DATA SHEET Chip On Board Mixer Quads Features High-volume automatic assembly For microwave MIC assembly and automated high-volume manufacturing Mechanically rugged design 100% DC tested Three barrier heights for customized mixer performance Available lead (Pb)-free, RoHS-compliant, and Green Description Skyworks ceramic Chip on Board (COB) mixer quads are designed for high-performance RF and microwave receiver applications. These devices utilize Skyworks advanced silicon beamless Schottky technology, combined with precision ceramic COB assembly techniques, to achieve a high degree of device reliability in commercial applications. NEW Skyworks Green products are lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant, conform to the EIA/EICTA/JEITA Joint Industry Guide (JIG) Level A guidelines, and are free from antimony trioxide and brominated flame retardants. Absolute Maximum Ratings Characteristic Maximum current (IMAX) Value 50 mA Power dissipation (PD) CW 75 mW/junction Storage temperature (TST) -65 C to +175 C Operating temperature (TOP) -65 C to +150 C Electrostatic Discharge (ESD) Human Body Model (HBM) Class 0 Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200271 Rev. D * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * April 19, 2007 1 DATA SHEET * CHIP-ON-BOARD MIXER QUADS Electrical Specifications at 25 C Part Number ) VF @ 1 mA1 ( (mV) VF @ 1 mA (mV) Barrier CJ @ 0 V (pF) ) CT @ 0 V2 ( (pF) RT @ 10 mA ) ( Min. Max. Max. Min. Max. Max. Max. Outline Drawing Ring Quad (to 6 GHz) DMF3926-101 Low 200 260 15 0.3 0.5 0.07 8 101 DME3927-101 Medium 300 400 15 0.3 0.5 0.07 8 101 DMJ3928-101 High 525 625 15 0.3 0.5 0.07 8 101 Crossover Ring Quad (to 6 GHz) DMF3926-100 Low 200 260 15 0.3 0.5 0.07 8 100 DME3927-100 Medium 300 400 15 0.3 0.5 0.07 8 100 DMJ3928-100 High 525 625 15 0.3 0.5 0.07 8 100 200 260 15 0.3 0.5 0.07 8 103 Back-to-Back Crossover Quad (to 6 GHz) DMF3945-103 Low DME3946-103 Medium 300 400 15 0.3 0.5 0.07 8 103 DMJ3947-103 High 525 625 15 0.3 0.5 0.07 8 103 Part Number Barrier VF @ 1 mA (mV) ) VF @ ( 1 mA1 (mV) CJ @ 0 V (pF) ) CT @ 0 V2 ( (pF) RT @ 10 mA ) ( VB @ 10 A (V) Min. Max. Max. Min. Max. Max. Max. Min. Outline Drawing Bridge Quad (to 6 GHz) DMF3929-102 Low 200 260 15 0.3 0.5 0.07 8 2 102 DME3930-102 Medium 300 400 15 0.3 0.5 0.07 8 3 102 DMJ3931-102 High 525 625 15 0.3 0.5 0.07 8 4 102 1. Forward voltage difference between package electrodes. 2. Capacitance difference between package electrodes. SPICE Model Parameters (Per Junction) Parameter Unit DMF3926 DMF3929 DMF3945 IS A 2.5E-07 RS N DME3927 DME3930 DME3946 DMJ3928 DMJ3931 DMJ3947 1.3E-09 9.0E-13 4 4 4 1.04 1.04 1.04 TT s 1E-11 1E-11 1E-11 CJ0 pF 0.42 0.39 0.39 0.32 0.37 0.42 0.69 0.69 0.69 M EG eV XTI 2 2 2 FC 0.5 0.5 0.5 BV V 2 3 4 IBV A 1E-05 1E-05 1E-05 VJ V 0.495 0.595 0.8 Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 April 19, 2007 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200271 Rev. D DATA SHEET * CHIP-ON-BOARD MIXER QUADS 100, 101, 102 103 0.005 (0.13 mm) 0.001 (0.02 mm) Typ. Ink Dot 0.010 (0.25 mm) Dia. Min. Color Per Internal Specification 0.100 (2.54 mm) +0.002 (0.05 mm) -0.004 (0.10 mm) Orientation Dot 0.140 (3.56 mm) 0.003 (0.08 mm) Dot Schematic 2 1 0.026 (0.66 mm) Mn. 0.020 (0.51 mm) 0.003 (0.08 mm) 3 6 4 5 0.130 (3.30 mm) 0.003 (0.08 mm) () Glass Dam 0.030 (0.76 mm) 0.003 (0.08 mm) SQ. Epoxy Encapsulation (Black) 0.040 (1.02 mm) Max. 0.020 (0.51 mm) 0.002 (0.05 mm) 0.120 (3.05 mm) +0.002 (0.05 mm) -0.004 (0.10 mm) 0.020 (0.51 mm) X 0.010 (0.25 mm) Orientation Mark Glass Not Shown For Clarity 0.025 (0.64 mm) 0.003 (0.08 mm) 0.050 (1.27 mm) Max. 0.020 (0.51 mm) 0.002 (0.05 mm) Ceramic Substrate Bottom side is free of metalization. The minimum specified area of the contact pads (0.017 x 0.022) shall be free of epoxy. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200271 Rev. D * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * April 19, 2007 3 DATA SHEET * CHIP-ON-BOARD MIXER QUADS Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 April 19, 2007 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200271 Rev. D