23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579-4875 or (310) 534-1505 Fax: (310) 534-1424 E-mail: webmaster@ledtronics.com Website: http://www.ledtronics.com L200CWPB3KB-30D Super Blue 5mm, Flanged Cylindrical, 8.6mm Height 25 viewing angle DWG BY: LL / GP 10-20-06 CHK BY: PL 08-06-07 QA: __ __-__-__ MFG: __ __-__-__ REVISION LTR: 08-06-07 Part No. L200CWPB3KB-30D DWG NO. DSDC0500 Page 1 of 4 23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579-4875 or (310) 534-1505 Fax: (310) 534-1424 E-mail: webmaster@ledtronics.com Website: http://www.ledtronics.com Features: High intensity Standard 5mm diameter package General purpose leads Pb-free Package Dimensions: Part NO. Chip Material Lens Color Emission Color L200CWPB3KB-30D InGaN Water Clear Super Bright Blue Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25mm (.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm (.04") max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. 6. Precautions for ESD: Static electricity and surge can damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. Part No. L200CWPB3KB-30D DWG NO. DSDC0500 Page 2 of 4 23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579-4875 or (310) 534-1505 Fax: (310) 534-1424 E-mail: webmaster@ledtronics.com Website: http://www.ledtronics.com Absolute Maximum Ratings at Ta=25C Parameter MAX. Unit Power Dissipation 80 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 100 mA Continuous Forward Current 20 mA Derating Linear From 50C 0.4 mA/C Reverse Voltage 5 V Electrostatic Discharge (ESD) 150 V Operating Temperature Range -30C to +80C Storage Temperature Range -40C to +100C 260C for 5 Seconds Lead Soldering Temperature[4mm(.157") From Body] Electrical Optical Characteristics at Ta=25C Parameter Symbol Min. Typ. Max. Unit Test Condition IV 1200 3000 --- mcd IF=20mA (Note 1) Viewing Angle 2 1/2 --- 25 --- Deg (Note 2) Peak Emission Wavelength p --- 463 --- nm IF=20mA Dominant Wavelength d --- 468 --- nm IF=20mA (Note 3) Spectral Line Half-Width - --- 23 --- nm IF=20mA Forward Voltage VF --- 3.2 4.0 V IF=20mA Reverse Current IR --- --- 50 A VR=5V SCP --- --- 0.06 --- cd IF=20mA Lumens --- --- 0.75 --- lm IF=20mA Radiant Intensity Ie --- 42 --- mW/sr IF=20mA Luminous Intensity Chromaticity Coordinates x: ~0.13 y: ~0.05 IF =20mA Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength (d) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. Forward voltage measurement allowance is: 0.1V 5. Luminous Intensity Measurement Allowance is 10% Part No. L200CWPB3KB-30D DWG NO. DSDC0500 Page 3 of 4 23105 Kashiwa Court, Torrance, CA 90505 Phone: (800) 579-4875 or (310) 534-1505 Fax: (310) 534-1424 E-mail: webmaster@ledtronics.com Website: http://www.ledtronics.com Typical Electrical / Optical Characteristics Curves (25C Ambient Temperature Unless Otherwise Noted) Spectral Radiance ( Peak @ 465 nm) Normaliz ed Response 1.0 0.8 0.6 0.4 0.2 0.0 380 400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 720 740 760 780 Wave Leagth( nm) Forwa rd C urre nt vs Forwa rd Volta ge F orward Current IF ( mA) 35 30 25 20 15 10 5 0 2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9 30 35 Forw ard V oltage V F( V ) Relative Luminous Intensity vs Forward Current 3 Relative Intensity (LOP@20mA=1) 2.5 2 1.5 1 0.5 0 0 5 10 15 20 25 Forward Current IF(mA) Beam Pattern Forw ard Cureent Derating Curv e 0X -30X 30X 60X -60X -90X 1.0 0.8 0.6 0.4 0.2 0.2 0.4 0.6 0.8 1.0 Relative Intensity (LOP@MAX=1) Part No. L200CWPB3KB-30D 90X Forward Current IF(mA) 60 50 40 30 20 10 0 0 DWG NO. 10 20 30 40 50 60 DSDC0500 70 80 90Ta(C) Page 4 of 4