VSSRC1284 Vishay Thin Film 25 Mil Pitch Resistor/Capacitor Networks FEATURES * Lead (Pb)-free standard * Rugged, molded case construction JEDEC mo-137AD RoHS COMPLIANT * Reduces total assembly costs * Saves board space * Compatible with automatic surface mounting equipment * Uniform performance characteristics * Resistors and capacitors on a single chip * UL 94V-0 flame resistant TYPICAL PERFORMANCE Actual Size RESISTOR TCR TOLERANCE 200 10 % TCC TOLERANCE 200 20 % IEEE 1284 Parallel Port Termination Network CAPACITOR SCHEMATIC 20 19 17 16 15 R2 R2 R2 R2 R2 R1 R1 R1 R1 R1 1 RC NETWORKS 18 2 3 14 R2 R1 4 5 6 13 12 11 R2 R2 R2 R1 R1 R1 7 8 9 10 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS 10 to 10 k Resistance Range Absolute 10 % (R1 or R2) Absolute 20 % (C) Tolerance: Per Resistor at 1 MHz and VRMS over + 10 C to + 70 C 100 mW Power Rating: Package 1W Capacitance Range 27 pF to 220 pF Breakdown Voltage 25 V ESD Protection www.vishay.com 118 > 2 kV For technical questions, contact: thin-film@vishay.com Based on number of resistors MIL-STD-883, Method 3015 Document Number: 60077 Revision: 01-Jul-08 VSSRC1284 25 Mil Pitch Resistor/Capacitor Networks Vishay Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters MODEL VSSRC1284 DIMENSION Date Code INCHES MILLIMETERS 0.344 Max. 8.74 Max. B (Ref.) 0.025 0.64 C (Ref.) 0.010 0.25 D 0.006 0.15 E (Typ.) 0.025 0.64 F 0.154 0.003 3.85 0.08 G 0.015 x 45 0.38 x 45 H 0.236 0.008 5.9 0.20 0.010 0.25 0.064 0.005 1.64 0.13 B Part Number C VSSRC A E 1284 H F Pin #1 G A J W J (Ref.) D W Note: Mold flash not included in body dimensions IMPRINTING VSSRC1284-X Date code Resistive Element Tantalum Nitride Substrate Material Silicon Terminals Lead Coplanarity Copper Alloy 100 % Sn Matte 0.0005 Inches 100 80 60 40 20 0 Marking Resistance to Solvents MODEL Permanency testing per MIL-STD-202, Method 215 - 50 0 25 70 125 R1 10 % R2 10 % C 20 % VSSRC1284-1 2.2 k 33 220 pF VSSRC1284-2 4.7 k 33 180 pF VSSRC1284-3 1 k 33 180 pF VSSRC1284-4 4.7 k 10 180 pF VSSRC1284-5 4.7 k 27 33 pF VSSRC1284-6 4.7 k 270 33 pF VSSRC1284-7 10 k 10 27 pF Document Number: 60077 Revision: 01-Jul-08 150 Ambient Temperature C For technical questions, contact: thin-film@vishay.com www.vishay.com 119 RC NETWORKS Plating Molded Epoxy Percent of Rated Power DERATING CURVE MECHANICAL SPECIFICATIONS Body -X = Molded version number from table below VSSRC1284 25 Mil Pitch Resistor/Capacitor Networks Vishay Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VSSRC1284-1TF (preferred part number format) V S S R C 1 2 GLOBAL MODEL VALUE VSSRC1284 (Lead (Pb)-free) (e3) -1 -2 -3 -4 -5 -6 -7 8 4 - 1 T F PACKAGING UF = TUBED TAPE AND REEL TF = Full Reels Historical Part Number example: VSSRC1284-1T/R (will continue to be accepted) -1 T/R MODEL VALUE PACKAGING RC NETWORKS VSSRC1284 www.vishay.com 120 For technical questions, contact: thin-film@vishay.com Document Number: 60077 Revision: 01-Jul-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1