SMP1340-079LF - Skyworks Solutions

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200051D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 2, 2009 1

DATA SHEET

SMP1340 Series: Fast Switching Speed, Low Capacitance,

Plastic Packaged PIN Diodes

Applications

xFast speed wireless switch applications

Features

xResistance: 1.0 Ω @ 10 mA

xCapacitance: 0.3 pF

xPackages rated MSL1, 260 qC per JEDEC J-STD-020

Skyworks offers lead (Pb)-free, RoHS (Restriction of

Hazardous Substances) compliant packaging.

Description

The SMP1340 series of plastic packaged, surface mountable PIN

diodes is designed for high volume switch applications from

10 MHz to more than 2 GHz. The short carrier lifetime of 100 ns

(typical), combined with their thin I-region width of 7 μm

(nominal) results in a group of fast speed RF switching PIN diodes.

The RF performance of the SMP1340 series is assured by virtue

of their low capacitance (0.3 pF) and low resistance (1.0 Ω at

10 mA). The SMP1340-508 has been specifically designed for

WLAN 802.11 a/b/g applications.

Table 1 describes the various packages and marking of the

SMP1340 series.

DATA SHEET • SMP1340 SERIES DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

2 September 2, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200051D

Table 1. SMP1340 Series Packaging and Marking

Common Anode Common Cathode Series Pair Single Common Cathode Single Anti-Parallel Low Inductance

SOT-23 SOT-23 SOT-23 SOD-323 SC-70 SC-79 LGA SOT-23

SMP1340-003

Marking: PS9

♦SMP1340-004

Marking: PS3

SMP1340-005

Marking: PS2

SMP1340-074

Marking: PS3

SMP1340-508

Marking: X

Pb-free

SMP1340-007LF

Marking: RSB

SMP1340-003LF

Marking: RS9

♦SMP1340-004LF

Marking: RS3

SMP1340-005LF

Marking: RS2

SMP1340-011LF

Marking: RS

SMP1340-074LF

Marking: RS3

♦SMP1340-079LF

LS = 1.5 nH LS = 1.5 nH LS = 1.5 nH LS = 1.5 nH LS = 1.4 nH LS = 0.7 nH LS = 0.6 nH LS = 0.4 nH

SC-70 SC-70

SMP1340-075LF

Marking: RS2

S = 1.4 nH

LF denotes lead (Pb)-free, RoHS-compliant packaging option as an alternative to the standard Skyworks tin/lead (Sn/Pb) packaging.

Innovation to Go™

Select Linear Products (indicated by ♦) now available for purchase online.

Table 2. SMP1340 Series Absolute Maximum Ratings

Parameter Symbol Minimum Maximum Units

Reverse voltage VR 50 V

Power dissipation @ 25 °C lead temperature PD 250 mW

Storage temperature TSTG –65 +150 qC

Operating temperature TA –65 +150 qC

Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other

parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.

CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device

must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body

or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. The

SMP1340 series PIN diodes are Class 1B ESD devices.

Electrical and Mechanical Specifications

The absolute maximum ratings of the SMP1340 series are

provided in Table 2. Electrical specifications are provided in

Table 3. Resistance versus temperature measurements are

provided in Table 4.

Typical performance characteristics of the SMP1340 series are

illustrated in Figures 1 to 4. Package dimensions are shown in

Figures 5 to 9.

Package and Handling Information

Instructions on the shipping container label regarding exposure to

moisture after the container seal is broken must be followed.

Otherwise, problems related to moisture absorption may occur

when the part is subjected to high temperature during solder

assembly.

The SMP1340 series is rated to Moisture Sensitivity Level 1

(MSL1) at 260 qC. It can be used for lead or lead-free soldering.

For additional information, refer to the Skyworks Application Note,

Solder Reflow Information, document number 200164

Care must be taken when attaching this product, whether it is

done manually or in a production solder reflow environment.

Production quantities of this product are shipped in a standard

tape and reel format. For packaging details, refer to the Skyworks

Application Note Discrete Devices and IC Switch/Attenuators Tape

and Reel Package Orientation, document number 200083.

DATA SHEET • SMP1340 SERIES DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200051D • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • September 2, 2009 3

Table 3. SMP1340 Series Electrical Specifications (Note 1)

(TA = +25 qC, Unless Otherwise Noted)

Parameter Symbol Test Condition Min Typical Max Units

Reverse current IR V

R = 50 V 10 μA

Capacitance CT F = 1 MHz, V = 5 V 0.21 0.30 pF

Resistance RS F = 100 MHz

I = 1 mA

I = 5 mA

I = 10 mA

1.7

1.0

0.85

2.0

1.2

Forward voltage VF I

F = 10 mA 0.85 V

Carrier lifetime TI IF = 10 mA 100 ns

I region width 7 μm

Note 1: Performance is guaranteed only under the conditions listed in this Table and is not guaranteed over the full operating or storage temperature ranges. Operation at elevated

temperatures may reduce reliability of the device.

Table 4. Resistance vs Temperature @ 500 MHz

(mA)

RS @ –55

(

Ω)

RS @ –40

(

Ω)

RS @ –15

(

Ω)

RS @ +25

(

Ω)

RS @ +65

(

Ω)

RS @ +85

(

Ω)

RS @ +100

(

Ω)

0.02 9.92 9.68 9.30 8.95 8.95 9.01 9.12

0.10 3.90 3.86 3.79 3.80 3.85 3.94 4.03

0.30 2.32 2.33 2.30 2.33 2.35 2.43 2.49

0.50 1.91 1.93 1.90 1.92 1.92 1.99 2.05

1.0 1.54 1.55 1.52 1.53 1.50 1.56 1.61

10 0.95 0.96 0.91 0.90 0.82 0.85 0.89

20 0.86 0.87 0.82 0.81 0.73 0.75 0.79

100 0.72 0.73 0.70 0.68 0.59 0.62 0.65

DATA SHEET • SMP1340 SERIES DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

4 September 2, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200051D

Typical Performance Characteristics

0.01 0.1 1 10 100

Forward Current (mA)

Series Resistance (Ω)

0.1

100

Figure 1. Series Resistance vs Current @ 100 MHz

0.10

0.20

0.15

0.25

0.30

Reverse Voltage (V)

Capacitance (pF)

0 5 10 15 25 3520 30 40

1 MHz to 1 GHz

Figure 3. Capacitance vs Reverse Voltage

0.6 0.7 0.8 0.9 1.0

0.01

0.1

100

Forward Voltage (mV)

Forward Current (mA)

Figure 2. DC Characteristics

0 500 1000 1500 2000

Frequency (MHz)

Conductance (μS)

0 V

40 V

10 V

–50

+50

+100

+150

+200

+250

+350

+300

Figure 4. Conductance vs Frequency and Reverse Voltage

DATA SHEET • SMP1340 SERIES DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200051D • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • September 2, 2009 5

Pin 2

Pin 1

Pin 3

Pin 1

Pin 3

Pin 4

(1.03)

(0.73)

(0.30)

(0.00)

Pin 2

0.058 (1.47 mm)

0.054 (1.39 mm)

0.028 (0.70 mm)

0.023 (0.58 mm)

Side ViewTop View

0.048 (1.23 mm)

0.044 (1.13 mm)

(0.138 x 45)

(1.27)

(0.87)

(0.40)

(0.00)

Bottom View

(0.076) All Around

S1659

Dimensions are in inches (millimeters shown in parentheses)

Figure 5. LGA Package Dimension Drawing

0.031 (0.80 mm) Min.

0.039 (1.00 mm) Max.

0.000 (0.00 mm) Min.

0.004 (0.10 mm) Max.

0.010 (0.25 mm) Min.

0.016 (0.40 mm) Max.

0.071 (1.80 mm) Min.

0.087 (2.20 mm) Max.

0.071 (1.80 mm) Min.

0.094 (2.40 mm) Max.

0.045 (1.15 mm) Min.

0.053 (1.35 mm) Max.

0.026 (0.65 mm) Ref.

0.051 (1.30 mm) Ref.

0.004 (0.10 mm) Min.

0.007 (0.18 mm) Max.

0.004 (0.10 mm) Min.

0.012 (0.30 mm) Max.

0.014 (0.35 mm) Ref.

S1653Dimensions are in inches (millimeters shown in parentheses)

Figure 6. SC-70 Package Dimension Drawing

DATA SHEET • SMP1340 SERIES DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

6 September 2, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200051D

0.060 (1.50 mm) Min.

0.067 (1.70 mm) Max.

0.010

(0.25 mm) Min.

0.014

(0.35 mm) Max.

0.043 (1.10 mm) Min.

0.051 (1.30 mm) Max.

0.020

(0.50 mm) Min.

0.028

(0.70 mm) Max.

0.003

(0.07 mm) Min.

0.008

(0.20 mm) Max.

10° Max.

0.028

(0.70 mm) Min.

0.035

(0.90 mm) Max.

0.006 (0.15 mm) Min.

Cathode

Indicator

S1652Dimensions are in inches (millimeters shown in parentheses)

Figure 7. SC-79 Package Dimension Drawing

0.090 (2.30 mm) Min.

0.108 (2.74 mm) Max.

0.045

(1.15 mm) Min.

0.053

(1.35 mm) Max.

0.010

(0.25 mm) Min.

0.016

(0.40 mm) Max.

Cathode

Indicator

0.050

(1.25 mm) Max.

0.006

(0.15 mm) Typ.

0.008

(0.20 mm) Nom.

0.008

(0.20 mm) Nom.

0.008

(0.20 mm) Nom.

0.063 (1.60 mm) Min.

0.071 (1.80 mm) Max.

S1619

Dimensions are in inches (millimeters shown in parentheses)

Figure 8. SOD-323 Package Dimension Drawing

DATA SHEET • SMP1340 SERIES DIODES

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200051D • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • September 2, 2009 7

0.035 (0.89 mm) Min.

0.044 (1.12 mm) Max.

0.0005 (0.01 mm) Min.

0.004 (0.10 mm) Max.

0.012 (0.30 mm) Min.

0.020 (0.50 mm) Max.

0.003 (0.080 mm) Min.

0.008 (0.20 mm) Max.

8° Max.

0.022 (0.55 mm) Ref.

0.110 (2.80 mm) Min.

0.120 (3.04 mm) Max.

0.083 (2.10 mm) Min.

0.104 (2.64 mm) Max.

0.037 (0.95 mm) Ref.

0.047 (1.20 mm) Min.

0.055 (1.40 mm) Max.

0.076 (1.92 mm) Ref.

0.020 (0.51 mm) Ref.

S1389

Dimensions are in inches (millimeters shown in parentheses)

Figure 9. SOT-23 Package Dimension Drawing

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by

Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions

of Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any

damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.

Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands

and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,

are incorporated by reference.