Data sheet Function Generators Specifications Models 4017A & 4040A 4017A 4040A Frequency Characteristics Sine, Square, Triangle, Pulse, Ramp Waveforms Range 0.1 Hz to 10 MHz in 8 ranges 0.2 Hz to 20 MHz in 8 ranges Resolution 5 digits 5 digits Tuning Range 10:1 10:1 Fine 5% of coarse setting 5% of coarse setting Variable Duty Cycle 15:85:15 cont variable 15:85:15 cont variable Operating Modes Normal, sweep, VCG Normal,sweep, VCG, AM, FM,burst Output Characteristics Model 4040A These analog function generators offer familiar controls, stable output, and reliable operation at budget-saving price points. Impedance 50 10% Level 20 V p-p Open circuit, 10V p-p into 50 Amplitude Variable, 20 dB range typical Attenuation -20 dB 1dB DC Offset Preset 0.1 V typ Variable: 10V open-circuit 5 into 50 Sine Wave Flatness 4017A 10 MHz Sweep Function Generator 4040A 20 MHz Sweep Function Generator 0.1 Hz to 10 MHz Sine, Square, Triangle, Pulse, & Ramp output Coarse and Fine tuning 5 digit LED display Linear and log sweep Variable duty cycle Variable DC offset cUL certified 0.2 Hz to 20 MHz Sine, Square, Triangle, Pulse, & Ramp output Coarse and Fine tuning AM & FM modulation Burst operation External frequency counter to 30 MHz Linear and log sweep Variable duty cycle Variable DC offset cUL certified Model 4040A AM Modulation Characteristics Source Internal, External Modulation Ratio 0 to 100% Int modulation 1 kHz Ext Modulation DC to 500 kHz Ext Sensitivity Less than 10V p-p for 100% modulation External Level Burst Frequency TTL levels Determined by main generator frequency setting Technical data subject to change (c) B&K Precision Corp. 2014 v050114 5% (.45 dB) 10 Hz to 8 MHz 20% (2.0 dB) 8 MHz to 20 MHz 0.1 Hz to 100 kHz <2% 0.2 Hz to 100 kHz <2% Square wave Symmetry Rise time 30 ns Triangle Wave Linearity: 98% to 100 kHz TTL Output Level 0.8V to 2.4V Rise time 20 nS Duty Cycle 50% typical CMOS Output Max. Frequency 2 MHz Level 4V to 14V 0.5 p-p cont. variable Rise Time 120 nS VCG (Voltage controlled generator) Input Voltage 0-10V 1V causes a 100:1 frequency change Impedance 10k 5% Sweep Operation Mode LIN/LOG Width 100:1 continuously variable Rate 0.5 s to 30 s cont variable Sweep Output 0 to 10 V 0 to 2 V Start/Stop Frequencies NA Adjustable 20 ms to 2 s cont variable Accuracy Time base accuracy 1 count Time Base Accuracy 10 ppm (23 5C) Display Mode 5 digit LED NA INT or EXT External Input Frequency Does not apply 5 Hz to 30 MHz Resolution Does not apply 0.1, 1, 10, 100, 1 kHz Sensitivity Does not apply 25 mVrms General Burst Characteristic Source Internal, External Burst Width Cont. variable from 5% to 90% of internal gating frequency 0.5 Hz to 50 Hz, internal DC to 500 kHz external 5% (.45 dB) 0.1 Hz to 8 MHz 20% (2.0 dB) 8 MHz to 10 MHz Frequency Counter FM Modulation Characteristics Source Internal, External Modulation Ratio 0 to 100% Deviation 0 to 5% INT Modulation 1 kHz Ext Modulation DC to 500 kHz Ext Sensitivity Less than 10V p-p for 100% modulation Repition Rate 3% typical at 1 kHz Distortion AC Input 120/230 VAC 10%, 50/60 Hz, internal jumper selectable Dimensions 4.5 x 11.75 x 10.575" (140 x 298 x 264mm) Weight 4 lbs. (1.8 kg) 5.5 x 11.75 x 10.575" (114 x 298 x 264mm) 4.5 lbs. (2 kg) Two-Year Warranty Included Accessories w w w.bk prec ision.c om Tel.: 714.921.9095 Output Cable with BNC to Alligator Clips, Instruction Manual Carrying Case (not included): LC-40