Contents Terminals, P-Series 1282250000 - 2012/2013 Terminals, P-Series Terminals, P-Series Overview P-Series B.2 Feed-through terminals B.4 Double-level terminals B.8 Initiator and motor connection terminals B.10 PE terminals B.11 Fuse terminals B.16 Test-disconnect terminals B.18 Actuator and installation terminals - overview B.24 Actuator and installation terminals B.26 Marshalling- and potential distribution terminal blocks - overview B.36 Marshalling- and potential distribution terminal blocks B.38 Accessories P-Series B.44 B B.1 Overview P-Series Terminals, P-Series Terminal blocks with PUSH IN wire connection Wiring is quick and safe Increase your efficiency. The PUSH IN connection method and the associated reduction in the number of versions will help you. B Among the impressive features of the direct PUSH IN connection system are minimal wiring times and reliable, simple handling. Compared to the 3-conductor tension clamps, the direct PUSH IN system achieves time-savings of up to 50 % when connecting the conductor (3.5 seconds per conductor). The stripped solid conductor is simply pushed into the terminal as far as it will go - that's all there is to it. No tools are required, and the result is a reliable, vibration-resistant, gas-tight connection. Even flexible conductors with crimped wire end ferrules or ultrasonicwelded conductors can be connected without any problems. Quick and safe Wiring time is significantly reduced with the direct insertion technique for solid-core and flexible stranded wires with ferrules thanks to the PUSH IN connection method - considerably quicker to connect and no need for additional tools. Contact security The long-term contact force between wire and busbar is ensured with a stainless steel spring. The busbar is made of copper with a tin alloy, this ensures a very low voltage drop. B.2 1282250000 - 2012/2013 Terminals, P-Series Overview P-Series Simple operation The PUSH IN contact`s spring movement is limited by the spring stop mechanism, improper use is prevented by the design of the terminals. B Wemid insulating material * Non-tracking, CTI 600 * Thermally stable up to 120 C * V0 flammability rating to UL94 *Halogen and phosphor free, flame-retardant 1282250000 - 2012/2013 B.3 Feed-through terminals PDU 2.5/4 4 mm Terminals, P-Series 2 connections PDU 2.5/4 3AN 4 mm 3 connections In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 5.1 x 53 x 39 /6 0.13...6 IEC 60947-7-1 Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size V A mm IEC 800 32 4 Ex e II UL CSA 600 (C) 600 (C) 30 (C) 30 (C) AWG 26...10 AWG 26...10 8 kV / 3 A3 / V-0 T 5.1 x 67.5 x 39 /6 0.13...6 II 2 G D EN 60079-7 550 29 4 r{ u#i mm mm mm mm/- IEC 60947-7-1 IEC 800 32 4 Ex e II UL CSA 600 (C) 600 (C) 30 (C) 30 (C) AWG 26...10 AWG 26...10 8 kV / 3 A3 / V-0 T II 2 G D EN 60079-7 550 29 4 r{ u#i Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 3.0 x 0.5 mm Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 3.0 x 0.5 mm Note Ordering data Version Dark beige Wemid Blue Wemid Note Type PDU 2.5/4 PDU 2.5/4 BL Qty. 100 50 Order No. 1896110000 1896230000 Type PDU 2.5/4/3AN PDU 2.5/4/3AN BL Qty. 100 50 Order No. 1896120000 1896240000 For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 Accessories Pluggable cross-connection End plate / Partition plate End bracket Test adapter Screwdriver Reducing sleeves Cover Identification systems Note B.4 2-pole 3-pole 4-pole 10-pole 20-/24-pole Dark beige Wemid PAP 2.5/4 Dark beige Wemid ZEW 35 Standard With assembly peg PTA PDU2.5/4 PTA ZA PDU2.5/4 Standard current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 50 1896300000 PAP 2.5/4/4AN 6 mm 20 9540000000 ZEW 35 5.1 mm 5.1 mm 25 25 1916180000 1916190000 PTA PDU2.5/4 PTA ZA PDU2.5/4 1 9008320000 SDS 0.5X3.0X80 SDS 0.5X3.0X80 current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 50 1896320000 6 mm 20 9540000000 5.1 mm 5.1 mm 25 25 1916180000 1916190000 1 9008320000 For conductors < 0.5 mm / AWG 20 For conductors < 1.0 mm / AWG 18 PRH 2.5/4/1 PRH 2.5/4/2 6.16 mm 6.16 mm 100 100 1916410000 1916400000 PRH 2.5/4/1 PRH 2.5/4/2 6.16 mm 6.16 mm 100 100 1916410000 1916400000 With lightning flash symbol PAD 2.5/4/4 5.1 mm 80 1916150000 PAD 2.5/4/4 5.1 mm 80 1916150000 (see assortment in catalogue 7) Marking tags DEK 5/5 / WS 10/5 DEK 5/5 / WS 10/5 Detailed information for working with twin ferrules can be found in the P Series Accessories section. Detailed information for working with twin ferrules can be found in the P Series Accessories section. 1282250000 - 2012/2013 Feed-through terminals 4 mm 4 connections 4 mm 2 x 2 connections 5.1 x 78.5 x 39 /6 0.13...6 IEC 60947-7-1 IEC 800 32 4 PDU 2.5/4 2x2 Ex e II UL CSA 600 (C) 600 (C) 30 (C) 30 (C) AWG 26...10 AWG 26...10 8 kV / 3 A3 / V-0 T II 2 G D IEC 60947-7-1 UL CSA IEC 800 57 10 8 kV / 3 A3 / V-0 r{ u#i # Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 3.0 x 0.5 mm Qty. 100 50 Order No. 1896130000 1896250000 Ex e II UL CSA 600 (C) 600 (C) 44 (C) 46 (C) AWG 14...8 AWG 14...8 8 kV / 3 A4 / V-0 T II 2 G D EN 60079-7 550 37 10 r{ u#i Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 3.0 x 0.5 mm Type PDU 2.5/4/4AN PDU 2.5/4/4AN BL B 8.1 x 64.5 x 41.5 57 / 10 1.5...10 IEC 60947-7-1 IEC 800 32 4 10 mm 2 connections 5.1 x 78 x 39 /6 0.13...6 EN 60079-7 550 27 4 PDU 6/10 Terminals, P-Series PDU 2.5/4 4AN Rated connection 1.5...6 1.5...10 / 1.5...10 14 / 0.6 x 3.5 mm Type PDU 2.5/4/2X2AN Qty. 50 Order No. 1022220000 Type PDU 6/10 PDU 6/10 BL Qty. 50 25 Order No. 1896140000 1896270000 For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). For 10 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203620000). Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 Type ZQV 6N/2 ZQV 6N/3 ZQV 6N/4 PAP 2.5/4/4AN ZEW 35 PTA PDU2.5/4 PTA ZA PDU2.5/4 current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 Type current 50 1896320000 PAP 2.5/4/4AN Width 2.5 mm 50 1896320000 PAP PDU6/10 6 mm 20 9540000000 ZEW 35 6 mm 20 9540000000 ZEW 35 5.1 mm 5.1 mm 25 25 1916180000 1916190000 PTA PDU2.5/4 PTA ZA PDU2.5/4 5.1 mm 5.1 mm 25 25 1916180000 1916190000 1 9008320000 SDS 0.5X3.0X80 1 9008320000 SDS 0.5X3.0X80 Qty. Order No. ZQV 6N/20 PRH 2.5/4/1 PRH 2.5/4/2 6.16 mm 6.16 mm 100 100 1916410000 1916400000 PRH 2.5/4/1 PRH 2.5/4/2 6.16 mm 6.16 mm 100 100 1916410000 1916400000 PAD 2.5/4/4 5.1 mm 80 1916150000 PAD 2.5/4/4 5.1 mm 80 1916150000 DEK 5/5 / WS 10/5 DEK 5/5 / WS 10/5 Detailed information for working with twin ferrules can be found in the P Series Accessories section. Detailed information for working with twin ferrules can be found in the P Series Accessories section. 1282250000 - 2012/2013 current Width 2.5 mm 6 mm SDS 0.5X3.0X80 PAD 6/10/4 5.3 mm Qty. 60 60 60 Order No. 1906210000 1906220000 1906230000 20 1906240000 20 1896330000 20 9540000000 1 9008320000 80 1916160000 WS 10/8 B.5 Feed-through terminals PDU 6/10 3AN 10 mm PDU 6/10 4AN 10 mm Terminals, P-Series 3 connections NEW In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 8.1 x 82.5 x 41.5 57 / 10 1.5...10 IEC 60947-7-1 Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size V A mm mm mm mm mm/- IEC 800 57 10 Ex e II UL CSA 600 (C) 600 (C) 44 (C) 46 (C) AWG 14...8 AWG 14...8 8 kV / 3 A4 / V-0 T 8.1 x 97 x 41.5 57 / 10 1.5...10 II 2 G D EN 60079-7 550 37 10 IEC 60947-7-1 IEC 800 57 10 r{ u#i {# 14 / 0.6 x 3.5 mm 14 / 0.6 x 3.5 mm Rated connection 1.5...6 1.5...10 / 1.5...10 UL CSA 600 (C) 47 (C) AWG 14...8 8 kV / 3 A4 / V-0 Rated connection 1.5...6 1.5...10 / 1.5...10 Note Ordering data Version Dark beige Wemid Blue Wemid Note Type PDU 6/10/3AN PDU 6/10/3AN BL Qty. 50 50 Order No. 1896150000 1896280000 Type PDU 6/10/4AN PDU 6/10 4AN BL Qty. 50 25 Order No. 1083040000 1165130000 For 10 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203620000). Accessories Pluggable cross-connection End plate / Partition plate End bracket Test adapter Screwdriver Reducing sleeves Cover Identification systems 2-pole 3-pole 4-pole 10-pole 20-/24-pole Type ZQV 6N/2 ZQV 6N/3 ZQV 6N/4 ZQV 6N/20 Dark beige Wemid PAP PDU6/10/3AN Dark beige Wemid ZEW 35 current Qty. 60 60 60 Order No. 1906210000 1906220000 1906230000 Type ZQV 6N/2 ZQV 6N/3 ZQV 6N/4 ZQV 6N/20 Width 2.5 mm 20 1906240000 20 1896340000 6 mm 20 9540000000 ZEW 35 1 9008320000 SDS 0.5X3.0X80 80 1916160000 PAD 6/10/4 current Width 6 mm Qty. 60 60 60 Order No. 1906210000 1906220000 1906230000 20 1906240000 20 9540000000 1 9008320000 80 1916160000 Standard With assembly peg Standard SDS 0.5X3.0X80 For conductors < 0.5 mm / AWG 20 For conductors < 1.0 mm / AWG 18 With lightning flash symbol (see assortment in catalogue 7) Marking tags PAD 6/10/4 WS 10/8 5.3 mm 5.3 mm WS 10/8 Note B.6 1282250000 - 2012/2013 Feed-through terminals PDU 16 16 mm 16 mm Supply terminal 12.1 x 80.5 x 48 / 16 2.5...16 Ex e II IEC 800 76 16 PEI 16 UL CSA 600 (C) 600 (C) 75 (C) 78 (C) AWG 14...4 AWG 14...4 8 kV / 3 B6 / V-0 T Terminals, P-Series 2 connections B 15 x 80.5 x 48 / 16 2.5...16 II 2 G D EN 60079-7 550 59 16 Ex e II IEC 800 76 16 UL CSA 600 (C) 600 (C) 75 (C) 78 (C) AWG 14...4 AWG 14...4 8 kV / 3 B6 / V-0 r{u#i r{ u#i 18 / 1.0 x 5.5 mm 18 / 1.0 x 5.5 mm Rated connection 2.5...16 2.5...16 / 2.5...16 T II 2 G D EN 60079-7 550 66 16 Rated connection 2.5...16 2.5...16 / 2.5...16 Type PDU 16 PDU 16 BL Qty. 25 10 Order No. 1896400000 1896220000 Type PEI 16 PEI 16 BL Qty. 25 25 Order No. 1918780000 1918790000 Terminal contains end plate. No separate end plate is necessary. Type ZQV 16/2 current 76 A Qty. 25 Order No. 1739690000 PAP 16 Width 2.7 mm 10 1896290000 ZEW 35 6 mm 20 9540000000 ZEW 35 1 1274680000 SDIS SL 1.0X4.5X125 80 1916170000 PAD 16/4 SDIS SL 1.0X4.5X125 PAD 16/4 WS 12/8 1282250000 - 2012/2013 7.3 mm Type ZQV 2.5/2 ZQV 6N/3 current 24 A Width 6 mm 7.3 mm Qty. 60 60 Order No. 1608860000 1906220000 20 9540000000 1 1274680000 80 1916170000 WS 12/8 B.7 Double-level terminals PDK 2.5/4 2.5 mm Terminals, P-Series Double-level terminal PDK 2.5/4 V 2.5 mm Vertical cross-connected double-level terminal In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size V A mm 5.1 x 82.5 x 58.5 28 / 6 0.13...6 5.1 x 82.5 x 58.5 28 / 6 0.13...6 IEC 60947-7-1 IEC 60947-7-1 IEC 800 24 2.5 UL CSA 600 (C) 600 (C) 30 (C) 30 (C) AWG 26...10 AWG 26...10 8 kV / 3 A3 / V-0 IEC 800 24 2.5 r{u#i mm mm mm mm/- UL CSA 600 (C) 600 (C) 30 (C) 30 (C) AWG 26...10 AWG 26...10 8 kV / 3 A3 / V-0 r{u#i Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 3.0 x 0.5 mm Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 3.0 x 0.5 mm Note Ordering data Version Dark beige Wemid Blue Wemid Note Type PDK 2.5/4 PDK 2.5/4 BL Qty. 50 50 Order No. 1918770000 1918760000 Type PDK 2.5/4V PDK 2.5/4V BL Qty. 50 50 Order No. 1918730000 1918680000 For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 Accessories Pluggable cross-connection End plate / Partition plate End bracket Screwdriver Reducing sleeves Cover Identification systems Note B.8 2-pole 3-pole 4-pole 10-pole 20-/24-pole Dark beige Wemid PAP PDK 2.5/4 Dark beige Wemid ZEW 35 Standard current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 20 1919720000 PAP PDK 2.5/4 6 mm 20 9540000000 ZEW 35 1 9008320000 SDS 0.5X3.0X80 SDS 0.5X3.0X80 current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 20 1919720000 6 mm 20 9540000000 1 9008320000 For conductors < 0.5 mm / AWG 20 For conductors < 1.0 mm / AWG 18 PRH 2.5/4/1 PRH 2.5/4/2 6.16 mm 6.16 mm 100 100 1916410000 1916400000 PRH 2.5/4/1 PRH 2.5/4/2 6.16 mm 6.16 mm 100 100 1916410000 1916400000 With lightning flash symbol PAD 2.5/4/4 5.1 mm 80 1916150000 PAD 2.5/4/4 5.1 mm 80 1916150000 (see assortment in catalogue 7) Marking tags DEK 5/5 / SNAPMARK I(1805880000) DEK 5/5 / SNAPMARK I(1805880000) Detailed information for working with twin ferrules can be found in the P Series Accessories section. Detailed information for working with twin ferrules can be found in the P Series Accessories section. 1282250000 - 2012/2013 Double-level terminals 2.5 mm PDK 2.5/4 L-PE 2.5 mm Terminals, P-Series PDK 2.5/4 N-L 5.1 x 82.5 x 58.5 28 / 6 0.13...6 N IEC 60947-7-1 IEC 800 24 2.5 5.1 x 82.5 x 58.5 28 / 6 0.13...6 B 3( IEC 60947-7-2 UL CSA 600 (C) 600 (C) 30 (C) 30 (C) AWG 26...10 AWG 26...10 8 kV / 3 A3 / V-0 IEC 800 24 2.5 r{u#i UL CSA 600 (C) 600 (C) 30 (C) 30 (C) AWG 26...10 AWG 26...10 8 kV / 3 A3 / V-0 r{u#i Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 3.0 x 0.5 mm Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 3.0 x 0.5 mm Type PDK 2.5/4N-L Qty. 50 Order No. 1918740000 Type PDK 2.5/4L-PE Qty. 50 Order No. 1918720000 For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 PAP PDK 2.5/4 ZEW 35 current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 20 1919720000 PAP PDK 2.5/4 6 mm 20 9540000000 ZEW 35 1 9008320000 SDS 0.5X3.0X80 SDS 0.5X3.0X80 current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 20 1919720000 6 mm 20 9540000000 1 9008320000 PRH 2.5/4/1 PRH 2.5/4/2 6.16 mm 6.16 mm 100 100 1916410000 1916400000 PRH 2.5/4/1 PRH 2.5/4/2 6.16 mm 6.16 mm 100 100 1916410000 1916400000 PAD 2.5/4/4 5.1 mm 80 1916150000 PAD 2.5/4/4 5.1 mm 80 1916150000 DEK 5/5 / SNAPMARK I(1805880000) DEK 5/5 / SNAPMARK I(1805880000) Detailed information for working with twin ferrules can be found in the P Series Accessories section. Detailed information for working with twin ferrules can be found in the P Series Accessories section. 1282250000 - 2012/2013 B.9 Initiator and motor connection terminals Terminals, P-Series PMAK 4 4 mm PMAK 4 800 V NEW NEW 5.1 x 103.86 x 79.05 /6 0.5...6 6.1 x 107.5 x 82.6 /6 0.5...6 IEC 60947-7-1 (-7-2) IEC 60947-7-1 (-7-2) 4 mm In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size IEC 400 30 4 V A mm mm mm mm mm/- UL CSA 300 (C) 29 (C) AWG 26...10 6 kV / A3 / V-0 IEC 800 32 4 { { 12 / 0.4 x 2.5 mm 12 / 0.4 x 2.5 mm Rated connection 0.5...6 0.5...4 / 4...0.5 UL CSA 600 (C) 29 (C) AWG 26...10 8 kV / A3 / V-0 Rated connection 0.5...6 0.5...4 / 4...0.5 Note Ordering data Version Dark beige Wemid Type PMAK 4 Qty. 50 Note Order No. 1221340000 Type PMAK 4 800V Type Qty. 50 Order No. 1221350000 Accessories Pluggable cross-connection End plate / Partition plate End bracket Screwdriver Identification systems 2-pole 3-pole 4-pole 10-pole Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 Dark beige Wemid PAP PMAK 4 Dark beige Wemid ZEW 35/2 Standard (see assortment in catalogue 7) Marking tags SDS 0.4X2.5X75 DEK 5/5 current 24 A 24 A 24 A 24 A Width 1 mm Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 20 1221360000 8 mm 20 8630740000 ZEW 35/2 1 9009030000 SDS 0.4X2.5X75 current Qty. Order No. Width 8 mm 20 8630740000 1 9009030000 DEK 5/5 Note B.10 1282250000 - 2012/2013 PE terminals PPE 2.5/4 4 mm PPE 2.5/4 3AN 4 mm 3 connections Terminals, P-Series 2 connections In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 5.1 x 53 x 39 /6 0.13...6 PE IEC 60947-7-2 Rated data Rated cross-section Rated voltage to adjoining terminal Rated impulse withstand voltage to adjacent terminal Rated short-time current Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size mm V kV IEC 4 800 8 5.1 x 67 x 39 /6 0.13...6 Ex e II UL AWG 26...10 CSA AWG 26...10 T II 2 G D EN 60079-7 4 IEC 60947-7-2 IEC 4 800 8 Ex e II UL AWG 26...10 480 A (4 mm) 3 A3 / V-0 CSA AWG 26...10 T II 2 G D EN 60079-7 4 480 A (4 mm) 3 A3 / V-0 r{u#i mm mm mm mm/- B PE r{u#i Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 3.0 x 0.5 mm Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 3.0 x 0.5 mm Note Ordering data Version green/yellow Wemid Note Type PPE 2.5/4 Qty. 50 Order No. 1896170000 Type PPE 2.5/4/3AN Qty. 50 Order No. 1896200000 For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). Dark beige Wemid Type PAP 2.5/4 Dark beige Wemid ZEW 35 Accessories End plate / Partition plate End bracket Screwdriver Reducing sleeves Cover Identification systems Note 1282250000 - 2012/2013 Standard Width 2.5 mm Qty. 50 Order No. 1896300000 Type PAP 2.5/4/3AN 6 mm 20 9540000000 ZEW 35 1 9008320000 SDS 0.5X3.0X80 SDS 0.5X3.0X80 Width 2.5 mm Qty. 50 Order No. 1896480000 6 mm 20 9540000000 1 9008320000 For conductors < 0.5 mm / AWG 20 For conductors < 1.0 mm / AWG 18 PRH 2.5/4/1 PRH 2.5/4/2 6.16 mm 6.16 mm 100 100 1916410000 1916400000 PRH 2.5/4/1 PRH 2.5/4/2 6.16 mm 6.16 mm 100 100 1916410000 1916400000 With lightning flash symbol PAD 2.5/4/4 5.1 mm 80 1916150000 PAD 2.5/4/4 5.1 mm 80 1916150000 (see assortment in catalogue 7) Marking tags DEK 5/5 / WS 10/5 DEK 5/5 / WS 10/5 Detailed information for working with twin ferrules can be found in the P Series Accessories section. Detailed information for working with twin ferrules can be found in the P Series Accessories section. B.11 PE terminals PPE 2.5/4 4AN 4 mm Terminals, P-Series 4 connections PPE 6/10 10 mm 2 connections In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 5.1 x 80 x 39 /6 0.13...6 PE IEC 60947-7-2 Rated data Rated cross-section Rated voltage to adjoining terminal Rated impulse withstand voltage to adjacent terminal Rated short-time current Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size mm V kV IEC 4 800 8 8.1 x 63.5 x 41.5 / 10 1.5...10 Ex e II UL AWG 26...10 CSA AWG 26...10 T II 2 G D EN 60079-7 4 IEC 60947-7-2 IEC 10 800 8 Ex e II UL AWG 14...8 480 A (4 mm) 3 A3 / V-0 CSA AWG 14...8 T II 2 G D EN 60079-7 10 1200 A (10 mm) 3 A4 / V-0 r{u#i mm mm mm mm/- PE r{u#i Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 3.0 x 0.5 mm Rated connection 1.5...6 1.5...10 / 1.5...10 14 / 0.6 x 3.5 mm Note Ordering data Version green/yellow Wemid Note Type PPE 2.5/4/4AN Qty. 50 Order No. 1896160000 Type PPE 6/10 Qty. 25 Order No. 1896180000 For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). For 10 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203620000). Dark beige Wemid Type PAP 2.5/4/4AN Dark beige Wemid ZEW 35 Accessories End plate / Partition plate End bracket Screwdriver Reducing sleeves Cover Identification systems Note B.12 Standard Width 2.5 mm Qty. 50 Order No. 1896320000 Type PAP PDU6/10 6 mm 20 9540000000 ZEW 35 1 9008320000 SDS 0.5X3.0X80 SDS 0.5X3.0X80 For conductors < 0.5 mm / AWG 20 For conductors < 1.0 mm / AWG 18 PRH 2.5/4/1 PRH 2.5/4/2 6.16 mm 6.16 mm 100 100 1916410000 1916400000 With lightning flash symbol PAD 2.5/4/4 5.1 mm 80 1916150000 (see assortment in catalogue 7) Marking tags DEK 5/5 / WS 10/5 PAD 6/10/4 Width 2.5 mm Qty. 20 Order No. 1896330000 6 mm 20 9540000000 1 9008320000 80 1916160000 5.3 mm WS 10/8 Detailed information for working with twin ferrules can be found in the P Series Accessories section. 1282250000 - 2012/2013 PE terminals PPE 6/10 3AN 10 mm Terminals, P-Series 3 connections 8.1 x 81.5 x 41.5 / 10 1.5...10 IEC 60947-7-2 IEC 10 800 8 B PE Ex e II UL AWG 14...8 CSA AWG 14...8 T II 2 G D EN 60079-7 10 1200 A (10 mm) 3 A4 / V-0 r{u#i Rated connection 1.5...6 1.5...10 / 1.5...10 14 / 0.6 x 3.5 mm Type PPE 6/10/3AN Qty. 25 Order No. 1896190000 For 10 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203620000). Type PAP PDU6/10/3AN ZEW 35 Width 2.5 mm Qty. 20 Order No. 1896340000 6 mm 20 9540000000 1 9008320000 80 1916160000 SDS 0.5X3.0X80 PAD 6/10/4 5.3 mm WS 10/8 1282250000 - 2012/2013 B.13 PE terminals PPE 16 16 mm Terminals, P-Series 2 connections In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 12.1 x 81 x 48 / 16 2.5...16 PE IEC 60947-7-2 Rated data Rated cross-section Rated voltage to adjoining terminal Rated impulse withstand voltage to adjacent terminal Rated short-time current Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size mm V kV IEC 16 800 8 Ex e II UL AWG 14...4 CSA AWG 14...4 T II 2 G D EN 60079-7 16 1920 A (16 mm) 3 B6 / V-0 r{u#i mm mm mm mm/- Rated connection 2.5...16 2.5...16 / 2.5...16 18 / 1.0 x 5.5 mm Note Ordering data Version green/yellow Wemid Type PPE 16 Qty. 10 Order No. 1896210000 Note Accessories Pluggable cross-connection End plate / Partition plate End bracket Screwdriver Cover Identification systems Type ZQV 16/2 current 76 A Qty. 25 Order No. 1739690000 Dark beige Wemid PAP 16 Width 2.7 mm 10 1896290000 Dark beige Wemid ZEW 35 6 mm 20 9540000000 1 1274680000 80 1916170000 2-pole Standard SDIS SL 1.0X4.5X125 With lightning flash symbol PAD 16/4 (see assortment in catalogue 7) Marking tags WS 10/12 7.3 mm Note B.14 1282250000 - 2012/2013 PE terminals 4 mm Terminals, P-Series PDK 2.5/4 PE In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 5.1 x 82.5 x 58.5 /6 0.13...6 IEC 60947-7-2 Rated data Rated cross-section Rated voltage to adjoining terminal Rated impulse withstand voltage to adjacent terminal Rated short-time current Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size mm V kV IEC 4 800 8 B PE Ex e II UL AWG 26...10 CSA AWG 26...10 T II 2 G D EN 60079-7 4 480 A (4 mm) 3 A3 / V-0 r{u#i mm mm mm mm/- Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 Note Ordering data Version green/yellow Wemid Note Type PDK 2.5/4 PE Qty. 50 Order No. 1918710000 For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). Accessories End plate / Partition plate End bracket Screwdriver Reducing sleeves Cover Identification systems Note 1282250000 - 2012/2013 Dark beige Wemid Type PAP PDK 2.5/4 Dark beige Wemid ZEW 35 Standard Width 2.5 mm Qty. 20 Order No. 1919720000 6 mm 20 9540000000 1 9008320000 SDS 0.5X3.0X80 For conductors < 0.5 mm / AWG 20 For conductors < 1.0 mm / AWG 18 PRH 2.5/4/1 PRH 2.5/4/2 6.16 mm 6.16 mm 100 100 1916410000 1916400000 With lightning flash symbol PAD 2.5/4/4 5.1 mm 80 1916150000 (see assortment in catalogue 7) Marking tags DEK 5/5 / WS 10/5 Detailed information for working with twin ferrules can be found in the P Series Accessories section. B.15 Fuse terminals PSI 6/10 10 mm PSI 6/10 Terminals, P-Series Overload and short-circuit protection NEW In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 12.2 x 81 x 40.35 10 / 10 1.5...10 IEC 60947-7-1 Rated data Rated voltage to adjoining terminal Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Blade size IEC 250 6.3 10 V A mm UL Type PSI 6/10 CSA Order No. 1083050000 8 kV / 3 V-0 # mm mm Rated connection 1.5...6 1.5...10 / 1.5...10 0.6 x 3.5 mm Arrangement Individual In combination Note Applications Only short-circuit Overload and shortprotection circuit protection TA max. Nominal values TA max. Nominal values 35 C 2.5 W / 6.3 A 26 C 2.5 W / 6.3 A Ordering data Version Dark beige Wemid black Note Type PSI 6/10 PSI 6/10 SW Qty. 25 25 Order No. 1083050000 1165140000 Short-circuit protection aligned individually: 10 A and 4 W. Accessories Pluggable cross-connection 3-pole 5-pole 7-pole 9-pole End plate / Partition plate End bracket Screwdriver G-fuse cartridge, 5 x 20mm (IEC 60127-2) Identification systems Note B.16 Type ZQV 4/3 GE ZQV 4/5 GE ZQV 4/7 GE ZQV 4/9 GE Dark beige Wemid black PAP PTL/PSI 6/10 PAP PTL/PSI 6/10 SW Dark beige Wemid ZEW 35 Standard 0.25 A fast 0.50 A fast 1.00 A fast 2.00 A fast (see assortment in catalogue 7) Marking tags SDS 0.5X3.0X80 G 20/0.25A/F G 20/0.50A/F G 20/1.00A/F G 20/2.00A/F current 32 A 32 A 32 A 32 A Width 2.5 mm 2.5 mm Qty. 60 20 20 20 Order No. 1608960000 1608980000 1609000000 1609020000 20 20 1165320000 1165330000 6 mm 20 9540000000 1 9008320000 10 10 10 10 0430500000 0430600000 0430700000 0430900000 WS 10/8 Every second pin on the cross-connection must be broken out. 1282250000 - 2012/2013 Fuse terminals - Accessories Terminals, P-Series Cartridge fuses and gauge pieces for Weidmuller fuse terminals Cartridge fuses for terminal type PSI 6/10 Technical data / Ordering data G-type cartridge fuses 5 x 20 without indicators to IEC 60127-2 (VDE 0820 pt.2 Bl) Size (mm) Nom. current (A) Type 0.1 (F) 5 x 20 0.2 (F) 0.25 (F) breaking capacity 1500 A 0.5 (F) (at 250 V, 50 Hz, cos : 0.7) 0.63 (F) 1.0 (F) 1.6 (F) 2.0 (F) 2.5 (F) 3.15 (F) 4.0 (F) 5.0 (F) 6.3 (F) G 20/0.10A/F G 20/0.20A/F G 20/0.25A/F G 20/0.50A/F G 20/0.63A/F G 20/1.00A/F G 20/1.60A/F G 20/2.00A/F G 20/2.50A/F G 20/3.15A/F G 20/4.00A/F G 20/5.00A/F G 20/6.30A/F Qty. 10 10 10 10 10 10 10 10 10 10 10 10 10 Order No. 0430300000 0430400000 0430500000 0430600000 0439000000 0430700000 0430800000 0430900000 0431000000 0431100000 0431200000 0431300000 0431400000 B (M) = medium-blow (F) = fast-blow 1282250000 - 2012/2013 B.17 Test-disconnect terminals PTR 2.5/4 2.5 mm PTR 2.5/4 O TNHE 2.5 mm Terminals, P-Series With isolator In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 5.1 x 71 x 39.5 22 / 6 0.13...6 5.1 x 71 x 39.5 22 / 6 0.13...6 IEC 60947-7-1 IEC 60947-7-1 Rated data Rated voltage of feed-through terminal Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size IEC 500 22 2.5 V A mm UL CSA 600 (C) 600 (C) 24 (C) 24 (C) AWG 26...10 AWG 26...10 6 kV / 3 A3 / V-0 IEC 500 22 2.5 CSA 6 kV / 3 A3 / V-0 r{ u#i mm mm mm mm/- UL # Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 0.6 x 3.5 mm Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 0.6 x 3.5 mm Note Ordering data Version Dark beige Wemid Blue Wemid Without isolator, Dark beige Wemid Note Type PTR 2.5/4 PTR 2.5/4 BL Qty. 50 50 Order No. 1933950000 1933970000 Type Qty. PTR 2.5/4 O TNHE Order No. 1933910000 50 For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 Accessories Pluggable cross-connection 2-pole 3-pole 4-pole 10-pole 20-/24-pole End plate / Partition plate End bracket Screwdriver Testing / Checking Holder for cartridge fuse 5 x 20mm Module connector (max, 250 V) Disconnect plug Identification systems Note B.18 Dark beige Wemid PAP PTR2.5/4 Dark beige Wemid ZEW 35 Standard SDS 0.5X3.0X80 Test plug PS 2.3 RT 400 V AC/DC, without LED 10 - 36 V AC/DC, red LED 140 - 250 V AC/DC, red LED without fittings with wire jumper With 1N4007 diode removable, as replacement for release lever (see assortment in catalogue 7) Marking tags SIHA 3/G20 SIHA 3/G20/LD 10-36V SIHA 3/G20/LD 140-250V BEST BEST/DRBR BEST/D TNST current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 20 1934680000 PAP PTR2.5/4 6 mm 20 9540000000 ZEW 35 1 9008320000 SDS 0.5X3.0X80 5.4 mm 20 0180400000 PS 2.3 RT 5.95 mm 5.95 mm 5.95 mm 25 25 25 7921560000 7921570000 7921600000 SIHA 3/G20 SIHA 3/G20/LD 10-36V SIHA 3/G20/LD 140-250V 5.1 mm 5.1 mm 5.1 mm 50 50 50 1833100000 1878570000 1878560000 BEST BEST/DRBR BEST/D 50 1833090000 TNST current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 20 1934680000 6 mm 20 9540000000 1 9008320000 5.4 mm 20 0180400000 5.95 mm 5.95 mm 5.95 mm 25 25 25 7921560000 7921570000 7921600000 5.1 mm 5.1 mm 5.1 mm 50 50 50 1833100000 1878570000 1878560000 50 1833090000 DEK 5/5 / WS 10/5 DEK 5/5 / WS 10/5 Detailed information for working with twin ferrules can be found in the P Series Accessories section. Detailed information for working with twin ferrules can be found in the P Series Accessories section. 1282250000 - 2012/2013 Test-disconnect terminals PTR 2.5/4 3AN 2.5 mm PTR 2.5/4 3AN O TNHE 2.5 mm 2.5 mm With isolator 5.1 x 85 x 39.5 22 / 6 0.13...6 5.1 x 85 x 39.5 22 / 6 0.13...6 IEC 60947-7-1 IEC 500 22 2.5 PTR 2.5/4 4AN IEC 500 22 2.5 IEC 60947-7-1 UL CSA IEC 500 22 2.5 6 kV / 3 A3 / V-0 r{u#i # Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 0.6 x 3.5 mm Qty. 50 50 Order No. 1933980000 1933930000 UL CSA 600 (C) 600 (C) 24 (C) 24 (C) AWG 26...10 AWG 26...10 6 kV / 3 A3 / V-0 r{u#i Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 0.6 x 3.5 mm Type PTR 2.5/4/3AN PTR 2.5/4/3AN BL B 5.1 x 99 x 39.5 22 / 6 0.13...6 IEC 60947-7-1 UL CSA 600 (C) 600 (C) 24 (C) 24 (C) AWG 26...10 AWG 26...10 6 kV / 3 A3 / V-0 Terminals, P-Series With isolator Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 0.6 x 3.5 mm Type Qty. PTR 2.5/4/3AN O TNHE Order No. 1933990000 50 Type PTR 2.5/4/4AN PTR 2.5/4/4AN BL Qty. 50 50 Order No. 1933940000 1934000000 For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 PAP PTR2.5/4/3AN ZEW 35 current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 20 1934690000 PAP PTR2.5/4/3AN 6 mm 20 9540000000 ZEW 35 1 9008320000 SDS 0.5X3.0X80 5.4 mm 20 0180400000 PS 2.3 RT 5.95 mm 5.95 mm 5.95 mm 25 25 25 7921560000 7921570000 7921600000 SIHA 3/G20 SIHA 3/G20/LD 10-36V SIHA 3/G20/LD 140-250V 5.1 mm 5.1 mm 5.1 mm 50 50 50 1833100000 1878570000 1878560000 BEST BEST/DRBR BEST/D 50 1833090000 TNST SDS 0.5X3.0X80 PS 2.3 RT SIHA 3/G20 SIHA 3/G20/LD 10-36V SIHA 3/G20/LD 140-250V BEST BEST/DRBR BEST/D TNST current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 20 1934690000 PAP PTR2.5/4/4AN 6 mm 20 9540000000 ZEW 35 1 9008320000 SDS 0.5X3.0X80 5.4 mm 20 0180400000 PS 2.3 RT 5.95 mm 5.95 mm 5.95 mm 25 25 25 7921560000 7921570000 7921600000 SIHA 3/G20 SIHA 3/G20/LD 10-36V SIHA 3/G20/LD 140-250V 5.1 mm 5.1 mm 5.1 mm 50 50 50 1833100000 1878570000 1878560000 BEST BEST/DRBR BEST/D 50 1833090000 TNST current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 20 1934700000 6 mm 20 9540000000 1 9008320000 5.4 mm 20 0180400000 5.95 mm 5.95 mm 5.95 mm 25 25 25 7921560000 7921570000 7921600000 5.1 mm 5.1 mm 5.1 mm 50 50 50 1833100000 1878570000 1878560000 50 1833090000 DEK 5/5 / WS 10/5 DEK 5/5 / WS 10/5 DEK 5/5 / WS 10/5 Detailed information for working with twin ferrules can be found in the P Series Accessories section. Detailed information for working with twin ferrules can be found in the P Series Accessories section. Detailed information for working with twin ferrules can be found in the P Series Accessories section. 1282250000 - 2012/2013 B.19 Test-disconnect terminals 2.5 mm Terminals, P-Series PTR 2.5/4 4AN O TNHE In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 5.1 x 99 x 39.5 22 / 6 0.13...6 IEC 60947-7-1 Rated data Rated voltage of feed-through terminal Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size IEC 500 22 2.5 V A mm UL CSA 6 kV / 3 A3 / V-0 # mm mm mm mm/- Rated connection 0.5...6 0.5...4 / 0.5...4 0.5...2.5 12 / 0.6 x 3.5 mm Note Ordering data Version Dark beige Wemid Blue Wemid Without isolator, Dark beige Wemid Note Type Qty. PTR 2.5/4/4AN O TNHE Order No. 1933890000 50 For 4 mm conductors, use ferrules with a cross-section-optimised plastic collar (Order no. 9203630000). Accessories Pluggable cross-connection 2-pole 3-pole 4-pole 10-pole 20-/24-pole End plate / Partition plate End bracket Screwdriver Testing / Checking Holder for cartridge fuse 5 x 20mm Module connector (max, 250 V) Disconnect plug Identification systems Note B.20 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 Dark beige Wemid PAP PTR2.5/4/4AN Dark beige Wemid ZEW 35 Standard SDS 0.5X3.0X80 Test plug PS 2.3 RT 400 V AC/DC, without LED 10 - 36 V AC/DC, red LED 140 - 250 V AC/DC, red LED without fittings with wire jumper With 1N4007 diode removable, as replacement for release lever (see assortment in catalogue 7) Marking tags SIHA 3/G20 SIHA 3/G20/LD 10-36V SIHA 3/G20/LD 140-250V BEST BEST/DRBR BEST/D TNST current 24 A 24 A 24 A 24 A 24 A Width 2.5 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 20 1934700000 6 mm 20 9540000000 1 9008320000 5.4 mm 20 0180400000 5.95 mm 5.95 mm 5.95 mm 25 25 25 7921560000 7921570000 7921600000 5.1 mm 5.1 mm 5.1 mm 50 50 50 1833100000 1878570000 1878560000 50 1833090000 DEK 5/5 / WS 10/5 Detailed information for working with twin ferrules can be found in the P Series Accessories section. 1282250000 - 2012/2013 Test-disconnect terminals 4 mm PDL 4/TR/DU/PE O TNHE 4 mm Terminals, P-Series PDL 4/TR/DU O TNHE In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data Rated data Rated voltage of feed-through terminal Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size 5.1 x 100 x 49.5 /4 0.08...4 5.1 x 100 x 49.5 /4 0.08...4 IEC 60947-7-1 IEC 60947-7-1 (-7-2) IEC 400 20 4 V A mm UL CSA 150 (C) 300 (B) 17 (C) 6.3 (B) AWG 28...10 AWG 28...10 4 kV / 3 A3 / V-0 IEC 400 20 4 r{u# mm mm mm mm/- PE B UL CSA 300 (D) 300 (B) 10 (D) 6.3 (B) AWG 28...10 AWG 28...10 4 kV / 3 A3 / V-0 r{u# Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Note Ordering data Version Dark beige Wemid Without isolator, Dark beige Wemid Note Type Qty. PDL 4/TR/DU O TNHE Order No. 1899210000 50 Type Qty. PDL 4/TR/DU/PE O TNHE Order No. 1899220000 50 ...without disconnecting lever. Suitable for the SIHA 3 fuse holder with G fuse, for the BEST component plug and for the TNST isolating plug. ...without disconnecting lever. Suitable for the SIHA 3 fuse holder with G fuse, for the BEST component plug and for the TNST isolating plug. Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 Accessories Pluggable cross-connection End plate / Partition plate End bracket Screwdriver Holder for cartridge fuse 5 x 20mm Module connector (max, 250 V) Disconnect plug Dark beige Wemid PAP PDL4 current 24 A 24 A 24 A 24 A 24 A Width 1.5 mm Dark beige Wemid ZEW 35/2 8 mm 2-pole 3-pole 4-pole 10-pole 20-/24-pole Standard 400 V AC/DC, without LED 10 - 36 V AC/DC, red LED 140 - 250 V AC/DC, red LED without fittings with wire jumper With 1N4007 diode removable, as replacement for release lever Identification systems Note 1282250000 - 2012/2013 (see assortment in catalogue 7) Marking tags BEST BEST/DRBR BEST/D TNST Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 20 1883210000 20 Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 PAP PDL4 current 24 A 24 A 24 A 24 A 24 A Width 1.5 mm 20 1883210000 8630740000 ZEW 35/2 8 mm 20 8630740000 1 9008320000 SDS 0.5X3.0X80 1 9008320000 5.95 mm 5.95 mm 5.95 mm 25 25 25 7921560000 7921570000 7921600000 SIHA 3/G20 SIHA 3/G20/LD 10-36V SIHA 3/G20/LD 140-250V 5.95 mm 5.95 mm 5.95 mm 25 25 25 7921560000 7921570000 7921600000 5.1 mm 5.1 mm 5.1 mm 50 50 50 1833100000 1878570000 1878560000 BEST BEST/DRBR BEST/D 5.1 mm 5.1 mm 5.1 mm 50 50 50 1833100000 1878570000 1878560000 50 1833090000 TNST 50 1833090000 SDS 0.5X3.0X80 SIHA 3/G20 SIHA 3/G20/LD 10-36V SIHA 3/G20/LD 140-250V Qty. 60 60 60 20 20 DEK 5/5 / WS 10/5 DEK 5/5 / WS 10/5 Detailed information for working with twin ferrules can be found in the P Series Accessories section. Detailed information for working with twin ferrules can be found in the P Series Accessories section. B.21 Test-disconnect terminals PDL 4/TR/DU 4 mm Terminals, P-Series With isolator PDL 4/TR/DU/PE 4 mm With isolator In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data Rated data Rated voltage of feed-through terminal Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size 5.1 x 100 x 49.5 /4 0.08...4 5.1 x 100 x 49.5 /4 0.08...4 IEC 60947-7-1 IEC 60947-7-1 (-7-2) IEC 400 20 4 V A mm UL CSA 150 (C) 300 (B) 17 (C) 20 (B) AWG 28...10 AWG 28...10 4 kV / 3 A3 / V-0 IEC 400 20 4 r{u# mm mm mm mm/- PE UL CSA 300 (D) 300 (B) 10 (D) 20 (B) AWG 28...10 AWG 28...10 4 kV / 3 A3 / V-0 r{u# Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Note Ordering data Version Dark beige Wemid Without isolator, Dark beige Wemid Note Type PDL 4/TR/DU Qty. 50 Order No. 1899190000 Without isolator: PDL 4 TR/DU O TNHE Order no.: 1899210000 Type PDL 4/TR/DU/PE Qty. 50 Order No. 1899200000 Without isolator: PDL 4 TR/DU/PE O TNHE Order no.: 1899220000 Accessories Pluggable cross-connection End plate / Partition plate End bracket Screwdriver Holder for cartridge fuse 5 x 20mm Module connector (max, 250 V) Disconnect plug Identification systems Note B.22 Dark beige Wemid PAP PDL4 current 24 A 24 A 24 A 24 A 24 A Width 1.5 mm Dark beige Wemid ZEW 35/2 8 mm 2-pole 3-pole 4-pole 10-pole 20-/24-pole Standard 400 V AC/DC, without LED 10 - 36 V AC/DC, red LED 140 - 250 V AC/DC, red LED without fittings with wire jumper With 1N4007 diode removable, as replacement for release lever (see assortment in catalogue 7) Marking tags Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 BEST BEST/DRBR BEST/D TNST Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 20 1883210000 20 Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 PAP PDL4 current 24 A 24 A 24 A 24 A 24 A Width 1.5 mm 20 1883210000 8630740000 ZEW 35/2 8 mm 20 8630740000 1 9008320000 SDS 0.5X3.0X80 1 9008320000 5.95 mm 5.95 mm 5.95 mm 25 25 25 7921560000 7921570000 7921600000 SIHA 3/G20 SIHA 3/G20/LD 10-36V SIHA 3/G20/LD 140-250V 5.95 mm 5.95 mm 5.95 mm 25 25 25 7921560000 7921570000 7921600000 5.1 mm 5.1 mm 5.1 mm 50 50 50 1833100000 1878570000 1878560000 BEST BEST/DRBR BEST/D 5.1 mm 5.1 mm 5.1 mm 50 50 50 1833100000 1878570000 1878560000 50 1833090000 TNST 50 1833090000 SDS 0.5X3.0X80 SIHA 3/G20 SIHA 3/G20/LD 10-36V SIHA 3/G20/LD 140-250V Qty. 60 60 60 20 20 DEK 5/5 / WS 10/5 DEK 5/5 / WS 10/5 Detailed information for working with twin ferrules can be found in the P Series Accessories section. Detailed information for working with twin ferrules can be found in the P Series Accessories section. 1282250000 - 2012/2013 Test-disconnect terminals 10 mm PTD 6/10 10 mm Terminals, P-Series PTL 6/10 NEW NEW 8.1 x 82 x 40.35 / 10 1.5...10 8.1 x 82 x 40.35 / 10 1.5...10 IEC 60947-7-1 IEC 60947-7-1 In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data Rated data Rated voltage of feed-through terminal Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size V A mm mm mm mm mm/- IEC 800 57 10 UL CSA 600 (C) 45 (C) AWG 16...16 8 kV / 3 A5 / V-0 IEC 800 57 10 {# { 14 / 0.6 x 3.5 mm 14 / 0.6 x 3.5 mm Rated connection 1.5...6 1.5...10 / 1.5...10 B UL CSA 600 (C) 45 (C) AWG 16...16 8 kV / 3 A5 / V-0 Rated connection 1.5...6 1.5...10 / 1.5...10 Note Ordering data Version Dark beige Wemid Type PTL 6/10/STB Dark beige Wemid black Type PAP PTL/PSI 6/10 PAP PTL/PSI 6/10 SW Dark beige Wemid ZEW 35 Qty. 50 Note Order No. 1084780000 Type PTD 6/10/STB Qty. 50 Order No. 1084790000 Accessories End plate / Partition plate End bracket Screwdriver Miscellaneous accessories Threaded bushing Screwable cross-connection Testing / Checking Identification systems Standard Short-circuit plug, 2-pole Standard 2-pole 3-pole 4-pole 10-pole Socket - blue Socket - yellow Socket - green Socket - magenta Socket Socket - blue Socket - yellow Socket - green Socket - magenta Socket (see assortment in catalogue 7) Marking tags Width 2.5 mm 2.5 mm Qty. 20 20 Order No. 1165320000 1165330000 Type PAP PTL/PSI 6/10 PAP PTL/PSI 6/10 SW 6 mm 20 9540000000 ZEW 35 1 9008320000 SDS 0.5X3.0X80 20 0270960000 QS 2/8/4 50 1255010000 GWHUE M3 WTL6 50 50 50 20 1052360000 1054760000 1054860000 1052260000 WQV 6/2 WQV 6/3 WQV 6/4 WQV 6/10 50 50 50 50 500 50 50 50 50 50 1936290000 1936240000 1936250000 1936260000 2012420000 1847790000 1847760000 1847770000 1847780000 1847740000 STB 21.6/45 BL STB 21.6/45 GE STB 21.6/45 GN STB 21.6/45 VI STB 14/D6/4/M3 SAK10 STB 36.8/IH/BL WTL6/1 STB 36.8/IH/GE WTL6/1 STB 36.8/IH/GN WTL6/1 STB 36.8/IH/VI WTL6/1 STB 36.8/IH/DB WTL6/1 SDS 0.5X3.0X80 QS 2/8/4 GWHUE M3 WTL6 WQV 6/2 WQV 6/3 WQV 6/4 WQV 6/10 STB 21.6/45 BL STB 21.6/45 GE STB 21.6/45 GN STB 21.6/45 VI STB 14/D6/4/M3 SAK10 STB 36.8/IH/BL WTL6/1 STB 36.8/IH/GE WTL6/1 STB 36.8/IH/GN WTL6/1 STB 36.8/IH/VI WTL6/1 STB 36.8/IH/DB WTL6/1 DEK 5/8 12 mm current 57 A 57 A 57 A 57 A Width 6.1 mm 6.1 mm 6.1 mm 6.1 mm 6 mm 6 mm 6 mm 6 mm 6 mm Width 2.5 mm 2.5 mm Qty. 20 20 Order No. 1165320000 1165330000 6 mm 20 9540000000 1 9008320000 20 0270960000 50 1255010000 50 50 50 20 1052360000 1054760000 1054860000 1052260000 50 50 50 50 500 50 50 50 50 50 1936290000 1936240000 1936250000 1936260000 2012420000 1847790000 1847760000 1847770000 1847780000 1847740000 12 mm current 57 A 57 A 57 A 57 A Width 6.1 mm 6.1 mm 6.1 mm 6.1 mm 6 mm 6 mm 6 mm 6 mm 6 mm DEK 5/8 Note 1282250000 - 2012/2013 B.23 Terminals, P-Series Actuator and installation terminals - overview Distribution terminal blocks for simple maintenance a A cost-effective solution for building and facility installations: with "PUSH IN" connections B This addition to Weidmuller`s comprehensive line of "PUSH IN" terminal block products speeds up your installation while also providing better power specifications in a smaller size. It offers key advantages wherever solid wires or wires with ferrules are being connected. Quick and safe A universal wire connection range from 2.5 to 16 mm. Solid and flexible conductors with wire-end ferrules can be connected using this connection system. PUSH IN with screw combination The large cross-section of screw terminals can be combined with PUSH IN terminals. B.24 1282250000 - 2012/2013 Increased flexibility Simple to swap-out PDL terminals from the group when connected with the PDU 16S. Terminals, P-Series Actuator and installation terminals - overview B Simple handling The asymmetric design of the terminal enables the neutral-wire busbar to be bypassed. 1282250000 - 2012/2013 B.25 Actuator and installation terminals PDU 16S Terminals, P-Series Feed-through terminals 16 mm NEW In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm 12.1 x 96.5 x 48 / 16 2.5...16 Technical data Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size V A mm IEC 800 76 16 UL CSA 8 kV / 3 B6 / V-0 mm mm mm mm/- Rated connection 2.5...16 2.5...16 / 2.5...16 18 / 1.0 x 5.5 mm Note Ordering data Version Dark beige Wemid Type PDU 16S Qty. 25 Order No. 1139580000 Note Accessories Pluggable cross-connection End plate / Partition plate End bracket Screwdriver Cover Identification systems Type ZQV 16/2 current 76 A Qty. 25 Order No. 1739690000 Dark beige Wemid PAP PDU16S Width 2.7 mm 10 1139910000 Dark beige Wemid ZEW 35 6 mm 20 9540000000 1 1274680000 80 1916170000 2-pole Standard SDIS SL 1.0X4.5X125 With lightning flash symbol PAD 16/4 (see assortment in catalogue 7) Marking tags WS 12/8 7.3 mm Note B.26 1282250000 - 2012/2013 Actuator and installation terminals 16 mm Terminals, P-Series PPE 16S PE terminals NEW In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 12.1 x 96.5 x 48 / 16 2.5...16 PE B IEC 60947-7-2 Rated data Rated cross-section Rated voltage to adjoining terminal Rated impulse withstand voltage to adjacent terminal Rated short-time current Pollution severity Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Blade size mm V kV IEC 16 800 8 UL CSA 1920 A (16 mm) 3 V-0 mm mm Rated connection 2.5...16 2.5...16 / 2.5...16 1.0 x 5.5 mm Note Ordering data Version green/yellow Wemid Type PPE 16S Qty. 10 Order No. 1139570000 Note Accessories Pluggable cross-connection End plate / Partition plate End bracket Screwdriver Cover Identification systems Type ZQV 16/2 current 76 A Qty. 25 Order No. 1739690000 Dark beige Wemid PAP PDU16S Width 2.7 mm 10 1139910000 Dark beige Wemid ZEW 35 6 mm 20 9540000000 1 1274680000 80 1916170000 2-pole Standard SDIS SL 1.0X4.5X125 With lightning flash symbol PAD 16/4 (see assortment in catalogue 7) Marking tags WS 10/12 7.3 mm Note 1282250000 - 2012/2013 B.27 Actuator and installation terminals PNT 2.5/4 4 mm PNT 6/10 10 mm Terminals, P-Series Neutral conductor disconnect terminals In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 5.1 x 63.5 x 48.5 /6 0.08...6 NT V A mm IEC 250 32 4 NT IEC 60947-7-1 IEC 60947-7-1 Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size 8.1 x 72.5 x 46.5 / 10 1.5...10 UL CSA IEC 250 41 10 UL 4 kV / 3 A3 / V-0 8 kV / 3 A4 / V-0 u# mm mm mm mm/- CSA u#i Rated connection 0.5...6 2.5...4 / 0.5...4 ...1.5 12 / 3.0 x 0.5 mm Rated connection 1.5...6 1.5...10 / 1.5...10 14 / 0.6 x 3.5 mm Note Ordering data Version Blue Wemid Type PNT 2.5/4 2-pole 3-pole 4-pole 10-pole 20-/24-pole Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 ZQV 2.5/20 Qty. 50 Note Order No. 1896360000 Type PNT 6/10 Type ZQV 6N/2 ZQV 6N/3 ZQV 6N/4 Qty. 25 Order No. 1896370000 Accessories Pluggable cross-connection Support bracket for 10 x 3 (required every 20 cm) Blue Wemid For a vertical installation position End bracket Screwdriver Busbar 10 x 3 (140 A) Dark beige Wemid Standard OK, Busbar up to OK, TS35 = 25.5 mm Clamping yoke for power supply to 10 x 3 busbars Rigid / flexible 0.5 - 6 / 4 mm Rigid / flexible 6 - 16 mm Flexible 16 - 35 mm Identification systems (see assortment in catalogue 7) Marking tags PHP PNT 2.5/4 PHP PNT 2.5/4 SO ZEW 35 current 24 A 24 A 24 A 24 A 24 A Width 3 mm 3 mm Qty. 60 60 60 20 20 Order No. 1608860000 1608870000 1608880000 1608940000 1908960000 ZQV 6N/20 20 20 1896390000 1916790000 PHP PNT 6/10 PHP PNT 6/10 SO Width 3 mm 3 mm 6 mm 20 9540000000 ZEW 35 6 mm 1 9008320000 SDS 0.5X3.0X80 SDS 0.5X3.0X80 current Qty. 60 60 60 Order No. 1906210000 1906220000 1906230000 20 1906240000 10 10 1896100000 1919710000 20 9540000000 1 9008320000 SSCH 10X3X1000 CU/SN 10 mm 1 0348900000 SSCH 10X3X1000 CU/SN 10 mm 1 0348900000 ZF 4 S BL ZB 16K BL ZB 35/M6X16 6.1 mm 10 mm 14 mm 50 50 20 1814660000 0502880000 0266500000 ZF 4 S BL ZB 16K BL ZB 35/M6X16 6.1 mm 10 mm 14 mm 50 50 20 1814660000 0502880000 0266500000 DEK 5/5 / WS 10/5 WS 10/8 Note B.28 1282250000 - 2012/2013 Actuator and installation terminals 16 mm Terminals, P-Series PNT 16 12.1 x 80.5 x 50 / 16 2.5...16 IEC 400 76 16 NT UL B CSA 8 kV / 3 B6 / V-0 u#i Rated connection 2.5...16 2.5...16 / 2.5...16 18 / 1.0 x 5.5 mm Type PNT 16 Type Qty. 10 Order No. 1896350000 current Qty. PHP PNT16 PHP PNT16 SO Width 3 mm 3 mm 10 10 1896380000 1919690000 ZEW 35 6 mm 20 9540000000 1 1274680000 SDIS SL 1.0X4.5X125 Order No. SSCH 10X3X1000 CU/SN 10 mm 1 0348900000 ZF 4 S BL ZB 16K BL ZB 35/M6X16 6.1 mm 10 mm 14 mm 50 50 20 1814660000 0502880000 0266500000 WS 10/12 1282250000 - 2012/2013 B.29 Actuator and installation terminals PDL 4 S/NT/L/PE 4 mm PDL 4 S/L/L 4 mm Terminals, P-Series Distribution terminals for 10 x 3 mm In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 5.1 x 100 x 48.5 36 / 4 0.08...4 NT L PE IEC 400 32 4 V A mm L UL CSA IEC 400 32 4 UL 6 kV / 3 A3 / V-0 mm mm mm mm/- Dark beige Wemid Type PDL 4 S/NT/L/PE CSA 6 kV / 3 A3 / V-0 # Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm L IEC 60947-7-1 IEC 60947-7-1 (-7-2) Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size 5.1 x 100 x 48.5 36 / 4 0.08...4 #i Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Note Ordering data Version Qty. 50 Note Order No. 1837060000 Type PDL 4 S/L/L Qty. 50 Order No. 1837030000 Accessories Pluggable cross-connection End plate / Partition plate 2-pole 3-pole 4-pole 10-pole Dark beige Wemid Support bracket for 10 x 3 (required every 20 cm) Blue Wemid For a vertical installation position End bracket Screwdriver Busbar 10 x 3 (140 A) Dark beige Wemid Standard OK, Busbar up to OK, TS35 = 25.5 mm Clamping yoke for power supply to 10 x 3 busbars Rigid / flexible 0.5 - 6 / 4 mm Rigid / flexible 6 - 16 mm Flexible 16 - 35 mm Identification systems (see assortment in catalogue 7) Marking tags Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 PAP PDL4S current 24 A 24 A 24 A 24 A Width 1.5 mm 20 1837070000 PHP PDL PHP PDL SO 3 mm 3 mm 20 20 ZEW 35/2 8 mm SDIS 0.4X2.5X75 Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 PAP PDL4S current 24 A 24 A 24 A 24 A Width 1.5 mm 20 1837070000 1837090000 1837080000 PHP PDL PHP PDL SO 3 mm 3 mm 20 20 1837090000 1837080000 20 8630740000 ZEW 35/2 8 mm 20 8630740000 1 9008370000 SDIS 0.4X2.5X75 1 9008370000 SSCH 10X3X1000 CU/SN 10 mm 1 0348900000 SSCH 10X3X1000 CU/SN 10 mm 1 0348900000 ZF 4 S BL ZB 16 ZKSC ZB 35/M6X16 6.1 mm 10 mm 14 mm 50 50 20 1814660000 0316600000 0266500000 ZF 4 S BL ZB 16 ZKSC ZB 35/M6X16 6.1 mm 10 mm 14 mm 50 50 20 1814660000 0316600000 0266500000 DEK 5/5 DEK 5/5 Note B.30 1282250000 - 2012/2013 Actuator and installation terminals 4 mm PDL 4 S/N/L/PE 4 mm PDL 4 S/N/L 4 mm Terminals, P-Series PDL 4 S/L 5.1 x 100 x 48.5 36 / 4 0.08...4 L IEC 60947-7-1 IEC 400 32 4 5.1 x 100 x 48.5 36 / 4 0.08...4 N L PE IEC 60947-7-1 (-7-2) UL CSA IEC 400 32 4 CSA IEC 400 32 4 Order No. 1847610000 Type PDL 4 S/N/L/PE Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 PAP PDL4S current 24 A 24 A 24 A 24 A Width 1.5 mm 20 1837070000 PHP PDL PHP PDL SO 3 mm 3 mm 20 20 ZEW 35/2 8 mm CSA Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Qty. 50 Order No. 1837050000 Type PDL 4 S/N/L Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 PAP PDL4S current 24 A 24 A 24 A 24 A Width 1.5 mm 20 1837070000 1837090000 1837080000 PHP PDL PHP PDL SO 3 mm 3 mm 20 20 20 8630740000 ZEW 35/2 8 mm 1 9008370000 SDIS 0.4X2.5X75 Qty. 50 Order No. 1847630000 Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 PAP PDL4S current 24 A 24 A 24 A 24 A Width 1.5 mm 20 1837070000 1837090000 1837080000 PHP PDL PHP PDL SO 3 mm 3 mm 20 20 1837090000 1837080000 20 8630740000 ZEW 35/2 8 mm 20 8630740000 1 9008370000 SDIS 0.4X2.5X75 1 9008370000 SSCH 10X3X1000 CU/SN 10 mm 1 0348900000 SSCH 10X3X1000 CU/SN 10 mm 1 0348900000 SSCH 10X3X1000 CU/SN 10 mm 1 0348900000 ZF 4 S BL ZB 16 ZKSC ZB 35/M6X16 6.1 mm 10 mm 14 mm 50 50 20 1814660000 0316600000 0266500000 ZF 4 S BL ZB 16 ZKSC ZB 35/M6X16 6.1 mm 10 mm 14 mm 50 50 20 1814660000 0316600000 0266500000 ZF 4 S BL ZB 16 ZKSC ZB 35/M6X16 6.1 mm 10 mm 14 mm 50 50 20 1814660000 0316600000 0266500000 DEK 5/5 1282250000 - 2012/2013 DEK 5/5 B #i Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Qty. 50 L 6 kV / 3 A3 / V-0 #i Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm SDIS 0.4X2.5X75 UL 6 kV / 3 A3 / V-0 #i Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 N IEC 60947-7-1 UL 6 kV / 3 A3 / V-0 Type PDL 4 S/L 5.1 x 100 x 48.5 36 / 4 0.08...4 DEK 5/5 B.31 Actuator and installation terminals PDL 4 S/N 4 mm PDL 4 S/L/L/PE 4 mm Terminals, P-Series Distribution terminals for 10 x 3 mm In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data 5.1 x 100 x 48.5 36 / 4 0.08...4 N V A mm IEC 400 32 4 L UL CSA IEC 400 32 4 UL 6 kV / 3 A3 / V-0 CSA 6 kV / 3 A3 / V-0 #i mm mm mm mm/- L PE IEC 60947-7-1 (-7-2) IEC 60947-7-1 Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size 5.1 x 100 x 48.5 36 / 4 0.08...4 #i Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Note Ordering data Version Dark beige Wemid Type PDL 4 S/N Qty. 50 Note Order No. 1847620000 Type PDL 4 S/L/L/PE Qty. 50 Order No. 1837040000 Accessories Pluggable cross-connection End plate / Partition plate 2-pole 3-pole 4-pole 10-pole Dark beige Wemid Support bracket for 10 x 3 (required every 20 cm) Blue Wemid For a vertical installation position End bracket Screwdriver Busbar 10 x 3 (140 A) Dark beige Wemid Standard OK, Busbar up to OK, TS35 = 25.5 mm Clamping yoke for power supply to 10 x 3 busbars Rigid / flexible 0.5 - 6 / 4 mm Rigid / flexible 6 - 16 mm Flexible 16 - 35 mm Identification systems (see assortment in catalogue 7) Marking tags Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 PAP PDL4S current 24 A 24 A 24 A 24 A Width 1.5 mm 20 1837070000 PHP PDL PHP PDL SO 3 mm 3 mm 20 20 ZEW 35/2 8 mm SDIS 0.4X2.5X75 Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 PAP PDL4S current 24 A 24 A 24 A 24 A Width 1.5 mm 20 1837070000 1837090000 1837080000 PHP PDL PHP PDL SO 3 mm 3 mm 20 20 1837090000 1837080000 20 8630740000 ZEW 35/2 8 mm 20 8630740000 1 9008370000 SDIS 0.4X2.5X75 1 9008370000 SSCH 10X3X1000 CU/SN 10 mm 1 0348900000 SSCH 10X3X1000 CU/SN 10 mm 1 0348900000 ZF 4 S BL ZB 16 ZKSC ZB 35/M6X16 6.1 mm 10 mm 14 mm 50 50 20 1814660000 0316600000 0266500000 ZF 4 S BL ZB 16 ZKSC ZB 35/M6X16 6.1 mm 10 mm 14 mm 50 50 20 1814660000 0316600000 0266500000 DEK 5/5 DEK 5/5 Note B.32 1282250000 - 2012/2013 Actuator and installation terminals PDL 4 NT/L/PE 4 mm PDL 4 NT/L 4 mm Terminals, P-Series Modular distribution terminals In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm 5.1 x 100 x 49.1 /4 0.08...4 NT L PE 5.1 x 100 x 49.1 /4 0.08...4 NT L B Technical data Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size V A mm IEC 400 20 4 UL CSA 300 (D) 300 (B) 10 (D) 20 (B) AWG 28...10 AWG 28...10 6 kV / 3 A3 / V-0 IEC 400 20 4 r{u# mm mm mm mm/- UL CSA 150 (C) 300 (B) 17 (C) 20 (B) AWG 28...10 AWG 28...10 6 kV / 3 A3 / V-0 r{u# Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Note Ordering data Version Dark beige Wemid Type PDL 4/NT/L/PE Qty. 50 Note Order No. 1882620000 Type PDL 4/NT/L Qty. 50 Order No. 1882600000 Accessories Pluggable cross-connection End plate / Partition plate End bracket Screwdriver Identification systems Dark beige Wemid PAP PDL4 current 24 A 24 A 24 A 24 A Width 1.5 mm Dark beige Wemid ZEW 35/2 8 mm 2-pole 3-pole 4-pole 10-pole Standard (see assortment in catalogue 7) Marking tags Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 SDIS 0.4X2.5X75 DEK 5/5 Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 20 1883210000 20 1 Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 PAP PDL4 current 24 A 24 A 24 A 24 A Width 1.5 mm 20 1883210000 8630740000 ZEW 35/2 8 mm 20 8630740000 9008370000 SDIS 0.4X2.5X75 1 9008370000 DEK 5/5 Note 1282250000 - 2012/2013 B.33 Actuator and installation terminals PDL 4 N/L/PE 4 mm PDL 4 L/L/PE 4 mm Terminals, P-Series Modular distribution terminals In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm 5.1 x 100 x 49.1 /4 0.08...4 N L PE 5.1 x 100 x 49.5 /4 0.08...4 L L PE Technical data Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size V A mm IEC 400 32 4 UL CSA 300 (D) 300 (B) 10 (D) 20 (B) AWG 28...10 AWG 28...10 6 kV / 3 A3 / V-0 IEC 400 32 4 r{u# mm mm mm mm/- UL CSA 300 (D) 300 (B) 10 (D) 20 (B) AWG 28...10 AWG 28...10 6 kV / 3 A3 / V-0 r{u# Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Note Ordering data Version Dark beige Wemid Type PDL 4/N/L/PE Qty. 50 Note Order No. 1899180000 Type PDL 4/L/L/PE Qty. 50 Order No. 1882610000 Accessories Pluggable cross-connection End plate / Partition plate End bracket Screwdriver Identification systems Dark beige Wemid PAP PDL4 current 24 A 24 A 24 A 24 A Width 1.5 mm Dark beige Wemid ZEW 35/2 8 mm 2-pole 3-pole 4-pole 10-pole Standard (see assortment in catalogue 7) Marking tags Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 SDIS 0.4X2.5X75 DEK 5/5 Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 20 1883210000 20 1 Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 PAP PDL4 current 24 A 24 A 24 A 24 A Width 1.5 mm 20 1883210000 8630740000 ZEW 35/2 8 mm 20 8630740000 9008370000 SDIS 0.4X2.5X75 1 9008370000 DEK 5/5 Note B.34 1282250000 - 2012/2013 Actuator and installation terminals 4 mm Terminals, P-Series PDL 4 L/L 5.1 x 100 x 49.5 /4 0.08...4 IEC 400 32 4 L L B UL CSA 150 (C) 300 (B) 17 (C) 20 (B) AWG 28...10 AWG 28...10 6 kV / 3 A3 / V-0 r{u# Rated connection 0.5...4 / 1.5...4 0.5...4 / 0.5...4 0.5...1.5 12 / 3.0 x 0.5 mm Type PDL 4/L/L Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/10 Qty. 50 Order No. 1882590000 Qty. 60 60 60 20 Order No. 1608860000 1608870000 1608880000 1608940000 PAP PDL4 current 24 A 24 A 24 A 24 A Width 1.5 mm 20 1883210000 ZEW 35/2 8 mm 20 8630740000 1 9008370000 SDIS 0.4X2.5X75 DEK 5/5 1282250000 - 2012/2013 B.35 Terminals, P-Series Marshalling- and potential distribution terminal blocks - overview The PRV and PPV marshalling- and potential distribution terminal blocks a The affordable and space-saving method for signal distribution and routing B Today's control systems are becoming increasingly more complex with higher and higher demands for the monitoring and capturing of operational data. These demands have resulted in a relentless growth in the number of field measuring devices. These trends pose new challenges to engineers. On one hand, the additional signals for the automation need to be connected and processed. On the other hand this means using up more space and increased costs. These challenges can be simply dealt with using Weidmuller`s new marshalling and distribution terminals. The PRV, with its PUSH IN wire connection, is the most compact marshalling terminal worldwide. Amazing space saving In comparison to conventional multi-tier terminals, the new marshalling- and potential distribution terminal blocks have a higher contact density. Up to 50 % less space is used in the electrical cabinet with the optimised PRV design. 16x 8x 4x 8x Optimal orientation Colour coding on the terminals provides for easy assignment of signals and and clarity during extension work or maintenance. B.36 1282250000 - 2012/2013 Marshalling- and potential distribution terminal blocks - overview Terminals, P-Series Compact and redundant The PUSH IN double connection offers redundant connection, taking up minimal space. B PPV power distribution terminal For simple and safe potential distribution, the four-level and eight-level marshalling terminals are also available as potential distribution terminals. a Low contact resistance The busbar`s unique V-shape allows for varying expansion of materials and ensures low contact resistances. 1282250000 - 2012/2013 Simple - The stripped wire is simply inserted into the terminal point, and a reliable, vibration proof, gas-tight connection is guaranteed. Safe - The best designed connection method features high wire extraction forces and vibration resistance. B.37 Marshalling- and potential distribution terminal blocks PRV 4 RT Terminals, P-Series PRV 1.5 mm PRV 4 WS NEW NEW 9.2 x 70 x 13 / 1.5 0.2...1.5 9.2 x 70 x 13 / 1.5 0.2...1.5 1.5 mm In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data IEC 60947-7-1, DIN EN 60079 Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size V A mm IEC 250 10 1.5 UL CSA 300 (D) 300 (D) 10 (D) 10 (D) AWG 26...16 AWG 26...16 4 kV / 3 / V-0 IEC 250 10 1.5 r{ # mm mm mm mm/- UL CSA 300 (D) 300 (D) 10 (D) 10 (D) AWG 26...16 AWG 26...16 4 kV / 3 / V-0 r{ # Rated connection 0.2...1.5 / 0.2...1.5 0.2...1.5 / 0.2...1.5 Rated connection 0.2...1.5 / 0.2...1.5 0.2...1.5 / 0.2...1.5 10 / 0.6 x 3.5 mm 10 / 0.6 x 3.5 mm Note Ordering data Version Black for TS 35x15 Blue for TS 35x15 Black for TS 35x7.5 Blue for TS 35x7.5 Note Type PRV 4 SW 35X15 RT PRV 4 BL 35X15 RT PRV 4 SW 35X7.5 RT PRV 4 BL 35X7.5 RT Qty. 20 20 20 20 Order No. 1173810000 1267890000 1173830000 1267900000 RT = red actuators Type PRV 4 SW 35X15 WS PRV 4 BL 35X15 WS PRV 4 SW 35X7.5 WS PRV 4 BL 35X7.5 WS Qty. 20 20 20 20 Order No. 1173820000 1173920000 1173840000 1173930000 WS = white actuators Accessories End plate Marker holder Partition plate End bracket Screwdriver Pluggable cross-connection Identification systems black blue grey Black for TS 35x15 Blue for TS 35x15 Black for TS 35x7.5 Blue for TS 35x7.5 Unprinted Printed 0...3 or 0...7 or 0...15 Printed 1...4 or 1...8 or 1...16 Printed A...D or A...H or A...P black Standard 2-pole (see assortment in catalogue 7) Marking tags Type PAP PRV/PPV4 SW PAP PRV/PPV4 BL PAP PRV/PPV4 GR Width 3 mm 3 mm 3 mm Qty. 10 10 10 Order No. 1173750000 1268010000 1211450000 Type PAP PRV/PPV4 SW PAP PRV/PPV4 BL PAP PRV/PPV4 GR 10.2 mm 10.2 mm 10.2 mm 10.2 mm 20 20 20 20 1173590000 1267980000 1173600000 1267990000 BZT PRV4 SW 35X15 BZT PRV4 BL 35X15 BZT PRV4 SW 35X7.5 BZT PRV4 BL 35X7.5 TW PRV4 TW PRV4 0-3 TW PRV4 1-4 TW PRV4 A-D 2 mm 2 mm 2 mm 2 mm 10 10 10 10 1173700000 1230060000 1230050000 1230070000 ZEW 35/2 SW 8 mm 20 BZT PRV4 SW 35X15 BZT PRV4 BL 35X15 BZT PRV4 SW 35X7.5 BZT PRV4 BL 35X7.5 SDIS SL 0.6X3.5X100 SRC-I QV P WS 7.8/9.2 current Width 3 mm 3 mm 3 mm Qty. 10 10 10 Order No. 1173750000 1268010000 1211450000 10.2 mm 10.2 mm 10.2 mm 10.2 mm 20 20 20 20 1173590000 1267980000 1173600000 1267990000 TW PRV4 TW PRV4 0-3 TW PRV4 1-4 TW PRV4 A-D 2 mm 2 mm 2 mm 2 mm 10 10 10 10 1173700000 1230060000 1230050000 1230070000 1162610000 ZEW 35/2 SW 8 mm 20 1162610000 1 1274660000 SDIS SL 0.6X3.5X100 1 1274660000 10 8870840000 SRC-I QV P 10 8870840000 current WS 7.8/9.2 Note B.38 1282250000 - 2012/2013 Marshalling- and potential distribution terminal blocks 1.5 mm PRV 8 WS/RT NEW NEW 9.2 x 120 x 10 / 1.5 0.2...1.5 9.2 x 120 x 10 / 1.5 0.2...1.5 1.5 mm Terminals, P-Series PRV 8 RT/WS PRV In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data B IEC 60947-7-1 Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size V A mm IEC 250 8 1.5 UL CSA 300 (D) 300 (D) 10 (D) 10 (D) AWG 26...16 AWG 26...16 4 kV / 3 / V-0 IEC 250 8 1.5 r{ # mm mm mm mm/- UL CSA 300 (D) 300 (D) 10 (D) 10 (D) AWG 26...16 AWG 26...16 4 kV / 3 / V-0 r{ # Rated connection 0.2...1.5 / 0.2...1.5 0.2...1.5 / 0.2...1.5 Rated connection 0.2...1.5 / 0.2...1.5 0.2...1.5 / 0.2...1.5 10 / 0.6 x 3.5 mm 10 / 0.6 x 3.5 mm Note Ordering data Version Black for TS 35x15 Blue for TS 35x15 Black for TS 35x7.5 Blue for TS 35x7.5 Note Type PRV 8 SW 35X15 RT/WS PRV 8 BL 35X15 RT/WS PRV 8 SW 35X7.5 RT/WS PRV 8 BL 35X7.5 RT/WS Qty. 20 20 20 20 Order No. 1173740000 1267830000 1173790000 1267840000 RT = red actuators WS = white actuators Type PRV 8 SW 35X15 WS/RT PRV 8 BL 35X15 WS/RT PRV 8 SW 35X7.5 WS/RT PRV 8 BL 35X7.5 WS/RT Qty. 20 20 20 20 Order No. 1173780000 1173900000 1173800000 1173910000 RT = red actuators WS = white actuators Accessories End plate Marker holder Partition plate End bracket Screwdriver Pluggable cross-connection Identification systems black blue grey Black for TS 35x15 Blue for TS 35x15 Black for TS 35x7.5 Blue for TS 35x7.5 Unprinted Printed 0...3 or 0...7 or 0...15 Printed 1...4 or 1...8 or 1...16 Printed A...D or A...H or A...P black Standard 2-pole (see assortment in catalogue 7) Marking tags Type PAP PRV/PPV8 SW PAP PRV/PPV8 BL PAP PRV/PPV8 GR Width 3 mm 3 mm 3 mm Qty. 10 10 10 Order No. 1173720000 1268000000 1211460000 Type PAP PRV/PPV8 SW PAP PRV/PPV8 BL PAP PRV/PPV8 GR 10.2 mm 10.2 mm 10.2 mm 10.2 mm 20 20 20 20 1173570000 1267950000 1173580000 1267970000 BZT PRV8 SW 35X15 BZT PRV8 BL 35X15 BZT PRV8 SW 35X7.5 BZT PRV8 BL 35X7.5 TW PRV8 TW PRV8 0-7 TW PRV8 1-8 TW PRV8 A-H 2 mm 2 mm 2 mm 2 mm 10 10 10 10 1173670000 1230090000 1230080000 1230110000 ZEW 35/2 SW 8 mm 20 BZT PRV8 SW 35X15 BZT PRV8 BL 35X15 BZT PRV8 SW 35X7.5 BZT PRV8 BL 35X7.5 SDIS SL 0.6X3.5X100 SRC-I QV P WS 7.8/9.2 current Width 3 mm 3 mm 3 mm Qty. 10 10 10 Order No. 1173720000 1268000000 1211460000 10.2 mm 10.2 mm 10.2 mm 10.2 mm 20 20 20 20 1173570000 1267950000 1173580000 1267970000 TW PRV8 TW PRV8 0-7 TW PRV8 1-8 TW PRV8 A-H 2 mm 2 mm 2 mm 2 mm 10 10 10 10 1173670000 1230090000 1230080000 1230110000 1162610000 ZEW 35/2 SW 8 mm 20 1162610000 1 1274660000 SDIS SL 0.6X3.5X100 1 1274660000 10 8870840000 SRC-I QV P 10 8870840000 current WS 7.8/9.2 Note 1282250000 - 2012/2013 B.39 Marshalling- and potential distribution terminal blocks PRV 16 RT/WS Terminals, P-Series PRV 1.5 mm PRV 16 WS/RT NEW NEW 9.2 x 225 x 11 / 1.5 0.2...1.5 9.2 x 225 x 11 / 1.5 0.2...1.5 1.5 mm In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. B Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data IEC 60947-7-1, DIN EN 60079 IEC 60947-7-1, DIN EN 60079 Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size IEC 250 6 1.5 V A mm UL CSA 300 (D) 300 (D) 1 (D) 1 (D) AWG 26...16 AWG 26...16 4 kV / 3 / V-0 IEC 250 6 1.5 r{ # mm mm mm mm/- UL CSA 300 (D) 300 (D) 1 (D) 1 (D) AWG 26...16 AWG 26...16 4 kV / 3 / V-0 r{ # Rated connection 0.2...1.5 / 0.2...1.5 0.2...1.5 / 0.2...1.5 Rated connection 0.2...1.5 / 0.2...1.5 0.2...1.5 / 0.2...1.5 10 / 0.6 x 3.5 mm 10 / 0.6 x 3.5 mm Note Ordering data Version Black for TS 35x15 Blue for TS 35x15 Black for TS 35x7.5 Blue for TS 35x7.5 Note Type PRV 16 SW 35X15 RT/WS PRV 16 BL 35X15 RT/WS PRV 16 SW 35X7.5 RT/WS PRV 16 BL 35X7.5 RT/WS Qty. 20 20 20 20 Order No. 1173620000 1267790000 1173680000 1267810000 RT = red actuators WS = white actuators Type PRV 16 SW 35X15 WS/RT PRV 16 BL 35X15 WS/RT PRV 16 SW 35X7.5 WS/RT PRV 16 BL 35X7.5 WS/RT Qty. 20 20 20 20 Order No. 1173650000 1267800000 1173710000 1267820000 RT = red actuators WS = white actuators Accessories End plate Marker holder Partition plate End bracket Screwdriver Pluggable cross-connection Identification systems black blue grey Black for TS 35x15 Blue for TS 35x15 Black for TS 35x7.5 Blue for TS 35x7.5 Type BZT PRV16 SW 35X15 BZT PRV16 BL 35X15 BZT PRV16 SW 35X7.5 BZT PRV16 BL 35X7.5 Width Qty. Order No. Type 10.2 mm 10.2 mm 10.2 mm 10.2 mm 20 20 20 20 1173540000 1267930000 1173550000 1267940000 BZT PRV16 SW 35X15 BZT PRV16 BL 35X15 BZT PRV16 SW 35X7.5 BZT PRV16 BL 35X7.5 Width Qty. Order No. 10.2 mm 10.2 mm 10.2 mm 10.2 mm 20 20 20 20 1173540000 1267930000 1173550000 1267940000 Unprinted Printed 0...3 or 0...7 or 0...15 Printed 1...4 or 1...8 or 1...16 Printed A...D or A...H or A...P TW PRV16 TW PRV16 0-15 TW PRV16 1-16 TW PRV16 A-P 2 mm 2 mm 2 mm 2 mm 10 10 10 10 1173630000 1230130000 1230120000 1230140000 TW PRV16 TW PRV16 0-15 TW PRV16 1-16 TW PRV16 A-P 2 mm 2 mm 2 mm 2 mm 10 10 10 10 1173630000 1230130000 1230120000 1230140000 black WEW 35/1 SW 12 mm 50 1162600000 WEW 35/1 SW 12 mm 50 1162600000 1 1274660000 SDIS SL 0.6X3.5X100 1 1274660000 10 8870840000 SRC-I QV P 10 8870840000 Standard 2-pole (see assortment in catalogue 7) Marking tags SDIS SL 0.6X3.5X100 SRC-I QV P WS 7.8/9.2 current current WS 7.8/9.2 Note B.40 1282250000 - 2012/2013 Marshalling- and potential distribution terminal blocks 1.5 mm PPV 8 NEW NEW 9.2 x 70 x / 1.5 0.2...1.5 9.2 x 120 x / 1.5 0.2...1.5 1.5 mm Terminals, P-Series PPV 4 PPV In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix must be followed. Width/Length/Height of lowest version max. current / max. cond. cross-section Max. clamping range mm A/mm mm Technical data B IEC 60947-7-1, DIN EN 60079 Rated data Rated voltage Rated current Rated cross-section Rated impulse withstand voltage / Pollution severity Gauge to IEC 60947-1 / Flammability class UL94 Approvals Clamped conductors (H05V/H07V) Solid / stranded Flexible / Flexible with ferrule Twin wire-end ferrule Stripping length / Blade size V A mm IEC 250 17.5 1.5 UL CSA 300 (D) 300 (D) 10 (D) 10 (D) AWG 26...16 AWG 26...16 4 kV / 3 / V-0 IEC 250 17.5 1.5 r{ # mm mm mm mm/- UL CSA 300 (D) 300 (D) 10 (D) 10 (D) AWG 26...16 AWG 26...16 4 kV / 3 / V-0 r{ # Rated connection 0.2...1.5 / 0.2...1.5 0.2...1.5 / 0.2...1.5 Rated connection 0.2...1.5 / 0.2...1.5 0.2...1.5 / 0.2...1.5 10 / 0.6 x 3.5 mm 10 / 0.6 x 3.5 mm Note Ordering data Version Blue for TS 35x15 Grey for TS 35x15 Blue for TS 35x7.5 Grey for TS 35x7.5 Note Type PPV 4 BL 35X15 DGR PPV 4 GR 35X15 DGR PPV 4 BL 35X7.5 DGR PPV 4 GR 35X7.5 DGR Qty. 20 20 20 20 Order No. 1267910000 1173880000 1267920000 1173890000 DRG = dark grey actuators Type PPV 8 BL 35X15 DGR PPV 8 GR 35X15 DGR PPV 8 BL 35X7.5 DGR PPV 8 GR 35X7.5 DGR Qty. 20 20 20 20 Order No. 1267870000 1173850000 1267880000 1173870000 DRG = dark grey actuators Accessories End plate Marker holder Partition plate End bracket Screwdriver Pluggable cross-connection Identification systems black blue grey Black for TS 35x15 Blue for TS 35x15 Black for TS 35x7.5 Blue for TS 35x7.5 Unprinted Printed 0...3 or 0...7 or 0...15 Printed 1...4 or 1...8 or 1...16 Printed A...D or A...H or A...P black Standard 2-pole (see assortment in catalogue 7) Marking tags Type PAP PRV/PPV4 SW PAP PRV/PPV4 BL PAP PRV/PPV4 GR Width 3 mm 3 mm 3 mm Qty. 10 10 10 Order No. 1173750000 1268010000 1211450000 Type PAP PRV/PPV8 SW PAP PRV/PPV8 BL PAP PRV/PPV8 GR 10.2 mm 10.2 mm 10.2 mm 10.2 mm 20 20 20 20 1173590000 1267980000 1173600000 1267990000 BZT PRV8 SW 35X15 BZT PRV8 BL 35X15 BZT PRV8 SW 35X7.5 BZT PRV8 BL 35X7.5 TW PRV4 TW PRV4 0-3 TW PRV4 1-4 TW PRV4 A-D 2 mm 2 mm 2 mm 2 mm 10 10 10 10 1173700000 1230060000 1230050000 1230070000 ZEW 35/2 SW 8 mm 20 BZT PRV4 SW 35X15 BZT PRV4 BL 35X15 BZT PRV4 SW 35X7.5 BZT PRV4 BL 35X7.5 SDIS SL 0.6X3.5X100 SRC-I QV P WS 7.8/9.2 current Width 3 mm 3 mm 3 mm Qty. 10 10 10 Order No. 1173720000 1268000000 1211460000 10.2 mm 10.2 mm 10.2 mm 10.2 mm 20 20 20 20 1173570000 1267950000 1173580000 1267970000 TW PRV8 TW PRV8 0-7 TW PRV8 1-8 TW PRV8 A-H 2 mm 2 mm 2 mm 2 mm 10 10 10 10 1173670000 1230090000 1230080000 1230110000 1162610000 ZEW 35/2 SW 8 mm 20 1162610000 1 1274660000 SDIS SL 0.6X3.5X100 1 1274660000 10 8870840000 SRC-I QV P 10 8870840000 current WS 7.8/9.2 Note 1282250000 - 2012/2013 B.41 Terminals, P-Series Marshalling- and potential distribution terminal blocks 16 level terminals with Pushers in white and red PRV 16 SW 35X7.5 WS/RT Marker WS7.8/9.2 PLUS MC GR B 16 level terminals with Pushers in red and white PRV 16 SW 35X7.5 RT/WS End bracket in black WEW 35/1 SW Mounting rail Type TS35, 7.5 mm high Printed partition plate TW PRV 1-16 Technical data Marker carrier BZT PRV 16 SW 35X7.5 Marker WS7.8/9.2 PLUS MC GR B.42 Partition plate unprinted unprinted unprinted printed 0...3 printed 0...7 printed 0...15 printed 1...4 printed 1...8 printed 1...16 printed A...D printed A...H printed A...P Type TW PRV4 TW PRV8 TW PRV16 TW PRV4 0-3 TW PRV8 0-7 TW PRV16 0-15 TW PRV4 1-4 TW PRV8 1-8 TW PRV16 1-16 TW PRV4 A-D TW PRV8 A-H TW PRV16 A-P Order No. 1173700000 1173670000 1173630000 1230060000 1230090000 1230130000 1230050000 1230080000 1230120000 1230070000 1230110000 1230140000 1282250000 - 2012/2013 Terminals, P-Series B 1282250000 - 2012/2013 B.43 Terminals, P-Series Accessories P-Series Extra functions Introduction B The accessories for our other ranges of modular terminals can also be used with the P-Series in order to reduce the number of variations. The use of accessories enables users to adapt and mould the terminals, to perfectly match the needs of their application. All Weidmuller accessories are built to the same high-quality standards as the terminals themselves. Retaining and end plates Page B.46 End plates cover the open side of the terminals. This ensures touch protection for fingers and hands. Retaining plates, which for the P-Series also function as end plates, must be positioned every 200 mm when using the 10 x 3 busbar. B.44 1282250000 - 2012/2013 Terminals, P-Series Accessories P-Series Fastening Chapter F Electrical supply Page B.47 Electrical distribution Page B.48 B An end bracket is fitted on the mounting rail to the right and left of the terminals to ensure that they sit firmly in position. The marking surface of the end bracket can also be used for group marking. Details of the wide range of Weidmuller end brackets and mounting rails are given in chapter F. There are three options for supplying power to the Weidmuller PUSH IN modular terminals: the PEI 16 supply terminals, the PDU 6/10 or the PDU 2.5/4 feed-through terminal. The input current is split into several output currents by means of crossconnections. A 16 mm2 conductor carries the incoming supply, which is distributed to the neighbouring terminals with cross-sections from 0.5 to 10 mm2. A pluggable cross-connection system (ZQV) is available for all P-Series terminals. The current is distributed across any number of terminals by simply plugging the cross-connection into the middle of the terminals. As a rule, 400 V can be transmitted across the cross-section, depending on the rated voltage of the terminal. Testing / checking Marking Connecting Page B.50 The plug-in test adapter (PTA) is used as a single unit and as a test adapter strip for voltage measurement in control cabinets. The test adapter is ideal for convenient testing of assembled terminals. It is simply clipped into the crossconnection channel of the terminal. This ensures that it makes contact with the busbar carrying the current. 1282250000 - 2012/2013 Page B.50 Weidmuller`s identification systems in chapter F are used to mark PUSH IN technology terminals. Individual terminals, groups of terminals and cables or conductors can be marked. Marker strips are available for every size of terminal, which means that several terminals can be marked together. Page B.53 The PUSH IN connection saves time and requires solid single-core wires or wire-end ferrules. Ferrules have wellestablished installation advantages. In addition, they guarantee an electrical connection of permanent and consistent quality. By using twin ferrules, it is possible to connect two wires in one terminal point. B.45 Accessories - Support plates and end plates Terminals, P-Series Support plates and end plates B Ordering data Type Width 3 mm PAP PRV/PPV8 SW PAP PRV/PPV8 GR Width 3 mm PAP PRV/PPV4 SW PAP PRV/PPV4 GR PAP PRV/PPV4 BL Width 3 mm PAP 2.5/4 PAP 2.5/4 BL Colour Qty. black grey 10 10 1173720000 PRV 8 1211460000 PPV 8 black grey blue 10 10 10 1173750000 PRV 4 1211450000 PPV 4 1268010000 dark beige blue 50 50 Width 3 mm PAP 2.5/4/3AN PAP 2.5/4/3AN BL 1896300000 PDU 2.5/4 1049210000 PDU 2.5/4 BL PNT 2.5/4 PPE 2.5/4 dark beige blue 50 50 Width 3 mm PAP 2.5/4/4AN PAP 2.5/4/4AN BL 1896480000 PDU 2.5/4 3AN 1052300000 PDU 2.5/4 3AN BL PPE 2.5/4 3AN dark beige blue 50 50 Width 2.7 mm PAP PDU16S 1896320000 PDU 2.5/4 2x2 1052290000 PDU 2.5/4 4AN PDU 2.5/4 4AN BL PPE 2.5/4 4AN dark beige 10 1139910000 PDU 16S PPE 16S dark beige 20 1221360000 PMAK 4 dark beige 10 Width 3 mm PAP PDU6/10 PAP PDU6/10 BL 1896290000 PDU 16 PDU 16 BL PPE 16 dark beige blue 20 50 Width 3 mm PAP PDU6/10/3AN 1896330000 PDU 6/10 1049200000 PDU 6/10 BL PPE 6/10 PPE 6/10 3AN dark beige 20 Width 3 mm PAP PTR2.5/4 1896340000 PDU 6/10 3AN PDU 6/10 3AN BL dark beige 20 Width 3 mm PAP PTR2.5/4/3AN 1934680000 PTR2.5/4 PTR 2.5/4 O TNHE dark beige 20 Width 3 mm PAP PTR2.5/4/4AN 1934690000 PTR 2.5/4 3AN PTR 2.5/4 3AN O TNHE dark beige 20 Width 3 mm PAP PDK 2.5/4 1934700000 PTR 2.5/4 4AN PTR 2.5/4 4AN O TNHE dark beige 20 Width PAP PDL4 3 mm 1919720000 PDK 2.5/4 PDK 2.5/4 BL PDK 2.5/4 PE PDK 2.5/4L-PE PDK 2.5/4N-L PDK 2.5/4V PDK 2.5/4V BL dark beige 20 Width PAP PDL4S 3 mm 1883210000 PDL 4 L/L PDL 4 L/L/PE PDL 4 N/L/PE PDL 4 NT/L PDL 4 NT/L/PE PDL 4/TR/DU/PE PDL 4/TR/DU PDL 4/TR/DU O TNHE PDL 4/TR/DU/PE O TNHE dark beige 20 1837070000 PDL4 S/NT/L/PE PDL4 S/L/L PDL 4 S/L PDL4 S/N/L/PE PDL 4 S/N/L PDL 4 S/N PDL4 S/L/L/PE blue blue 20 20 1896390000 PNT 2.5/4 1916790000 blue blue 10 10 1896100000 PNT 6/10 1919710000 blue blue 10 10 1896380000 PNT 16 1919690000 dark beige black 20 20 1165320000 PSI 6/10 1165330000 PTL 6/10 PTD 6/10 Width 1 mm PAP PMAK 4 Width 3 mm PAP 16 Touch-safe protection With only a few exceptions, the last terminal in a terminal strip must be closed off with a PAP-type end plate. End plates must also be used within a terminal strip when it makes use of terminals of different sizes. This ensures the touchsafe requirement is met for live voltage components. The terminals have touch protection. Ensuring the operating voltage End plates can also be used to maintain the required clearance and creepage distances, in order to guarantee the rated voltage for the application. They can be used, for example, when cross-connections are used side-by-side. Contour matching The outer dimensions of the end plates match the external dimensions of the associated terminal. Mounting The end plate`s snap-in pegs allow it to be simply fitted on to the corresponding terminal. The corresponding indentations in the terminal are used to ensure that position follows the identical contours. Width 3 mm PHP PNT 2.5/4 PHP PNT 2.5/4 SO* Width 3 mm PHP PNT 6/10 PHP PNT 6/10 SO* Width 3 mm PHP PNT16 PHP PNT16 SO* Width 3 mm PAP PTL/PSI 6/10 PAP PTL/PSI 6/10 SW *) For a vertical installation position B.46 Order No. For terminal: 1282250000 - 2012/2013 Feeding with standard terminals Using standard terminals for the supply is ideal because the feed-through terminals of the P-Series exhibit a very wide clamping range. Left-hand feed Right-hand feed Feed options and cross-connections to be used Feed terminal Output terminal Cross-connection PDU 2.5/4 PDU 2.5/4 PDU 2.5/4/3AN PDU 2.5/4/4AN PTR 2.5/4 ZQV 2.5/... ZQV 2.5/... ZQV 2.5/... ZQV 2.5/... Left-hand feed * * * * PDU 2.5/4/3AN PDU 2.5/4 PDU 2.5/4/3AN PDU 2.5/4/4AN ZQV 2.5/... ZQV 2.5/... ZQV 2.5/... * * PDU 2.5/4/4AN PDU 2.5/4 PDU 2.5/4/3AN PDU 2.5/4/4AN ZQV 2.5/... ZQV 2.5/... ZQV 2.5/... * PTR 2.5/4 PDK 2.5/4 ZQV 2.5/... * PDU 6/10 PDU 2.5/4 PDU 2.5/4/4AN PDU 6/10 PDU 6/10/3AN PTR 2.5/4 ZQV 2.5/... ZQV 2.5/... ZQV 6N/... ZQV 6N/... ZQV 2.5/... * * * PDU 2.5/4 PDU 2.5/4/3AN PDU 6/10 PDU 6/10/3AN PTR 2.5/4 ZQV 2.5/... ZQV 2.5/... ZQV 6N/... ZQV 6N/... ZQV 2.5/... PDU 6/10/3AN Feed terminal PEI 16 Output possible on left and right A supply cable with a cross-section of up to 25 mm2 is possible with the PEI 16 feed terminal. Standard cross-connections are used to distribute the current to any number of terminals with a smaller crosssection. Output options and cross-connections to be used The table on the right shows a number of variations for distributing the current with the cross-connection specified. 1282250000 - 2012/2013 Feed terminal Output terminal Cross-connection PEI 16 PDU 2.5/4 PDU 2.5/4/3AN PDU 2.5/4/4AN PTR 2.5/4 PDU 6/10 PDU 6/10 3AN ZQV 2.5/... ZQV 2.5/... ZQV 2.5/... ZQV 2.5/... ZQV 6N... ZQV 6N... * * Left-hand feed * * * * * Right-hand feed * Terminals, P-Series Accessories - Electrical supply * * * * * B * * * * * * * Right-hand feed * * * * * * B.47 Accessories - Electrical distribution Terminals, P-Series Plug-in cross-connection ZQV Breaking out contact elements If one or more (max. 60 % for reasons of stability and temperature rise) of the contact elements are broken out of the cross-connections, terminals may be bypassed to suit the application. Fitting and changing cross-connections B The time-saving, easy-to-use cross-connection combs for terminals, featuring PUSH IN technology. The fitting and changing of cross-connections is a trouble-free and fast operation: - Insert the cross-connection into the crossconnection channel in the terminal... *ZQV 2.5 as 2- to 10-pole combs and * ZQV 6/N as 2- to 4-pole combs and * ZQV 16/2 as 2-pole comb (link) ... and press it fully home. (The cross-connection may not project from the channel.) These versions come with complete shock protection. However, please note that the rated voltage is reduced to 400 V when using cross-connections. This does not apply to terminals with a rated voltage below 400 V. Here the rated voltage of the used terminal is mandatory. - R emove a cross-connection by simply prising it out with a screwdriver. Shortening cross-connections Cross-connections can be shortened in length using a suitable cutting tool, e.g. KT ZQV (order no. 9002170000). However, three contact elements must always be retained. Caution: Contact elements must not be deformed! If the user shortens the cross-connections it is necessary to use end plates with the terminals in order to maintain the rated voltage of 250 V (at the bare, cut edges of the cross-connection). B.48 1282250000 - 2012/2013 Accessories - Electrical distribution Possible combinations single adjacent Terminals, P-Series In one cross-connection channel bridging B In two cross-connection channels parallel/bridging parallel lengthening / chain bridge Possible cross-connections of terminals of the same type with corresponding cross-connectors Terminal type Standard terminals PDU 2.5/4 PDU 2.5/4/3AN PDU 2.5/4/4AN PDU 6/10 PDU 6/10/3AN PDU 16 Cross-connection single adjacent bridging ZQV 2.5/... ZQV 2.5/... ZQV 2.5/... ZQV 6N/... ZQV 6N/... ZQV 16/2 * * * * * * * * * * * * * * * * * The ZQV 2.5/20 cross-connector allows you to easily and separately connect up to 20 terminals with each other. The electrician can cut off the required amount of contact elements from the continuous 20-pole cross-connection comb. Caution: ZQV with more than 10 poles are not fingersafe and not approved for ATEX use. Technical data Rated current Ordering data 1282250000 - 2012/2013 A 2-pole 3-pole 4-pole 5-pole 6-pole 7-pole 8-pole 9-pole 10-pole 20-pole ZQV 2.5 24 / 24 Type ZQV 2.5/2 ZQV 2.5/3 ZQV 2.5/4 ZQV 2.5/5 ZQV 2.5/6 ZQV 2.5/7 ZQV 2.5/8 ZQV 2.5/9 ZQV 2.5/10 ZQV 2.5/20 For terminal: PDL 4 ... PDL 4S ... PDU 2.5/4 ... PDIC 2.5/4 parallel bridging * * * * * ZQV 6 N Qty. 60 60 60 20 20 20 20 20 20 20 Order No. 1608860000 1608870000 1608880000 1608890000 1608900000 1608910000 1608920000 1608930000 1608940000 1908960000 57 Type ZQV 6N/2 ZQV 6N/3 ZQV 6N/4 ZQV 6N/20 For terminal: PDU 6/10 PDU 6/10 3AN PNT 6/10 chain bridge parallel/lengthening * * * * * * ZQV 16/2 Qty. 60 60 60 Order No. 1906210000 1906220000 1906230000 20 1906240000 76 / 76 Type ZQV 16/2 Qty. 25 Order No. 1739690000 For terminal: PDU 16 B.49 Terminals, P-Series Accessories - Testing / checking B Test adapter PTA Reducing sleeves PRH 2.5/4 The clip-on test adapter PTA is used as a single thin element and as a test adapter strip for voltage measurements in electrical cabinets. Conductors with cross-sections from 0.5 mm to 1.5 mm can be connected. The test adapter simply clips onto the terminal and thus guarantees reliable contact with the live busbar. With assembly peg The use of reducing sleeves simplifies the connection of conductors with smaller cross-sections. Conductors can be reliably inserted into the clamping point without the strands fraying. The use of a reducing sleeve centres the conductor in the entry point. Packaged in sets of 100 x 10-pole strips Reducing sleeves Dimensions Width / Length / Height Stripping length Rated data Rated voltage Rated current Rated cross-section Clamped conductors (H05V/H07V) solid / stranded flexible / flexible with ferrule Ordering data mm mm V A mm 250 17.5 1.5 mm mm 0.5...1.5 0.5...1.5 / 0.5...1.5 Type PTA PDU2.5/4 PTA ZA PDU2.5/4 For terminal: PDU 2.5/4 1-pole With snap-in pegs Technical data Product type Ordering data 5.1 / 20 / 59 6 For conductor 0.5 mm, grey For conductor 1 mm, dark grey Qty. 25 25 Terminal width, 5.1 mm Terminal width, 8 mm Terminal width, 12 mm B.50 Order No. 1916410000 1916400000 Qty. 100 100 100 100 Order No. 1805490000 1805520000 1805480000 1805530000 BZT 1/BZT 2 Label The BZT marking tags enable you to label the middle of the marking channel with the WS 10/5 tags. The marking tags can be put together with pins in order to achieve the greatest degree of stability. The VDE standards call for power connection terminals to be covered. For this purpose, Weidmuller can supply yellow warning PAD covers with the "lightning flash" symbol. The cover is clipped into the screwdriver slit in the terminal and each one covers a group of four terminals. Technical data Product type Ordering data Qty. 100 100 Order No. 1916180000 1916190000 PAD Cover Reducing sleeve Type PRH 2.5/4/1 PRH 2.5/4/2 For terminal: PDU 2.5/4 PDK 2.5/4 end plate and intermediate plate Type Qty. PAD 2.5/4/4 80 PAD 6/10/4 80 PAD 16/4 80 For terminal: PDU 2.5/4 ... PTR 2.5/4 ... PDK 2.5/4 ... PDU 6/10 ... PDU 16 ... Order No. 1916150000 1916160000 1916170000 Technical data Product type Ordering data One-sided, without peg One-sided, with peg Two-sided without pin Two-sided, with pin Marker holder Type BZT 1 WS 10/5 BZT 1 ZA WS 10/5 BZT 2 WS 10/5 BZT 2 ZA WS 10/5 For terminal: PDK 2.5/4 ... PDL 4 ... 1282250000 - 2012/2013 Accessories - Other functions Terminals, P-Series SIHA fuse holder For 5 x 20 G-fuse cartridges The SIHA fuse holder converts a simple terminal into a fuse terminal in next to no time. B 2. Press out old fuse. 1. Open fuse holder with fingers or screwdriver. Simply remove the disconnect lever and insert the fuse plug. Better: order the PDL 4... OTNHE and insert the SIHA immediately. * Simple handling without tools * Housing made of Wemid (V0) * Rated current 6.3 A *Even fits on 5 mm wide terminals when fitted in offset arrangement 3. Position new fuse. 4.Press fuse holder together again with fingers or screwdriver. SIHA 3 SIHA STRAP Qty. without LED SIHA3/G20 *Identification position for Dekafix 5 and space for the E-Fix self-adhesive label, size 8/20 400 V with LED (red) SIHA3/G20 10 - 36 V 35 - 70 V 60 - 150 V 140 - 250 V For test-disconnect terminals versions PTR 2.5/4... PDL 4 TR/... Order No. 1 7921560000 1 1 1 1 7921570000 7921580000 7921590000 7921600000 Applications with PTR 2.5/4..., PDL 4 TR/... and SIHA 3 PTR 2.5/4... PDL 4 TR/... und SIHA 3 1282250000 - 2012/2013 Single Group Single Group Qty. with strap SIHA STRAP 20 Order No. 9537680000 Connector for retro-fit assembly * Receptacle in the terminal is the identification position * Integrated identification position on the strap * Slots into fuse holder either on the left or on the right Short-circuit protection Nom. value Power loss Rated current 4.0 W 6.3 A 1.6 W 6.3 A 1.6 W 6.3 A 1.6 W 6.3 A Overload and short-circuit protection Nom. value Power loss Rated current 1.6 W 6.3 A 1.6 W 6.3 A B.51 Accessories - Other functions ZST 1 Terminals, P-Series Fuse carrier ZST 1 B Dimensions Width / Length / Height Ordering data Type ZST 1 mm 8 / 62 / 40 Qty. 25 Order No. 1269070000 The ZST 1 fuse-carrier can hold 6 device fuses (5 x 20 or 5 x 25 mm) which are available for use during servicing work. Component isolating plugs The Weidmuller philosophy is to realise a multitude of applications with just a few parts. The component and isolating plugs (BEST and TNST) represent a logical extension of this cost-effective and efficient approach. The component plug can accommodate electronic components and connect them to the terminal. And once an isolating plug is removed, the clamping point is obviously disconnected. The opening is easy to recognise. Component plug (up to 250 V) Ordering data Type BEST BEST/DRBR BEST/D For terminal type PTR 2.5/4... PDL 4 TR/... can be reversed An unintentional reconnection of the circuit is prevented by simply removing the isolating plug. The BEST and the TNST have the same pin arrangement. Both plugs are also identical with the SIHA 3 fuse holder, meaning that they can be used in all the "disconnecting products" of the W-, Z-, I- and P-Series. Fitted with... - wire jumper diode 1N4007 Qty. 25 25 25 Order No. 1833100000 1878570000 1878560000 Colour yellow Wemid Qty. 25 Order No. 1833090000 BEST Isolating plug Isolating plug B.52 Ordering data Type TNST For terminal type PTR 2.5/4... PDL 4 TR/... 1282250000 - 2012/2013 Accessories - Crimp Set Crimp-Set PZ 16 PUSH IN Terminals, P-Series Crimp-Set PZ 6 roto PUSH IN B Assembly Article description Crimping tools for wire end ferrules 0.14 to 6 mm2 Stripping tool for up to 6 mm2 Wire end ferrule with plastic collar, Colour grey Wire end ferrule with plastic collar, Colour orange Wire end ferrule with plastic collar, Colour white Wire end ferrule with plastic collar, Colour yellow Wire end ferrule with plastic collar, Colour black Wire end ferrule with plastic collar, Colour blue Wire end ferrule with plastic collar, Colour black Type PZ 6 Roto STRIPAX H 4.0/20 DS GR H0.5/16 OR H0.75/18 W H1.0/18 GE H1.5/18D SW H2.5/18D BL H6.0/20 SW Qty. 1 1 500 500 500 500 500 500 100 Technical data Type CRIMP-SET PZ 6 ROTO 1282250000 - 2012/2013 Article description Crimping tools for wire end ferrules 6 to 16 mm2 Stripping tool for up to 6 mm2 Wire end ferrule with plastic collar, Colour ivory Wire end ferrule with plastic collar, Colour black Wire end ferrule with plastic collar, Colour ivory Wire end ferrule with plastic collar, Colour green Type PZ 16 STRIPAX H 10.0/22 S EB H6.0/20 SW H10.0/22 EB H16.0/24 GN Qty. 1 1 100 100 100 100 Technical data Length x Width x Height Weight Ordering data Assembly 340/270/60 mm 1760 g Colour code PI Weidmuller Order No. 9028680000 Length x Width x Height Weight Ordering data Type CRIMP-SET PZ 16 340/270/60 mm 1725 g Colour code Weidmuller Order No. 9025850000 B.53 Accessories - Wire end ferrules with plastic collar ' / Weidmuller colour code packed loose B Weidmuller colour code in multi-pack bag B.54 6 6 Terminals, P-Series ' / * Polypropylene conical cable entry * Heat-resistant up to 105 C * Cable entry made from non-flammable material on request For conductors of size 0.14-150 mm2 (AWG 26-300MCM) Material: E-Cu, tin galvanised Dimensional tolerance acc. to DIN 46228 sect. 4 Ordering data Type H0.25/12 H0.34/12 H0.5/14 H0.5/16 H0.75/14 H0.75/16 H0.75/18 H1.0/14 H1.0/16 H1.0/18 H1.5/14 H1.5/16 H2.5/14D H2.5/18D H4.0/20 DS H6.0/20 H 10.0/22 S H16.0/24 o mm2 0.25 0.34 0.50 0.50 0.75 0.75 0.75 1.00 1.00 1.00 1.50 1.50 2.50 2.50 4.00 6.00 10.00 16.00 Ordering data Type H0.14/12 H0.25/12 H0.34/12 H0.5/14 H0.5/16 H0.75/14 H0.75/16 H0.75/18 H1.0/16 H1.0/18 H1.5/16 o mm2 0.14 0.25 0.34 0.50 0.50 0.75 0.75 0.75 1.00 1.00 1.50 AWG 24 22 20 20 18 18 18 17 17 17 16 16 14 14 12 10 7 6 L1 12.0 12.0 14.0 16.0 14.0 16.0 18.0 14.0 16.0 18.0 14.0 16.0 14.0 18.0 20.0 20.0 22.0 24.0 L2 8.0 8.0 8.0 10.0 8.0 10.0 12.0 8.0 10.0 12.0 8.0 10.0 8.0 12.0 12.0 12.0 12.0 12.0 D1 0.8 0.8 1.0 1.0 1.2 1.2 1.2 1.4 1.4 1.4 1.7 1.7 2.2 2.2 2.8 3.5 4.6 5.8 D2 1.8 2.0 2.6 2.6 2.8 2.8 2.8 3.0 3.0 3.0 3.5 3.5 4.2 4.2 4.8 6.3 7.1 8.8 S1 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.2 0.2 0.2 0.2 S2 Stripping length 0.25 10.0 0.25 10.0 0.25 10.0 0.25 12.0 0.25 10.0 0.25 12.0 0.25 14.0 0.25 10.0 0.25 12.0 0.25 15.0 0.25 10.0 0.25 12.0 0.25 10.0 0.25 14.0 0.3 15.0 0.3 14.0 0.4 14.0 0.4 15.0 Colour l light blue l turquoise l orange l orange m white m white m white l yellow l yellow l yellow l red l red l blue l blue l grey l black l ivory l green Qty. 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 100 100 100 Order No. 9025760000 9025770000 0690700000 9025870000 0462900000 9025860000 9025910000 0463000000 9025950000 9025930000 0463100000 0635100000 9019160000 9019170000 9203630000 0533500000 9203620000 0565900000 AWG 26 24 22 20 20 18 18 18 17 17 16 L1 12.0 12.0 12.0 14.0 16.0 14.0 16.0 18.0 16.0 18.0 16.0 L2 8.0 8.0 8.0 8.0 10.0 8.0 10.0 12.0 10.0 12.0 10.0 D1 0.6 0.8 0.8 1.0 1.0 1.2 1.2 1.2 1.4 1.4 1.7 D2 1.5 1.8 2.0 2.6 2.6 2.8 2.8 2.8 3.0 3.0 3.5 S1 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 S2 Stripping length 0.25 10.0 0.25 10.0 0.25 10.0 0.25 10.0 0.25 12.0 0.25 10.0 0.25 12.0 0.25 14.0 0.25 12.0 0.25 15.0 0.25 12.0 Colour l grey light blue l turquoise l orange l orange m white m white m white l yellow l yellow l red Qty. 500 500 500 500 500 500 500 500 500 500 500 Order No. 9028240000 9025780000 9025790000 9026060000 9028270000 9026070000 9028290000 9028300000 9028320000 9028340000 9028350000 1282250000 - 2012/2013 Accessories - Twin-wire end ferrules with plastic collar / $ ' 6 6 Weidmuller colour code packed loose Type PDU, PPE, PDK, PTR For conductors each at 2 x 0.5 - 2 x 16 mm2 (2 x AWG 20 - 2 x AWG 6) Material: E-Cu, tin galvanised Dimensional tolerance acc. to DIN 46228 sect. 4 Ordering data Type H0.5/15 H0.5/16.5 H0.5/18.5 *H0.75/15 *H0.75/17 *H0.75/19S *H0.75/24.5 *H1.0/25.6 *H1.5/25.6 **H2.5/26.5D o mm2 0.50 0.50 0.50 0.75 0.75 0.75 0.75 1.00 1.50 2.50 Note: * Voltage reduced to 320 V Weidmuller colour code packed loose Type PDL DU/PE Hook-type cable connector according to ESI 50-18 part 2 / Terminals, P-Series * EPolypropylene conical cable entry * Heat-resistant up to 105 C * Cable entry made from non-flammable material on request / % Ordering data Type H0.5/15 H0.5/16.5 H0.5/18.5 H0.75/15 H0.75/17 H0.75/19S H0.75/24.5 H1.0/25.6 H1.5/25.6 H2.5/26.5D o mm2 0.50 0.50 0.50 0.75 0.75 0.75 0.75 1.00 1.50 2.50 Ordering data Type HB 1-17 HB 1-13 AWG 20 20 20 18 18 18 18 17 16 14 L1 15.0 16.0 19.0 15.0 17.0 19.0 24.0 25.0 26.0 27.0 L2 8.0 10.0 12.0 8.0 10.0 12.0 18.0 18.0 18.0 18.0 D1 1.4 1.4 1.4 1.7 1.7 1.4 1.7 2.0 2.2 2.8 D2 D1 1.4 1.4 1.4 1.7 1.7 1.4 1.7 2.0 2.2 2.8 D2 S1 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 S2 Stripping length 0.3 11.0 0.3 13.0 0.3 15.0 0.3 11.0 0.3 13.0 0.3 21.0 0.3 21.0 0.3 22.0 0.3 21.0 0.4 21.0 Colour l orange l orange l orange m white m white m white m white l yellow l red l blue Qty. 500 500 500 500 500 500 500 500 100 100 Order No. 9037200000 9037210000 9037220000 9037230000 9037240000 9202820000 9037250000 9037280000 9037310000 9037520000 S1 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 S2 Stripping length 0.3 11.0 0.3 13.0 0.3 15.0 0.3 11.0 0.3 13.0 0.3 21.0 0.3 21.0 0.3 22.0 0.3 21.0 0.4 21.0 Colour l orange l orange l orange m white m white m white m white l yellow l red l blue Qty. 500 500 500 500 500 500 500 500 100 100 Order No. 9037200000 9037210000 9037220000 9037230000 9037240000 9202820000 9037250000 9037280000 9037310000 9037520000 Qty. 100 100 Order No. 9036290000 9036300000 B ** Voltage reduced to 160 V AWG 20 20 20 18 18 18 18 17 16 14 L1 15.0 16.0 19.0 15.0 17.0 19.0 24.0 25.0 26.0 27.0 L2 8.0 10.0 12.0 8.0 10.0 12.0 18.0 18.0 18.0 18.0 o mm2 0.25 - 1.5 1.0 - 2.5 Colour l l L1 27.2 27.2 L2 16.75 16.75 L3 4.6 3.0 % / 1282250000 - 2012/2013 B.55 Terminals, P-Series B B.56 1282250000 - 2012/2013