MCH3408
No.7011-1/4
Features
•Low ON-resistance.
•Ultrahigh-speed switching.
•4V dri ve.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Drain-to-Source Voltage VDSS 30 V
Gate-to-Source Voltage VGSS ±20 V
Drain Current (DC) ID1.4 A
Drain Current (Pulse) IDP PW≤10µs, duty cycle≤1% 5.6 A
Allowable Power Dissipation PDMounted on a ceramic board (900mm2✕0.8mm) 0.8 W
Channel Temperature Tch 150 °C
Storage Temperature Tstg --55 to +150 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Drain-to-Source Breakdown Voltage V(BR)DSS ID=1mA, VGS=0 30 V
Zero-Gate Voltage Drain Current IDSS VDS=30V, VGS=0 1 µA
Gate-to-Source Leakage Current IGSS VGS=±16V, VDS=0 ±10 µA
Cutoff Voltage VGS(off) VDS=10V, ID=1mA 1.2 2.6 V
Forward T ransfer Admittance yfsVDS=10V, ID=700mA 0.77 1.1 S
RDS(on)1 ID=700mA, VGS=10V 230 300 mΩ
Static Drain-to-Source On-State Resistance
RDS(on)2 ID=400mA, VGS=4V 400 560 mΩ
Marking : KH Continued on next page.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENN7011
MCH3408
Package Dimensions
unit : mm
2167A
[MCH3408]
71801 TS IM TA-3227
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
N-Channel Silicon MOSFET
Ultrahigh-Speed Switching Applications
1 : Gate
2 : Source
3 : Drain
SANYO : MCPH3
0.250.25
0.07
2.1
1.6
2.0
0.65
0.3
0.85
0.15
12
3
12
3
MCH3408
No.7011-2/4
Continued from preceding page. Ratings
Parameter Symbol Conditions min typ max Unit
Input Capacitance Ciss VDS=10V, f=1MHz 65 pF
Output Capacitance Coss VDS=10V, f=1MHz 14 pF
Reverse Transfer Capacitance Crss VDS=10V, f=1MHz 8 pF
Turn-ON Delay Time td(on) See specified Test Circuit 5 ns
Rise T ime trSee specified Test Circuit 4 ns
Turn-OFF Delay Time td(off) See specified Test Circuit 11 ns
Fall Time tfSee specified Test Circuit 3 ns
Total Gate Charge Qg VDS=10V, VGS=10V, ID=1.4A 2.5 nC
Gate-to-Source Charge Qgs VDS=10V, VGS=10V, ID=1.4A 0.6 nC
Gate-to-Drain “Miller” Charge Qgd V DS=10V, VGS=10V, ID=1.4A 0.3 nC
Diode Forward Voltage VSD IS=1.4A, VGS=0 0.87 1.2 V
Switching Time Test Circuit
0.2
0.4
0.6
0.8
1.0
1.2
1.4
--60 --40 --20 0 20 40 60 80 100 120 140 160
234 6785910
IT03296
0
0
0.5
1.0
2.0
0.2
1.5
0
100
200
300
400
500
600
700
800
0
0.4 0.6 0.8 1.0
4V
5V
IT03294
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
IT03295
IT03297
100
200
300
400
500
600
700
800
0
ID=0.7A, VGS=10V
ID=0.4A, VGS=4V
VGS=3V
6V
8V
10V
VDS=10V
ID=0.4A 0.7A
Ta=25°C
RDS(on) -- VGS
ID -- VDS ID -- VGS
RDS(on) -- Ta
Static Drain-to-Source
On-State Resistance, RDS(on) -- mΩ
Static Drain-to-Source
On-State Resistance, RDS(on) -- mΩ
Gate-to-Source Voltage, VGS -- V
Drain-to-Source Voltage, VDS -- V
Drain Current, ID -- A
Gate-to-Source Voltage, VGS -- V
Drain Current, ID -- A
Ambient Temperature, Ta -- °C
--25°C
Ta=75°C
Ta= --25°C
25°C
75°C
25°C
PW=10µs
D.C.≤1%
P.G 50Ω
G
S
D
ID=700mA
RL=21.4Ω
VDD=15V
VOUT
MCH3408
VIN
10V
0V
VIN
MCH3408
No.7011-3/4
0 0.5 1.0 1.5 2.0 2.5
0
2
4
6
8
10
IT03302
0
020 40
0.2
0.4
0.6
0.8
1.0
60 80 100 120 140 160
IT03304
2
3
5
7
2
3
5
7
2
3
5
7
10
1.0
0.1
0.01 23 57 23 57
1.00.1 10 23 5
IT03303
IDP=5.6A
ID=1.4A
Operation in this
area is limited by RDS(on).
100µs
100ms
DC operation
1ms
10ms
<10µs
50.1 1.0
2735723
3
2
5
10
7
5
3
2
1.0
VDD=15V
VGS=10V
td(on)
td(off)
tr
tf
IT03300
IT03298
0.01 0.1
23 57 2 2357
1.0 3
3
1.0
2
0.1
7
5
3
2
VDS=10V
IT03299
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
0.01
0.1
5
1.0
7
5
3
2
7
5
3
2
3
2
VGS=0
--25°C
25°C
Ta=75°C
0 5 10 15 20 25 30
3
10
100
2
7
5
3
7
5
IT03301
Ciss
Coss
Crss
f=1MHz
VDS=10V
ID=1.4A
--25°C
25°C
Ta=75°C
Ta=25°C
Single pulse
Mounted on a ceramic board(900mm
2
✕0.8mm)
Mounted on a ceramic board(900mm
2
✕0.8mm)
SW Time -- IDCiss, Coss, Crss -- VDS
y
fs -- IDIF -- VSD
Drain Current, ID -- A
Switching Time, SW Time -- ns
Drain Current, ID -- A
Forward Transfer Admittance,
y
fs -- S
Diode Forward Voltage, VSD -- V
Forward Current, IF -- A
Drain-to-Source Voltage, VDS -- V
Ciss, Coss, Crss -- pF
VGS -- Qg
PD -- Ta
A S O
Total Gate Charge, Qg -- nC
Gate-to-Source Voltage, VGS -- V
Ambient Temperature, Ta -- °C
Allowable Power Dissipation, PD -- W
Drain-to-Source Voltage, VDS -- V
Drain Current, ID -- A
MCH3408
No.7011-4/4
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of July, 2001. Specifications and information herein are subject
to change without notice.
PS
