Mounting Accessories for Resistors www.vishay.com Vishay Draloric PUSH-IN BRACKET FORM A For the assembly of resistors without pins. The retaining brackets are supplied loose. To prevent rotation the resistors are also available slotted at one end upon request. Depending on the type, this reduces the leakage path (creeping distance) to the clamp by 1.2 mm to 3.5 mm. d c b f g C e a B Steel, zinc-plated A ORDER REF. PART NUMBER 401 541 DN 104 BRACKETA00401541 401 543 DN 104 BRACKETA00401543 401 545 DN 104 BRACKETA00401545 401 546 DN 104 BRACKETA00401546 401 547 DN 104 BRACKETA00401547 401 548 DN 104 BRACKETA00401548 SUITABLE FOR GWS 25, GWS 35, GWS 50, GWS 75, RW 12/..., ZWS 12, ZWS 15 ZWS 20, ZWS 35, ZW 13/... GWS 100, GWS 220, GWS 300 GBS 20/... ZWS 50, ZWS 100, ZWS 150, ZW 20/..., ZBS 20/... GWS 500 ..., GWS 30/..., RW 30/..., GBS 30/..., ZWS 30/..., ZBS 30/... GBS 45/..., ZBS 45/... A B C DIMENSIONS in millimeters [inches] a b c d e 10 20.5 4.3 11 15 [0.591] [0.394] [0.807] [0.169] [0.433] 16 [0.63] f g 20 5.9 1.5 1 [0.787] [0.232] [0.059] [0.039] 15 [0.591] 16 [0.63] 25.5 5.3 11 21 25 8 1.8 1 [1.004] [0.209] [0.433] [0.827] [0.984] [0.315] [0.071] [0.039] 15 [0.591] 16 [0.63] 25.5 5.3 11 21 25 10.5 1.8 1 [1.004] [0.209] [0.433] [0.827] [0.984] [0.413] [0.071] [0.039] 15 [0.591] 16 [0.63] 25.5 5.3 11 21 25 14.5 1.8 1 [1.004] [0.209] [0.433] [0.827] [0.984] [0.571] [0.071] [0.039] 20 30 30.5 5.3 16 21 25 19 2.5 1.5 [0.787] [1.181] [1.200] [0.209] [0.630] [0.827] [0.984] [0.749] [0.098] [0.059] 20 40 45.5 5.3 [0.787] [1.575] [1.791] [0.209] 16 [0.63] 21 25 [0.827] [0.984] 31 [1.22] 2.5 1.5 [0.098] [0.059] L N D M H G E C F B K Steel, zinc-plated A ORDER REF. PART NUMBER 424 339 BRACKETA00424339 402 996 BRACKETA00402996 Revision: 31-Mar-17 SUITABLE FOR A B GWS 500, GWS 30/..., RW 30/..., 17.5 5 GBS 30/..., [0.689] [0.197] ZWS 30/..., ZBS 30/... RW 20/76, 15.8 4.4 RW 20/102 [0.622] [0.173] C DIMENSIONS in millimeters [inches] D E F G H K 28.2 [1.11] 16 17.5 12.7 6.5 8.5 0.64 [0.63] [0.689] [0.5] [0.256] [0.335] [0.025] L M N - - - 20.6 9.5 12.7 9.5 9 12 0.64 11 1.6 45 [0.811] [0.374] [0.5] [0.374] [0.354] [0.472] [0.025] [0.433] [0.063] Document Number: 21015 1 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Mounting Accessories for Resistors www.vishay.com Vishay Draloric RETAINING BRACKET C D E F G H A B J I ORDER REF. 406 330 SUITABLE FOR PART NUMBER A B C DIMENSIONS in millimeters [inches] D E F G H I J GBS 60/370, 68 3 43.8 - 0.1 3.5 63 28 22 5.5 8 25 GBS 60/370 E, BRACKETR00406330 ZBS 60/370, [2.677] [0.118] [1.724 - 0.004] [0.138] [2.48] [1.102] [0.866] [0.217] [0.315] [0.984] ZBS 60/370 E PUSH-IN BRACKET FORM B For the assembly of resistors with threaded bolt. Delivery a) As loose accessories b) Fully assembled: On request, for ordering code contact marketing. DESIGN II INSIDE BRACKET Steel, zinc-plated L1 DESIGN I OUTSIDE BRACKET L C a a1 g B Design I and II are a set of: 1 piece Screw bolt 2 pieces Centering discs 2 pieces Brackets form B 2 pieces Lock washers 2 pieces Hexagonal nuts GWS 20 ...GWS 75 GWS 100... GWS 30/133 L1 a2 b A ZWS ORDER REF. 043 427 043 436 043 428 043 437 043 429 043 438 043 430 043 439 043 431 043 440 043 432 043 441 043 433 043 442 043 434 043 443 043 435 043 444 047 163 047 174 047 164 047 175 a2 PART NUMBER BRACKETB00043427 BRACKETB00043436 BRACKETB00043428 BRACKETB00043437 BRACKETB00043429 BRACKETB00043438 BRACKETB00043430 BRACKETB00043439 BRACKETB00043431 BRACKETB00043440 BRACKETB00043432 BRACKETB00043441 BRACKETB00043433 BRACKETB00043442 BRACKETB00043434 BRACKETB00043443 BRACKETB00043435 BRACKETB00043444 BRACKETB00047163 BRACKETB00047174 BRACKETB00047164 BRACKETB00047175 SUITABLE FOR DIMENSIONS in millimeters [inches] L L1 a1 a2 GWS 20 50 61 69 34 [1.969] [2.402] [2.717] [1.339] ZWS 8 GWS 25 55 68 74 39 [2.165] [2.677] [2.913] [1.535] ZWS 12 GWS 35 62 74 81 46 [2.441] [2.913] [3.189] [1.811] ZWS 15 GWS 50 62 74 82 47 [2.441] [2.913] [3.228] [1.85] ZWS 20 GWS 75 100 114 120 85 [3.937] [4.488] [4.724] [3.346] ZWS 35 GWS 100 100 116 120 85 [3.937] [4.567] [4.724] [3.346] ZWS 50 GWS 220 165 182 185 150 [6.496] [7.165] [7.283] [9.843] ZWS 100 GWS 300 265 283 285 250 [10.433] [11.142] [11.22] [9.843] ZWS 150 GWS 500 330 353 356 310 [12.992] [13.898] [14.016] [12.205] ZWS 250 GWS 30/100 126 80 100 116 ZWS 30/100 [3.937] [4.567] [4.961] [3.15] GWS 30/133 133 161 159 113 ZWS 30/133 [5.236] [6.339] [6.26] [4.449] A B C a b g 15 10 13.5 4.3 11 1.5 [0.591] [0.394] [0.531] [0.169] [0.433] [0.059] 15 10 13.5 4.3 11 1.5 [0.591] [0.394] [0.531] [0.169] [0.433] [0.059] 15 10 13.5 4.3 11 1.5 [0.591] [0.394] [0.531] [0.169] [0.433] [0.059] 15 13 [0.591] [0.512] 16.5 [0.65] 4.3 11 1.5 [0.169] [0.433] [0.059] 15 13 [0.591] [0.512] 16.5 [0.65] 4.3 11 1.5 [0.169] [0.433] [0.059] 15 20 20 5.3 11 1.5 [0.591] [0.787] [0.787] [0.209] [0.433] [0.059] 15 20 20 5.3 11 1.5 [0.591] [0.787] [0.787] [0.209] [0.433] [0.059] 15 20 20 5.3 11 1.5 [0.591] [0.787] [0.787] [0.209] [0.433] [0.059] 20 30 30 5.3 15 2 [0.787] [1.181] [1.181] [0.209] [0.591] [0.079] 20 30 30 5.3 15 2 [0.787] [1.181] [1.181] [0.209] [0.591] [0.079] 20 30 30 5.3 15 2 [0.787] [1.181] [1.181] [0.209] [0.591] [0.079] Note * The use of ceramic centering discs increases the dimensions L, L1, a1 and a2 about 10 mm [0.394"] with types GWS 25 to GWS 30/133 and ZWS 12 to ZWS 30/133 Revision: 31-Mar-17 Document Number: 21015 2 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Mounting Accessories for Resistors www.vishay.com Vishay Draloric SPRING CLIPS - Suitable for GWK and ZWK 6 [0.236] 6.5 [0.256] 15 10.5 [0.413] 3.5 [0.138] R 0.5 [0.020] [0.591] o 3.3 [0.130] L s C B d 15 [0.591] 7.3 [0.287] b D A Figure 1: Spring clip 401 549 DN 105 Figure 2: Spring clip SPRING CLIP DIMENSIONS in millimeters [inches] MODEL ORDER REF. PART NUMBER D R A B C d L s b GWK 10 GWK 10 Ni GWK 20 GWK 20 Ni 401 549 DN 105 SPRICLIP00401549 See drawing Figure 1 ZWK 10 ZWK 10 Ni 401 550 DN 105 SPRICLIP00401550 9 [0.354] 5.5 [0.217] 11 [0.433] 10 [0.394] 13 [0.512] 3.5 [0.138] 20 [0.787] 0.6 [0.024] 8.5 [0.335] GWK 40.. GWK 40 Ni GWK 60 GWK 60 Ni ZWK 15 ZWK 15 Ni ZWK 20 ZWK 20 Ni 401 551 DN 105 SPRICLIP00401551 11.5 [0.453] 7 [0.276] 15 [0.591] 10 [0.394] 16 [0.630] 4.5 [0.177] 24 [0.945] 0.6 [0.024] 8 [0.315] ZWK 40 GWK 100 ZWK 40 Ni GWK 100 Ni ZWK 60 GWK 150 ZWK 60 Ni GWK 150 Ni ZWK 90 GWK 200 ZWK 90 Ni GWK 200 Ni ZWK 150 GWK 300 GWK 300 Ni ZWK 150 Ni 401 553 DN 105 SPRICLIP00401553 18 [0.709] 10.5 [0.413] 20 [0.787] 15 [0.591] 20 [0.787] 4.5 [0.177] 31 [1.220] 0.8 [0.031] 12.5 [0.492] CENTERING DISCS (steel, zinc-plated) for resistors with through-pin Di d s h Da ORDER REF. PART NUMBER 401 525 DN 102 CENTDISC00401525 401 528 DN 102 CENTDISC00401528 401 529 DN 102 CENTDISC00401529 401 531 DN 102 CENTDISC00401531 414 295 DN 102 CENTDISC00414295 Revision: 31-Mar-17 SUITABLE FOR GWS 25, GWS 35, GWS 50, GWS 75, RW12/.., ZWS 12, ZWS 15, ZWS 20, ZWS 35, ZW 13/... GWS 100, GWS 220, GWS 300, GBS 20/.. ZWS 50, ZWS 100, ZWS 150 RW 20/... GWS 500, RW 30/..., ZWS 250 GWS 30/..., GBS 30/..., ZWS 30/..., ZBS 30/... DIMENSIONS in millimeters [inches] Da Di d h s 13 [0.512] 5.3 [0.209] 3.2 [0.126] 1.5 [0.059] 0.5 [0.020] 20 [0.787] 9.7 [0.382] 4.5 [0.177] 1.5 [0.059] 0.5 [0.020] 20 [0.787] 30 [1.181] 30 [1.181] 11.6 [0.457] 17.6 [0.693] 13.8 [0.543] 4.5 [0.177] 5.3 [0.209] 5.3 [0.209] 1.5 [0.059] 1.5 [0.059] 1.5 [0.059] 0.5 [0.020] 0.5 [0.020] 0.5 [0.020] Document Number: 21015 3 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Mounting Accessories for Resistors www.vishay.com Vishay Draloric CERAMIC CENTERING DISCS (KER 221 DIN 40685) To increase the leakage path (creeping distance) when assembling resistors with through-pin. D1 d1 2 d b Da a PART NUMBER SUITABLE FOR 405 499 BN 117 ORDER REF. DIMENSIONS in millimeters [inches] Da Di d d1 a b CDISCCER00405499 GWS 25, GWS 35, GWS 50, GWS 75, RW12/.. ZWS 12, ZWS 15, ZWS 20, ZWS 35 10 [0.394] 5.2 [0.205] 3.2 [0.126] - 6.5 [0.256] 5 [0.197] 401 182 BN 117 CDISCCER00401182 GWS 100, GWS 220, GWS 300, ZWS 50, ZWS 100, ZWS 150, ZW 20/.. 20 [0.787] 9.5 [0.374] 5 [0.197] 10 [0.394] 10 [0.394] 5 [0.197] 401 183 BN 117 CDISCCER00401183 GWS 30/..., GBS 30/..., ZWS 30/..., ZBS 30/... 30 [1.181] 13.5 [0.531] 6 [0.236] 12 [0.472] 10 [0.394] 5 [0.197] 401 184 BN 117 CDISCCER00401184 GWS 500, RW 30/.. 30 [1.181] 17.3 [0.681] 6 [0.236] 12 [0.472] 10 [0.394] 5 [0.197] 401 185 BN 117 CDISCCER00401185 ZWS 250 30 [1.181] 19.2 [0.756] 6 [0.236] 12 [0.472] 10 [0.394] 5 [0.197] Ceramic centering discs can be supplied fully assembled with retaining brackets form B and resistors GWS 25 - GWS 30/133, ZWS 12 - ZWS 30/133 which can be delivered completely mounted. CENTERING DISCS (KER 110 DIN 40685) The manufacture of centering discs for resistors of small inside diameter is not feasible. To increase the leakage path (creeping distance) of these types, we supply ceramic discs, centered together with the resistors through the retaining pin. d D PART NUMBER SUITABLE FOR 400 840 BN 103 TUBE000000400840 400 848 BN 103 ORDER REF. s DIMENSIONS in millimeters [inches] D d s GWS 15 6 [0.236] 2.3 [0.091] 5 [0.197] TUBE000000400867 GWS 20, ZWS 8 8 [0.315] 3.5 [0.138] 5 [0.197] 400 867 BN 103 TUBE000000400848 GWS 25, GWS 35, ZWS 12, ZWS 15 10 [0.394] 5.5 [0.217] 5 [0.197] 400 875 BN 103 TUBE000000400875 GWS 50, GWS 75, RW 12/..., ZWS 20, ZWS 35 13 [0.512] 5.5 [0.217] 5 [0.197] Revision: 31-Mar-17 Document Number: 21015 4 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000