Vishay General Semiconductor
P6SMB Series
Document Number 88370
08-Sep-06
www.vishay.com
1
Surface Mount TRANSZORB® Transient Voltage Suppressors
FEATURES
Low profile package
Ideal for automated placement
Glass passivated chip junction
Available in Unidirectional and Bidirectional
600 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty cycle):
0.01 %
Excellent clamping capability
Very fast response time
Low incremental surge resistance
Meets MSL level 1, per J-STD-020C, LF max peak
of 260 °C
Solder Dip 260 °C, 40 seconds
Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching
and lighting on ICs, MOSFET, signal lines of
sensor units for consumer, computer, industrial and
telecommunication.
MECHANICAL DATA
Case: DO-214AA (SMB)
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
Polarity: For unidirectional types the band denotes
cathode end, no marking on bidirectional types
DO-214AA (SMB)
DEVICES FOR BIDIRECTION APPLICATIONS
For bidirectional devices use CA suffix (e.g. P6SMB10CA).
Electrical characteristics apply in both directions.
MAJOR RATINGS AND CHARACTERISTICS
V(BR) Unidirectional 6.8 V to 540 V
V(BR) Bidirectional 6.8 V to 220 V
PPPM 600 W
PD5.0 W
IFSM (Unidirectional only) 100 A
Tj max. 150 °C
Note:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL VALUE UNIT
Peak power dissipation with a 10/1000 µs waveform (1,2) (Fig. 1) PPPM Minimum 600 W
Peak pulse current with a 10/1000 µs waveform (1) I
PPM see next table A
Power dissipation on infinite heatsink TA = 50 °C , PD5.0 W
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I
FSM 100 A
Operating junction and storage temperature range TJ, TSTG - 65 to + 150 °C
www.vishay.com
2
Document Number 88370
08-Sep-06
Vishay General Semiconductor
P6SMB Series
Note:
(1) Pulse test: tp 50 ms
(2) Surge current waveform per Fig. 3 and derate per Fig. 2
(3) For bidirectional types with VWM of 10 volts and less, the ID limit is doubled
(4) All terms and symbols are consistent with ANSI/IEEE C62.35
(5) VF = 3 V at IF = 50 A (uni-directional only)
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
GENERAL
SEMICONDUCTOR
PART NUMBER
DEVICE
MARKING
CODE
BREAKDOWN
VOLTAGE
V
(BR)
AT I
T (1)
(V)
TEST
CURRENT
I
T
(mA)
STAND-OFF
VOLTAGE
V
WM
(V)
MAXIMUM
REVERSE
LEAKAGE
AT V
WM
I
D
(3)
(µA)
MAXIMUM
PEAK
PULSE
CURRENT
I
PPM
(2)
(A)
MAXIMUM
CLAMPING
VOLTAGE
AT I
PPM
V
C
(V)
MAXIMUM
TEMP.
COEFFICIENT
OF V(BR)
(%/°C)
UNI BI
MIN MAX
P6SMB6.8A 6V8A 6V8C 6.45 7.14 10 5.80 1000 57.1 10.5 0.057
P6SMB7.5A 7V5A 7V5C 7.13 7.88 10 6.40 500 53.1 11.3 0.061
P6SMB8.2A 8V2A 8V2C 7.79 8.61 10 7.02 200 49.6 12.1 0.065
P6SMB9.1A 9V1A 9V1C 8.65 9.55 1.0 7.78 50 44.8 13.4 0.068
P6SMB10A 10A 10C 9.50 10.5 1.0 8.55 10 41.4 14.5 0.073
P6SMB11A 11A 11C 10.5 11.6 1.0 9.40 5.0 38.5 15.6 0.075
P6SMB12A 12A 12C 11.4 12.6 1.0 10.2 5.0 35.9 16.7 0.078
P6SMB13A 13A 13C 12.4 13.7 1.0 11.1 5.0 33.0 18.2 0.081
P6SMB15A 15A 15C 14.3 15.8 1.0 12.8 1.0 28.3 21.2 0.084
P6SMB16A 16A 16C 15.2 16.8 1.0 13.6 1.0 26.7 22.5 0.086
P6SMB18A 18A 18C 17.1 18.9 1.0 15.3 1.0 23.8 25.2 0.088
P6SMB20A 20A 20C 19.0 21.0 1.0 17.1 1.0 21.7 27.7 0.090
P6SMB22A 22A 22C 20.9 23.1 1.0 18.8 1.0 19.6 30.6 0.092
P6SMB24A 24A 24C 22.8 25.2 1.0 20.5 1.0 18.1 33.2 0.094
P6SMB27A 27A 27C 25.7 28.4 1.0 23.1 1.0 16.0 37.5 0.096
P6SMB30A 30A 30C 28.5 31.5 1.0 25.6 1.0 14.5 41.4 0.097
P6SMB33A 33A 33C 31.4 34.7 1.0 28.2 1.0 13.1 45.7 0.098
P6SMB36A 36A 36C 34.2 37.8 1.0 30.8 1.0 12.0 49.9 0.099
P6SMB39A 39A 39C 37.1 41.0 1.0 33.3 1.0 11.1 53.9 0.100
P6SMB43A 43A 43C 40.9 45.2 1.0 36.8 1.0 10.1 59.3 0.101
P6SMB47A 47A 47C 44.7 49.4 1.0 40.2 1.0 9.3 64.8 0.101
P6SMB51A 51A 51C 48.5 53.6 1.0 43.6 1.0 8.6 70.1 0.102
P6SMB56A 56A 56C 53.2 58.8 1.0 47.8 1.0 7.8 77.0 0.103
P6SMB62A 62A 62C 58.9 65.1 1.0 53.0 1.0 7.1 85.0 0.104
P6SMB68A 68A 68C 64.6 71.4 1.0 58.1 1.0 6.5 92.0 0.104
P6SMB75A 75A 75C 71.3 78.8 1.0 64.1 1.0 5.8 103 0.105
P6SMB82A 82A 82C 77.9 86.1 1.0 70.1 1.0 5.3 113 0.105
P6SMB91A 91A 91C 86.5 95.5 1.0 77.8 1.0 4.8 125 0.106
P6SMB100A 100A 100C 95.0 105 1.0 85.5 1.0 4.4 137 0.106
P6SMB110A 110A 110C 105 116 1.0 94.0 1.0 3.9 152 0.107
P6SMB120A 120A 120C 114 126 1.0 102 1.0 3.6 165 0.107
P6SMB130A 130A 130C 124 137 1.0 111 1.0 3.4 179 0.107
P6SMB150A 150A 150C 143 158 1.0 128 1.0 2.9 207 0.108
P6SMB160A 160A 160C 152 168 1.0 136 1.0 2.7 219 0.108
P6SMB170A 170A 170C 162 179 1.0 145 1.0 2.6 234 0.108
P6SMB180A 180A 180C 171 189 1.0 154 1.0 2.4 246 0.108
P6SMB200A 200A 200C 190 210 1.0 171 1.0 2.2 274 0.108
P6SMB220A 220A 220C 209 231 1.0 185 1.0 1.8 328 0.108
P6SMB250A 250A - 237 263 1.0 214 1.0 1.74 344 0.110
P6SMB300A 300A - 285 315 1.0 256 1.0 1.45 414 0.110
P6SMB350A 350A - 333 368 1.0 300 1.0 1.24 482 0.110
P6SMB400A 400A - 380 420 1.0 342 1.0 1.10 548 0.110
P6SMB440A 440A - 418 462 1.0 376 1.0 1.00 602 0.110
P6SMB480A 480A - 456 504 1.0 408 1.0 0.91 658 0.110
P6SMB510A 510A - 485 535 1.0 434 1.0 0.86 698 0.110
P6SMB540A 540A - 513 567 1.0 459 1.0 0.81 740 0.110
Document Number 88370
08-Sep-06
www.vishay.com
3
P6SMB Series
Vishay General Semiconductor
Note:
(1) Mounted on minimum recommended pad layout
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL VALUE UNIT
Thermal resistance junction to ambient air (1) R
θJA 100 °C/W
Thermal resistance junction to leads RθJL 20 °C/W
ORDERING INFORMATION
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
P6SMB6.8A-E3/52 0.096 52 750 7" Diameter Plastic Tape & Reel
P6SMB6.8A-E3/5B 0.096 5B 3200 13" Diameter Plastic Tape & Reel
Figure 1. Peak Pulse Power Rating Curve
Figure 2. Pulse Power or Current versus Initial Junction
Temperature
0.2 x 0.2" (0.5 x 0.5 mm)
Copper Pad Areas
0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms
100
10
1
0.1
P
PPM
, Peak Pulse Power (kW)
td - Pulse Width (s)
0 255075100
100
75
50
25
0
125 150 175 200
TJ - Initial Temperature (°C)
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage, %
Figure 3. Pulse Waveform
Figure 4. Typical Junction Capacitance
0
50
100
1
5
0
td
0 1.0 2.0 3.0 4.0
tr = 10 µsec
Peak Value
I
PPM
Half Value -
I
PPM
I
PP
2
10/1000 µsec Waveform
as defined by R.E.A.
T
j
= 25 °C
Pulse Width (td)
is defined as the point
where the peak current
decays to 50 % of I
PPM
IPPM - Peak Pulse Current, % IRSM
t - Time (ms)
10
100
1000
101 100 200
Uni-Directional
Bi-Directional
6000
T
j
= 25 °C
f = 1.0 MHz
V
sig
= 50 mVp-p
Measured at
Zero Bias
V
R
, Measured at
Stand-off Voltage V
WM
C
J
, Junction Capacitance (pF)
V
WM
- Reverse Stand-off Voltage (V)
www.vishay.com
4
Document Number 88370
08-Sep-06
Vishay General Semiconductor
P6SMB Series
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Figure 5. Typical Transient Thermal Impedance
0.1
1.0
10
100
0.001 0.01 0.1 1 10 100 1000
tp - Pulse Duration (s)
Transient Thermal Impedance (°C/W)
Figure 6. Maximum Non-Repetitive Peak Forward Surge Current
10
200
100
1100
10
8.3 ms Single Half Sine-Wave
Unidirectional Only
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
0.160 (4.06)
0.180 (4.57)
0.006 (0.152)
0.012 (0.305)
0.030 (0.76)
0.060 (1.52)
0.205 (5.21)
0.220 (5.59)
0 (0)
0.008 (0.2)
0.130 (3.30)
0.155 (3.94)
0.084 (2.13)
0.096 (2.44)
0.077 (1.95)
0.086 (2.20)
Cathode Band
DO-214AA (SMB)
0.085 MAX.
(2.159 MAX.)
0.220 REF
0.086 MIN.
(2.18 MIN.)
0.060 MIN.
(1.52 MIN.)
Mounting Pad Layout
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.