1
Specifications –––––––––––––––––––
• Current rating: 0.3A AC, DC
• Voltage rating: 30V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/70m Ωmax.
After environmental testing/140m Ωmax.
• Insulation resistance: 50M Ωmin.
• Withstanding voltage: 100V AC/minute
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
JAS CONNECTOR
0.4mm pitch/Board-to-board connectors
Emboss Tape
• The plug housing is constructed of two
separate parts. This allows the connector to
be put under greater torsion strain than
similar connectors without any damage
being done to the solder joints.
• Both plug and receptacle have the double I
type solder tabs, which reduces the stress
by the distorted mating/unmating applied to
the solder tails.
±0.03
0.4 ±0.05
0.2 ±0.1
0.75 ±0.1
0.85
5.6
3.1
0.41.55 1.55
±0.03
0.4 ±0.05
0.2 ±0.1
0.75 ±0.1
0.85
5.4
0.41.55 1.55
2.9
Note: 1. Tolerances are non-cumulative:
±
0.05mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
0.5 4.2
0.5 4.0
Stacking height 4.0
Stacking height 4.5
Plug Receptacle
PC board layout (viewed from component side) and Assembly layout
2
JAS CONNECTOR
0.4
1.7
B
A
4.2 0.5
2.6
0.16
B
Q'ty /
reel
19.0
23.0
27.0
2,500
2,500
1,500
Circuits
Dimensions (mm)
80
100
120
A
15.6
19.6
23.6
Model No.
80P-JASKS-GE-TF
100P-JASKS-GE-TF
120P-JASKS-GE-TF2
Material and Finish
Contact: Phosphor bronze, nickel-undercoated, gold-plated
Housing: PPS, UL94V-0
Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
0.4
1.5A
B
0.16
4.0
Stacking height4.0 : 3.2
Stacking height4.5 : 3.7
0.5
B
Q'ty /
reel
18.6
22.6
26.6
2,500
2,500
1,500
Circuits
Dimensions (mm)
80
100
120
A
15.6
19.6
23.6
Model No.
Stacking height
80R-JASKS-GWAN-TF
100R-JASKS-GWAN-TF
—
—
100R4.5-JASKS-GWAN-TF
120R4.5-JASKS-GWAN-TF2
Material and Finish
Contact: Phosphor bronze, nickel-undercoated, gold-plated (nickel-stripe)
Housing: LCP, UL94V-0
Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
4.0mm 4.5mm
RoHS compliance This product displays (LF)(SN) on a label.
Note: The products listed above are supplied on embossed-tape.
RoHS compliance This product displays (LF)(SN) on a label.
Note: The products listed above are supplied on embossed-tape.
Plug
Receptacle