AWB7221 2.30 GHz to 2.70 GHz Small-Cell Power Amplifier Module PRELIMINARY DATA SHEET - Rev 1.1 FEATURES * InGaP HBT Technology * 2.5% EVM @ +28 dBm (OFDMA) * 31 dB Gain * Integrated Step Attenuator * Integrated Output Power Detector * High Efficiency * Low Transistor Junction Temperature * Matched for a 50 System * Low Profile Miniature Surface Mount Package; RoHS Compliant APPLICATIONS * WiMAX and LTE Air Interfaces * Picocell, Femtocell, Home Nodes * Customer Premises Equipment (CPE) * Data Cards and Terminals M52 Package 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module PRODUCT DESCRIPTION The AWB7221 is a fully matched, Multi-Chip-Module (MCM) designed for picocell, femtocell, and customer premises equipment (CPE) applications. Its high linearity and efficiency meet the extremely demanding needs of small cell infrastructure architectures. Designed for WiMAX and LTE air interfaces operating in the 2.30 GHz to 2.70 GHz band, the AWB7221 delivers up to +28 dBm of WiMAX power with exceptionally low EVM. It operates from a convenient +4.2 V supply and provides more than 30 dB of gain. The device is manufactured using an advanced InGaP HBT MMIC technology offering state-of-theart reliability, temperature stability, and ruggedness. The self-contained 7 mm x 7 mm x 1.3 mm surface mount package incorporates RF matching networks optimized for output power, efficiency, and linearity in a 50 system. Vcc 1 RF Input Vcc 2 Step Attenuator Matching Network Bias Network Step Attenuator Matching Network Power Detector Bias Network Attenuator Control VENB Detector Output Figure 1: Block Diagram 12/2011 RF Output AWB7221 VENB 1 14 GND GND 2 13 GND GND 3 12 RFOUT VCC1 4 11 VCC2 RFIN 5 10 GND VATTN 6 9 GND VDET 7 8 GND GND Figure 2: Pinout (X-ray Top View) Table 1: Pin Description 2 PIN NAME DESCRIPTION 1 VENB Enable Voltage 2 GND Ground 3 GND Ground 4 VCC1 Supply Voltage 5 RFIN RF Input 6 VATTN Attenuator Control 7 VDET Detector Output 8 GND Ground 9 GND Ground 10 GND Ground 11 VCC2 Supply Voltage 12 RFOUT RF Output 13 GND Ground 14 GND Ground PRELIMINARY DATA SHEET - Rev 1.1 12/2011 AWB7221 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Supply Voltage (VCC) 0 +5 V Enable Voltage (VENB) 0 +3.2 V Attenuator Control Voltage (VATTN) - +3.7 V RF Input Power (PIN) - +3.0 dBm Junction Temperature (Tj) - +150 C -40 +150 C Storage Temperature (TSTG) Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 2300 - 2700 MHz Supply Voltage (VCC) +3.3 +4.2 +4.5 V Enable Voltage (VENB) +2.80 0 +2.85 - +3.1 +0.5 V PA "on" PA "shut down" +2.3 0 - +3.7 +0.7 V V Attenuator Enabled Attenuator Disabled RF Output Power (POUT) - +28 - dBm Case Temperature (TC) -40 - +85 C Attenuator Control Voltage (VATTN) Logic High Logic Low COMMENTS The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. 3 PRELIMINARY DATA SHEET - Rev 1.1 12/2011 AWB7221 Table 4: Electrical Specifications - 16 QAM PUSC Zone (TC = +25 C, VCC = +4.2 V, VENB = +2.85 V, 50 system) PARAMETER MIN TYP MAX UNIT Gain (2) - 31 - dB Attenuation - 23 - dB Spectrum Mask (1) (2) @ offset A @ offset B @ offset C @ offset D @ offset E @ offset F - - -13 -13 -19 -25 -25 -25 dBm Power-Added Efficiency (1) (2) - 17.5 - % Collector Current (ICC) (1) (2) - 850 - mA EVM (2) - 2.5 3.5 % Thermal Resistance (RJC) (3) - 13 - C/W Power Detector Output @ 28 dBm @ 18 dBm - 1.30 1.0 - V Quiescent Current (Icq) - 200 - mA VENB Current - 7 10 mA pin 1; VENB = +2.85 V VATTN Current - 160 - A pin 6; VATTN = +2.5 V Leakage Current - 50 - A VCC = +4.5 V, VENB = 0 V Harmonincs (2) 2fo, 4fo 3fo - -60 -55 -45 -45 dBc Input Return Loss - -15 - dB Spurious Ouput Level (2) (all spurious outputs) Load mismatch stress with no permanent degradation or failure - - -60 dBc 8:1 - - VSWR Notes: (1) Spectrum Mask and Efficiency measured at 2500 MHz. (2) POUT = +28 dBm. (3) Use only VCC2 (pin 11) current when calculating device junction temperature. 4 PRELIMINARY DATA SHEET - Rev 1.1 12/2011 COMMENTS VATTN = 2.5 V 10 MHz Channel Bandwidth WiMAX Forum Band Class 3A MMRT Junction to Case RL (Load Resistor) = 100 k In-band load VSWR < 5:1 Out-of-band load VSWR < 10:1 Applies over all voltage and temperature operating ranges VCC = +4.5 V, PIN = 0 dBm Applies over full operating temperature range AWB7221 APPLICATION INFORMATION To ensure proper performance, refer to all related Application Notes on the ANADIGICS web site: http://www.anadigics.com Shutdown Mode The power amplifier may be placed in a shutdown mode by applying logic low levels (see Operating Ranges table) to the VENB voltage. VENB C15 1000 pF 0.1F Vcc1 C1* C2* 100 F VENB C11 C3 10 F GND GND C4 0.1 F 1000 pF Vcc1 RFIN RFIN V ATTN V ATTN C5 VDET 0.1 F V DET R1 4.7 k C6 R2 100 k 0.1 F 1 14 GND 2 13 GND 3 12 RFOUT 4 5 AWB7221 11 10 6 9 7 8 RFOUT Vcc2 GND C8 C7 1000 pF GND 0.1 F GND * Optional Figure 3: Application Circuit Schematic 5 C9* PRELIMINARY DATA SHEET - Rev 1.1 12/2011 C10* 10 F C12* 100 F Vcc2 100 F AWB7221 Figure 4: PCB Footprint 6 PRELIMINARY DATA SHEET - Rev 1.1 12/2011 AWB7221 PACKAGE OUTLINE Figure 5: M52 Package Outline - 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module ANADIGICS logo Pin 1 Identifier Part Number Date Code YY= Year WW= Work Week Marking Code B7221R BBBB Figure 6: Branding Specification 7 PRELIMINARY DATA SHEET - Rev 1.1 12/2011 Lot Number Country Code AWB7221 COMPONENT PACKAGING PIN 1 Figure 7: Tape & Reel Packaging Table 5: Tape & Reel Dimensions 8 PACKAGE TYPE TAPE WIDTH 7 mm x 7 mm x 1.3 mm 16 mm POCKET PITCH 12 mm PRELIMINARY DATA SHEET - Rev 1.1 12/2011 REEL CAPACITY MAX REEL DIA 2500 13" AWB7221 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING AWB7221RM52P8 -40 oC to +85 oC RoHS-compliant 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module Tape and Reel, 2500 pieces per Reel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. warning ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 9 PRELIMINARY DATA SHEET - Rev 1.1 12/2011