(26/36)
004-01 / 20061110 / edlan_tla.fm
• All specifications are subject to change without notice.
TLA-6T719 ISO8802.3(IEEE802.3) 10/100BASE-TX
FEATURES
• Product conforming to RoHS directive.
• Pulse transformer, common mode choke, resistor and high with-
standing voltage capacitor are integrated into RJ-45 modular
jack.
• Excellent common mode noise suppression.
• Inductance is 350µH or greater (f=100kHz, DC bias=8mA).
• Using the high-quality and wide-band ferrite cores for LAN.
GENERAL SPECIFICATIONS
SHAPES AND DIMENSIONS CIRCUIT DIAGRAM
RECOMMENDED PC BOARD PATTERN[TOP VIEW]
ELECTRICAL CHARACTERISTICS
• Ta=25°C
Pulse transformer 2
Common-mode choke 2
Port 1
Temperature ranges Operating 0 to +70°C
Storage –40 to +85°C
Withstanding voltage Erms:1500V[60s]
Part No.
Turns ratio
:
:
Inductance
(µH)min.
[DC bias 8mA, 100kHz]
-
-
Insertion loss
(dB)max.
[0.1 to 100MHz]
-
-
TLA-6T719 1CT:1 350 1
1CT:1 350 1
2.3typ. 2.3typ.16.0typ. 21.45typ.
3.63typ. 13.85typ.
3.1typ.
3.2typ.
2.3typ.
„‥
₷₾
Dimensions in mm
₷
₸
₹
₺
₻
₼
₽
₾
„
‟
†
‡
•
‣
․
‥
PCB CABLE
TX
RX
75Ω
75Ω
75Ω
75Ω
0.001µF
N.C. pin: ․
16.0typ.
11.43typ.
8.89typ.
1.27typ.
15.75typ.
21.45typ.
10.92typ. 8.89typ.
3.05typ.
Dimensions in mm
2.54typ.
2-ø1.6
8-ø0.9
2-ø3.25
„† • ․
‟‡ ‣‥
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(27/36)
004-01 / 20061110 / edlan_tla.fm
• All specifications are subject to change without notice.
PACKAGING STYLES
Tray : 45pieces/tray
RECOMMENDED SOLDERING CONDITION
FLOW SOLDERING
Preheating: 90 to 130°C for 30 to 45 seconds.
Soldering: 255°C max. 5±1 seconds
• Perform flow soldering from the underside of the board.
• The surface of plastic protrusions inserted into the board may
melt, but this causes no problems with regard to electrical
properties or mounting.
• The cutted end of terminal has no plating(out of subject of solder
ability).
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
Temperature range: +5 to +30°C
Humidity: 60(%)RH max.
255˚C max.
130˚C
90˚C
Preheating: 30 to 45s
Time(s)
Natural
cooling
5±1s
