Straddle MountIn-Line Mount
Right-angle mounting orientation Provides super low prole solder
option for wires exiting a PCB
(much lower than a “solder & bend”
operation that many customers use)
Multiple terminal/wire size ranges
(14 to 28 AWG)
Enable signal-to-power current
capability while optimizing PCB space
Twin solder pins Provide unmatched stability
for solder processing and allow
redundant current paths
Solder pins positioned between the
insulation and conductor crimps
Offer superior wire strain relief
and resist terminal and solder joint
breakage if wire is pulled
Single terminal, one-piece crimp
design
One of the lowest-cost, most
reliable, direct solder interconnects
in the market
Lowered prole from 3.50 to
1.95mm
Allows minimum “z” height soldering
prole for tight packaging constraints
Features and Benets
Ideal for tight packaging constraints, low-prole
SolderRight Direct-Solder Terminals enable right-angle
connections to a PCB at a low applied cost
SolderRight Direct Solder In-Line
Mount Terminal
SolderRight
Direct-Solder
Terminals
172677 22 to 28 AWG
In-Line Mount
172249 14 to 20 AWG
In-Line Mount
171892 16 to 18 AWG
Straddle Mount