BTB Jumper INTERCONNECT 10-9296 Developed in conjunction with the 2.5mm STRIPTTM contact from AVX, this new system provides additional mating tolerance absorption over traditional connector systems in linear or coplanar applications. By designing the 709296001025016 contact without a wire stop, the pin header is allowed to pass straight thru the contacts until the final seating/mating dimension is achieved. Allowing for internal pin clearance, boards and modules can be plugged together without worrying about potentially critical tolerance stack-up issues. APPLICATIONS FEATURES AND BENEFITS * Designed to mate with 709296001025016 horizontal PCB contact * Single and dual pin connections between linear PCB's * 38mm pin allows for modules to be connected where the PCB is recessed within the plastic housing. * Absorption of PCB and module mating tolerances by allowing the unrestricted pin to pass through the contact by eliminating the traditional wire stop * Two different pin lengths to accommodate board-to-board and module-to-module connections * The unique geometry of the insulator lends itself to water tightness when matched with a corresponding housing cavity ELECTRICAL ENVIRONMENTAL MECHANICAL * Current Rating: 9 Amps * Operating Temperature: -40C to +105C * Insulator Material: Glass-Filled Nylon PA-66; UL94V0 * Contact Material: Brass * Plating: Lead-Free Tin Over Nickel * Durability: 3 Cycles * Voltage Rating: 300V (based on contact spacing) HOW TO ORDER 10 9296 00X XXX 9 06 Prefix 10 = Plug Series Number of Ways 001 = 1 Way 002 = 2 Way Pin Length 260 = 26mm 381 = 38mm Color Plating Option Pure Tin 132 081618 BTB Jumper INTERCONNECT 10-9296 1 PIN JUMPER HEADER FOR SERIES 9296 Part Number Dim. A Dim. B 10-9296-001-260-906 26.0 10.45 10-9296-001-381-906 38.15 16.525 081618 133 BTB Jumper INTERCONNECT 10-9296 2 PIN JUMPER HEADER FOR SERIES 9296 Part Number Dim. A Dim. B 10-9296-002-260-906 26.0 10.45 10-9296-002-381-906 38.15 16.525 134 081618