F18 Series * Industry Standard Package and Circuits * Power Control Building Blocks * Nine Circuits to Chose from * UL Recognized E72445 AVAILABLE OPTIONS ELECTRICAL SPECIFICATIONS Description Symbol 27 42 57 92 Maximum DC Output Current (Tc = 85C) ID 25 A 40 A 55 A 90 A 105 A Maximum Voltage Drop @ Amps Peak VF 1.55V @ 75 A 1.4V @ 120 A 1.4V @ 165 A 1.4V @ 270 A 1.65V @ 300 A -40 - 125C Operating Junction Temperature Range 107 (2) TJ -40 - 125C -40 - 125C -40 - 125C -40 - 125C Critical Rate of Rise of On-State Current @ TJ=125C [A/s] di/dt 100 100 100 100 100 Critical Rate of Rise of Off-State Voltage [V/s] dv/dt 1000 1000 1000 1000 1000 VRRM 400 (120 VAC) 600 (240 VAC) 800 (280 VAC) Maximum Non-Repetitive Surge Current (1/2 Cycle, 60 Hz) [A] ITSM 400 1000 1200 (480 VAC) 1400 (530 VAC) 1600 (600 VAC) 1500 1950 2250 Maximum IT for Fusing (t=8.3ms) [Asec] I2T 670 4150 9350 15800 25000 Maximum Required Gate Current to Trigger @ 25C [mA] IGT 150 150 150 150 150 Maximum Required Gate Voltage to Trigger @ 25C [V] VGT 3.0 3.0 3.0 3.0 3.0 PG(AV) 0.5 0.5 0.5 0.5 0.5 Maximum Peak Reverse Gate Voltage [V] VGM 5.0 5.0 5.0 5.0 5.0 Maximum Thermal Resistance, Junction to Ceramic Base per Chip [C/W] Isolation Voltage [Vrms] RJC 0.4 0.28 0.25 0.14 0.135 VISOL 2500 2500 2500 2500 2500 Repetitive Peak Reverse Voltage (AC Line Nominal) [Vpk] Average Gate Power [W] GENERAL SPECIFICATIONS Description Weight (typical) Torque Required GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Available only in SD and SDK circuit configuration. 4.75 oz (135g) Terminal Stud Screw : 30 in. lbs. Mounting Screws : 20 in. lbs. MECHANICAL SPECIFICATIONS CIRCUIT DIAGRAMS AGENCY APPROVALS E72445 Rev 031710 ANNEX - ENVIROMENTAL INFORMATION