EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Full Color Chip LED (Chip LED with Right Angle Lens) 12-23A/R6GHBHC-A01/2D Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Full-color type. Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 12-23A SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Emitted Color Type Material R6 AlGaInP Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Everlight Electronics Co., Ltd. Device No:DSE-123- http://www.everlight.com Prepared date: 9-Aug-2007 Resin Color Water Clear Rev 1 Page: 1 of 12 Prepared by: Pengchunya EVERLIGHT ELECTRONICS CO.,LTD. 12-23A/R6GHBHC-A01/2D Package Outline Dimensions Note: The tolerances unless mentioned is 0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No:DSE-123- http://www.everlight.com Prepared date: 9-Aug-2007 Rev 1 Page: 2 of 12 Prepared by: Pengchunya EVERLIGHT ELECTRONICS CO.,LTD. 12-23A/R6GHBHC-A01/2D Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V R6:25 Forward Current IF GH:25 mA BH:25 Peak Forward Current (Duty 1/10 @1KHz) R6:60 IFP GH:100 mA BH:100 R6:60 Power Dissipation Pd GH:110 mW BH:110 R6:2000 Electrostatic Discharge (HBM) ESD GH:150 V BH:150 Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol Everlight Electronics Co., Ltd. Device No:DSE-123- Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. http://www.everlight.com Prepared date: 9-Aug-2007 Rev 1 Page: 3 of 12 Prepared by: Pengchunya EVERLIGHT ELECTRONICS CO.,LTD. 12-23A/R6GHBHC-A01/2D Electro-Optical Characteristics (Ta=25) Parameter Symbol R6 Luminous Intensity Iv GH BH Viewing Angle 21/2 Min. Typ. Max. Unit Condition 57 112 45 90 180 72 ----- mcd IF=20mA ----- 120 ----- deg IF=20mA ----- nm IF=20mA ----- nm IF=20mA ----- nm IF=20mA V IF=20mA A VR=5V BH 632 518 468 624 525 470 R6 20 R6 Peak Wavelength p GH ----- BH R6 Dominant Wavelength Spectrum Radiation Bandwidth d GH GH ----- ----- 35 BH R6 Forward Voltage VF GH BH 35 1.7 2.7 2.7 2.0 3.3 3.3 ----- ----- R6 Reverse Current IR GH BH Everlight Electronics Co., Ltd. Device No:DSE-123- http://www.everlight.com Prepared date: 9-Aug-2007 2.4 3.7 3.7 10 50 50 Rev 1 Page: 4 of 12 Prepared by: Pengchunya EVERLIGHT ELECTRONICS CO.,LTD. 12-23A/R6GHBHC-A01/2D Typical Electro-Optical Characteristics Curves R6 Forward Current vs. Forward Voltage Ta=25C 40 F 75 30 50 25 0 500 550 600 650 Wavelength (nm) 25 20 10 0 2.6 700 Relative luminous intensity (%) Relative luminous intensity (%) Ambient Temperature 1000 100 10 1 -60 -40 -20 3.0 3.4 1000 4.2 4.5 Luminous Intensity vs Forward Current Ta=25C f=1KHz Duty=1/10 100 10 1 10 0 20 40 60 80 100 Ambient Temperature Ta (C) 10 10 Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve 0 50 IF(mA) 3.8 Forward Voltage VF (V) Luminous Intensity vs. Forward Current Ta=25C 50 I (mA) 100 Forward Current Relative luminous intensity (%) Spectrum Distribution Ta=25C 10 20 30 40 40 30 25 1.0 20 0.9 50 0.8 60 10 70 0.7 0 0 20 40 60 85 100 Ambient Temperature Ta (C) Everlight Electronics Co., Ltd. Device No:DSE-123- http://www.everlight.com Prepared date: 9-Aug-2007 80 90 0.5 0.3 0.1 Rev 1 0.2 0.4 0.6 Page: 5 of 12 Prepared by: Pengchunya EVERLIGHT ELECTRONICS CO.,LTD. 12-23A/R6GHBHC-A01/2D Typical Electro-Optical Characteristics Curves GH Ta=25C Forward Current I (mA) Relative luminous intensity ( % ) Ta=25C Wavelength p(nm) Forward Voltage VF (V) Relative luminous intensity ( %) Relative luminous intensity ( % ) Ta=25C Ambient Temperature Ta(C ) Forward Current I (mA) Forward Current I (mA) Ta=25C Ambient Temperature Ta (C ) Everlight Electronics Co., Ltd. Device No:DSE-123- http://www.everlight.com Prepared date: 9-Aug-2007 Rev 1 Page: 6 of 12 Prepared by: Pengchunya EVERLIGHT ELECTRONICS CO.,LTD. 12-23A/R6GHBHC-A01/2D Typical Electro-Optical Characteristics Curves BH Ta=25C Forward Current I (mA) Relative luminous intensity ( % ) Ta=25C Wavelength p(nm) Forward Voltage VF (V) Relative luminous intensity ( %) Relative luminous intensity ( % ) Ta=25C 1000 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta(C ) Forward Current I (mA) Forward Current I (mA) Ta=25C Ambient Temperature Ta (C ) Everlight Electronics Co., Ltd. Device No:DSE-123- http://www.everlight.com Prepared date: 9-Aug-2007 Rev 1 Page: 7 of 12 Prepared by: Pengchunya EVERLIGHT ELECTRONICS CO.,LTD. 12-23A/R6GHBHC-A01/2D Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No:DSE-123- http://www.everlight.com Prepared date: 9-Aug-2007 Rev 1 Page: 8 of 12 Prepared by: Pengchunya EVERLIGHT ELECTRONICS CO.,LTD. 12-23A/R6GHBHC-A01/2D Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No:DSE-123- http://www.everlight.com Prepared date: 9-Aug-2007 Desiccant Rev 1 Label Page: 9 of 12 Prepared by: Pengchunya EVERLIGHT ELECTRONICS CO.,LTD. 12-23A/R6GHBHC-A01/2D Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No:DSE-123- http://www.everlight.com Prepared date: 9-Aug-2007 Rev 1 Page: 10 of 12 Prepared by: Pengchunya EVERLIGHT ELECTRONICS CO.,LTD. 12-23A/R6GHBHC-A01/2D Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No:DSE-123- http://www.everlight.com Prepared date: 9-Aug-2007 Rev 1 Page: 11 of 12 Prepared by: Pengchunya EVERLIGHT ELECTRONICS CO.,LTD. 12-23A/R6GHBHC-A01/2D 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No:DSE-123- Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Prepared date: 9-Aug-2007 Rev 1 Page: 12 of 12 Prepared by: Pengchunya