55
Low Cost Axial Vactrols VTL5C9, 5C10
PACKAGE DIMENSIONS INCH (MM)
PLASTIC POTT ING CON TO UR
NOT CONT ROLLED
DESCRIPTION
VTL5C9 has a 112 db dynamic range, fast response time, high dark resistance, but with a more shallow slope and lower “on”
resistance at l ow (1 mA) dr ive currents than the VTL 5C1. VTL510 offe rs a low “on” resistance at low drive currents, a fast response
tim e, and has a smal l er tem pera t ure coe f fic i e nt t ha n t he VTL5C9.
ABSOLUTE MAXIMU M RATING S @ 25°C
Maximum Temperatures
Storage and Operating: –4 0°C to 75°C
Cell Power: 175 mW
Der ate above 30°C: 3.9 m W/°C
LED Current: 40 mA
Der ate above 30°C: 0.9 m A/ °C
LED Rev erse Breakdown Voltage: 3.0 V
1
LED Forward Voltage Drop @ 20 mA: 2.8V (2.2V Typ.)
Min . Is olation Voltage @ 70% Rel . H umidity: 2500 VR M S
Out put Cell Capaci t ance: 5.0 pF
Cell Vol tage: 10 0V (VTL5C9),
50 V ( VTL5C10)
Input - Output Cou pli ng Capacit ance: 0.5 pF
ELECTRO-OPTICAL CHARCTERISTICS @ 25°C
Refer to Specification Notes, page 41.
Part
Number Material
Type
ON Resis tance OFF
Resistance
@ 10 sec. (Min.)
Slope
(Typ.) Dynamic Range
(Typ.) Response Time
Input c u rren t Dark
Adapte d
(Typ.)
Turn-on to
63% Final R ON
(Typ.)
Turn-o f f (Decay)
to 100 kΩ
(Max.)
VTL5C9 1 2 mA 630 Ω50 MΩ7.3 112 db 4.0 ms 50 ms
VTL5C10 4 2 mA 400 Ω400 KΩ3.8 75 db 1.0 ms 1.5 sec
23
@ 0.5 m A
R@ 5 mA
------------------------ RDARK
R@ 20 mA
------------------------
4
PerkinElmer Optoelectronics, 10900 Page Ave., St. Louis, MO 63132 USA Phone: 314-423-4900 Fax: 314-423-3956 Web: www.perkinelmer.com/opto
56
Typical Performance Curves
Output Resistance vs. Input Current
VTL5C9
Output Resistance vs. Input Current
VTL5C10
Input Characteristics
Response Time
VTL5C9
Response Time
VTL5C10
Notes:
1. At 1. 0 mA and below, units may hav e substanti ally higher
resi stance than sho wn in the typica l curv es. Consul t factory i f
closely controll ed charact eristics are requi r ed at l ow input
currents.
2. Out put resistance vs input curr ent t r ansfer curves are gi ven for
the following light adapt condition s:
(1) 25 °C — 24 hour s @ no in put
(2) 25 °C — 24 hour s @ 40 mA in put
(3) +50°C — 24 hour s @ 40 mA input
(4) –2 0°C — 24 hour s @ 40 mA input
3. Response time characteristi cs ar e based upon test following
adapt condition (2) above.
Perk inElmer Optoelectronics, 1090 0 Page Ave., St. Louis, MO 63132 USA Phone: 314-423-4900 Fax: 314-423-3956 Web: www.perkinelmer.com/opto
