Gain, G
P
(dB)
Frequency, f (GHz)
Operating Temperature, TOP (°C)
CIRCUIT CURRENT vs.
SUPPLY VOLTAGE
TYPICAL PERFORMANCE CURVES (TA = 25°C)
CIRCUIT CURRENT vs.
OPERATING TEMPERATURE
VCC
50 Ω
OUT
1000 pF
IN
50 Ω
1000 pF
1000 pF
6
14
2, 3, 5
L = 300 nH
50
40
30
10
0
20
-60 -40 -20 0 20 40 60 80 100
No signal
VCC = 3.0 V
50
40
30
20
10
0
0123
4
No signal
0.1 0.3 1.0 3.0
0
-10
-20
-30
-40
V
CC
= 3.0V
RL
in
RL
out
V
CC
= 2.7 V
V
CC
= 3.0 V
V
CC
= 3.3 V
V
CC
= 2.7 V
V
CC
= 3.0 V
V
CC
= 3.3 V
24
22
20
18
16
14
12
10
8
6
0.1 0.3 1.0 3.0
G
P
NF
7
6
5
4
3
DISCONTINUED
UPC2763TB
TYPICAL PERFORMANCE CURVES (TA = 25°C)
OUTPUT POWER vs.
INPUT POWER AND VOLTAGE
Input Power, PIN (dBm)Frequency, f (GHz)
Isolation, ISOL (dB)
OUTPUT POWER vs.
INPUT POWER AND VOLTAGE
Output Power, P
OUT
(dBm)
OUTPUT POWER vs.
INPUT POWER AND TEMPERATURE
ISOLATION vs. FREQUENCY
SATURATED OUTPUT POWER vs.
FREQUENCY AND VOLTAGE
Input Power, PIN (dBm)
Frequency, f (GHz)
Saturated Output Power, P
O(SAT)
(dBm) Output Power, P
OUT
(dBm)
Input Power, PIN (dBm)
Output Power, P
OUT
(dBm)
OUTPUT POWER vs.
INPUT POWER AND TEMPERATURE
0.1 0.3 1.0 3.0
0
-10
-20
-30
-40
-50
V
CC
= 3.0V
-25 -20 -15 -10 -5 0
15
10
5
0
-5
-10
f = 900 MHZ
V
CC
= 3.3V
V
CC
= 3.0V
V
CC
= 2.7V
15
10
5
0
-5
-10
-20 -15 -10 -5
f = 0.9 GHZ
V
CC
= 3.0 V
T
A
= +85°C
0+5
T
A
= -40°C
T
A
= +25°C
T
A
= +85°C
T
A
= -40°C
-25 -20 -15 -10 -5 0
15
10
5
0
-5
-10
f = 1.9 GHZ V
CC
= 3.3V
V
CC
= 3.0V
V
CC
= 2.7V
Output Power, P
OUT
(dBm)
Input Power, PIN (dBm)
f = 1.9 GHz
V
CC
= 3.0 V
T
A
= -40°C
-25 -20 -15 -10 -5 0
15
10
5
0
-5
-10
T
A
= +85°C
T
A
= +25°C
T
A
= +85°C
T
A
= +25°C
T
A
= -40°C
V
CC
= 3.0 V
V
CC
= 3.3 V
V
CC
= 2.7 V
PIN = -3 dBm
+15
+13
+11
+9
+7
+5
+3
0.1 0.3 1.0 3.0
DISCONTINUED
UPC2763TB
Output Power of Each Tone, PO (EACH) (dBm)
Frequency, f (GHz)
Third Order Intermodulation Distortion, IM3 (dBc)
Output Power, P
OUT
(dBm)
SATURATED OUTPUT POWER vs.
FREQUENCYAND TEMPERATURE
THIRD ORDER INTERMODULATION DISTORTION vs.
OUTPUT POWER OF EACH TONE AND VOLTAGE
TYPICAL PERFORMANCE CURVES (TA = 25°C)
THIRD ORDER INTERMODULATION DISTORTION vs.
OUTPUT POWER OF EACH TONE AND VOLTAGE
Output Power of Each Tone, PO (EACH) (dBm)
Third Order Intermodulation Distortion, IM3 (dBc)
T
A
= -40°C
T
A
= +85°C
PIN = -3 dBm
+15
+13
+11
+9
+7
+5
+3
0.1 0.3 1.0 3.0
TA = +25°C
-60
-50
-40
-30
-20
-10
-15 -10 -5
f
1
= 0.900 GH
Z
f
2
= 0.902 GH
Z
0+5 +10
V
CC
= 2.7 V
0
V
CC
= 3.3 V
V
CC
= 3.0 V
-60
-50
-40
-30
-20
-10
-15 -10 -5
f1 = 1.900 GH
Z
f
2 = 1.902 GH
Z
0+5 +10
VCC = 2.7 V
0
VCC = 3.3 V
VCC = 3.0 V
DISCONTINUED
UPC2763TB
VCC = VOUT = 3.0 V, ICC = 28 mA
FREQUENCY S11 S21 S12 S22 K
GHz MAG ANG MAG ANG MAG ANG MAG ANG
0.1 0.231 -1.4 10.210 -3.8 0.023 2.4 0.406 -4.1 1.68
0.2 0.242 -0.2 10.305 -8.5 0.023 7.8 0.412 -7.5 1.66
0.3 0.250 2.7 10.464 -12.9 0.024 9.3 0.407 -9.9 1.58
0.4 0.425 2.8 10.655 -18.2 0.024 13.4 0.407 -13.9 1.55
0.5 0.242 2.0 10.863 -22.8 0.026 16.1 0.405 -17.6 1.44
0.6 0.241 -2.2 11.093 -28.1 0.027 19.9 0.414 -21.6 1.37
0.7 0.263 -5.3 11.544 -33.2 0.028 22.3 0.419 -24.6 1.25
0.8 0.291 -5.6 11.843 -39.0 0.029 22.5 0.424 -27.7 1.16
0.9 0.316 -5.1 12.291 -45.1 0.029 23.9 0.424 -31.9 1.09
1.0 0.322 -4.0 12.676 -52.4 0.030 25.6 0.425 -37.1 1.02
1.1 0.318 -5.4 13.066 -59.8 0.031 24.1 0.438 -42.5 0.96
1.2 0.309 -9.0 13.311 -67.3 0.031 27.0 0.442 -47.8 0.96
1.3 0.322 -14.2 13.661 -75.8 0.033 28.8 0.441 -51.2 0.90
1.4 0.344 -20.6 13.845 -83.9 0.033 28.5 0.434 -56.0 0.87
1.5 0.371 -23.7 13.824 -93.0 0.035 30.1 0.435 -62.2 0.82
1.6 0.380 -27.5 13.890 -101.5 0.035 28.1 0.439 -68.9 0.80
1.7 0.388 -30.6 13.634 -110.5 0.036 29.2 0.439 -74.6 0.78
1.8 0.378 -36.4 13.236 -119.6 0.035 29.9 0.428 -81.3 0.84
1.9 0.378 -42.1 12.724 -127.9 0.035 30.9 0.411 -87.0 0.89
2.0 0.375 -46.6 12.290 -136.1 0.035 32.9 0.393 -93.4 0.94
2.1 0.369 -50.5 11.707 -144.0 0.035 33.0 0.385 -99.6 0.99
2.2 0.351 -53.8 11.130 -151.7 0.036 35.7 0.373 -104.9 1.06
2.3 0.331 -59.8 10.524 -159.1 0.036 36.8 0.359 -110.3 1.13
2.4 0.306 -66.4 9.824 -165.9 0.034 38.7 0.336 -117.5 1.31
2.5 0.300 -73.1 9.152 -172.3 0.035 40.1 0.321 -123.3 1.41
2.6 0.294 -75.8 8.583 -178.2 0.034 43.8 0.306 -129.4 1.55
2.7 0.290 -77.1 8.029 176.2 0.035 46.3 0.299 -133.9 1.58
2.8 0.270 -77.7 7.610 170.6 0.037 47.7 0.288 -138.6 1.63
2.9 0.248 -78.7 7.240 166.1 0.039 51.1 0.270 -143.6 1.67
3.0 0.219 -82.3 6.827 161.2 0.039 53.6 0.253 -150.1 1.79
3.1 0.198 -88.7 6.516 156.9 0.040 55.1 0.244 -156.2 1.88
TYPICAL SCATTERING PARAMETERS (TA = +25°C, VCC = VOUT = 3.0 V)
S11 S22
1.0 GHz
2.0 GHz
0.1 GHz
3.0 GHz
0.1 GHz
3.0 GHz
2.0 GHz
1.0 GHz
DISCONTINUED
OUTLINE DIMENSIONS (Units in mm)
PACKAGE OUTLINE S06
LEAD CONNECTIONS
(Bottom View)(Top View)
1. INPUT
2. GND
3. GND
4. OUTPUT
5. GND
6. VCC
UPC2763TB
ORDERING INFORMATION
YTQREBMUN TRAP
UPC2763TB-E3-A 3K/Reel
Note:
Embossed Tape, 8 mm wide. Pins 1, 2 and 3 face perforated side
of tape.
noitpircseDdeilppAemaN niP.oN niP
Voltage (V)
1 Input – Signal input pin. An internal matching circuit, configured with
resistors, enables 50 Ω connection over a wide bandwidth. A
multi-feedback circuit is designed to cancel the deviations of
hFE and resistance. This pin must be coupled to the signal
source with a blocking capacitor.
dna nip siht neewteb rotcudni na tcennoC .nip tuptuo langiStuptuO4
VCC to supply current to the internal output transistors.
6 VCC 2.7 to 3.3 Power supply pin. This pin should be externally equipped with
a bypass capacitor to minimize ground impedance.
2 GND 0 Ground pins. These pins should be connected to system
draob eht no nrettap dnuorG .ecnatcudni muminim htiw dnuorg3
snip dnuorg eht llA .elbissop sa ediw sa demrof eb dluohs5
must be connected together with wide ground pattern to
minimize impedance difference.
PIN DESCRIPTIONS
Internal Equivalent
Circuit
3
2
1
4
5
6
A2C
3
2
1
4
5
6
+0.1
-0
DOT ON
BACK SIDE
+0.1
-0.5
0 ~0.1
0.2
0.15
3
2
16
5
4
0.65
1.3
2.0±0.2
0.65
2.1±0.1
1.25±0.1
0.9 ± 0.1
0.7
1
35
2
4
6
EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279
24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM
0002/12/60
DATA SUBJECT TO CHANGE WITHOUT NOTICE
DISCONTINUED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
CEL:
UPC2763TB-EVAL