Emboss Tape JAS CONNECTOR 0.4mm pitch/Board-to-board connectors Specifications ------------------- * Current rating: 0.3A AC, DC * Voltage rating: 30V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/70m max. After environmental testing/140m max. * Insulation resistance: 50M min. * Withstanding voltage: 100V AC/minute * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * The plug housing is constructed of two separate parts. This allows the connector to be put under greater torsion strain than similar connectors without any damage being done to the solder joints. * Both plug and receptacle have the double I type solder tabs, which reduces the stress by the distorted mating/unmating applied to the solder tails. PC board layout (viewed from component side) and Assembly layout Receptacle 0.40.03 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 1 0.20.05 0.750.1 0.850.1 0.5 4.2 0.5 4.0 Stacking height 4.0 Stacking height 4.5 0.850.1 2.9 0.750.1 5.4 0.20.05 1.55 0.4 1.55 3.1 5.6 0.40.03 1.55 0.4 1.55 Plug JAS CONNECTOR Plug Circuits A B Q'ty / reel 80P-JASKS-GE-TF 15.6 19.0 2,500 100 100P-JASKS-GE-TF 19.6 23.0 2,500 120 120P-JASKS-GE-TF2 23.6 27.0 1,500 80 B Dimensions (mm) Model No. Material and Finish Contact: Phosphor bronze, nickel-undercoated, gold-plated Housing: PPS, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. 0.16 Note: The products listed above are supplied on embossed-tape. 0.5 2.6 4.2 0.4 A 1.7 Receptacle Dimensions (mm) Model No. Circuits 4.0mm B A B Q'ty / reel 15.6 18.6 2,500 19.6 22.6 2,500 120R4.5-JASKS-GWAN-TF2 23.6 26.6 1,500 Stacking height 80 80R-JASKS-GWAN-TF 4.5mm -- 100 100R-JASKS-GWAN-TF 100R4.5-JASKS-GWAN-TF 120 -- Material and Finish Stacking height 4.0 : 3.2 Stacking height 4.5 : 3.7 0.16 4.0 0.5 Contact: Phosphor bronze, nickel-undercoated, gold-plated (nickel-stripe) Housing: LCP, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. 0.4 A 1.5 2