To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
BAV103 — High Voltage, General Purpose Diode
© 2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
BAV103 Rev. 1.1.0 1
April 2013
BAV103
High Voltage, General Purpose Diode
Absolute Maximum Ratings(1)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the re co mmen ded operating conditions and s tres si ng the parts to these level s i s not recommended. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Note:
1. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Thermal Characteristics
Symbol Parameter Value Units
WIV Worki ng Inv ers e Voltage 200 V
IOAverage Rectified Current 200 mA
IFDC Forward Current 500 mA
ifRecurrent Peak Forward Current 600 mA
IFSM Non-repetitive Peak Forward Current Pulse Width = 1.0 s 1.0 A
Pulse Width = 1.0 μs4.0A
TSTG Storage Temperature Range -65 to +200 °C
TJOperating Junc tion Temperature -65 to +200 °C
Symbol Parameter Value Units
PDPower Dissipation 500 mW
Linear Derating Factor from TA = 25°C3.33mW/°C
RθJA Thermal Resistance, Junction to Ambient 350 °C/W
SOD80
Cathode Band
Description
A general purpose diode that couples high forward con-
ductance fast swiching speed and high blocking volt-
ages in a glass leadless LL-34 surface mount package.
Placement of the expansion gap has no relationship to
the location of the cath ode terminal wh ich is ind icated by
the first color band.
BAV103 — High Voltage, General Purpose Diode
© 2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
Rev. 1.1.0 2
Electrical Characteristics
Values are at TC = 25°C unless otherwise noted.
Symbol Parameter Conditions Min. Max. Units
VRBreakdown Voltage IR = 100 μA250V
VFForward Voltage IF = 100 mA 1.00 V
IF = 200 mA 1.25 V
IRReverse Current VR = 200 V 100 nA
VR = 200 V, TA = 150°C100μA
CTTotal Capacitance VR = 0, f = 1.0 MHz 5.00 pF
trr Reverse Recovery Time IF = IR = 30 mA, IRR = 1 mA
RL = 100 Ω50 ns
BAV103 — High Voltage, General Purpose Diode
© 2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
Rev. 1.1.0 3
Typical Performance Characteristics
Figure 1. Forward Current Derating Curve Figure 2. Forward Charateristics
Figure 3. Reverse Characteristi cs Figure 4. Non-Repetitive Surge Current
Figure 5. Junction Capacitance
050100150
0
2
4
6
8
MOUNTED ON PC BOARD,
TA 0.5" (12.7mm) LEAD LENGTH
60Hz RESISTIVE OF INDUCTIVE LOAD
HEAT-SINK
MOUNTING, TC
4"x4"x0.15"
COPPER PLATE
Average Rectified Forward Current, IF[A]
Amb ient Te m peratu re [oC]
Forward Current Derating Curve
Forward Characteristics
0.7 0.8 0.9 1 1.1 1.2 1.3 1.4
0.1
1
10
100
FORWARD VOLTAGE (V)
FORWARD C
T = 25 C
º
A
Puls e Widt h = 30 0μs
1% Duty Cycle
Rev erse Chara cteri stics
0 20406080100120140
0.01
0.1
1
10
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
REVERSE C
T = 100 C
º
C
T = 25 C
º
A
Non-Repeti tiv e Surge Current
12 51020 50100
0
40
80
120
160
200
NUMBER OF CYCLES AT 60Hz
FORWAR
T = 105 C
º
A
J unct i o n Cap aci tanc e
1 5 10 50 100
10
50
100
400
REVERS E VOL T AGE (V)
CAPACITANCE
T = 25 C
º
A
f = 1.0 MHz
Visg = 50m Vp-p
BAV103 — High Voltage, General Purpose Diode
© 2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
Rev. 1.1.0 4
Physical Dimensions
Figure 6. 2-TERMINAL, SOD-80, JEDEC DO-213AC, MINI-MELF
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notic e. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor represe ntative to verify or
obtain the most recent revision. Package specifica tions do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild produ cts.
Always visit Fairchild Semiconduct or’s online packaging are a for the most recent package drawings :
http://www.fairchildsemi.com/packaging/.
For current tape an d reel specifications, visit Fair child Semiconductor’s online pac kaging area:
http://www.fairchildsemi.com/packaging/tr/SOD80A_tnr.pdf.
1.50
1.30
CR0.30
0.20
2.64 REF
0.50
0.30
3.60
3.30
NOTES: UNLESS OTHERWISE SPECIFIED
A) PACKAGE STANDARD REFERENCE:
JEDEC DO-213, VARIATION AC.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
CCORNER RADIUS IS OPTIONAL.
D) DRAWING FILE NAME: SOD80A REV01
SOD-80
®
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC