Solid State Relay Potter & Brumfield SSRM Series 45-65A DIN Mount Solid State Relay With Paired SCR Output, Integral Heatsink File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to confirm the product meets the requirements for a given application. Features Engineering Data * * * * * * * * Form: 1 Form A (SPST-NO). Duty: Continuous. Isolation: 4000V rms input-to-output-to-ground. Insulation Resistance: 109 Ohms, minimum, at 500VDC. Capacitance: 8.0 pf maximum (input to output). Temperature Range: Storage: -40C to +125C Operating: -40C to + 80C Case and Mounting: Refer to outline dimension drawing. Termination: Control: Finger safe (IP20) screw clamps accepting wire size up to #12 AWG (2.5 mm). Load: Finger safe (IP20) screw clamps accepting wire size up to #8 AWG (3.8 mm). Ground: #10 screw with 5/16 in. hex/slottted head. Installation Spacing: Minimum 0.8 in (20 mm) space between units. Approximate Weight: 16.9 oz. (479 g). DIN mount design with integral heatsink. Choice of 45, 55 or 65A rms inverse-parallel connected SCR output. 48 - 660VAC output. 4 -32VDC or 90 - 140Vrms input control. 4000V rms optical isolation. Green LED input status indicator. Finger-safe (IP20) screw clamp terminals for load and control. Ground terminal. Ordering Information Typical Part Number SSRM -600 A 55 1. Basic Series: SSRM = Solid State Relay with Integral Heatsink for DIN Rail Mounting 2. Line Voltage: 600 = 48 - 660 VAC 3. Input Type & Voltage: A = 90 - 140VAC D = 4 - 32VDC 4. Maximum Switching Rating/Output: 45 = 45.0A rms 55 = 55.0A rms 65 = 65.0A rms Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRM-600A45 SSRM-600D45 SSRM-600A55 SSRM-600D55 SSRM-600A65 SSRM-600D65 Input Specifications Parameter Control Voltage Range VIN Reverse Voltage VIN (Max.) Must Operate Voltage VIN(OP) (Min.) Must Realease Voltage VIN(REL) (Min.) Input Current (Typical) Input Current (Max.) 1 01-2018, Rev. 0118 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Conditions AC Control Units DC Control Units @ 25C @ 25C @ 25C @ 25C @ 25C @ 25C 90 - 140 Vrms -- 90 Vrms 10 Vrms 15 mA @ 120 Vrms -- 4.0 - 32 VDC 32 VDC 4.0 VDC 1.0 VDC 14 mA @ 5 VDC 30 mA Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Solid State Relay Potter & Brumfield SSRM Series (Continued) Output Specifications (@ 25 C, unless otherwise specified) 50 40 30 20 10 10 20 30 40 50 60 70 Ambient Temperature (C) 80 55 A 90 Output Current (Arms) 45 A 60 Output Current (Arms) Output Current (Arms) Electrical Characteristics (Thermal Derating Curves) 75 60 45 30 15 10 20 30 40 50 60 70 Ambient Temperature (C) 65 A 90 75 60 45 30 15 10 80 20 30 40 50 60 70 Ambient Temperature (C) 80 Outline Dimensions 3.5 (88.9) TU I NP U MOUNTING HOLE 0.17 (4.3) DIA. S 1.0 (25.4) 0.75 (19.1) T ST A INPUT 3.0 (76.2) OUTPUT 1.75 (44.5) .9 (22.9) 2.5 (63.5) MOUNTING SLOT 0.17 x 0.20 (4.3 x 5.1) 3.0 (76.2) BLACK ANODIZED ALUMINUM HEATSINK 4.3 (109.2) Recommended Torque Range for Terminal Screws: Control: 5 - 6 in lb (0.6 - 0.7 Nm). Output: 10 - 15 in lb (1.1 - 1.7 Nm). 01-2018, Rev. 0118 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 2