TLCR5200, TLCY5200 Vishay Semiconductors Ultrabright LED, O 5 mm Untinted Non-Diffused FEATURES * * * * Untinted non-diffused lens Utilizing ultrabright AllnGaP (AS) High luminous intensity High operating tempreature: Tj (chip junction temperature) up to 125 C for AllnGaP devices * Luminous intensity and color categorized for each packing unit * ESD-withstand voltage: up to 2 kV according to JESD22-A114-B * Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC 19223 DESCRIPTION The TLC.52.. series are a clear, non diffused 5 mm LED for high end applications where supreme luminous intensity required. These lamps with clear untinted plastic case utilize the highly developed ultrabright AlInGaP (AS). The lens and the viewing angle is optimized to achieve best performance of light output and visibility. PRODUCT GROUP AND PACKAGE DATA * Product group: LED * Package: 5 mm * Product series: power * Angle of half intensity: 15 APPLICATIONS * Interior and exterior lighting * Outdoor LED panels * Instrumentation and front panel indicators * Central high mounted stop lights (CHMSL) for motor vehicles * Replaces incandescent lamps * Traffic signals * Light guide design PARTS TABLE PART COLOR, LUMINOUS INTENSITY TECHNOLOGY TLCR5200 Red, IV > 1350 mcd AllnGaP on GaAs TLCY5200 Yellow, IV > 1350 mcd AllnGaP on GaAs ABSOLUTE MAXIMUM RATINGS 1) TLCR5200, TLCY5200 PARAMETER Reverse voltage TEST CONDITION SYMBOL VALUE UNIT VR 5 V Tamb 85 C IF 50 mA tp 10 s IFSM 1 A PV 135 mW 2) DC Forward current Surge forward current Power dissipation Tj 125 C Operating temperature range Tamb - 40 to + 100 C Storage temperature range Tstg - 40 to + 100 C Tsd 260 C RthJA 300 K/W Junction temperature Soldering temperature t 5 s, 2 mm from body Thermal resistance junction/ ambient Note: 1) T amb = 25 C unless otherwise specified 2) Driving the LED in reverse direction is suitable for a short term application Document Number 81354 Rev. 1.3, 07-Oct-09 For technical support, please contact: LED@vishay.com www.vishay.com 1 TLCR5200, TLCY5200 Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS 1) TLCR5200, RED TEST CONDITION PART SYMBOL MIN. TYP. Luminous intensity 2) PARAMETER IF = 50 mA TLCR5200 IV 1350 4000 Dominant wavelength IF = 50 mA d 611 616 Peak wavelength IF = 50 mA p 622 nm Spectral bandwidth at 50 % Irel max. IF = 50 mA 18 nm Angle of half intensity IF = 50 mA 15 Forward voltage IF = 50 mA VF 2.1 MAX. UNIT mcd 622 nm deg 2.7 V Reverse voltage IR = 10 A VR Temperature coefficient of VF IF = 50 mA TCVF - 3.5 mV/K Temperature coefficient of d IF = 50 mA TCd 0.05 nm/K 5 V Note: 1) T amb = 25 C unless otherwise specified 2) In one packing unit IVmax./IVmin. 2.0 OPTICAL AND ELECTRICAL CHARACTERISTICS 1) TLCY5200, YELLOW PARAMETER Luminous TEST CONDITION intensity 2) IF = 50 mA PART SYMBOL MIN. TYP. TLCY5200 IV 1350 4000 585 590 MAX. UNIT mcd Dominant wavelength IF = 50 mA d Peak wavelength IF = 50 mA p 593 nm Spectral bandwidth at 50 % Irel max. IF = 50 mA 17 nm Angle of half intensity IF = 50 mA 15 Forward voltage IF = 50 mA VF 2.1 Reverse voltage IR = 10 A VR Temperature coefficient of VF IF = 50 mA TCVF - 3.5 mV/K Temperature coefficient of d IF = 50 mA TCd 0.1 nm/K 597 nm deg 2.7 5 V V Note: 1) T amb = 25 C unless otherwise specified 2) In one packing unit I Vmax./IVmin. 2.0 LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD MIN. MAX. FF GG HH II KK LL MM NN PP QQ RR SS TT UU 1350 1800 2400 3200 4300 5750 7500 10 000 13 500 18 000 24 000 32 000 43 000 57 500 2700 3600 4800 6400 8600 11 500 15 000 20 000 27 000 36 000 48 000 64 000 86 000 115 000 Note: Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. www.vishay.com 2 The type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups on each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one bag. In order to ensure availability, single wavelength groups will not be orderable. COLOR CLASSIFICATION DOM. WAVELENGTH (nm) GROUP 0 1 2 3 YELLOW RED MIN. MAX. MIN. MAX. 585 587 589 592 588 591 594 597 611 614 618 622 Note: Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm. For technical support, please contact: LED@vishay.com Document Number 81354 Rev. 1.3, 07-Oct-09 TLCR5200, TLCY5200 Vishay Semiconductors TYPICAL CHARACTERISTICS Tamb = 25 C, unless otherwise specified 100 50 yellow red 40 30 20 10 60 40 20 0 0 20 40 60 80 100 0 1.5 120 Tamb - Ambient Temperature (C) 16710 15974 Figure 1. Forward Current vs. Ambient Temperature IV rel - Relative Luminous Intensity Irel - Relative Luminous Intensity 1.0 0.8 0.6 0.4 0.2 red 1 0.1 0.01 590 610 630 650 1 670 10 IF - Forward Current (mA) 15978 - Wavelength (nm) 16007 Figure 2. Relative Intensity vs. Wavelength 100 Figure 5. Relative Luminous Flux vs. Forward Current 10 1.2 yellow IV rel - Relative Luminous Intensity IV rel - Relative Luminous Intensity 2.5 10 red yellow 1.0 0.8 0.6 0.4 0.2 0.0 540 1.7 1.9 2.1 2.3 VF - Forward Voltage (V) Figure 4. Forward Current vs. Forward Voltage 1.2 0.0 570 red yellow 80 IF - Forward Current (mA) IF - Forward Current (mA) 60 1 0.1 0.01 560 16008 580 600 620 - Wavelength (nm) Figure 3. Relative Intensity vs. Wavelength Document Number 81354 Rev. 1.3, 07-Oct-09 1 640 15979 10 IF - Forward Current (mA) 100 Figure 6. Relative Luminous Flux vs. Forward Current For technical support, please contact: LED@vishay.com www.vishay.com 3 TLCR5200, TLCY5200 Vishay Semiconductors PACKAGE DIMENSIONS in millimeters R 2.49 (sphere) < 0.7 0.15 7.7 8.7 0.3 35.1 0.55 12.1 0.3 O 5.8 0.15 C (4.3) A Area not plane 1.1 0.25 1 min. O 5 0.15 technical drawings according to DIN specifications 0.5 0.15 0.5 +- 0.05 + 0.15 - 0.05 2.54 nom. Drawing-No.: 6.544-5258.07-4 Issue: 4; 19.05.09 14339 www.vishay.com 4 For technical support, please contact: LED@vishay.com Document Number 81354 Rev. 1.3, 07-Oct-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1