SPEC NO: DSAD1549 REV NO: V.10 DATE: JUL/09/2007 PAGE: 1 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: .W.J.ZHU ERP: 1205000006
PHOTOCOUPLER
Part Number: KB817
GENERAL PURPOSE
HIGH ISOLATION VOLTAGE
SINGLE TRANSISTOR TYPE
PHOTOCOUPLER SERIES
FEATURES
1.High isolation voltage between input and output (Viso=5000 Vrms).
2.Compact dual-in-line package
KB817:1-channel type
3.Recognized by UL and CUL, file NO.E225308.
4.Approved by VDE 0884 Teil2(NO:4000636 4)
(Creepage distance between inp ut and output:7mm or more).
5.RoHS compliant.
DESCRIPTION
1.The KB817 (1-channel) is optically coupled isolators containing a GaAS light emitting diode and
an NPN silicon phototransisto r.
2.The lead pitch is 2.54mm.
3.Solid insulation thickness between emitting diode and output phototransistor:>=0.6mm.
APPLICATIONS
1.Computer terminals.
2.Registers,copiers,automatic vending machines.
3.System appliances, measuring instruments.
4.Programmable logic controller.
5.Signal transmission between circuits of different potentials and impedances.
SPEC NO: DSAD1549 REV NO: V.10 DATE: JUL/09/2007 PAGE: 2 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: .W.J.ZHU ERP: 1205000006
PHOTOCOUPLER
Part Number: KB817
*PACKAGE DIMENSIONS (UNIT:mm)
DIP Type
TOLERANCE : ±0.5[±0.02] UNLESS OTHE RWISE NOTED.
*Absolute Maximum Ratings (Ta=25°C)
Parameter Symbol Rating Unit
Input
F o r ward c urrent I
F
50 mA
Reverse voltage V
R
6V
Power di ssi pation P 70 mW
Output
Colle c t o r- e m itter voltage V
CEO
35 V
Emitter-collector voltage V
ECO
6V
Co llec tor c urrent I
C
50 mA
Co llec tor p owe r dissipation P
C
150 mW
Total power dissipation Ptot 200 mW
*1
Isolation voltage Vi so 5000 Vrms
Operati ng temperature Topr -30~+100 °C
Storage temperature Tstg -55~+125 °C
*2
Solderi ng temperature Tsol 260 °C
*1 40 to 60% RH,AC for 1 minute.
*2 For 10 seconds.
KB817 Top View Internal connection diagram
SPEC NO: DSAD1549 REV NO: V.10 DATE: JUL/09/2007 PAGE: 3 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: .W.J.ZHU ERP: 1205000006
PHOTOCOUPLER
Part Number: KB817
*Electro-optical Characteristics
Parameter Symbol Conditions Min. Typ. Max. Unit
Input
Forward voltage V
F
I
F
=20mA ___ 1.2 1.4 V
Peak forward voltage V
FM
I
FM
=0.5A ___ ___ 3.0 V
Revers e c urrent I
R
V
R
=4V ___ ___ 10 μA
Output Collector dark current I
CEO
V
CE
=20V,I
F
=0mA ___ ___ 10
-7
nA
Transfer
charact-
eristics
*1
Current transfer ratio CTR I
F
=5mA,V
CE
=5V 50 ___ 600 %
Co lle c to r -e mitter s a turation vo lta g e V
CE(
sat
)I
F
=20mA , I
C
=1mA ___ 0.1 0.2 V
Cut-off frequency f
c
V
CE
=5V, I
C
=2mA
R
L
=100Ω,-3dB ___ 80 ___ KHz
Response time Rise time
t
r
V
CE
=2V, I
C
=2mA
R
L
=100Ω
___ 4 18 μs
Fall time t
f
___ 3 18 μs
X 100%
Classification table of current transfer ratio is shown below.
CTR= F
I
Ic
Model No . Ran k mark CT R (%)
KB 817L L 50 to 100
KB 817A A 80 to 160
KB 817B B 130 to 260
KB 817C C 200 to 400
KB 817D D 300 to 600
KB 817A B A o r B 80 to 260
KB817BC B or C 130 to 400
KB 817C D C or D 200 to 600
KB817AC A,B or C 80 to 400
KB817BD B,C or D 130 to 600
KB817AD A,B,C or D 80 to 600
K B81 7 L ,A ,B,C,D or No mark 5 0 to 600
A
SPEC NO: DSAD1549 REV NO: V.10 DATE: JUL/09/2007 PAGE: 4 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: .W.J.ZHU ERP: 1205000006
PHOTOCOUPLER
Part Number: KB817
Fig. 3 Coll ector Current vs.
Collector-emitter Voltage F ig . 4 Relati v e Cu rren t Tr an sfer Ratio
vs. Ambient Temperature
Fig. 1 Current Transfer Ratio v s.
Forward Curr ent Fig. 2 Forward Current vs.
Forward voltage
Fig. 5 Collector-emitter Saturation
Volt ag e vs. Ambien t Temperature Fig. 6 Collect or Dark Current vs.
Ambient Tempera tur e
SPEC NO: DSAD1549 REV NO: V.10 DATE: JUL/09/2007 PAGE: 5 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: .W.J.ZHU ERP: 1205000006
PHOTOCOUPLER
Part Number: KB817
μ
Ω
Fig. 10 Frequency Response Test Circuit for Frequency Response
Ω
Ω
Ω
Fig. 9 Response Time vs.
Load Resistance
Fig. 7 Forw ard Current vs .
Ambient Temperature Fig. 8 Collector Power Dissipation vs.
Ambient Temperature
Test Circuit for Response Time
SPEC NO: DSAD1549 REV NO: V.10 DATE: JUL/09/2007 PAGE: 6 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: .W.J.ZHU ERP: 1205000006
PHOTOCOUPLER
Part Number: KB817
Fig. 11 Collector-emitter Saturation
Voltage vs. Forward Current
*NOTES ON HANDLING
1.Recommended soldering conditions (Dip soldering)
(1) Dip soldering
Temperature 260 °C or belo w (molten solder temperature)
Time Less than 10 seconds.
Cycle One cycle allowed to be dipped in so lder including plastic mold portion.
Flux Rosin flux containing small amount of chorine
(The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
(2) Cautions
Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2.Cautions regarding noise
Be aware that power is suddenly into the componment any surge current may cause dam age happen,
even if the voltage is within the absolute maximum ratings.
SPEC NO: DSAD1549 REV NO: V.10 DATE: JUL/09/2007 PAGE: 7 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: .W.J.ZHU ERP: 1205000006
PHOTOCOUPLER
Part Number: KB817
CAUTION
Within this device there exists GaAs (Gallium Arsenid e) material which is a harmful substance if in-
gested.
GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dis-
solve them.
document, please confirm that this is the latest version. Not all devices / types available
The information in this document is subject to change without notice. Befor e using this
specified operating ranges as set forth in the most recent products specifications.
In developing your designs, please ensure that KINGBRIGHT products are used within
KINGBRIGHT product could cause loss of human life, bodily injury or damage to property.
stress. It is the responsibility of the buyer, when utilizing KINGBRIGHT products, to observe
standards of safety, and to a avoid situations in which a malfunction or failure of a
malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
We are mention about our product quality stablity, semiconductor devices in general can
in every country.
RESTRICTIONS ON PRODUCT USE
SPEC NO: DSAD1549 REV NO: V.10 DATE: JUL/09/2007 PAGE: 8 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: .W.J.ZHU ERP: 1205000006
PHOTOCOUPLER
Part Number: KB817
Dimens ion of C art on
TO LE RANCE : ±0.4[±0. 01 2] UNLE S S OTH E R WISE NOTED .
Dimens ion of Tube
Unit:mm
530±1 0
Part Number Package Package Style
KB817 4-pin DIP 100pcs/each tube
*ORDERING INFORMATION
SPEC NO: DSAD1549 REV NO: V.10 DATE: JUL/09/2007 PAGE: 9 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: .W.J.ZHU ERP: 1205000006
PHOTOCOUPLER
Part Number: KB817
PACKING & LABEL SPECIFICATIONS
