Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST FEATURES * Polarized aluminium electrolytic capacitors, non-solid handbook, 4 columns * Large types, cylindrical aluminium case, insulated with a blue sleeve * Also available in bolt version (PED-STB) * Pressure relief in the sealing * Charge and discharge proof * Extremely low ESR and ESL allowing very high ripple current load, achieved by a special construction with multiple internal anode and cathode connections MBC432 - 1 ST * Very long useful life: 20000 hours at 85 C STB Fig.1 Component outlines. * High resistance to shock and vibration achieved by longitudinal rills and special internal construction. 086/087 PS-ST larger case sizes APPLICATIONS * Computer, telecommunications and industrial systems smaller CV-values in DIN PW handbook, 4 columns 050/052 PEC-PW 114/115 PED-ST higher CV/volume 154/155 PEC-ST CCB028 * Smoothing and filtering larger case sizes high ripple 105 C * Standard and switched mode power supplies 088/089 PHC-ST * Energy storage in pulse systems. QUICK REFERENCE DATA VALUE DESCRIPTION 114 Case size (Dnom x Lnom in mm) 115 35 x 60 to 75 x 105 150 to 220000 F Rated capacitance range (E6 series), CR -10 to +30% Tolerance on CR Rated voltage range, UR 10 to 100 V 250 to 400 V -40 to +85 C Category temperature range Endurance test at 85 C 8000 hours (400 V: 2000 hours) Useful life at 85 C 20000 hours (400 V: 5000 hours) Useful life at 40 C, 1.4 x IR applied 350000 hours (400 V: 90000 hours) Shelf life at 0 V, 85 C 500 hours Based on sectional specification IEC 384-4/CECC 30300 Climatic category IEC 68 1998 Mar 16 40/085/56 1 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST Selection chart for CR, UR and relevant nominal case sizes (D x L in mm) for 114 series Preferred types in bold. CR (F) UR (V) 10 16 25 40 63 100 1000 - - - - - 35 x 60 1500 - - - - - 35 x 60 2200 - - - - 35 x 60 35 x 80 3300 - - - 35 x 60 35 x 60 35 x 105 4700 - - 35 x 60 35 x 60 35 x 80 50 x 80 6800 - - 35 x 60 35 x 80 35 x 105 50 x 105 10000 - 35 x 60 35 x 80 35 x 105 50 x 80 65 x 105 15000 35 x 60 35 x 80 35 x 105 50 x 80 50 x 105 65 x 105 22000 35 x 80 35 x 105 50 x 80 50 x 105 65 x 105 75 x 105 33000 35 x 105 50 x 80 50 x 105 65 x 105 65 x 105 - 47000 50 x 80 50 x 105 65 x 105 65 x 105 75 x 105 - 68000 50 x 105 65 x 105 65 x 105 75 x 105 - - 100000 65 x 105 65 x 105 75 x 105 - - - 150000 65 x 105 75 x 105 - - - - 220000 75 x 105 - - - - - Selection chart for CR, UR and relevant nominal case sizes (D x L in mm) for 115 series Preferred types in bold. CR (F) UR (V) 250 350 385 400 150 - - 35 x 60 35 x 60 220 - 35 x 60 35 x 80 35 x 80 330 35 x 60 35 x 80 35 x 105 35 x 105 470 35 x 80 35 x 105 50 x 80 50 x 80 35 x 105 50 x 80 50 x 105 50 x 105 1000 50 x 80 50 x 105 65 x 105 65 x 105 1500 50 x 105 65 x 105 65 x 105 65 x 105 2200 65 x 105 65 x 105 75 x 105 75 x 105 3300 65 x 105 75 x 105 4700 75 x 105 680 1998 Mar 16 - 2 - - - - Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST MECHANICAL DATA AND PACKAGING QUANTITIES A 5.3 L handbook, full pagewidth 0.7 11 0.2 D P d2 M5 d1 MGB303 - 2 9 0.5 Dimensions in mm. For dimensions see Table 1. Maximum permissible torque which may be applied to the termination screws: 2 Nm. For accessories refer to this handbook, Section "Mounting Accessories". The capacitors are delivered with screws and washers. Fig.2 Screw terminal (ST); screw terminal bolt (STB). Table 1 Physical dimensions, mass and packaging information; see Fig.2 NOMINAL CASE SIZE D x L (mm) d2 x l MASS (g) PACKAGING QUANTITIES (per box) CARDBOARD BOX DIMENSIONS lxwxh (mm) 8.0 M8 x 12 55 25 196 x 192 x 110 8.4 8.0 M8 x 12 80 25 196 x 192 x 115 13.0 8.4 8.0 M8 x 12 110 25 196 x 192 x 140 22.0 14.3 8.0 M12 x 16 160 25 293 x 273 x 115 108 22.0 14.3 8.0 M12 x 16 210 25 293 x 273 x 140 66.5 108 28.5 19.0 9.6 M12 x 16 370 10 368 x 151 x 140 76.5 108 32.0 21.0 9.6 M12 x 16 535 10 418 x 173 x 140 Dmax (mm) Lmax (mm) P 0.1 (mm) A (mm) d1 0.2 (mm) 35 x 60 36.5 63 13.0 8.4 35 x 80 36.5 83 13.0 35 x 105 36.5 108 50 x 80 51.5 83 50 x 105 51.5 65 x 105 75 x 105 MARKING The capacitors are marked (where possible) with the following information: * Rated capacitance (in F) * Tolerance code on rated capacitance (M for 20%) * Rated voltage (in V) * Climatic category in accordance with "IEC 68" * Date code (year and week) in accordance with "IEC 62" * Code for factory of origin * Name of manufacturer * Code number (last 8 digits) * Code for basic specification in accordance with "IEC 384-4-1" and "CECC 30301". 1998 Mar 16 3 Nominal case size: 35 x 80 mm; ST version rated capacitance at 100 Hz, tolerance -10 to +30% IR rated RMS ripple current at 100 Hz, 85 C and 20 kHz, 70 C IL1 max. leakage current after 1 minute at UR IL5 max. leakage current after 5 minutes at UR ESR typical equivalent series resistance at 100 Hz Z impedance at 20 kHz Tan max. dissipation factor at 100 Hz UR (V) 4 10 16 10000 F/25 V; -10/+30% DESCRIPTION CR Table 2 Electrolytic capacitor 114 series Catalogue number: 2222 114 16103. Electrical data and ordering information for the 114 series; preferred types in bold CR 100 Hz (F) NOMINAL CASE SIZE D x L (mm) IR 100 Hz 85 C (A) IR 20 kHz 70 C (A) IL1 1 min (mA) IL5 5 min (mA) ESR TYP. 100 Hz (m) Tan MAX. 100 Hz Z TYP. 20 kHz (m) 13 Z MAX. 20 kHz (m) CATALOGUE NUMBER (see Table 3, note 1) 2222 ... ..... 15000 35 x 60 6 11.4 0.90 0.30 20 0.32 20 114 14153 22000 35 x 80 7.5 14.2 1.32 0.43 14 0.33 9.5 14 114 14223 33000 35 x 105 10 19 1.98 0.66 10 0.35 7.5 10 114 14333 47000 50 x 80 14 26.5 2.82 0.94 7.5 0.36 5.0 9.5 114 14473 68000 50 x 105 18 34 4.08 1.36 5.5 0.38 4.0 8.0 114 14683 100000 65 x 105 30 50 6.00 2.00 3.5 0.34 3.0 5.0 114 14104 150000 65 x 105 30 50 9.00 3.00 3.0 0.45 3.0 5.0 114 14154 220000 75 x 105 37 50 13.20 4.40 2.0 0.45 2.5 4.0 114 14224 10000 35 x 60 6 11.4 0.96 0.32 22 0.22 15000 35 x 80 7.5 14.2 1.44 0.40 15 0.23 9.5 14 114 15153 22000 35 x 105 10 19 2.12 0.71 11 0.25 7.0 10 114 15223 33000 50 x 80 13 24.6 3.17 1.06 7.5 0.26 5.0 9.5 114 15333 13 20 Philips Components SYMBOL Ordering example Aluminium electrolytic capacitors Power Eurodin Screw Terminals 1998 Mar 16 ELECTRICAL DATA AND ORDERING INFORMATION Unless otherwise specified, all electrical values in Tables 2 and 3 apply at Tamb = 20 C, P = 86 to 106 kPa, RH = 45 to 75%. 114 15103 18 34 4.52 1.51 5.5 0.27 4.0 8.0 114 15473 28 50 6.53 2.18 3.5 0.24 3.0 5.0 114 15683 100000 65 x 105 28 50 9.60 3.20 3.0 0.31 3.0 5.0 114 15104 150000 75 x 105 37 50 14.40 4.80 2.0 0.31 2.5 4.0 114 15154 Product specification 50 x 105 65 x 105 114/115 PED-ST 47000 68000 25 4700 35 x 60 5.2 40 5 63 IR 20 kHz 70 C (A) IL1 1 min (mA) IL5 5 min (mA) 10 0.71 0.24 ESR TYP. 100 Hz (m) Tan MAX. 100 Hz Z TYP. 20 kHz (m) Z MAX. 20 kHz (m) CATALOGUE NUMBER (see Table 3, note 1) 2222 ... ..... 30 0.14 15 23 114 16472 6800 35 x 60 5.2 10 1.02 0.34 25 0.18 14 21 114 16682 10000 35 x 80 6.7 12.7 1.50 0.50 18 0.18 10 15 114 16103 15000 35 x 105 9.7 18.4 2.25 0.75 12 0.19 7.5 11 114 16153 22000 50 x 80 12.5 23.7 3.30 1.10 8.5 0.19 5.5 9.5 114 16223 33000 50 x 105 18 34 4.95 1.65 6.0 0.21 4.0 8.0 114 16333 47000 65 x 105 27 50 7.05 2.35 4.0 0.18 3.0 5.0 114 16473 68000 65 x 105 27 50 10.20 3.40 3.5 0.23 3.0 5.0 114 16683 100000 75 x 105 37 50 15.00 5.0 2.5 0.23 2.5 4.0 114 16104 8.5 0.80 0.27 37 0.13 21 32 114 17332 3300 35 x 60 4.5 4700 35 x 60 4.5 8.5 1.13 0.38 35 0.17 22 33 114 17472 6800 35 x 80 6 11.4 1.64 0.55 25 0.17 15 23 114 17682 10000 35 x 105 7.5 14.2 2.40 0.80 17 0.18 11 17 114 17103 15000 50 x 80 19 3.60 1.20 11 0.17 7.5 13 114 17153 10 22000 50 x 105 15 28.5 5.28 1.76 8.0 0.18 5.5 10.5 114 17223 33000 65 x 105 21 40 7.92 2.64 5.0 0.16 3.5 6.0 114 17333 47000 65 x 105 22 42 11.28 3.76 4.5 0.21 3.5 6.0 114 17473 68000 75 x 105 30 50 16.32 5.44 2200 35 x 60 3.7 7 0.84 0.28 39 0.09 22 33 114 18222 3300 35 x 60 3.7 7 1.25 0.42 32 0.11 20 30 114 18332 4700 35 x 80 5.2 10 1.78 0.66 23 0.11 14 21 114 18472 6800 35 x 105 7.5 14.2 2.57 0.86 17 0.11 10 15 114 18682 10000 50 x 80 9.5 18 3.78 1.26 12 0.12 7.5 14 114 18103 15000 50 x 105 13.5 25.6 5.67 1.89 8.5 0.13 5.5 10.5 114 18153 22000 65 x 105 21 40 8.32 2.77 5.0 0.11 3.5 6.0 114 18223 33000 65 x 105 22 42 12.48 4.16 4.5 0.14 3.5 6.0 114 18333 47000 75 x 105 30 50 17.77 5.92 3.0 0.14 3.0 4.5 114 18473 3.0 0.21 3.0 4.5 Philips Components IR 100 Hz 85 C (A) CR 100 Hz (F) Aluminium electrolytic capacitors Power Eurodin Screw Terminals 1998 Mar 16 NOMINAL CASE SIZE D x L (mm) UR (V) 114 17683 Product specification 114/115 PED-ST Z TYP. 20 kHz (m) Z MAX. 20 kHz (m) CATALOGUE NUMBER (see Table 3, note 1) 2222 ... ..... 85 0.09 45 67 114 19102 0.30 65 0.10 40 60 114 19152 0.41 45 0.10 28 42 114 19222 1.98 0.66 30 0.10 19 28 114 19332 14.0 2.82 0.94 27 0.11 17 25 114 19472 18.8 4.08 1.36 19 0.11 12 18 114 19682 15.0 28.5 6.00 2.00 11 0.11 7 11 114 19103 65 x 105 15.8 30.0 9.00 3.00 10 0.12 6 10 114 19153 75 x 105 20.5 38.9 13.20 4.40 7 0.12 5 8 114 19223 Tan MAX. 100 Hz Z TYP. 20 kHz (m) Z MAX. 20 kHz (m) CATALOGUE NUMBER (see note 1) 2222 ... ..... 1000 35 x 60 3.0 1500 35 x 60 2200 35 x 80 3300 Table 3 6 Tan MAX. 100 Hz 100 IR 20 kHz 70 C (A) IL1 1 min (mA) IL5 5 min (mA) 5.7 0.60 0.20 3.3 6.3 0.90 4.6 8.7 1.32 35 x 105 6.5 12.3 4700 50 x 80 7.4 6800 50 x 105 9.9 10000 65 x 105 15000 22000 ESR TYP. 100 Hz (m) Electrical data and ordering information for the 115 series; preferred types in bold NOMINAL CASE SIZE D x L (mm) IR 100 Hz 85 C (A) IR 20 kHz 70 C (A) IL5 5 min (mA) 250 330 35 x 60 1.8 3.4 0.50 0.17 300 0.15 275 500 115 13331 470 35 x 80 2.5 4.7 0.71 0.24 250 0.15 140 375 115 13471 680 35 x 105 3.5 6.6 1.02 0.34 180 0.15 125 300 115 13681 1000 50 x 80 4.2 8 1.50 0.50 110 0.15 60 130 115 13102 1500 50 x 105 6.3 12 2.25 0.75 60 0.15 40 100 115 13152 2200 65 x 105 8.8 16.7 3.30 1.10 45 0.15 30 60 115 13222 3300 65 x 105 10.5 20 4.95 1.65 30 0.15 25 50 115 13332 4700 75 x 105 14 7.05 2.35 25 0.15 20 40 115 13472 35 x 60 1.9 3.6 0.47 0.16 360 0.10 220 480 115 15221 330 35 x 80 2.5 4.8 0.70 0.23 245 0.10 150 320 115 15331 470 35 x 105 3.2 6.1 0.99 0.33 175 0.10 105 230 115 15471 680 50 x 80 3.9 7.0 1.47 0.48 140 0.10 60 130 115 15681 50 x 105 5.4 9.7 2.14 0.71 65 0.10 50 100 115 15102 1000 Product specification 26.5 220 114/115 PED-ST CR 100 Hz (F) 350 IL1 1 min (mA) ESR TYP. 100 Hz (m) UR (V) Philips Components IR 100 Hz 85 C (A) CR 100 Hz (F) Aluminium electrolytic capacitors Power Eurodin Screw Terminals 1998 Mar 16 NOMINAL CASE SIZE D x L (mm) UR (V) 385 400 NOMINAL CASE SIZE D x L (mm) IR 100 Hz 85 C (A) 1500 65 x 105 2200 65 x 105 9.1 17.5 4.62 1.54 35 0.10 3300 75 x 105 10.8 19.4 6.93 2.31 30 0.12 150 35 x 60 1.0 1.8 0.34 0.12 730 0.12 7.7 IR 20 kHz 70 C (A) IL1 1 min (mA) IL5 5 min (mA) 14.8 3.15 1.05 ESR TYP. 100 Hz (m) 55 Tan MAX. 100 Hz Z TYP. 20 kHz (m) Z MAX. 20 kHz (m) CATALOGUE NUMBER (see note 1) 2222 ... ..... 0.10 30 70 115 15152 22 50 115 15222 20 45 115 15332 450 935 115 18151 220 35 x 80 1.4 2.6 0.50 0.17 520 0.12 310 630 115 18221 330 35 x 105 1.9 3.6 0.75 0.25 340 0.12 210 425 115 18331 470 50 x 80 2.7 5.1 1.06 0.36 200 0.12 140 300 115 18471 680 50 x 105 3.6 6.9 1.53 0.51 140 0.12 100 205 115 18681 1000 65 x 105 5.1 9.7 2.25 0.75 95 0.12 65 125 115 18102 1500 65 x 105 5.7 10.6 3.38 1.13 80 0.12 45 95 115 18152 7 2200 75 x 105 7.3 13.8 4.95 1.65 55 0.12 40 75 115 18222 150 35 x 60 1.0 1.8 0.36 0.12 730 0.12 450 935 115 16151 220 35 x 80 1.4 2.6 0.53 0.18 520 0.12 310 630 115 16221 330 35 x 105 1.9 3.6 0.79 0.26 340 0.12 210 425 115 16331 470 50 x 80 2.7 5.1 1.13 0.38 200 0.12 140 300 115 16471 680 50 x 105 3.6 6.9 1.63 0.54 140 0.12 100 205 115 16681 1000 65 x 105 5.1 9.7 2.40 0.80 95 0.12 65 125 115 16102 1500 65 x 105 5.7 10.6 3.60 1.20 80 0.12 45 95 115 16152 2200 75 x 105 7.3 13.8 5.28 1.76 55 0.12 40 75 115 16222 Philips Components 350 CR 100 Hz (F) Aluminium electrolytic capacitors Power Eurodin Screw Terminals 1998 Mar 16 UR (V) Note 1. Catalogue number applies to the ST version; for STB version (not preferred) replace 8th digit by `5' (2222 114/115 5....). Product specification 114/115 PED-ST Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST Additional electrical data PARAMETER CONDITIONS VALUE Voltage Surge voltage for short periods 250 V versions Us = 1.15 x UR 350 V versions Us = 1.1 x UR Urev 1 V Reverse voltage Current Leakage current after 1 minute at UR IL1 0.006CR x UR + 4 A after 5 minutes at UR IL5 0.002CR x UR + 4 A Inductance Equivalent series inductance (ESL) 1998 Mar 16 case D = 35 mm typ. 13 nH case D = 50 mm typ. 16 nH case D = 65 mm typ. 19 nH case D = 75 mm typ. 20 nH 8 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST Equivalent series resistance (ESR) MGB304 10 3 handbook, 4 columns ESR (m ) 10 2 1 2 3 4 5 10 Curve 1: case D x L = 35 x 60 mm. Curve 2: case D x L = 35 x 80 mm. Curve 3: case D x L = 35 x 105 mm. Curve 4: case D x L = 50 x 80 mm. Curve 5: case D x L = 50 x 105 mm. Curve 6: case D x L = 65 x 105 mm; 100000 F. Curve 7: case D x L = 65 x 105 mm; 150000 F. Curve 8: case D x L = 75 x 105 mm. ESR at 100 Hz and UR = 10 V. 6 7 8 1 50 0 50 T amb ( oC) 100 Fig.3 Typical ESR as a function of temperature. MGB305 10 3 handbook, 4 columns ESR (m ) 10 2 Curve 1: case D x L = 35 x 60 mm; 2200 F. Curve 2: case D x L = 35 x 60 mm; 3300 F. Curve 3: case D x L = 35 x 80 mm. Curve 4: case D x L = 35 x 105 mm. Curve 5: case D x L = 50 x 80 mm. Curve 6: case D x L = 50 x 105 mm. Curve 7: case D x L = 65 x 105 mm; 22000 F. Curve 8: case D x L = 65 x 105 mm; 33000 F. Curve 9: case D x L = 75 x 105 mm. ESR at 100 Hz and UR = 63 V. 1 2 3 4 5 6 10 7 8 9 1 50 0 Fig.4 Typical ESR as a function of temperature. 1998 Mar 16 9 50 T amb ( oC) 100 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST MGB306 10 4 handbook, 4 columns ESR (m ) 10 3 10 2 1 2 10 50 Curve 1: case D x L = 50 x 80 mm. Curve 2: case D x L = 50 x 105 mm. ESR at 100 Hz and UR = 250 V. 0 50 T amb ( oC) 100 Fig.5 Typical ESR as a function of temperature. MGB307 10 5 handbook, 4 columns ESR (m ) 10 4 10 3 1 2 10 2 Curve 1: case D x L = 35 x 60 mm. Curve 2: case D x L = 35 x 80 mm. Curve 3: case D x L = 35 x 105 mm. Curve 4: case D x L = 50 x 80 mm. Curve 5: case D x L = 50 x 105 mm. Curve 6: case D x L = 65 x 105 mm; 1000 F. Curve 7: case D x L = 65 x 105 mm; 1500 F. 10 3 4 5 6 7 8 50 0 Curve 8: case D x L = 75 x 105 mm. ESR at 100 Hz and UR = 385 V. Fig.6 Typical ESR as a function of temperature. 1998 Mar 16 10 50 T amb ( oC) 100 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST Impedance (Z) MGB308 10 3 handbook, 4 columns Z (m ) 1 2 10 2 3 4 5 6 7 10 Curve 1: case D x L = 35 x 60 mm. Curve 2: case D x L = 35 x 80 mm. Curve 3: case D x L = 35 x 105 mm. Curve 4: case D x L = 50 x 80 mm. Curve 5: case D x L = 50 x 105 mm. Curve 6: case D x L = 65 x 105 mm. Curve 7: case D x L = 75 x 105 mm. Z at 20 kHz and UR = 10 V. 1 50 0 50 T amb ( oC) 100 Fig.7 Typical impedance as a function of temperature. MGB309 10 3 handbook, 4 columns 1 2 Z (m ) 3 4 10 2 5 6 7 8 10 Curve 1: case D x L = 35 x 60 mm; 2200 F. Curve 2: case D x L = 35 x 60 mm; 3300 F. Curve 3: case D x L = 35 x 80 mm. Curve 4: case D x L = 35 x 105 mm. Curve 5: case D x L = 50 x 80 mm. Curve 6: case D x L = 50 x 105 mm. Curve 7: case D x L = 65 x 105 mm. Curve 8: case D x L = 75 x 105 mm. Z at 20 kHz and UR = 63 V. 1 50 0 50 Fig.8 Typical impedance as a function of temperature. 1998 Mar 16 11 T amb ( oC) 100 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 10 4 handbook, 4 columns Z (m ) 10 3 114/115 PED-ST MGB310 1 2 3 4 5 6 7 8 10 2 Curve 1: case D x L = 35 x 60 mm. Curve 2: case D x L = 35 x 80 mm. Curve 3: case D x L = 35 x 105 mm. Curve 4: case D x L = 50 x 80 mm. Curve 5: case D x L = 50 x 105 mm. Curve 6: case D x L = 65 x 105 mm; 2200 F. Curve 7: case D x L = 65 x 105 mm; 3300 F. Curve 8: case D x L = 75 x 105 mm. Z at 20 kHz and UR = 250 V. 10 1 50 0 50 T amb ( oC) 100 Fig.9 Typical impedance as a function of temperature. MGB311 10 4 handbook, 4 columns 1 2 Z (m ) 3 4 5 6 7 8 10 3 10 2 Curve 1: case D x L = 35 x 60 mm. Curve 2: case D x L = 35 x 80 mm. 10 Curve 3: case D x L = 35 x 105 mm. Curve 4: case D x L = 50 x 80 mm. Curve 5: case D x L = 50 x 105 mm. Curve 6: case D x L = 65 x 105 mm; 1000 F. Curve 7: case D x L = 65 x 105 mm; 1500 F. Curve 8: case D x L = 75 x 105 mm. Z at 20 kHz and UR = 385 V. 1 50 0 50 Fig.10 Typical impedance as a function of temperature. 1998 Mar 16 12 T amb ( oC) 100 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST MGB312 10 handbook, 4 columns Z ( ) 1 1 2 10 1 10 2 Curve 1: 2200 F, 63 V. Curve 2: 15000 F, 10 V. Case D x L = 35 x 60 mm. Tamb = 20 C. 10 3 10 102 103 104 105 106 f (Hz) 10 7 Fig.11 Typical impedance as a function of frequency. MGB313 10 handbook, 4 columns Z ( ) 1 1 2 10 1 10 2 Curve 1: 4700 F, 63 V. Curve 2: 22000 F, 10 V. Case D x L = 35 x 80 mm. Tamb = 20 C. 10 3 10 10 2 10 3 10 4 10 5 Fig.12 Typical impedance as a function of frequency. 1998 Mar 16 13 10 6 7 f (Hz) 10 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST MGB314 10 handbook, 4 columns Z ( ) 1 1 2 10 1 10 2 Curve 1: 6800 F, 63 V. Curve 2: 33000 F, 10 V. Case D x L = 35 x 105 mm. Tamb = 20 C. 10 3 10 102 103 104 105 106 f (Hz) 10 7 Fig.13 Typical impedance as a function of frequency. MGB315 10 handbook, 4 columns Z ( ) 1 1 2 10 1 10 2 Curve 1: 10000 F, 63 V. Curve 2: 47000 F, 10 V. Case D x L = 50 x 80 mm. Tamb = 20 C. 10 3 10 102 103 104 105 Fig.14 Typical impedance as a function of frequency. 1998 Mar 16 14 106 f (Hz) 10 7 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST MGB316 10 handbook, 4 columns Z ( ) 1 1 10 1 2 10 2 Curve 1: 15000 F, 63 V. Curve 2: 68000 F, 10 V. Case D x L = 50 x 105 mm. Tamb = 20 C. 10 3 10 102 103 104 105 106 f (Hz) 10 7 Fig.15 Typical impedance as a function of frequency. MGB317 10 handbook, 4 columns Z ( ) 1 1 10 1 2 10 2 Curve 1: 22000 F, 63 V. Curve 2: 150000 F, 10 V. Case D x L = 65 x 105 mm. Tamb = 20 C. 10 3 10 102 103 104 105 Fig.16 Typical impedance as a function of frequency. 1998 Mar 16 15 106 f (Hz) 10 7 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST MGB318 10 handbook, 4 columns Z ( ) 1 1 10 1 2 10 2 Curve 1: 47000 F, 63 V. Curve 2: 220000 F, 10 V. Case D x L = 75 x 105 mm. Tamb = 20 C. 10 3 10 102 103 104 105 106 f (Hz) 10 7 Fig.17 Typical impedance as a function of frequency. 10 handbook, 4 columns MGB319 1 2 Z ( ) 1 10 1 10 2 Curve 1: 150 F, 385 V. Curve 2: 330 F, 250 V. Case D x L = 35 x 60 mm. Tamb = 20 C. 10 3 10 102 103 104 105 Fig.18 Typical impedance as a function of frequency. 1998 Mar 16 16 106 f (Hz) 10 7 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST MGB320 10 handbook, 4 columns 1 Z ( ) 2 1 10 1 10 2 Curve 1: 220 F, 385 V. Curve 2: 470 F, 250 V. Case D x L = 35 x 80 mm. Tamb = 20 C. 10 3 10 102 103 104 105 106 f (Hz) 10 7 Fig.19 Typical impedance as a function of frequency. MGB321 10 handbook, 4 columns Z ( ) 1 2 1 10 1 10 2 Curve 1: 330 F, 385 V. Curve 2: 680 F, 250 V. Case D x L = 35 x 105 mm. Tamb = 20 C. 10 3 10 102 103 104 105 Fig.20 Typical impedance as a function of frequency. 1998 Mar 16 17 106 f (Hz) 10 7 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST MGB322 10 handbook, 4 columns Z ( ) 1 2 3 1 10 1 10 2 Curve 1: 470 F, 385 V. Curve 2: 1000 F, 250 V. Curve 3: 680 F, 350 V. Case D x L = 50 x 80 mm. Tamb = 20 C. 10 3 10 102 103 104 105 106 f (Hz) 10 7 Fig.21 Typical impedance as a function of frequency. MGB323 10 handbook, 4 columns Z ( ) 1 1 2 3 10 1 10 2 Curve 1: 680 F, 385 V. Curve 2: 1000 F, 350 V. Curve 3: 1500 F, 250 V. Case D x L = 50 x 105 mm. Tamb = 20 C. 10 3 10 102 103 104 105 Fig.22 Typical impedance as a function of frequency. 1998 Mar 16 18 106 f (Hz) 10 7 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST MBC449 4 10 handbook, 4 columns Z (m ) 1 2 3 4 10 3 10 2 10 Curve 1: 1000 F, 385 V. Curve 2: 1500 F, 385 V. Curve 3: 2200 F, 250 V. Curve 4: 3300 F, 250 V. Case D x L = 65 x 105 mm. Tamb = 20 C. 1 1 10 2 10 10 3 10 4 10 5 f (Hz) 10 6 Fig.23 Typical impedance as a function of frequency. MGB324 10 handbook, 4 columns Z ( ) 1 1 2 10 1 10 2 Curve 1: 2200 F, 385 V. Curve 2: 4700 F, 250 V Case D x L = 75 x 105 mm. Tamb = 20 C. 10 3 10 10 2 10 3 10 4 10 5 Fig.24 Typical impedance as a function of frequency. 1998 Mar 16 19 10 6 7 f (Hz) 10 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST RIPPLE CURRENT AND USEFUL LIFE Table 4 Multiplier of ripple current (IR) as a function of frequency FREQUENCY (Hz) IR MULTIPLIER 50 0.83 100 1.00 200 1.10 400 1.15 1000 1.19 2000 1.20 MGA453 2.4 handbook, full pagewidth 2.3 IA IR 2.2 2.1 2.0 1.9 1.8 1.7 1 life multiplier 2 1. 1.6 5 1. 2 1.5 5 2. 3 1.4 4 5 1.3 8 10 1.2 15 1.1 20 60 0.8 80 0.5 0.0 40 (1) 30 1.0 50 60 70 80 Tamb ( oC) 90 IA = actual ripple current at 100 Hz and 85 C. IR = rated ripple current at 100 Hz and 85 C. With an absolute maximum of 50 A at 85 C (1) Useful life at 85 C and IR applied: 20000 hours (5000 hours for 400 V types). Fig.25 Multiplier of useful life as a function of ambient temperature and ripple current load. 1998 Mar 16 20 Philips Components Product specification Aluminium electrolytic capacitors Power Eurodin Screw Terminals 114/115 PED-ST SPECIFIC TESTS AND REQUIREMENTS General tests and requirements are specified in this handbook, Section "Tests and Requirements". Table 5 Test procedures and requirements TEST NAME OF TEST Endurance REFERENCE IEC 384-4/ CECC 30300 subclause 4.13 PROCEDURE (quick reference) Tamb = 85 C; UR applied; 8000 hours (400 V types: 2000 hours) REQUIREMENTS UR 100 V; C/C: 15% UR > 100 V; C/C: 10% Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 85 C; UR and IR applied; 20000 hours (400 V types: 5000 hours) UR 100 V; C/C: 45% UR > 100 V; C/C: 30% Z 3 x spec. limit IL5 spec. limit no short or open circuit, no visible damage total failure percentage: UR 100 V: 1%; UR > 100 V: 3% Shelf life IEC 384-4/ (storage at CECC 30300 high temperature) subclause 4.17 1998 Mar 16 Tamb = 85 C; no voltage applied; 500 hours after test: UR to be applied for 30 minutes, 24 to 48 hours before measurement 21 C/C: 10% IL5 2 x spec. limit