Tools Banjo Modular Adapters The Banjo Modular Adapters are designed to permit testing on working lines. They allow circuit access without disrupting service; sturdy copper contacts are angled to prevent alligator clips from falling off during testing. There are also small holes in each contact for the use circuit access of test probes. All circuits are clearly marked on sides and bottom of the Banjo adapters. The Banjo adapter is available in four, six, or without disrupting service eight wire configuration for voice and data applications. They have a heavy duty, molded- Part Numbers: in clip for attaching to shirt pocket or tool 4 Wire Standard Modular Adapter . . . . . .P/N 10113-000 pouch. 4 Wire Banjo Adapter . . . . . . . . . . . . . . . .P/N 10210-100 6 Wire Banjo Adapter . . . . . . . . . . . . . . . .P/N 10220-100 8 Wire Banjo Adapter . . . . . . . . . . . . . . . .P/N 10230-100 Features: * Two models available: the Standard Modular Adapter and the Banjo Modular Adapter * Standard Modular Adapter is economical, convenient, small, and has a handy pocket clip. * Banjo Modular Adapters available with 4, 6, and 8 wire (RJ11, RJ45) * Banjo Modular Adapters available with numbered contacts and no interruption of service design * Durable, high impact plastic design; outside plant resistant * Banjo Modular Adapter allows for replaceable line cords Communications Products Division 809 Calle Plano, Camarillo, CA 93012-8519 USA www.harris.com 1-800-437-2266 or 1-805-987-9511 PB No. 2004 5/99 (c) 1999 HARRIS CORPORATION next level solutions Replacement Cords: For use with 4 and 6 wire adapters . . . . .P/N 10200-000 For use with 8 wire adapters . . . . . . . . . .P/N 10300-000