(26/36) TLA-6T719 ISO8802.3(IEEE802.3) 10/100BASE-TX FEATURES * Product conforming to RoHS directive. * Pulse transformer, common mode choke, resistor and high withstanding voltage capacitor are integrated into RJ-45 modular jack. * Excellent common mode noise suppression. * Inductance is 350H or greater (f=100kHz, DC bias=8mA). * Using the high-quality and wide-band ferrite cores for LAN. GENERAL SPECIFICATIONS SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 2.3typ. Withstanding voltage 21.45typ. RX 3.2typ. 3.1typ. 3.63typ. PCB * 75 0.001F Dimensions in mm CABLE 75 13.85typ. TX 75 16.0typ. 2 2 1 0 to +70C -40 to +85C Erms:1500V[60s] Operating Storage Temperature ranges 2.3typ. 2.3typ. Pulse transformer Common-mode choke Port 75 N.C. pin: RECOMMENDED PC BOARD PATTERN[TOP VIEW] 8-o0.9 10.92typ. 8.89typ. * 3.05typ. 2-o1.6 1.27typ. 2-o3.25 21.45typ. 2.54typ. 8.89typ. 11.43typ. 15.75typ. 16.0typ. Dimensions in mm ELECTRICAL CHARACTERISTICS Part No. Turns ratio : : TLA-6T719 1CT:1 1CT:1 Inductance (H)min. [DC bias 8mA, 100kHz] - - 350 350 Insertion loss (dB)max. [0.1 to 100MHz] - - 1 1 * Ta=25C * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * All specifications are subject to change without notice. 004-01 / 20061110 / edlan_tla.fm (27/36) PACKAGING STYLES Tray : 45pieces/tray RECOMMENDED SOLDERING CONDITION FLOW SOLDERING 51s 255C max. Natural cooling 130C 90C Preheating: 30 to 45s Time(s) Preheating: 90 to 130C for 30 to 45 seconds. Soldering: 255C max. 51 seconds * Perform flow soldering from the underside of the board. * The surface of plastic protrusions inserted into the board may melt, but this causes no problems with regard to electrical properties or mounting. * The cutted end of terminal has no plating(out of subject of solder ability). RECOMMENDED CONDITION FOR LONG TERM STORE When it stores for a long term, please avoid place of high temperature and high humidity. Recommend that it uses after the delivery within 1year. Temperature range: +5 to +30C Humidity: 60(%)RH max. * All specifications are subject to change without notice. 004-01 / 20061110 / edlan_tla.fm