TD62107P/F TOSHIBA Bipolar Digital Integrated Circuit Silicon Monolithic TD62107P,TD62107F 4ch High-current Darlington Sink Driver The TD62107P/F are high-voltage, high-current darlington drivers and enable inputs which can gate the outputs. All units feature integral clamp diodes for switching inductive loads. The TD62107P/F have a wide supply voltage range and all input are compatible with TTL and 5-V CMOS. Application include relay, hammer, lamp and stepping moter drivers. Please observe the thermal condition for using. TD62107P Features TD62107F * Output current (single output) 750 mA (max) * High sustaining voltage output: 45 V min (TD62107P) 35 V min (TD62107F) * Output clamp diodes * Enable inputs E1, E2 * Wide supply voltage range VCC = 4.75 to 7 V * Input compatible with TTL and 5-V CMOS * GND terminal = heat sink * Package type-P: DIP-16pin * Package type-F: HSOP-16pin Weight DIP16-P-300-2.54A: 1.11 g (typ.) HSOP16-P-300-1.00: 0.50 g (typ.) Pin Assignment (top view) TD62107P TD62107F VCC O1 O2 Heat sink & GND O3 O4 COM 16 15 14 13 12 11 10 9 16 1 E1 2 I1 3 I2 4 5 Heat sink & GND 6 I3 7 I4 8 E2 1 E1 NC Heat sink O2 & GND O3 O4 COM NC 15 14 13 12 11 10 9 2 I1 3 NC 4 5 I2 Heat sink I3 & GND 6 I4 7 E2 8 NC VCC O1 1 2006-02-14 TD62107P/F Schematics (each driver) Truth Table I1 O1 I2 O2 I3 O3 I4 O4 E1 E2 I1 to I4 O1 to O4 L L L or H Disable OFF L H L or H Disable OFF H L L or H Enable In H H L or H Disable OFF In = I1~I4 Common E1 E2 Input Equivalent Circuit Output Equivalent Circuit VCC Common Output Input Note: The input and output parasitic diodes cannot be used as clamp diodes. Absolute Maximum Ratings (Ta = 25C) Characteristics Supply voltage Output sustaining voltage Rating Unit VCC -0.5 to 17 V P F Output current Input voltage Clamp diode reverse voltage Symbol VCE (SUS) Clamp diode forword current 750 mA VIN V 45 VR IF F V -0.5 to VCC + 0.5 P Power dissipation -0.5 to 35 IOUT P F -0.5 to 45 V 35 500 mA 2.7 (Note 1) PD W 1.4 (Note 2) Operating temperature Topr -40 to 85 C Storage temperature Tstg -55 to 150 C Note 1: On glass epoxy PCB (50 x 50 x 1.6 mm Cu 50%) Note 2: On glass epoxy PCB (60 x 30 x 1.6 mm Cu 30%) 2 2006-02-14 TD62107P/F Recommended Operating Conditions (Ta = -40 to 85C) Characteristics Supply voltage Symbol Condition Min Typ. Max Unit VCC 4.75 15 V 0 45 VCE (SUS) 0 35 Tpw = 25 ms, Duty = 75%, 1 Circuit 0 500 Duty = 30% 0 400 Duty = 40% 300 0 VCC 45 35 P Output sustaining voltage F Output current IOUT P F Input voltage Tpw = 25 ms, 4 Circuit VIN VR IF 500 1.0 0.7 Min Typ. Max 2.0 VCC 0.8 VCE = 45 V, Ta = 75C 100 VCE = 35 V, Ta = 85C 100 P Clamp diode reverse voltage F Clamp diode forward current P Power dissipation PD F Note1: V Ta = 85C (Note 1) mA V V mA W On Glass Epoxy PCB (60 x 30 x 1.6 mm Cu 30%) Electrical Characteristics (Ta = 25C) Characteristics Input voltage Output current Output voltage Symbol High level VIH Low level VIL High level Test Circuit Test Condition 1 P Unit V A IOH 2 Low level VOL 3 IOUT = 50 mA 1.3 V High level IIH 4 VIN = 13 V 100 A Low level IIL 5 VIN = 0.4 V -0.3 mA VR = 45 V 100 VR = 35 V 100 F Input current P Clamp diode reverse current IR 6 VF 7 IF = 500 mA 2.0 ICCH 4 VCC = 13 V, VIN = 0 V Output open 13 ICCL 5 VCC = 13 V, VIN = 5 V Output open 17 VCC = 5 V, RL = 90 CL = 15 pF, VOUT = 45 V 5 F VCC = 5 V, RL = 70 CL = 15 pF, VOUT = 35 V 5 P VCC = 5 V, RL = 90 CL = 15 pF, VOUT = 45 V 5 VCC = 5 V, RL = 70 CL = 15 pF, VOUT = 35 V 5 F Clamp diode forward voltage Output high Supply current Output low ICC P tON Turn-on delay Turn-off delay tOFF F 8 8 3 A V mA s s 2006-02-14 TD62107P/F Test Circuit 1. VIH, VIL 2. IOH VCC Open 3. VOL VCC VCC Open IOH IOUT VIH, VIL VCC IIH IOUT VCE VCE 4. IIH, ICCL VIN (ON) 5. IIL, ICCL Open VCC ICCH IIL IR Open VIN VOL 6. IR VCC Open ICCL Open Open VR Open VIN Open 7. VF 8. tON, tOFF VCC Input VF Open IF Open V VOUT RL Pulse generator Output (Note 1) CL = 15 pF (Note 3) (Note 2) Open Input Condition tf tr 90% 50% Input 10% VIH = 3 V 90% 50% 50 s 10% 0 tOFF tON VOH Output 50% 50% VOL Note 1: Pulse width 50 s, duty cycle 10% Output Impedance 50 , tr 5ns, tf 10 ns Note 2: VIH = 3 V, E1 = VIH, E2 = GND, VCC = 5 V Note 3: CL includes probe and jig capacitance Precautions for Using This IC does not include built-in protection circuits for excess current or overvoltage. If this IC is subjected to excess current or overvoltage, it may be destroyed. Hence, the utmost care must be taken when systems which incorporate this IC are designed. Utmost care is necessary in the design of the output line, VCC, COMMON and GND line since IC may be destroyed due to short-circuit between outputs, air contamination fault, or fault by improper grounding. 4 2006-02-14 TD62107P/F VCE (sat) - IOUT VOUT - VIN 8.0 50 (A) IOUT = 500 mA Output current Output current IOUT 6.0 IOUT (A) VCC = 5 to 17 V 0.4 Ta = 75C 25 -30 0.2 0 0 0.4 0.8 1.2 Output saturation voltage 40 25 20 Ta = 75C 10 0 0 1.6 -30 30 2.0 1.0 VCE (sat) (V) 3.0 Input voltage IOUT - Duty cycle 4.0 5.0 VIN (V) IOUT - Duty cycle 0.8 0.8 Absolute maximum ratings 1 Absolute maximum ratings 1, 2 0.6 IOUT 4 Circuit 3 Output current Output current IOUT (A) (A) 2 Recommended limit 0.4 3 0.6 4 Circuit Recommended limit 0.4 Ta = 75C 0.2 30 50 70 Duty cycle Ta = 25C 0.2 30 90 50 (%) 70 Duty cycle PD - Ta 90 (%) PD - Ta 4 4.0 (1) Type-F on PCB TD62107P PD (W) (2) Type-F free air 3 Power dissipation Power dissipation PD (W) 60 x 30 x 1.6 mm Cu 30% 2 (1) 1 0 0 (2) 25 50 75 Ambient temperature 100 Ta 125 3.0 2.0 1.0 0 0 150 (C) 25 50 75 Ambient temperature 5 100 Ta 125 150 (C) 2006-02-14 TD62107P/F Package Dimensions Weight: 1.11 g (typ.) 6 2006-02-14 TD62107P/F Package Dimensions Weight: 0.50 g (typ.) 7 2006-02-14 TD62107P/F 8 2006-02-14