Notice for TAIYO YUDEN products 1 Please read this notice before using the TAIYO YUDEN products. Product information in this catalog is as of October 2008. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. INFORMATION ON THE GENERAL CATALOG REMINDERS Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ). It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel. Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. Should you have any question or inquiry on this matter, please contact our sales staff. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 3 HIGH VALUE MULTILAYER CERAMIC CAPACITORS Code Temp.characteristics Operating temp. range B -2585 BJ X5R* -5585 B7 X7R -55125 OPERATING TEMP. F -2585 F Y5V -3085 *X7R *We may provide X7R for some items according to the individual specification. FEATURES The use of Nickel(Ni) as material for both the internal and external electrodes improves the solderability and heat resistance characteristics. This almost completely eliminates migration and raises the level of reliability significantly. Low equivalent series resistance(ESR) provides excellent noise absorption characteristics. Compared to tantalum or aluminum electrolytic capacitors these ceramic capacitors offer a number of excellent features, including: Higher permissible ripple current values Smaller case sizes relative to rated voltage Improved reliability due to higher insulation resistance and breakdown voltage. Ni ESR APPLICATIONS LSIICOP DC-DC 2 General digital circuit Power supply bypass capacitors Liquid crystal modules Liquid crystal drive voltage lines LS I, I C, converters(both for input and output) Smoothing capacitors DC-DC converters (both for input and output) Switching power supplies (secondary side) ORDERING CODE 1 3 5 7 9 VDC A J L E T G U 4 6.3 10 16 25 35 50 K 4 EIALxW mm 1070603 2120805 3161206 3251210 1.6x0.8 2.0x1.25 3.2x1.6 3.2x2.5 2 M F - 80 -20 Z mm 6 K A D F G H L N Y M 47,000 1,000,000 10 8 pF 473 105 10 20 K M B X5R X7R F Y5V BJ B7 T 0.45 0.8 0.85 1.15 1.25 1.5 1.6 1.9 2.0max 2.5 P 178mm 4mm 178mm 4mm,1000/ 325 M 11 J M K 3 1 6 B J 1 0 6 M L _ T 1 2 3 4 8 7 10 9 1 3 5 7 9 Rated voltage VDC End termination Temperature characteristics code Capacitance tolerance Special code A J L E T G U 4 6.3 10 16 25 35 50 K Plated F Dimensions case size mm 1070603 2120805 3161206 3251210 1.6x0.8 2.0x1.25 3.2x1.6 3.2x2.5 Series name M BJ B7 4 2 44 6 5 Blank space B X5R X7R F Y5V K M Z K A D F G H L N Y M 6 47,000 1,000,000 9 - Standard products 10 Packaging Thickness mm Multilayer ceramic capacitors 80 -20 8 Nominal capacitancepF example 473 105 10 20 11 0.45 0.8 0.85 1.15 1.25 1.5 1.6 1.9 2.0max 2.5 T P 178mm Taping 4mm pitch All types 178mm Taping 4mm pitch,1000pcs/reel 1210Type ThicknessM 11 Internal code Standard products Blank space Please read the "Notice for TAIYO YUDEN products" before using this catalog. EXTERNAL DIMENSIONS TypeEIA L MK107 (0603) MK212 0805 2.00.10*1,*3 0.0790.004 MK316 (1206) 1.60.15*3 0.1260.006 0.0630.006 2.50.20*2 0.0980.008 3.20.30 0.1260.012 e K A 0.350.25 0.0140.010 K D 0.50.25 0.0200.010 G D F G 0.35 0.50000 -0.25 0.0200.014 -0.010 4 L CAPACITORS T 0.450.05 0.0180.002 0.80.10 *3,*4 0.0310.004 0.450.05 0.0180.002 0.850.10 0.0330.004 1.250.10 *1,*3 0.0490.004 0.850.10 0.0330.004 1.150.10 0.0450.004 1.250.10 0.0490.004 1.60.20 0.0630.008 0.850.10 0.0330.004 1.150.10 0.0450.004 1.50.10 0.0590.004 1.90.20 0.0750.008 1.9 0.1 -0.2 0.0750.004 -0.008 1.250.10*1,*3 0.0490.004 3.20.15*3 MK325 (1210) 1. 0.15mm 2. 0.3mm 3. 0.2mm 4. 0.15/-0.1mm Note: 1. Inclulding dimension tolerance0.15mm0.006 inch . Note: 2. Inclulding dimension tolerance0.3mm0.012 inch . Note: 3. Inclulding dimension tolerance0.2mm0.008 inch . Note: 4. Inclulding dimension tolerance0.15/-0.1mm0.006/-0.004 inch . W 1.60.10*3,*4 0.80.10*3,*4 0.0630.004 0.0310.004 D F H N 0.60.3 0.0240.012 Y 2.50.20 *2 0.0980.008 M Unitmm inch AVAILABLE CAPACITANCE RANGE Type 107 212 316 325 TC B/X7R B/X5R X5R F/Y5V B/X7R B/X5R X5R F/Y5V B/X7R B/X5R X5R F/Y5V B/X7R B/X5R X5R F/Y5V 6.3 35 25 16 10 6.3 10 6.3 4 50 25 16 10 50 35 25 16 10 50 35 25 16 10 6.3 50 25 16 10 6.3 50 16 10 6.3 50 25 16 10 6.3 50 25 16 10 6.3 50 25 10 6.3 4 35 25 16 10 25 16 10 35 25 16 10 6.3 50 35 16 10 6.3 16 10 6.3 Cap VDC 16 10 F3[digits] 0.1 104 0.15 154 0.22 224 A A 0.33 334 A 0.47 474 0.68 684 1 105 A A 2.2 225 3.3 335 4.7 475 6.8 685 10 106 22 226 47 476 100 107 G G A A A A A A G G A A A A A A G A A A A A A A A A A A A G G G G G G G G A A G B7 F G L L G L L L L L L G G G G G G L L L G G N L L L L L L N N N L L L L L L L L L L L N L N N N M N N N M.N N N M M M.Y Y L L L L N N M M M.N M M.Y N Note : Letters in the table indicate thickness. Low profile Multilayer Ceramic Capacitors 212 316 325 B/X5R X5R F/Y5V B/X7R B/X5R X5R F/Y5V B/X7R B/X5R F/Y5V 25 16 10 10 6.3 4 50 10 6.3 25 16 25 16 10 6.3 25 16 10 6.3 50 35 10 6.3 50 25 50 25 16 10 50 35 10 D F D D D D D D F D F D D D D D K K D H G D D K D D BJ L G G G G G G Temp.char.Code G A A A Type 107 X5R B/X7R TC B/X5R Cap VDC 10 6.3 25 16 10 6.3 4 16 10 F3[digits] 0.1 104 0.22 224 0.33 334 K D 0.47 474 0.68 684 1 105 K K K K D D 2.2 225 K K K 3.3 335 K K 4.7 475 6.8 685 10 106 22 226 47 476 G G G G G G G L D D D D H H H D D H G D F F D D D D D D D D H F Note : Letters in the table indicate thickness. Temperature characteristics Applicable standard B X5R X7R F Y5V JIS EIA EIA JIS EIA Temperature range Ref. Temp. -2585 -5585 -55125 -2585 -3085 20 25 25 20 25 tan % Capacitance tolerance Dissipation factor Capacitance change 10 15 15 30/-80 22/-82 10 K 20 M 2.5 max.* 80 Z -20 7.0 max.* **The figure indicates typical value. Please refer to PART NUMBERS table. Selection Guide P.12 Part Numbers Electrical Characteristics P.46 P.54 Packaging Reliability Data P.98 P.102 etc 9 Precautions P.108 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 45 107TYPE Temp.char. Rated Voltage 35V 25V PART NUMBERS BJ:B/X5R EHS Environmental Hazardous Substances Ordering code RoHS 1 B/X5R 5 TMK107 BJ105K* 1 RoHS 1 X5R 10 TMK107 BJ224A RoHS 0.22 B/X5R 3.5 RoHS 0.47 B/X5R 3.5 1 RoHS 1 B/X5R 5 1 EMK107 BJ105K* RoHS 1 X5R 10 R EMK107 BJ224A RoHS 0.22 B/X5R* 3.5 R/W EMK107 BJ474A RoHS 0.47 B/X5R 0.80.1 3.5 0.80.1 0.80.1 B/X5R 5 B/X5R 10 1 RoHS 1 B/X5R 10 LMK107 BJ225K* 1 RoHS 2.2 X5R LMK107 BJ224A RoHS 0.22 B/X5R* 2 3.5 LMK107 BJ474A RoHS 0.47 B/X5R* 2 3.5 0.80.1 1 RoHS 1 B/X5R* 2 5 0.80.1 1 RoHS 2.2 B/X5R 10 0.80.1 1 RoHS RoHS 4.7 0.47 X5R B/X5R 10 5 0.80.1 0.450.05 1 RoHS 1 B/X5R 10 0.450.05 1 RoHS 2.2 X5R 10 1, 3 RoHS 4.7 X5R 10 1 RoHS 2.2 B/X5R 10 1 RoHS 4.7 X5R 10 X5R JMK107 BJ225K* JMK107 BJ475MK* * JMK107 BJ225A* JMK107 BJ475A* 1, 3 JMK107 BJ106MA* 10 20% 0.80.15/-0.1 10% 20% 0.450.05 2.2 X5R 10 RoHS 4.7 X5R 10 1 RoHS 10 X5R 10 RoHS 22 X5R 10 Temp.char. 0.450.05 0.80.1 RoHS *1 1.5 *2 X7R *3 0.80.1 10% 20% 1 * 0.450.05 R/W 10 AMK107 BJ225K* 1, 3 0.80.1 0.450.05 0.450.05 RoHS AMK107 BJ226MA* 10% 20% 20% * AMK107 BJ475MK* R 10 1 AMK107 BJ106MA* R 0.80.1 0.450.05 20% 0.80.1 0.80.2 Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. *2 We may provide X7R for some items according to the individual specification. *3 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channel. B7:X7R EHS Environmental Hazardous Substances Ordering code tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F Capacitance tolerance Thickness mm 1 RoHS 0.22 X7R 3.5 R/W 0.80.1 EMK107 B7 105A* LMK107 B7 224A LMK107 B7 474A 1 LMK107 B7 105A* 1 RoHS RoHS RoHS RoHS 1 0.22 0.47 1 X7R X7R X7R X7R 5 3.5 3.5 5 R R/W 0.80.1 0.80.1 0.80.1 0.80.1 JMK107 B7 224A JMK107 B7 474A 1 JMK107 B7 105A* RoHS RoHS RoHS 0.22 0.47 1 X7R X7R X7R 3.5 3.5 5 R/W EMK107 B7 224A* *1 1.5 46 0.80.1 0.450.05 1 JMK107 BJ105K* 6.3V R 2.2 LMK107 BJ475A* JMK107 BJ474K 10V 0.80.1 0.80.1 RoHS LMK107 BJ225A* 16V R/W RoHS LMK107 BJ105A* Rated Voltage 0.80.1 0.450.05 1 LMK107 BJ105K* 4V Thickness mm 1 EMK107 BJ225A* 6.3V 2 Capacitance tolerance R 1 TMK107 BJ474A* EMK107 BJ105A* 10V tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 1 GMK107 BJ105A* TMK107 BJ105A* 16V GeneralLow profile Multilayer Ceramic Capacitors R R 10% 20% 0.80.1 0.80.1 0.80.1 Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. Temp.char. Rated Voltage 50V 25V 10V F:F/Y5V Ordering code EHS Environmental Hazardous Substances UMK107 F104ZA TMK107 F474ZA EMK107 F224ZA EMK107 F474ZA EMK107 F105ZA EMK107 F225ZA LMK107 F105ZA LMK107 F225ZA RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.1 0.47 0.22 0.47 1 2.2 1 2.2 F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V 7 7 7 7 16 16 16 16 9 Capacitance tolerance Thickness mm 80 20% 0.80.1 0.80.1 0.80.1 0.80.1 0.80.1 0.80.1 0.80.1 0.80.1 R/W R Please read the "Notice for TAIYO YUDEN products" before using this catalog. 4 CAPACITORS 16V PART NUMBERS 47 212TYPE Temp.char. Rated Voltage PART NUMBERS BJ:B/X5R EHS Environmental Hazardous Substances Ordering code 35V 25V 0.1 B/X5R* 2 3.5 1.250.1 RoHS 0.22 B/X5R* 2 3.5 1.250.1 1 RoHS 0.47 B/X5R 3.5 UMK212 BJ105G* 1 RoHS 1 X5R 5 GMK212 BJ474G 1 GMK212 BJ105G* RoHS RoHS 0.47 1 B/X5R 2 B/X5R* 3.5 3.5 1.250.1 1.250.1 TMK212 BJ474D TMK212 BJ105D TMK212 BJ105G RoHS RoHS RoHS 0.47 1 1 B/X5R B/X5R B/X5R 3.5 5 5 0.850.1 0.850.1 1.250.1 1 RoHS 2.2 B/X5R 5 1.250.1 TMK212 BJ475G* 1 RoHS 4.7 X5R 10 1.250.15 EMK212 BJ105D EMK212 BJ225D RoHS RoHS 1 2.2 B/X5R B/X5R 5 5 RoHS 4.7 B/X5R UMK212 BJ474G* 1, 3 EMK212 BJ475D* * EMK212 BJ105G RoHS 1 B/X5R* EMK212 BJ225G RoHS 2.2 B/X5R* 2 RoHS 4.7 B/X5R 1 R R/W 10% 20% 0.850.1 0.850.1 0.850.1 3.5 5 1.250.1 1.250.1 5 1.250.15 1, 3 RoHS 10 X5R 10 1.250.15 RoHS 4.7 X5R 10 0.450.05 LMK212 BJ105D RoHS 1 B/X5R* LMK212 BJ225D LMK212 BJ475D RoHS RoHS 2.2 4.7 B/X5R B/X5R LMK212 BJ106D* RoHS 10 X5R LMK212 BJ105G RoHS 1 B/X5R* 2 3.5 LMK212 BJ225G RoHS 2.2 B/X5R* 2 5 1.250.1 LMK212 BJ475G LMK212 BJ106G RoHS RoHS 4.7 10 B/X5R X5R 5 10 1.250.15 1.250.15 RoHS 22 X5R 10 20% 1.250.2 0.450.05 * 1, 3 LMK212 BJ226MG* * 1 JMK212 BJ475K* 1, 3 JMK212 BJ106MK* * 2 3.5 R 0.850.1 5 10 0.850.1 0.850.1 10 0.850.1 R/W 1.250.1 RoHS 4.7 X5R 10 10% 20% RoHS 10 X5R 10 20% 0.450.05 10% 20% 0.850.1 JMK212 BJ475D RoHS 4.7 X5R 10 JMK212 BJ106D RoHS 10 X5R 10 JMK212 BJ226MD* * JMK212 BJ475G JMK212 BJ106G 1, 3 JMK212 BJ226MG* * RoHS RoHS RoHS RoHS 22 4.7 10 22 X5R B/X5R X5R X5R 10 5 10 10 10% 20% 0.850.1 1.250.15 1.250.15 1.250.15 1, 3 RoHS 47 X5R 10 20% 1.250.2 1 RoHS 22 X5R 10 1, 3 JMK212 BJ476MG* * AMK212 BJ226MD* *1 1.5 *2 X7R *3 48 R 1 1 4V 1.250.1 LMK212 BJ475K* EMK212 BJ106G* 6.3V 1.250.1 R/W 10 2 EMK212 BJ475G* 10V Thickness mm RoHS UMK212 BJ224G* TMK212 BJ225G* 16V Capacitance tolerance 1 UMK212 BJ104G 50V tan Dissipation Soldering method Temperature Capacitance factor R: Reflow soldering characteristics %Max. W: Wave soldering F R 20% 0.850.1 0.850.1 Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. *2 We may provide X7R for some items according to the individual specification. *3 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channel. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. Temp.char. Rated Voltage PART NUMBERS B7:X7R EHS Environmental Hazardous Substances Ordering code UMK212 B7 104G 50V tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.1 X7R 3.5 RoHS 0.22 X7R 3.5 1 RoHS 0.47 X7R 3.5 1 RoHS 1 X7R 3.5 UMK212 B7 474G* Thickness mm 1.250.1 1.250.1 R/W 1.250.1 35V GMK212 B7 105G* 25V TMK212 B7 105G* 1 RoHS 1 X7R 5 R 1.250.1 16V EMK212 B7 474D EMK212 B7 105D EMK212 B7 105G 1 EMK212 B7 225G* RoHS RoHS RoHS RoHS 0.47 1 1 2.2 X7R X7R X7R X7R 3.5 5 3.5 10 R/W R R/W 0.850.1 0.850.1 1.250.1 LMK212 B7 105D LMK212 B7 105G LMK212 B7 225G RoHS RoHS RoHS 1 1 2.2 X7R X7R X7R 3.5 3.5 5 R/W R 0.850.1 1.250.1 1.250.1 RoHS 4.7 X7R 10 R/W 1.250.15 10V 1 LMK212 B7 475G* *1 1.5 Temp.char. Rated Voltage 50V 16V 10V 6.3V 1.250.1 10% 20% 1.250.1 R 4 CAPACITORS RoHS 1 UMK212 B7 224G* Capacitance tolerance Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. F:F/Y5V Ordering code EHS Environmental Hazardous Substances UMK212 F224ZD UMK212 F474ZG UMK212 F105ZG EMK212 F225ZG LMK212 F225ZD LMK212 F475ZG LMK212 F106ZG JMK212 F475ZD JMK212 F106ZG RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.22 0.47 1 2.2 2.2 4.7 10 4.7 10 F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V 7 7 7 7 9 9 16 16 16 9 Capacitance tolerance Thickness mm 80% 20% 0.850.1 1.250.1 1.250.1 1.250.1 0.850.1 1.250.1 1.250.1 0.850.1 1.250.1 R/W R Please read the "Notice for TAIYO YUDEN products" before using this catalog. 49 316TYPE Temp.char. Rated Voltage 50V PART NUMBERS BJ:B/X5R EHS Environmental Hazardous Substances Ordering code 0.22 B/X5R* 2 2.5 UMK316 BJ474L RoHS 0.47 B/X5R* 2 3.5 UMK316 BJ105L RoHS 1 B/X5R* 2 3.5 1.60.2 UMK316 BJ475L* RoHS 4.7 X5R 10 1.60.2 TMK316 BJ105D 1 TMK316 BJ225D* RoHS RoHS 1 2.2 B/X5R B/X5R 3.5 3.5 0.850.1 0.850.1 TMK316 BJ475D* 1 RoHS 4.7 X5R TMK316 BJ225L RoHS 2.2 B/X5R* 1 RoHS 4.7 B/X5R 5 TMK316 BJ106L* 1 RoHS 10 X5R 5 EMK316 BJ225D EMK316 BJ475D RoHS RoHS 2.2 4.7 B/X5R X5R 3.5 5 EMK316 BJ106D* RoHS 10 X5R EMK316 BJ105F RoHS 1 B/X5R* EMK316 BJ106F* RoHS 10 X5R EMK316 BJ225L EMK316 BJ475L RoHS RoHS 2.2 4.7 B/X5R* B/X5R 1 RoHS 10 B/X5R 5 EMK316 BJ226ML* 1 RoHS 22 B/X5R 10 20% 1.60.2 LMK316 BJ475D LMK316 BJ106D RoHS RoHS 4.7 10 B/X5R B/X5R 5 10 10% 20% 0.850.1 0.850.1 RoHS 22 X5R 10 20% 0.850.1 RoHS 10 B/X5R 5 10% 20% 1.60.2 RoHS 22 B/X5R 10 RoHS 47 X5R 10 1 1 EMK316 BJ106L* 1, 3 LMK316 BJ226MD* 10V * LMK316 BJ106L 1 LMK316 BJ226ML* 1, 3 LMK316 BJ476ML* * JMK316 BJ106D JMK316 BJ476ML* 4V 50V 25V 10V 6.3V R/W 1.60.2 RoHS 47 X5R 10 RoHS RoHS 10 22 B/X5R* B/X5R RoHS 47 X5R 10 RoHS 100 X5R 10 1 RoHS 100 X5R 10 * B7:X7R EHS Environmental Hazardous Substances Ordering code UMK316 B7 224L UMK316 B7 474L UMK316 B7 105L TMK316 B7 224F TMK316 B7 105L TMK316 B7 225L 1.60.2 1.60.2 20% R 10% 20% 20% 10% 20% 5 10 1, 3 1.60.2 1.60.2 0.850.1 0.850.1 0.850.1 1.60.2 1.60.2 1.60.2 20% 1.60.2 1.60.2 Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. *2 We may provide X7R for some items according to the individual specification. *3 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channel. tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F Capacitance tolerance Thickness mm RoHS RoHS RoHS RoHS RoHS RoHS 0.22 0.47 1 0.22 1 2.2 X7R X7R X7R X7R X7R X7R 2.5 3.5 3.5 2.5 3.5 3.5 RoHS RoHS RoHS 10 1 2.2 X7R X7R X7R 10 3.5 3.5 1 RoHS RoHS RoHS 10 2.2 4.7 X7R X7R X7R 10 3.5 5 R R/W 1.60.2 1.60.2 1.60.2 LMK316 B7 106L* 1 RoHS 10 X7R 5 R 1.60.2 JMK316 B7 106L RoHS 10 X7R 5 TMK316 B7 106L* EMK316 B7 105F EMK316 B7 225L EMK316 B7 106L* LMK316 B7 225L LMK316 B7 475L *1 1.5 50 3.5 5 1, 3 1 16V 1.150.1 10 *1 1.5 *2 X7R *3 Rated Voltage 1.150.1 R 10 3 0.850.1 10 X5R 2 1.60.2 0.850.1 0.850.1 R/W B/X5R AMK316 BJ107ML* Temp.char. 2 1.60.2 3.5 10 JMK316 BJ107ML* 1.60.2 10 2 22 JMK316 BJ106L JMK316 BJ226L R 10% 20% RoHS * * 1.60.2 0.850.1 3.5 RoHS JMK316 BJ476MD* 1.60.2 R/W 5 2 1, 3 JMK316 BJ226MD* 6.3V Thickness mm RoHS TMK316 BJ475L* 16V Capacitance tolerance UMK316 BJ224L 1 25V tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 1.60.2 1.60.2 1.60.2 1.150.1 1.60.2 1.60.2 R/W R R/W 10% 20% 1.60.2 1.150.1 1.60.2 1.60.2 Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. Temp.char. Rated Voltage 50V 35V 10V 6.3V EHS Environmental Hazardous Substances Ordering code UMK316 F225ZG GMK316 F475ZG GMK316 F106ZL TMK316 F106ZL EMK316 F106ZL LMK316 F475ZD LMK316 F106ZF LMK316 F226ZL JMK316 F106ZD 325TYPE Temp.char. Rated Voltage F:F/Y5V RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 35V EHS Environmental Hazardous Substances Ordering code R tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F Capacitance tolerance Thickness mm 10% 20% 1.50.1 3.5 1 RoHS 4.7 X5R 5 2.50.2 UMK325 BJ106MM* 1 RoHS 10 X5R 5 2.50.2 GMK325 BJ225MN RoHS 2.2 B/X5R 3.5 1.90.2 1 RoHS 4.7 X5R 10 1.90.2 1 RoHS 10 B/X5R 5 1.90.2 TMK325 BJ106MD* 1 RoHS 10 B/X5R 5 0.850.1 TMK325 BJ225MH RoHS 2.2 B/X5R* 2 3.5 1.50.1 TMK325 BJ335MN RoHS 3.3 B/X5R* 2 3.5 1.90.2 TMK325 BJ475MN RoHS 4.7 B/X5R* 2 3.5 1.90.2 TMK325 BJ106MN RoHS 10 B/X5R 5 1.90.2 RoHS 10 B/X5R 3.5 2.50.2 RoHS 10 B/X5R 5 0.850.1 RoHS 22 B/X5R 10 0.850.1 RoHS RoHS 4.7 10 B/X5R* B/X5R 3.5 3.5 1.90.2 1.90.2 1 RoHS 22 B/X5R 5 1 EMK325 BJ476MM* RoHS 47 X5R 10 2.50.2 LMK325 BJ335MD LMK325 BJ475MD RoHS RoHS 3.3 4.7 B/X5R B/X5R 3.5 5 0.850.1 0.850.1 UMK325 BJ475MM* GMK325 BJ475MN* 1 EMK325 BJ106MD* 1, 3 EMK325 BJ226MD* * EMK325 BJ475MN EMK325 BJ106MN EMK325 BJ226MM* 2 R/W R 20% 4 2.50.2 1 RoHS 10 B/X5R 5 0.850.1 LMK325 BJ226MY * 1 RoHS 22 B/X5R 5 1.90.1/0.2 LMK325 BJ106MN RoHS 10 B/X5R* 3.5 1.90.2 LMK325 BJ226MM RoHS 22 B/X5R 5 2.50.2 LMK325 BJ106MD* 1 LMK325 BJ476MM* 2 RoHS 47 X5R 10 2.50.2 * RoHS RoHS 100 22 X5R B/X5R 10 5 2.50.3 1.90.1/0.2 1, 3 RoHS 100 X5R 10 1.90.1/0.2 1 RoHS 47 X5R 10 1.90.2 1 RoHS 47 X5R 10 2.50.2 1 RoHS 100 X5R 10 2.50.3 1, 3 LMK325 BJ107MM* JMK325 BJ226MY JMK325 BJ107MY * 6.3V 80% 20% 1.250.1 1.250.1 1.60.2 1.60.2 1.60.2 0.850.1 1.150.1 1.60.2 0.850.1 R/W B/X5R*2 1 10V 7 7 9 9 9 9 16 16 16 1 TMK325 BJ106MM* 16V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V Thickness mm RoHS GMK325 BJ106MN* 25V 2.2 4.7 10 10 10 4.7 10 22 10 Capacitance tolerance BJ:B/X5R UMK325 BJ105H 50V tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F CAPACITORS 25V 16V PART NUMBERS * JMK325 BJ476MN* JMK325 BJ476MM* JMK325 BJ107MM* *1 1.5 *2 X7R *3 Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. *2 We may provide X7R for some items according to the individual specification. *3 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channel. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 51 Temp.char. Rated Voltage 50V 25V 16V 10V PART NUMBERS B7:X7R EHS Environmental Hazardous Substances Ordering code UMK325 B7 105H RoHS 1 X7R 3.5 TMK325 B7 225MH TMK325 B7 335MN RoHS RoHS 2.2 3.3 X7R X7R 3.5 3.5 1 RoHS 4.7 X7R 3.5 TMK325 B7 106MN* 1 RoHS 10 X7R 5 EMK325 B7 475MN LMK325 B7 106MN RoHS RoHS 4.7 10 X7R X7R 3.5 3.5 TMK325 B7 475MN* *1 1.5 Temp.char. Rated Voltage 50V 35V 16V 10V 6.3V 52 tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F R/W Capacitance tolerance Thickness mm 10% 20% 1.50.1 1.50.1 1.90.2 R 20% 1.90.2 1.90.2 1.90.2 1.90.2 Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. F:F/Y5V Ordering code EHS Environmental Hazardous Substances UMK325 F475ZH GMK325 F106ZH EMK325 F226ZN LMK325 F106ZF LMK325 F226ZN JMK325 F476ZN RoHS RoHS RoHS RoHS RoHS RoHS tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 4.7 10 22 10 22 47 F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V 7 7 16 16 16 16 9 R Capacitance tolerance Thickness mm 80 20% 1.50.1 1.50.1 1.90.2 1.150.1 1.90.2 1.90.2 Please read the "Notice for TAIYO YUDEN products" before using this catalog. ELECTRICAL CHARACTERISTICS ESR- Example of Impedance ESR vs. Frequency characteristics (Taiyo Yuden multilayer ceramic capacitor) TMK107BJ105KA 54 AMK107BJ226MA JMK107BJ106MA EMK212BJ105KG EMK212BJ106KG JMK212BJ226MG TMK316BJ106KL JMK316BJ476ML JMK316BJ107ML GMK325BJ106MN EMK325BJ476MM JMK325BJ107MY 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. ELECTRICAL CHARACTERISTICS UMK107F104ZA LMK107F225ZA LMK107F105ZA 4 CAPACITORS UMK212F224ZD UMK212F105ZG LMK212F106ZG UMK316F225ZG GMK316F106ZL LMK316F226ZL UMK325F475ZH GMK325F106ZH JMK325F476ZN 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 55 Class 1 STANDARD MULTILAYER CERAMIC CAPACITORS (CLASS1 : TEMPERATURE COMPENSATING DIELECTRIC TYPE) OPERATING TEMP. -55125 FEATURES Improve Higher Mounting Densities. Multilayer block structure provides higher reliability A wide range of capacitance values available in standard case sizes. APPLICATIONS PHS etc. General electronic equipment Communication equipmentcellular phone, PHS, other wireless applications, etc. ORDERING CODE 1 4 6 7 9 VDC EIA LxW mm pF E T U 04201005 0630201 1050402 16 25 50 2 C D F J K 0.5 1 10 ppm/ C R S T U SL 3 K 0R5 010 100 R 5 M 0.4x0.2 0.6x0.3 1.0x0.5 -150CGCHCJCK -220RH -330SHSJSK G -470TJTK H -750UJUK J 350-1000 K 0.25 0.5 1 5 10 pF pF pF % % - 10 F 8 178mm 2mm mm C P V W 30 60 120 250 0.2 0.3 0.5 0.5 11 U M K 1 0 5 C H 1 0 1 J V _ F 1 3 2 6 5 4 7 9 10 1 4 6 7 9 Rated voltage VDC Dimensionscase size EIALxWmm Nominal capacitance pF Capacitance tolerance Special code E T U Multilayer ceramic capacitor 3 End termination K 0.4x0.2 0.6x0.3 1.0x0.5 Plated example 0R5 010 100 C D F J K 0.5 1 10 *R=decimal point 5 Series name M 04201005 0630201 1050402 16 25 50 2 C R S T U SL -150CGCHCJCK -220RH -330SHSJSK G -470TJTK H -750UJUK J 350-1000 K 0.25 0.5 1 5 10 pF pF pF % % - 11 Standard Products 10 Packaging F 8 Temperature characteristicsppm/ 178mm Taping 2mm pitch Thickness[mm] C P V W 30 60 120 250 Tolerance 56 8 0.2 0.3 0.5 0.5 11 Internal code Standard Products Blank space 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. EXTERNAL DIMENSIONS TypeEIA L W T e 0.10.03 MK042 0.40.02 0.20.02 0.20.02 C 01005 0.0160.0010.0080.0010.0080.001 0.0040.001 0.150.05 MK063 0.60.03 0.30.03 0.30.03 P 0201 0.0240.0010.0120.0010.0120.001 0.0060.002 MK105 1.00.05 0.50.05 0.50.05 0.250.10 0402 0.0390.0020.0200.002 0.0200.002 W, V 0.0100.004 Unitmminch AVAILABLE CAPACITANCE RANGE Type 042 063 Temp.char. C C U C U Cap VDC 16V 25V [ pF ]pF3digits 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 0R5 010 1R5 020 030 040 050 060 070 080 090 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 105 SL R S P 50V W W W W P Temperature Characteristics Temperature char.EIA T W C CAPACITORS 0250 C JC0J 0120 C HC0H 060 C GC0G 030 R HR2H -22060 S KS2K -330250 S JS2J -330120 S HS2H -33060 T KT2K -470250 T JT2J -470120 U KU2K -750250 -55125 -750120 -1000350 SL V ppm/1 Temperature coefficient range Operating Temp. range C KC0K U JU2J V 4 120 Based on the capacitance at 20 V Capacitance Tolerance Symbol Symbol Note: Letters in the table indicate thickness. Tolerance Item C 0.25pF 5pF D 0.5 pF 10pF F 1pF 610 pF J 5 % 11pF K 10 % 11pF Q Item Q2 Symbol 40020C1 27pF 1000 30pF 1C Nominal capacitance pF 2 Measurement Frequency= 10.1MHzC1000pF 10.1kHzC1000pF Measurement voltage = 0.55VrmsC1000pF 10.2VrmsC1000pF Selection Guide P.12 etc Part Numbers Electrical Characteristics P.58 Packaging Reliability Data P.98 P.102 9 Precautions P.108 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 57 PART NUMBERS 042TYPE Class 1 Rated Voltage Ordering code DC 16V EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK0 4 2 EMK04 2 EMK04 2 EMK04 2 EMK04 2 EMK04 2 EMK04 2 EMK04 2 EMK04 2 EMK04 2 EHS Temperature characteristicsEIA Environmental Thicknees Hazardous CK CJ CH CG PK PJ PH RK RJ RH SK SJ SH TK TJ TH UK UJ Capacitance Capacitance [mm] SL Substances (C0K) (C0J) (C0H) (C0G) (P2K) (P2J) (P2H) (R2K) (R2J) (R2H) (S2K) (S2J) (S2H) (T2K) (T2J) (T2H) (U2K) ( U2J) tolerance inch [pF] CK 0 R 5C CK 0 1 0C CK 1 R 5C CK 0 2 0C CJ 0 3 0C CH0 4 0C CH0 5 0C CH0 6 0C CH0 7 0C CH0 8 0C CH0 9 0C CH1 0 0C CH1 2 0C CH1 5 0C CH1 8 0C CH2 2 0C CH2 7 0C CH3 3 0C CH3 9 0C CH4 7 0C CH5 6 0C CH6 8 0C CH8 2 0C CH1 0 1C RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 0.25pF 0.5pF 0.5pF 1pF 0.20.02 (0.0080.001) 5% 10% Please specify the capacitance tolerance code. 063TYPE Class 1 Rated Voltage Ordering code DC 25V TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 TMK0 6 3 0 R 5 P 0 1 0 P 1 R 5 P 0 2 0 P 0 3 0 P 0 4 0 P 0 5 0 P 0 6 0 P 0 7 0 P 0 8 0 P 0 9 0 P 1 0 0 P 1 2 0 P EHS Temperature characteristicsEIA Environmental Thicknees Hazardous CK CJ CH CG PK PJ PH RK RJ RH SK SJ SH TK TJ TH UK UJ Capacitance Capacitance [mm] SL tolerance inch Substances (C0K) (C0J) (C0H) (C0G) (P2K) (P2J) (P2H) (R2K) (R2J) (R2H) (S2K) (S2J) (S2H) (T2K) (T2J) (T2H) (U2K) ( U2J) [pF] 1 5 0 P C H 1 8 0 P C H 2 2 0 P C H 2 7 0 P C H 3 3 0 P C H 3 9 0 P C H 4 7 0 P C H 5 6 0 P C H 6 8 0 P C H 8 2 0 P C H 1 0 1 P RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 0.25pF 0.5pF 0.5pF 1pF 0.30.03 (0.0120.001) 5% 10% Please specify the temperature characteristics code and the capacitance tolerance code. 58 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. PART NUMBERS 105TYPE Class 1 Rated Voltage Ordering code (DC) 0R5W 0 1 0W 1R5W 0 2 0W 0 3 0W 0 4 0W 0 5 0W 0 6 0W 0 7 0W 0 8 0 0 9 0 1 0 0 1 2 0 1 5 0 1 8 0 2 2 0 V 2 7 0 V 3 3 0 V 3 9 0 V 4 7 0 V 5 6 0 V 6 8 0 V 8 2 0 V 1 0 1 V 1 2 1 V 1 5 1 V 1 8 1 V 2 2 1 V 2 7 1 V 3 3 1 V SL 1 2 1 V SL 1 5 1 V SL 1 8 1 V SL 2 2 1 V SL 2 7 1 V SL 3 3 1 V RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 120 150 180 220 270 330 4 0.25pF 0.5pF CAPACITORS 50V UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 EHS Temperature characteristics (EIA) (Environmental Thicknees Hazardous CK CJ CH CG PK PJ PH RK RJ RH SK SJ SH TK TJ TH UK UJ Capacitance Capacitance [mm] SL tolerance Substances) (C0K) (C0J) (C0H) (C0G) (P2K) (P2J) (P2H) (R2K) (R2J) (R2H) (S2K) (S2J) (S2H) (T2K) (T2J) (T2H) (U2K) ( U2J) (inch) [pF] 0.5pF 1pF 0.50.05 (0.0200.002) 5% 10% CH VUJ W Please specify the temperature characteristics code. Please specify the capacitance tolerance code. comes to V when is CH and W when is UJ . 105TYPE Class 1 Rated Voltage Ordering code (DC) 50V UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 UMK10 5 EHS Temperature characteristics (EIA) (Environmental Thicknees Hazardous CK CJ CH CG PK PJ PH RK RJ RH SK SJ SH TK TJ TH UK UJ Capacitance Capacitance [mm] SL tolerance Substances) (C0K) (C0J) (C0H) (C0G) (P2K) (P2J) (P2H) (R2K) (R2J) (R2H) (S2K) (S2J) (S2H) (T2K) (T2J) (T2H) (U2K) ( U2J) (inch) [pF] 0 R 5 BW 0 1 0 BW 1 R 2 BW 1 R 5 BW 1 R 8 BW 2R2 J W 2R7 J W 3R3 J W 3R9 J W 4R7 J W 5R6 J W 6R8 J W 8R2 J W 1 0 0 JW 1 2 0 JW 1 5 0 JW 1 8 0 JW 2 0 0 JW RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.5 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 20 0.1pF 0.50.05 (0.0200.002) 5% Please specify the temperature characteristics code. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 59 Class 2 STANDARD MULTILAYER CERAMIC CAPACITORS (CLASS2 :HIGH DIELECTRIC CONSTANT TYPE) Code Temp.characteristics B BJ X5R* B7 X7R OPERATING TEMP. F F Y5V Operating temp. range -2585 -5585 -55125 -2585 -3085 *X7R/X7S *We may provide X7R/X7S for some items according to the individual specification. FEATURES Improve Higher Mounting Densities. Multilayer block structure provides higher reliability A wide range of capacitance values available in standard case sizes. APPLICATIONS PHS etc. General electronic equipment Communication equipment (cellular phone, PHS, other wireless applications, etc.) ORDERING CODE 1 4 6 7 9 VDC EIA LxW mm pF A J L E T G U 4 6.3 10 16 25 35 50 042(01005) 063(0201) 105(0402) 102 223 1000 22000 B7 F 3 Z 80 % -20 - 10 C P V B X5R X7R F Y5V BJ 10% 20% mm 2 K M 8 5 M 0.4x0.2 0.6x0.3 1.0x0.5 F 0.2 0.3 0.5 178mm 2mm 11 K L M K 1 0 5 B J 1 0 4 K V _ F 3 2 1 4 5 6 7 9 10 1 4 6 7 9 Rated voltage VDC Dimensions (case size)LxWmm Nominal capacitance pF Capacitance tolerance Special code A J L E T G U 4 6.3 10 16 25 35 50 2 042(01005) 063(0201) 105(0402) M 3 example 102 223 1000 22000 10% 20% Z 80 % -20 Thickness mm F Blank space B X5R X7R F Y5V - 11 Standard products 10 Packaging Temperature characteristics code C P V 0.2 0.3 0.5 F 178mm Taping (2mm pitch) 11 Internal code Standard Products Blank space End termination K K M 8 B7 Multilayer ceramic capacitor 0.4x0.2 0.6x0.3 1.0x0.5 5 BJ Series name 60 8 Plated 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. EXTERNAL DIMENSIONS TypeEIA L W T MK042 0.40.02 0.20.02 0.20.02 01005 0.0160.0010.0080.001 0.0080.001 MK063 0.60.03 0.30.03 0.30.03 0201 0.0240.0010.0120.001 0.0120.001 MK105 1.00.051 0.50.051 0.50.051 0402 0.0390.0020.0200.002 0.0200.002 : e 0.10.03 0.0040.001 0.150.05 0.0060.002 0.250.10 0.0100.004 Unitmminch C P V 1 0.1mm 4 Note: 1. Inclulding dimension tolerance0.1mm CAPACITORS AVAILABLE CAPACITANCE RANGE General Multilayer Ceramic capacitors Type Temp.char. VDC 042 B/X5R 063 105 B/X5R X5R B/X7R Cap 10V 6.3V 25V 16V 10V 10V 6.3V 4V pF pF3digits 101 151 221 331 471 681 102 152 222 332 472 682 103 153 223 333 473 683 104 224 334 474 105 225 335 475 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 15000 22000 33000 47000 68000 100000 220000 330000 470000 1000000 2200000 3300000 4700000 C B/X5R X5R F/Y5V 50V 25V 16V 50V 35V 25V 16V 10V 6.3V 10V 6.3V 4V 50V 25V 16V 10V 6.3V P V P V C P V V P V V P P V P V P V V V V V P V V V V V V V :Note : Letters in the table indicate thickness. Temp.char.Code B/BJ B7 F Temperature characteristics Applicable standard B X5R X7R F Y5V JIS EIA EIA JIS EIA Temperature range Ref. Temp. -2585 -5585 -55125 -2585 -3085 20 25 25 20 25 tan % Capacitance tolerance Dissipation factor Capacitance change 10 15 15 30/-80 22/-82 10 K 20 M 2.5 max.* 80 Z -20 7.0 max.* * *The figure indicate typical value. Please refer to PART NUMBERS table. Selection Guide P.12 etc Part Numbers Electrical Characteristics P.62 Packaging Reliability Data P.98 P.102 9 Precautions P.108 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 61 PART NUMBERS 042TYPE 01005 case size Temp.char. BJ:B/X5R Rated Voltage 10V EHS Environmental Hazardous Substances Ordering code LMK042 BJ101 C LMK042 BJ151 C LMK042 BJ221 C LMK042 BJ331 C LMK042 BJ471 C LMK042 BJ681 C LMK042 BJ102 C RoHS RoHS RoHS RoHS RoHS RoHS RoHS 100 150 220 330 470 680 1000 1 RoHS 1500 1 RoHS 2200 1 RoHS 3300 1 RoHS 4700 1 RoHS 6800 1 RoHS 10000 JMK042 BJ152 C* JMK042 BJ222 C* 6.3V tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering pF JMK042 BJ332 C* JMK042 BJ472 C* JMK042 BJ682 C* JMK042 BJ103 C* *1 1.5 *2 X7R/X7S Capacitance tolerance Thickness mm inch 10% 20% 0.2 0.02 0.008 0.001 5 B/X5R* 2 R 10 Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. *2 We may provide X7R/X7S for some items according to the individual specification. 063TYPE 0201 case size Temp.char. BJ:B/X5R Rated Voltage 25V 16V 10V EHS Environmental Hazardous Substances Ordering code TMK063 BJ101P TMK063 BJ151P TMK063 BJ221P TMK063 BJ331P TMK063 BJ471P TMK063 BJ681P TMK063 BJ102P EMK063 BJ152P EMK063 BJ222P EMK063 BJ332P LMK063 BJ472P LMK063 BJ682P LMK063 BJ103P 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 7.5 7.5 1 RoHS 100000 10 1 RoHS 47000 7.5 1 RoHS 100000 RoHS 220000 1 RoHS 220000 1, 3 RoHS 330000 RoHS 470000 * AMK063 BJ224MP* AMK063 BJ334MP* * 1, 3 AMK063 BJ474MP* * *1 1.5 *2 X7R *3 0.30.03 0.012 0.001 R 47000 1, 3 10% 20% 5 22000 JMK063 BJ104P* Thickness mm inch 2 RoHS JMK063 BJ224MP* 62 B/X5R* RoHS JMK063 BJ473P* Capacitance tolerance 3.5 1 LMK063 BJ104P* 4V RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1 LMK063 BJ223P* LMK063 BJ473P* 6.3V tan Dissipation Soldering method Temperature Capacitance factor R: Reflow soldering characteristics %Max. W: Wave soldering pF X5R 10 20% Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. *2 We may provide X7R for some items according to the individual specification. *3 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channel. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. PART NUMBERS 105TYPE 0402 case size Temp.char. BJ:B/X5R Rated Voltage EHS Environmental Hazardous Substances Ordering code tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering pF RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 220 330 470 680 1000 1500 2200 3300 4700 6800 35V UMK105 BJ103V 1 GMK105 BJ104V * RoHS RoHS 10000 100000 25V TMK105 BJ682V TMK105 BJ103V TMK105 BJ153V TMK105 BJ223V RoHS RoHS RoHS RoHS 6800 10000 15000 22000 1 RoHS 33000 1 RoHS 47000 TMK105 BJ104V * 1 RoHS 100000 EMK105 BJ333V EMK105 BJ473V EMK105 BJ683V RoHS RoHS RoHS 33000 47000 68000 1 RoHS 100000 EMK105 BJ224V * 1 RoHS 220000 LMK105 BJ104V 1 LMK105 BJ224V * RoHS RoHS 100000 220000 1 RoHS 470000 1 RoHS 1000000 1 RoHS 220000 1 RoHS 470000 1 RoHS 1000000 1, 3 * 1, 3 AMK105 BJ335MV * * RoHS 2200000 RoHS 3300000 1, 3 RoHS 4700000 50V TMK105 BJ333V * TMK105 BJ473V * 16V EMK105 BJ104V * 10V LMK105 BJ474V * LMK105 BJ105V * JMK105 BJ224V * 6.3V JMK105 BJ474V * JMK105 BJ105V * JMK105 BJ225MV * 4V AMK105 BJ475MV * * *1 1.5 *2 X7R *3 Thickness mm inch 4 B/X5R* CAPACITORS UMK105 BJ221V UMK105 BJ331V UMK105 BJ471V UMK105 BJ681V UMK105 BJ102V UMK105 BJ152V UMK105 BJ222V UMK105 BJ332V UMK105 BJ472V 1 UMK105 BJ682V * Capacitance tolerance 2.5 2 3.5 5 B/X5R 2.5 B/X5R* 2 B/X5R B/X5R* 10% 20% 3.5 5 2 R 0.50.05 0.02 0.002 3.5 B/X5R B/X5R* 2 5 B/X5R X5R 10 B/X5R 5 X5R 10 20% 0.50.1 0.02 0.004 Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. *2 We may provide X7R for some items according to the individual specification. *3 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channel. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 63 Temp.char. Rated Voltage 50V PART NUMBERS B7:X7R EHS Environmental Hazardous Substances Ordering code UMK105 B7 221V UMK105 B7 331V UMK105 B7 471V UMK105 B7 681V UMK105 B7 102V UMK105 B7 152V UMK105 B7 222V UMK105 B7 332V RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 4700 1 RoHS 6800 UMK105 B7 103V * 1 RoHS 10000 TMK105 B7 472V TMK105 B7 682V TMK105 B7 103V RoHS RoHS RoHS 4700 6800 10000 UMK105 B7 682V * 1 RoHS 15000 1 RoHS 22000 TMK105 B7 153V * TMK105 B7 223V * 33000 RoHS RoHS RoHS RoHS RoHS 47000 15000 22000 33000 47000 3.5 1 RoHS 100000 5 *1 1.5 Rated Voltage 50V 25V 16V 10V 6.3V Thickness mm inch R 10% 20% 0.50.05 0.02 0.002 Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. F:Y5V Ordering code EHS Environmental Hazardous Substances UMK105 F103ZV TMK105 F223ZV EMK105 F473ZV EMK105 F104ZV LMK105 F224ZV JMK105 F474ZV 1 JMK105 F105ZV * *1 1.5 64 2.5 RoHS EMK105 B7 104V * Temp.char. 3.5 X7R 1 TMK105 B7 473V * EMK105 B7 153V EMK105 B7 223V EMK105 B7 333V EMK105 B7 473V Capacitance tolerance 2.5 1 TMK105 B7 333V * 16V 220 330 470 680 1000 1500 2200 3300 1 UMK105 B7 472V * 25V tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering pF tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering pF RoHS RoHS RoHS RoHS RoHS RoHS 10000 22000 47000 100000 220000 470000 RoHS 1000000 Capacitance tolerance Thickness mm inch 80 20% 0.50.05 0.02 0.002 5 7 9 11 12.5 F/Y5V R 20 *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. MULTILAYER CERAMIC CAPACITORS FOR HIGH FREQUENCY APPLICATIONS(1GHz+) OPERATING TEMP. -55125 FEATURES Q values in the high frequency range (1 GHz+) are excellent compared to other types of multilayer capacitors. The 1005(0402) case size is designed for high density mounting and weight reduction in various applications. Q 1005 APPLICATIONS Q VCOTCXO etc Suitable for those high frequency applications in which a capacitor with both a high Q-value and small size is required such as portable communications and other wireless applications. VCO, TCXO. etc. Adjustment of characteristics in high frequency circuit ORDERING CODE 1 4 6 8 VDC EIALxWmm pF mm E U 16 50 105(0402) 1.0x0.5 020 4R3 10 W 0.5 F 2.3 4.3 178mm 2mm R 2 V 3 7 9 CH RH K 5 ppm/ 6060 -22060212 0.1pF 5 B J U V K 1 0 5 R H 4 R 3 J W _ F 1 2 3 4 5 6 8 1 4 6 Rated voltage VDC Dimensions (case size)LxW mm Nominal capacitance pF E U 16 50 105(0402) 1.0x0.5 7 Thickness mm W example 020 4R3 0.5 2.3 4.3 8 9 10 10 Packaging F 178mm Taping 2mm pitch RDecimal point 2 Series name V M U LT I L AY E R C E R A M I C CAPACITORS FOR HIGH FREQUENCY 3 End termination K 66 5 7 9 Temperature characteristicsppm/ Capacitance tolerance Special code CH RH 6060 -22060212 B J 0.1pF 5 Standard Products Plated 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. EXTERNAL DIMENSIONS Type(EIA) L VK105 1.00.05 W 0.50.05 T e 0.50.05 0.250.1 0402 0.0390.002 0.0200.0020.0200.002 0.0100.004 Unitmminch E: 16V U: 50V EHS Q typ. Q (Environmental Temperature at 1GHz Thickness characteristics Capacitance Capacitance Hazardous [mm] Typical Q Qmin Substances) [pF] tolerance CH RH Ordering code VK105 CH0R3BW VK105 CH0R4BW VK105 CH0R5BW VK105 CH0R6BW VK105 CH0R7BW VK105 CH0R8BW VK105 CH0R9BW VK105 CH010BW VK105 CH1R1BW VK105 CH1R2BW VK105 CH1R3BW VK105 CH1R5BW VK105 CH1R6BW VK105 CH1R8BW VK105 CH020BW VK105 CH2R2JW VK105 CH2R4JW VK105 CH2R7JW VK105 CH030 JW VK105 CH3R3JW VK105 CH3R6JW VK105 CH3R9JW VK105 CH4R3JW VK105 CH4R7JW VK105 CH5R1JW VK105 RH0R5BW VK105 RH0R6BW VK105 RH0R7BW VK105 RH0R8BW VK105 RH0R9BW VK105 RH010 BW VK105 RH1R1BW VK105 RH1R2BW VK105 RH1R3BW VK105 RH1R5BW VK105 RH1R6BW VK105 RH1R8BW VK105 RH020 BW VK105 RH2R2JW VK105 RH2R4JW VK105 RH2R7JW VK105 RH030 JW VK105 RH3R3JW VK105 RH3R6JW VK105 RH3R9JW VK105 RH4R3JW VK105 RH4R7JW VK105 RH5R1JW RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 0.1pF 5 0.1pF 5 300 300 300 300 300 300 300 300 280 270 260 240 230 210 190 180 170 150 130 120 110 99 84 84 84 300 300 300 300 300 300 280 270 260 240 230 210 190 180 170 150 130 120 110 99 84 84 84 0.50.05 1200 1200 1200 1100 1100 1000 950 950 930 850 740 710 670 650 610 530 510 460 390 370 360 360 360 340 320 1100 1000 1000 970 950 900 900 740 700 680 640 620 570 480 470 420 360 350 340 340 340 320 310 CAPACITORS Rated Voltage DC 4 PART NUMBERS Please specify the Rated Voltage code. SPECIFICATIONS Temperature Operating Temperature range Temperature Coefficient range [ppm/] Capacitance Tolerance Characteristics CH RH Selection Guide P.12 etc -55125 Part Numbers Capacitance vs Q value (Typical for CH T.C.) QCH 0.1pF2.0pF 060 -22060 5 2.2pF Electrical Characteristics P.67 P.67 Packaging Reliability Data P.98 9 P.102 Precautions P.108 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 67 CFCAPTM SUPER LOW DISTORTION MULTILAYER CERAMIC CAPACITORS (CFCAPTM) OPERATING TEMP. -55125 FEATURES Newly developed dielectric material and the use of nickel for internal electrodes provide excellent temperature characteristics with high capacitance, small case size and low cost. Low distortion and low shock noise make these capacitors well suited for use in analog or digital mobile devices. Excellent heat-resistance, high break down voltage, and mechanical strength make these capacitors well suited for replacing film capacitors. Ni APPLICATIONS AV PLL Signal line for AV products Analog signal coupling applications PLL circuit of mobile phones Good temperature characteristics for time constant circuits, oscillation circuits and filters ORDERING CODE 1 3 5 7 9 VDC U G T E L 50 35 25 16 10 SD K 10% 6 8 F mm 1.0x0.5 1.6x0.8 2.0x1.25 3.2x1.6 223 104 V A D F G L 0.022 0.1 - 10 4 EIA LxWmm 1050402 1070603 2120805 3161206 2 M K 0.5 0.8 0.85 1.15 1.25 1.6 T F 178mm 4mm 107, 212, 316 178mm 2mm 105 11 T M K 3 1 6 S D 1 0 4 K L _ T 1 6 5 4 3 2 7 8 9 10 1 3 5 7 9 Rated voltage VDC End termination Series symbol Capacitance tolerance Special code U G T E L 50 35 25 16 10 2 Series name M Multilayer ceramic capacitors K Plated SD K Standard 10% 6 8 Nominal capacitanceF Thicknessmm 1.0x0.5 1.6x0.8 2.0x1.25 3.2x1.6 example 223 104 V A D F G L 0.022 0.1 Standard products 10 4 Dimensions(case size)mm 1050402 1070603 2120805 3161206 - 11 Packaging 0.5 0.8 0.85 1.15 1.25 1.6 T F 178mm Taping 4mm pitch 0603, 0805, 1206Type 178mm Taping 2mm pitch 0402Type 11 Internal code Standard products Blank space 68 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. EXTERNAL DIMENSIONS TypeEIA L W T e V A D G F L 0.250.10 0.0100.004 0.350.25 0.0140.010 0.50.25 0.0200.010 0.35 0.500000 -0.25 0.0200.014 -0.010 Unitmm (inch) Cap [F] 0.00039 0.00047 0.00056 0.00068 0.00082 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 Type Temp.Char VDC [pF:3digits] 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 50V AVAILABLE CAPACITANCE RANGE 105 107 212 SD SD SD 25V 16V 10V 50V 25V 16V V V V V 50V 35V SD 16V 10V 35V 25V A A A A A A A V V V V V V V A A D D D D D D A A A A D D G G G A A A A D F F D F F F L L G G G Letters in the table indicate thickness. Series Code Capacitance tolerance tan Dissipation factor 10K SD P.12 10V 316 V V V Selection Guide 4 CAPACITORS MK105 1.00.05 0.50.05 0.50.05 (0402) 0.0390.0020.0200.002 0.0200.002 MK107 1.60.10 0.80.10 0.80.10 (0603) 0.0630.0040.0310.004 0.0310.004 0.850.10 MK212 2.00.10 1.250.10 0.0330.004 (0805) 0.0790.0040.0490.004 1.250.10 0.0490.004 1.150.10 MK316 3.20.15 1.60.15 0.0450.004 (1206) 0.1260.0060.0630.006 1.60.20 0.0630.008 Part Numbers Electrical Characteristics P.70 P.71 0.1max. Packaging Reliability Data P.98 P.72 9 Precautions P.108 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 69 PART NUMBERS 105TYPE0402 case size Rated Voltage 50V 25V 16V 10V Ordering code EHS tan Environmental Temperature Dissipation Soldering method R: Reflow soldering Capacitance Thickness factor Hazardous Capacitance characteristics Standard type % Substances F Max. W: Wave soldering tolerance mm inch UMK1 05 SD3 9 1 K V UMK1 05 SD4 7 1 K V UMK1 05 SD5 6 1 K V T MK1 05 SD6 8 1 K V T MK1 05 SD8 2 1 K V T MK1 05 SD1 0 2 K V T MK1 05 SD1 2 2 K V E MK1 05 SD1 5 2 K V E MK1 05 SD1 8 2 K V E MK1 05 SD2 2 2 K V E MK1 05 SD2 7 2 K V L MK1 05 SD3 3 2 K V L MK1 05 SD3 9 2 K V L MK1 05 SD4 7 2 K V *J 5% RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.00039 0.00047 0.00056 0.00068 0.00082 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 Standard type 0.1 R 10* 0.50.05 0.0200.002 *The product with "J" tolerance of 5% is also available. Please contact our local sales. 107TYPE0603 case size Rated Voltage 50V 25V 16V 10V Ordering code EHS tan Environmental Temperature Dissipation Soldering method R: Reflow soldering Capacitance Thickness factor Hazardous Capacitance characteristics Standard type % Substances F Max. W: Wave soldering tolerance mm inch UMK107 SD1 0 2 K A UMK107 SD1 2 2 K A UMK107 SD1 5 2 K A UMK107 SD1 8 2 K A UMK107 SD2 2 2 K A UMK107 SD2 7 2 K A UMK107 SD3 3 2 K A T MK107 SD3 9 2 K A T MK107 SD4 7 2 K A E MK107 SD5 6 2 K A E MK107 SD6 8 2 K A E MK107 SD8 2 2 K A E MK107 SD1 0 3 K A L MK107 SD1 2 3 K A L MK107 SD1 5 3 K A L MK107 SD1 8 3 K A L MK107 SD2 2 3 K A *J 5% RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 Standard type 0.1 R 0.80.1 10* 0.0310.004 *The product with "J" tolerance of 5% is also available. Please contact our local sales. 212TYPE0805 case size Rated Voltage 50V 35V 16V 10V Ordering code EHS tan Environmental Temperature Dissipation Soldering method R: Reflow soldering Capacitance Thickness Hazardous Capacitance characteristics factor Substances F Max. W: Wave soldering tolerance mm Standard type % inch UMK212 SD3 9 2 KD UMK212 SD4 7 2 KD UMK212 SD5 6 2 KD UMK212 SD6 8 2 KD UMK212 SD8 2 2 KD UMK212 SD1 0 3 KD GMK212 SD1 2 3 KD GMK212 SD1 5 3 KD GMK212 SD1 8 3 KG GMK212 SD2 2 3 KG GMK212 SD2 7 3 KG E MK212 SD3 3 3 KD L MK212 SD4 7 3 KD L MK212 SD6 8 3 KG L MK212 SD8 2 3 KG L MK212 SD1 0 4 KG *J 5% RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.047 0.068 0.082 0.1 0.850.1 0.0330.004 Standard type 0.1 R 10* 1.250.1 0.0490.004 0.850.1 0.0330.004 1.250.1 0.0490.004 *The product with "J" tolerance of 5% is also available. Please contact our local sales. 316TYPE1206 case size Rated Voltage 35V 25V Ordering code GMK3 16 SD3 3 3 K F GMK3 16 SD3 9 3 K F T MK3 16 SD4 7 3 K F T MK3 16 SD5 6 3 K F T MK3 16 SD6 8 3 K F T MK3 16 SD8 2 3 K L T MK3 16 SD1 0 4 K L *J 5% 70 EHS tan Environmental Temperature Dissipation Soldering method factor R: Reflow soldering Capacitance Thickness Hazardous Capacitance characteristics Substances F Max. W: Wave soldering tolerance mm Standard type % inch RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.033 0.039 0.047 0.056 0.068 0.082 0.1 Standard type 0.1 R 10* 1.150.1 0.0450.004 1.60.2 0.0630.008 *The product with "J" tolerance of 5% is also available. Please contact our local sales. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. Capacitance-temperature characteristics 20 15 SD : Standard Type 10 5 0 -5 4 -10 -15 -40 -20 0 20 40 60 80 100 CAPACITORS -20 -60 120 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 71 1/2 RELIABILITY DATA Super Low Distortion Multilayer Ceramic CapacitorsCFCAP Item Specified Value 1.Operating Temperature Range -55 to 125 2.Storage Temperature Range -55 to 125 3.Rated Voltage 10VDC, 16VDC, 25VDC, 35VDC, 50VDC, 4.Withstanding Voltage No breakdown or damage Test Methods and Remarks 4 Applied voltage: Rated voltagex3 Between terminals CAPACITORS Duration: 1 to 5 sec. Charge/discharge current: 50mA max. 5.Insulation Resistance Applied voltage: Rated voltage 10000 M or 500MF, whichever is smaller Duration: 605 sec. Charge/discharge current: 50mA max. 6.CapacitanceTolerance 10% Measuring frequency1Hz10% Measuring voltage10.2Vrms Bias application: None 7.Tangent of Loss Angle 0.1%max Measuring frequency1Hz10% tan Measuring voltage10.2Vrms Bias application: None 8.Resistance to Flexure of Substrate Appearance: No abnormality Warp: 1mm Capacitance change: 5% Speed: 0.5mm/second Duration:10 seconds The measurement shall be made with the board in the bent position. R-230 9. Body strength 10. Adhesion of electrode Applied force: 5N No separation or indication of separation of electrode. Duration: 30 5 seconds Solder temp.: 230 5 11. Solderability At least 95% of terminal electrode is covered by new solder. 12. Resistance to soldering Apppearance: No abnormality Solder temp.: 270 5 Capacitance change: 2.5% max. Duration: 3 0.5 seconds tan: Initial value Preheating conditions: 80 to 100, 2 to 5 min. or 5 to 10 min. Duration: 4 1 seconds Insulation resistance: Initial value 150 to 200, 2 to 5 min. or 5 to 10 min. Withstanding voltagebetween terminals: No abnormality Recovery: Recovery for the following period under the standard condition after the test: 24 2hrs 13. Thermal shock Appearance: No abnormality Conditions for 1 cycle: +0 Capacitance change: 2.5% max Step 1: Minimum operating temperature -3 303 minutes tan: Initial value Step 2: Room temperature Insulation resistance: Initial value Step 3: Maximum operating temperature +3 303 minutes Withstanding voltagebetween terminals: No abnormality Step 4: Room temperature 2 to 3min. -0 2 to 3min. Number of cycles: 5 times Recovery after the test: 242hrs 14. Damp heatsteady state Appearance: No abnormality Temperature:402 Capacitance change: 5% max Humidity:90 to 95% RH tan: 0.5% max Duration:500 +24 hrs Insulation resistance 50MF or 1000M whichever is smaller Recovery: Recovery for the following period under the stan- -0 dard condition after the removal from test chamber: 24 2hrs 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 73 2/2 RELIABILITY DATA Super Low Distortion Multilayer Ceramic CapacitorsCFCAP Item 15.Loading under Damp Heat Specified Value Test Methods and Remarks Appearance: No abnormality According to JIS C 5102 clause 9.9. Capacitance change: 7.5% max Temperature:402 tan0.5% max Humidity:90 to 95% RH Insulation resistance: 25MF or 500M whichever is smaller Duration:500 +24 hrs -0 Charge/discharge current:50mA max Recovery: Recovery for the following period under the standard condition after the removal from test chamber: 242hrs 16.Loading at High Temperature Appearance: No abnormality According to JIS C 5102 clause 9.9. Capacitance change: 3% max Temperature:1253 tan0.35% max Duration:1000 +48 hrs Insulation resistance: 50MF or 1000M whichever is smaller Applied voltage: Rated voltage x 2 CAPACITORS Applied voltage: Rated voltage 4 -0 Recovery: Recovery for the following period under the standard condition after the removal from test chamber: 242hrs Note on standard condition: "standared condition" referred to herein is defined as follows. Temperature: 5 to 35, Relative humidity: 45 to 85 %, Air pressure: 86 to 106kpa, When there are questions concerning measurement results: In order to provide correlation data, the test shall be conducted under condition. Temperature: 202, Relative humidity: 60 to 70 %, Air pressure: 86 to 106kpa Unless otherwise specified,all the tests are conducted under the "standard condition." 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 75 MEDIUM-HIGH VOLTAGE MULTILAYER CERAMIC CAPACITOR Code Temp.characteristics Operating temp. range B -2585 BJ X5R* -5585 OPERATING TEMP. B7 X7R -55125 C7 X7S -55125 *X7R/X7S *We may provide X7R/X7S for some items according to the individual specification. FEATURES Ni The use of Nickel(Ni) as material for internal electrodes almost completely eliminates migration and high reliability Small case sizes with high rated voltage APPLICATIONS DC/DC General telephone exchange Inverter. Wireless and Telecommunication base. For DC/DC Converter ORDERING CODE 1 3 5 7 9 VDC H Q S 100 250 630 BJ B7 C7 4 2 B X5R X7R X7S 1070603 2120805 3161206 3251210 4321812 1.6x0.8 2.0x1.25 3.2x1.6 3.2x2.5 4.5x3.2 10% 20% K M - mm A D G F L N M 6 pF 104 105 10 8 EIA LxWmm M K 100,000 1,000,000 T 0.8 0.85 1.25 1.15 1.6 1.9 2.5 178mm 4mm 11 H M K 3 1 6 B J 1 0 4 K L _ T 1 2 3 4 8 7 10 9 1 3 5 7 9 Rated voltageVDC End termination Temperature characteristics code Capacitance tolerance Special code H Q S 100 250 630 2 Series name M Multilayer ceramic capacitors K Plated BJ B7 C7 4 B X5R X7R X7S K M 1.6x0.8 2.0x1.25 3.2x1.6 3.2x2.5 4.5x3.2 - 11 Standard products 10 Dimensions(case size)mm 1070603 2120805 3161206 3251210 4321812 10% 20% 8 Packaging Thicknessmm A D G F L N M 6 Nominal capacitancepF example 104 105 76 6 5 100,000 1,000,000 9 0.8 0.85 1.25 1.15 1.6 1.9 2.5 T 178mm Taping (4mm pitch) 11 Internal code Standard products Blank space Please read the "Notice for TAIYO YUDEN products" before using this catalog. EXTERNAL DIMENSIONS TypeEIA L W T 1.60.10 0.80.10 0.8 0.10 MK107 0.0630.004 0.0310.004 0.0310.004 (0603) 0.850.10 0.0330.004 1.250.10 2.00.10 0.0790.004 0.0490.004 1.250.10 0.0490.004 MK316 (1206) 1.150.10 0.0450.004 3.20.15 1.60.15 0.1260.006 0.0630.006 1.60.20 0.0630.008 MK325 (1210) 1.150.10 0.0450.004 3.20.3 2.50.20 0.1260.012 0.0980.008 1.90.20 0.0750.008 MK432 (1812) 4.50.4 3.20.30 2.50.20 0.1770.016 0.1260.012 0.0980.008 D G e 0.350.25 0.0140.010 0.50.25 0.0200.010 0.35 0.5-0.25 F L F N M 0.014 0.0200.010 0.60.3 0.0240.012 0.90.6 0.0350.024 4 CAPACITORS MK212 (0805) A Unitmm inch Cap [F] 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 AVAILABLE CAPACITANCE RANGE Type 107 212 316 325 432 Temp. X7R X7S B/X5R X7R B/X5R X7R B/X5R X7R B/X5R X7R B/X5R Char VDC 100V 100V 100V 100V 250V 100V 250V 100V 250V 630V 100V 250V 630V 100V 250V 630V 100V 250V 630V 100V 250V 630V 100V 250V 630V [pF:3digits] 102 A A D D F F 152 A A D D F F 222 A A D D F F 332 A A D D F F 472 A A G G F F 682 A A G G F F 103 A A G G G G F F 153 A A G G G G L L 223 A A G G G G L L N N 333 A A G G L L N N 473 G G L L L L N N N N M M 683 G G L L M M 104 A A G G L L L L F N F N M M M M 154 L L N N 224 G G L L N N N N M M 334 L L M M 474 L L N N M M M M 684 N N 105 L L N N M M 155 M M N N M M 225 Letters in the table indicate thickness. Temp.char.Code BJ B7 C7 Temperature characteristics Applicable standard B X5R X7R X7S JIS EIA EIA EIA Temperature range Ref. Temp. -2585 -5585 -55125 -55125 20 25 25 25 tan % Capacitance tolerance Dissipation factor Capacitance change 10 15 15 22 10 K 20 M 2.5 max.* * *The figure indicates typical value. Please refer to PART NUMBERS table. Selection Guide P.12 Part Numbers Electrical Characteristics P.78 P.83 Packaging Reliability Data P.98 P.84 etc 9 Precautions P.108 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 77 PART NUMBERS 107TYPE 0603 case size Temp.char. BJ:B/X5R Rated Voltage 100V Ordering code EHS Environmental Hazardous Substances HMK107 BJ102A HMK107 BJ152A HMK107 BJ222A HMK107 BJ332A HMK107 BJ472A HMK107 BJ682A HMK107 BJ103A HMK107 BJ153A HMK107 BJ223A HMK107 BJ333A HMK107 BJ104A RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.001 0.0015 0.0022 0.0033 0.0047 2 0.0068 3.5 R B/X5R* 0.01 0.015 0.022 0.033 0.1 Capacitance tolerance Thickness mm inch 10% 20% 0.80.1 0.0310.0041 Please specify the capacitance tolerance code. *2 X7R/X7S *2 We may provide X7R/X7S for some items according to the individual specification. Temp.char. Rated Voltage 100V B7:X7R C7:X7S Ordering code EHS Environmental Hazardous Substances HMK107 B7 102A HMK107 B7 152A HMK107 B7 222A HMK107 B7 332A HMK107 B7 472A HMK107 B7 682A HMK107 B7 103A HMK107 B7 153A HMK107 B7 223A HMK107 B7 333A HMK107 C7 104A 78 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.001 0.0015 0.0022 0.0033 0.0047 X7R 3.5 0.0068 R 0.01 0.015 0.022 0.033 0.1 X7S Capacitance tolerance Thickness mm inch 10% 20% 0.80.1 0.0310.0041 Please specify the capacitance tolerance code. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. PART NUMBERS 212TYPE 0805 case size Temp.char. BJ:B/X5R Rated Voltage 250V EHS Environmental Hazardous Substances HMK212 BJ103G HMK212 BJ153G HMK212 BJ223G HMK212 BJ333G HMK212 BJ473G HMK212 BJ683G HMK212 BJ104G HMK212 BJ224G QMK212 BJ102D QMK212 BJ152D QMK212 BJ222D QMK212 BJ332D QMK212 BJ472G QMK212 BJ682G QMK212 BJ103G QMK212 BJ153G QMK212 BJ223G RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.01 0.015 0.022 0.033 3.5 0.047 0.068 0.1 0.22 2 0.001 R B/X5R* 0.0015 0.0022 0.0033 0.0047 2.5 0.0068 0.01 0.015 0.022 *2 X7R Temp.char. Rated Voltage 100V 250V Capacitance tolerance Thickness mm inch 4 1.250.1 0.0490.004 10% 20% 0.850.1 0.0330.004 CAPACITORS 100V Ordering code 1.250.1 0.0490.004 Please specify the capacitance tolerance code. *2 We may provide X7R for some items according to the individual specification. B7:X7R Ordering code EHS Environmental Hazardous Substances HMK212 B7 103G HMK212 B7 153G HMK212 B7 223G HMK212 B7 333G HMK212 B7 473G HMK212 B7 683G HMK212 B7 104G HMK212 B7 224G QMK212 B7 102D QMK212 B7 152D QMK212 B7 222D QMK212 B7 332D QMK212 B7 472G QMK212 B7 682G QMK212 B7 103G QMK212 B7 153G QMK212 B7 223G RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.01 0.015 0.022 0.033 3.5 0.047 0.068 0.1 0.22 0.001 R X7R 0.0015 0.0022 0.0033 0.0047 2.5 0.0068 0.01 0.015 0.022 Capacitance tolerance Thickness mm inch 1.250.1 0.0490.004 10% 20% 0.850.1 0.0330.004 1.250.1 0.0490.004 Please specify the capacitance tolerance code. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 79 PART NUMBERS 316TYPE 1206 case size Temp.char. BJ:B/X5R Rated Voltage 100V 250V 630V Ordering code EHS Environmental Hazardous Substances HMK316 BJ473L HMK316 BJ104L HMK316 BJ154L HMK316 BJ224L HMK316 BJ334L HMK316 BJ474L HMK316 BJ105L QMK316 BJ333L QMK316 BJ473L QMK316 BJ683L QMK316 BJ104L SMK316 BJ102F SMK316 BJ152F SMK316 BJ222F SMK316 BJ332F SMK316 BJ472F SMK316 BJ682F SMK316 BJ103F SMK316 BJ153L SMK316 BJ223L RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.047 0.1 0.15 0.22 3.5 0.33 0.47 1 0.033 0.047 0.068 2 B/X5R* R 0.1 0.001 0.0015 0.0022 2.5 0.0033 0.0047 0.0068 0.01 0.015 0.022 *2 X7R Temp.char. Rated Voltage 100V 250V 630V Thickness mm inch 1.60.2 0.0630.008 10% 20% 1.150.1 0.0450.004 1.60.2 0.0630.008 Please specify the capacitance tolerance code. *2 We may provide X7R for some items according to the individual specification. B7:X7R Ordering code EHS Environmental Hazardous Substances HMK316 B7 473L HMK316 B7 104L HMK316 B7 154L HMK316 B7 224L HMK316 B7 334L HMK316 B7 474L HMK316 B7 105L QMK316 B7 333L QMK316 B7 473L QMK316 B7 683L QMK316 B7 104L SMK316 B7 102F SMK316 B7 152F SMK316 B7 222F SMK316 B7 332F SMK316 B7 472F SMK316 B7 682F SMK316 B7 103F SMK316 B7 153L SMK316 B7 223L 80 Capacitance tolerance RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.047 0.1 0.15 3.5 0.22 0.33 0.47 1 0.033 0.047 0.068 X7R R 0.1 0.001 0.0015 0.0022 2.5 0.0033 0.0047 0.0068 0.01 0.015 0.022 Capacitance tolerance Thickness mm inch 1.60.2 0.0630.008 10% 20% 1.150.1 0.0450.004 1.60.2 0.0630.008 Please specify the capacitance tolerance code. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. PART NUMBERS 325TYPE 1210 case size Temp.char. BJ:B/X5R Rated Voltage 250V 630V EHS Environmental Hazardous Substances tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F HMK325 BJ104F RoHS 0.1 HMK325 BJ224N HMK325 BJ474N HMK325 BJ684N HMK325 BJ105N HMK325 BJ225N QMK325 BJ473N QMK325 BJ104N QMK325 BJ154N QMK325 BJ224N SMK325 BJ223N SMK325 BJ333N SMK325 BJ473N RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.22 0.47 0.68 1 2.2 0.047 0.1 0.15 0.22 0.022 0.033 0.047 *2 X7R Temp.char. Rated Voltage 100V 250V 630V Capacitance tolerance Thickness mm inch 1.150.1 0.0450.004 3.5 B/X5R* 2 R 10% 20% 1.90.2 0.0750.008 4 CAPACITORS 100V Ordering code 2.5 Please specify the capacitance tolerance code. *2 We may provide X7R for some items according to the individual specification. B7:X7R Ordering code EHS Environmental Hazardous Substances tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F HMK325 B7 104F RoHS 0.1 HMK325 B7 224N HMK325 B7 474N HMK325 B7 684N HMK325 B7 105N HMK325 B7 225N QMK325 B7 473N QMK325 B7 104N QMK325 B7 154N QMK325 B7 224N SMK325 B7 223N SMK325 B7 333N SMK325 B7 473N RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.22 0.47 0.68 1 2.2 0.047 0.1 0.15 0.22 0.022 0.033 0.047 Capacitance tolerance Thickness mm inch 1.150.1 0.0450.004 3.5 R X7R 10% 20% 1.90.2 0.0750.008 2.5 Please specify the capacitance tolerance code. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 81 PART NUMBERS 432TYPE 1812 case size Temp.char. BJ:B/X5R Rated Voltage 100V 250V 630V Ordering code EHS Environmental Hazardous Substances HMK432 BJ474M HMK432 BJ105M HMK432 BJ155M HMK432 BJ225M QMK432 BJ104M QMK432 BJ224M QMK432 BJ334M QMK432 BJ474M SMK432 BJ473M SMK432 BJ683M SMK432 BJ104M RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.47 1 3.5 1.5 2.2 0.1 0.22 R B/X5R*2 0.33 0.47 2.5 0.047 0.068 0.1 *2 X7R Temp.char. Rated Voltage 100V 250V 630V Thickness mm inch 10% 20% 2.50.2 0.0980.008 Please specify the capacitance tolerance code. *2 We may provide X7R for some items according to the individual specification. B7:X7R Ordering code EHS Environmental Hazardous Substances HMK432 B7 474M HMK432 B7 105M HMK432 B7 155M HMK432 B7 225M QMK432 B7 104M QMK432 B7 224M QMK432 B7 334M QMK432 B7 474M SMK432 B7 473M SMK432 B7 683M SMK432 B7 104M RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 82 Capacitance tolerance tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.47 1 3.5 1.5 2.2 0.1 X7R 0.22 R 0.33 2.5 0.47 0.047 0.068 0.1 Capacitance tolerance Thickness mm inch 10% 20% 2.50.2 0.0980.008 Please specify the capacitance tolerance code. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. ELECTRICAL CHARACTERISTICS HMK212BJ104KG/HMK212B7104KG SMK316BJ223KL/SMK316B7223KL QMK325BJ224KN/QMK325B7224KN 4 CAPACITORS HMK325BJ105KN/HMK325B7105KN SMK432BJ104KM/SMK432B7104KM QMK432BJ474KM/QMK432B7474KM - Temperature characteristics HMK325BJ105KN/HMK325B7105KN 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 83 1/2 RELIABILITY DATA MEDIUMHIGH VOLTAGE MULTILAYER CERAMIC CAPACITOR Item Specified Value 1.Operating Temperature Range X7R, X7S:55 to 125 B: 25 to 85 2.Storage Temperature Range X7R, X7S :55 to 125 B: 25 to 85 3.Rated Voltage 100VDC, 250VDC, 630VDC 4.Withstanding Voltage No breakdown or damage Test Methods and Remarks Applied voltage:Rated voltagex2.5100VRated voltagex2250VRated voltagex1.2630V Chage/dischage current50mAmax. 5.Insulation Resistance Applied voltage:Rated voltage100V, 250V500V630V 100M or 10G, whichever is smaller. Duration60sec. Chage/dischage current50mAmax. 6.CapacitanceTolerance 20%10% Measuring frequency:1kHz10% Measuring voltage:10.2Vrms 4 CAPACITORS Duration15sec. Between terminals Bias application:None 7.Tangent of Loss Angel 3.5%max100V . Measuring frequency:1kHz10% 2.5%max250V, 630V. Measuring voltage:10.2Vrms Bias application:None 8.Temperature Characteristic of Capacitance : 10%25 to 85 According to JIS 5102 clause7.12. X7R: 15%55 to 125 Charge of maximum capacitance deviation in step 1 to 5 X7S: 22-55 to 125 Temperature at step 1:+25 Temperature at step 2:minimum operating temperature Temperature at step 3:+25Reference temperature Temperature at step 4:maximum operating temperature Temperature at step 5:+25 Reference temperature Characteristic B shall be +20 9.Resistance to Flexure of Warp:1mm Appearance:No abnormality Capacitance change:Within10% Testing boade:glass epoxyresin substrate Substrate Thickness:1.6mm The measurement shall be made with board in the bent position R-230 10.Adhesion of Electrode Applied force:5N No separation or indication of separation of electrode Duration:305sec. Solder temperature:2305 11.Solderability At least 75% of terminal electrode is covered by solder 12.Resistance to Soldering Appearance:No abnormality Preconditioning:Thermal treatmentat 150 for 1hr Capacitance change:Within15%100V , 10%250V, 630V Solder temperature:2705 tan: Initial value Duration:30.5sec. Insulation resistance:Intial value Preheating conditions: 80 to 100, 2 to 5 min. Duration:41sec. Withstanding voltagebetween terminals : No abnormality 150 to 200, 2 to 5min. Recovery:Rcovery for the following reriod under the standerd condition after the test. 242hrs 13.Thermal shock Appearance:No abnormality Preconditioning:Thermal treatmentat 150 for 1hr Capacitance change:Within15%100V , 7.5%250V, 630V Conditions for 1 cycle tan: Initial value Step 1:Minimum operating temperature 0-3 303min. Insulation resistance:Initial value Step 2:Room temperature 2 to 3min. Step 3:Maximum operating temperature 0-3 303min. Step4:Room temperature 2 to 3min. Number of cycles:5 times Recovery after the test:242hrs 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 85 2/2 RELIABILITY DATA Item 14.Damp Heatsteady state Specified Value Test Methods and Remarks Appearance:No abnormality Preconditioning:Thermal treatmentat 150 for 1hr Capacitance change: Within15% Temperature:402 tan: 7%max100V , 5%max250V, 630V. Humidity90 to 95%RH Insulation resistance:25MF or 1000M Whichever is smaller. Duration: 50024/0 hrs standerd condition after the removal from test chamber. 242hrs 15.Loading under Damp Heat Appearance:No abnormality Preconditioning:Thermal treatmentat 150 for 1hr Capacitance change: Within15% Preconditioning:Voltage treatment tan: 7%max100V , 5%max250V, 630V. Temperature:402 Insulation resistance:10MF or 500M Whichever is smaller. Humidity90 to 95%RH 4 CAPACITORS Recovery:Rcovery for the following reriod under the Applied voltage:Rated voltage Chage/dischage current50mAmax. Duration: 50024/0 hrs Recovery:Rcovery for the following reriod under the standerd condition after the removal from test chamber. 242hrs 16.Loading at High Temperature Appearance:No abnormality According to JIS 5102 clause 9.10. Capacitance change: Within15% Preconditioning:Voltage treatment tan: 7%max100V , 5%max250V, 630V. Temperature:1253X7R, X7S 852BJ Insulation resistance:50MF or 1000M Whichever is smaller. Applied voltage:Rated voltage2100V Rated voltage1.5250V Rated voltage1.2630V Chage/dischage current50mAmax. Duration: 100024/0 hrs Recovery:Rcovery for the following reriod under the standerd condition after the removal from test chamber. As for thermal treatment shall be performed prior to the recovery. 242hrs 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 87 LWLWDCTM LW REVERSAL DECOUPLING CAPACITOR (LWDCTM) Code Temp.characteristics Operating temp. range B -2585 BJ X5R* -5585 B7 X7R -55125 OPERATING TEMP. C6 X6S -55105 C7 X7S -55125 *X6S/X7S/X7R *We may provide X6S/X7S/X7R for some items according to the individual specification. FEATURES Low equivalent series resistanceESR Low equivalent series inductorESL The effect of noise removal in the high frequency The ripple voltage is decreased Small size,High capacitance ESR ESL APPLICATIONS DC-DC, Decoupling capacitors Filtering capacitors ORDERING CODE 1 3 5 7 9 VDC A J 4 6.3 K B7 C6 C7 4 EIA LxWmm 2 1050204 1070306 2120508 W LW BJ 0.52x1.0 0.8x1.6 1.25x2.0 B X5R X7R X6S X7S mm P V A D F 1.0 10.0 10 8 6 105 106 - 10% 20% K M T 0.3 0.5 0.8 0.85 F 178mm 4mm 107, 212 178mm 2mm 105 11 J W K 2 1 2 B J 1 0 6 M D _ T 1 2 4 3 6 5 8 7 10 9 1 3 5 7 9 Rated voltageVDC End termination Temperature characteristics code Capacitance tolerance Special code A J 4 6.3 K Plated 4 Dimensions(case size)mm 2 Series name W LW Reverse Type 1050204 1070306 2120508 0.52x1.0 0.8x1.6 1.25x2.0 BJ B7 C6 C7 B X5R X7R X6S X7S K M Thicknessmm 6 P V A D 1.0 10.0 - Standard products 10 Packaging 8 Nominal capacitanceF example 105 106 10% 20% 11 0.3 0.5 0.8 0.85 T F 178mm Taping 4mm pitch 0306, 0508 Type 178mm Taping 2mm pitch 0204 Type 11 Internal code Standard products Blank space 88 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. EXTERNAL DIMENSIONS Type EIA L W T 0.300.05 WK105 0.520.05 1.000.05 P 0204 0.0200.0020.0390.002 0.0120.002 0.500.05 V 0.0200.002 WK107 0.800.10 1.600.10 0306 0.0310.0040.0630.004 0.800.10 A 0.0310.004 0.850.10 WK212 1.250.15 2.000.15 D 0.0330.004 0508 0.0490.0060.0790.006 4 Unit:mminch Type Cap Temp.Char [F] VDC [pF:3digits] 0.10 104 0.22 224 1.0 105 2.2 225 4.7 475 10.0 106 AVAILABLE CAPACITANCE RANGE 105 X7S 6.3 X6S 4 P BJ B7 C6 C7 107 X5R 6.3 4 X7R 6.3 P V 212 X7S X5R 6.3 4 6.3 4 X6S 6.3 X5R 6.3 D D D D P P V V V V Temp.char.Code CAPACITORS Letters inside the shaded boxes indicate thickness. Temperature characteristics Applicable standard JIS EIA EIA EIA EIA V B X5R X7R X6S X7S Temperature range Ref. Temp. -2585 -5585 -55125 -55105 -55125 20 25 25 25 25 tan % Capacitance tolerance Dissipation factor Capacitance change 10 15 15 22 22 10 K 20 M 10 max.* * *The figure indicates typical value. Please refer to PART NUMBERS table. Selection Guide P.12 Part Numbers Electrical Characteristics P.90 P.91 Packaging Reliability Data P.98 P.102 etc 9 Precautions P.108 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 89 PART NUMBERS 105TYPE 0204 case size Temp.char. BJ:X5R Rated Voltage EHS Environmental Hazardous Substances Ordering code tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 1 RoHS 0.1 1 RoHS 0.22 6.3V JWK105 BJ104MP* 4V AWK105 BJ224MP* X5R* 5 2 10 R Capacitance tolerance Thickness mm inch 20% M 0.30.05 0.0120.002 *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated *1 1.5 *2 X6S/X7S voltage. *2 We may provide X6S/X7S for some items according to the individual specification. Temp.char. Rated Voltage C6:X6S C7:X7S EHS Environmental Hazardous Substances Ordering code tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 1 RoHS 0.1 X7S 5 1 RoHS 0.22 X6S 10 6.3V JWK105 C7 104MP* 4V AWK105 C6 224MP* *1 1.5 R Capacitance tolerance Thickness mm inch 20% M 0.30.05 0.0120.002 *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. 107TYPE 0306 case size Temp.char. BJ:X5R Rated Voltage 6.3V 4V EHS Environmental Hazardous Substances Ordering code tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 1 RoHS 0.22 1 RoHS 1 RoHS 2.2 JWK107 BJ 224MV * JWK107 BJ 105MV * 1 AWK107 BJ 225MV * Capacitance tolerance Thickness mm inch 20%M 0.50.05 0.0200.002 5 X5R* 2 10 R *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated *1 1.5 *2 X7R/X7S voltage. *2 We may provide X7R/X7S for some items according to the individual specification. Temp.char. Rated Voltage 6.3V 4V B7:X7R C7:X7S Ordering code tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 1 RoHS 0.22 1 RoHS 1 RoHS 2.2 JWK107 B7 224MV * JWK107 C7 105MV * 1 AWK107 C7 225MV * *1 1.5 90 EHS Environmental Hazardous Substances X7R 5 X7S 10 R Capacitance tolerance Thickness mm inch 20%M 0.50.05 0.0200.002 *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. PART NUMBERS 212TYPE 0508 case size Temp.char. BJ:X5R Rated Voltage EHS Environmental Hazardous Substances Ordering code 1 JWK212 BJ475D* 6.3V 1 JWK212 BJ106MD* tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F RoHS 4.7 RoHS 10 Temp.char. Rated Voltage EHS Environmental Hazardous Substances Ordering code 1 1 JWK212 C6 106MD* R 10%K 20%M 0.850.1 0.0330.004 20%M Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. *2 We may provide X6S for some items according to the individual specification. tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F RoHS 4.7 RoHS 10 4 X6S 10 R Capacitance tolerance Thickness mm inch 10% K 20%M 0.850.1 0.0330.004 20%M Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. *1 1.5 10 C6:X6S JWK212 C6 475D* 6.3V 2 Thickness mm inch CAPACITORS *1 1.5 *2 X6S X5R* Capacitance tolerance ELECTRICAL CHARACTERISTICS ESR- Example of Impedance ESR vs. Frequency characteristics (Taiyo Yuden multilayer ceramic capacitor) WK107BJ105MV/WK1077105MV M JWK212BJ106MD/JWK212C6106MD M 9 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 91 ARRAY TYPE MULTILAYER CERAMIC CAPACITOR Code Temp.characteristics Operating temp. range B -2585 BJ X5R* -5585 OPERATING TEMP. B7 X7R -55125 CH C0H -55125 *X7R *We may provide X7R for some items according to the individual specification. FEATURES Ni APPLICATIONS PHSetc 1 3 J L E T U General electronic equipment Communication equipment (mobile phone, PHS, cordless phone, etc.) ORDERING CODE VDC 6.3 10 16 25 50 5 K BJ B7 CH 2 4 2 High density and high efficiency mounting. Internal electrode is nickel for increased cost performance and reliability. 4 2 B X5R X7R C0H 6 EIA LxWmm pF 0.9x0.6 1.4x1.0 2.0x1.25 9 20% 10% 1pF M K F - 104 105 mm P K V B A D 100,000 1,000,000 10 8 4 0960302 1100504 2120805 7 T 0.3 0.45 0.5 0.6 0.8 0.85 F 178mm 4mm 110, 212 178mm 2mm 096 11 E 4 K 2 1 2 B J 1 0 4 M D _ T 1 2 4 3 6 5 8 7 1 3 5 7 Rated voltageVDC End termination Temperature characteristics code Capacitance tolerance J L E T U 6.3 10 16 25 50 2 Series name 4 2 4 circuit multilayer capacitors 2 circuit multilayer capacitors K Plated BJ B7 CH 4 B X5R X7R C0H 0960302 1100504 2120805 0.9x0.6 1.4x1.0 2.0x1.25 M K F 20% 10% 1pF Nominal capacitancepF example 104 105 100,000 1,000,000 Special code - Standard products 10 Packaging Thicknessmm 6 11 9 8 Dimensions(case size)mm 10 9 P K V B A D 0.3 0.45 0.5 0.6 0.8 0.85 T F 178mm Taping 4mm pitch 0504, 0805Type 178mm Taping 2mm pitch 0302Type 11 Internal code Standard products Blank space 92 Please read the "Notice for TAIYO YUDEN products" before using this catalog. EXTERNAL DIMENSIONS Type EIA L W E1 E2 P E2 2K096 0.90.05 0.60.05 0.230.10 0.1250.075 0.450.05 0302 0.0350.0020.0240.0020.0090.0040.0050.0030.0180.002 E1 E2 2K110 1.370.07 1.000.08 0.360.10 0.20.10 0.640.10 0504 0.0540.0030.0390.0030.0140.0040.0080.0040.0250.004 E1 AVAILABLE CAPACITANCE RANGE CH / C0H/CG C0G BJ/ X7R, BJ/ X5R Cap [F] 0.001 0.0022 0.0047 0.01 0.022 0.047 0.1 0.22 0.47 1.0 2.2 4 CAPACITORS 4K212 2.000.10 1.250.10 0.250.10 0.250.15 0.500.10 0805 0.0790.0040.0490.0040.0100.0040.0100.0060.0200.004 2K212 2.000.10 1.250.10 0.500.20 0.250.15 1.000.10 0805 0.0790.0040.0490.0040.0200.0080.0100.0060.0390.004 T 0.300.03 P 0.0120.001 0.450.05 K 0.0180.002 0.50.05 V 0.0200.002 0.600.06 B 0.0240.003 0.800.08 A 0.0310.003 0.850.10 D 0.0330.004 0.850.10 D 0.0330.004 Unit:mm inch Type 096 2 110 2 2K096 2K110 B/X7R B/X5R X5R Temp.Char B/X5R X5R VDC 10V 6.3V 50V 25V 16V 50V 25V 16V 10V 10V 6.3V [pF:3digits] B B 102 B B 222 B B 472 B B 103 P B B 223 B B 473 K B B B 104 K B 224 K A 474 V 105 A A 225 212 2 2K212 212 4 4K212 B/X5R X5R B/X7R B/X5R 25V 10V 16V 25V 16V 10V D D Type Temp.Char CH / CG CH / CG 25V 50V Cap VDC [pF] [pF:3digits] P B 10 100 P B 12 120 P B 15 150 P B 18 180 P B 22 220 P B 27 270 P B 33 330 P B 39 390 P B 47 470 P B 56 560 P B 68 680 P B 82 820 P B 100 101 X5R 10V D D D D D 096 2 110 2 2K096 2K110 D Letters in the table indicate thickness. Letters in the table indicate thickness. Temp.char.Code BJ B7 CH Temperature characteristics Applicable standard B X5R X7R CH C0H JIS EIA EIA JIS EIA Temperature range Ref. Temp. Capacitance change -2585 -5585 -55125 -55125 -55125 20 25 25 20 25 10 15 15 60 ppm/ 60 ppm/ tan % Capacitance tolerance Dissipation factor 10 K 20 M 3.5, 5, 10 max.* 10 K 0.1 max.** * **27pF Q400+20C 30pF Q1000 *Different depending on the item. Please refer to the part numbers list for the differences. **27pF or over Q400+20C Selection Guide P.12 etc Part Numbers 30pF or over Q1000 Electrical Characteristics P.94 P.97 Packaging P.98 Reliability Data P.102 Precautions P.108 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 93 PART NUMBERS 096TYPE 0302 case size 2 2 circuit type Temp.char. BJ:B/X5R Rated Voltage 10V EHS Environmental Hazardous Substances Ordering code L2K096 BJ103P RoHS 0.01 1 RoHS 0.047 1 RoHS 0.1 1 RoHS 0.22 J2K096 BJ473K* 6.3V tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F J2K096 BJ104K* J2K096 BJ224MK* *1 1.5 Temp.char. Rated Voltage 25V 94 Capacitance tolerance Thickness mm inch 0.30.03 B/X5R 5 R X5R 10 10%K 0.0120.001 20%M 0.450.05 0.0180.002 20% M Please specify the capacitance tolerance code.i *1 Test voltage of loading at high temperature test is 1.5 time of the rated voltage. CH:CH/C0H Ordering code EHS Environmental Hazardous Substances T2K096 CH100FP T2K096 CH120KP T2K096 CH150KP T2K096 CH180KP T2K096 CH220KP T2K096 CH270KP T2K096 CH330KP T2K096 CH390KP T2K096 CH470KP T2K096 CH560KP T2K096 CH680KP T2K096 CH820KP T2K096 CH101KP RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Temperature Capacitance characteristics pF 10 12 15 18 22 27 33 39 47 56 68 82 100 Q Symbol Soldering method R: Reflow soldering W: Wave soldering Capacitance tolerance Thickness mm inch 1F F 400+20C R CH/C0H 0.30.03 10%K 0.0120.001 1000 Please read the "Notice for TAIYO YUDEN products" before using this catalog. PART NUMBERS 110TYPE 0504 case size 2 2 circuit type Temp.char. BJ:B/X5R Rated Voltage 50V 16V 10V U2K110 BJ102B U2K110 BJ222B U2K110 BJ472B T2K110 BJ103B T2K110 BJ223B T2K110 BJ104B E2K110 BJ473B E2K110 BJ104B L2K110 BJ224B L2K110 BJ474A RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1 RoHS 1 RoHS 1.0 1 RoHS 2.2 L2K110 BJ105A* J2K110 BJ105V * 6.3V tan Dissipation Soldering method Thickness Temperature factor mm Capacitance R: Reflow soldering Capacitance characteristics %Max. W: Wave soldering inch F tolerance 0.001 0.0022 2 0.0047 3.5 B/X5R* 0.01 0.60.06 0.022 0.0240.002 0.1 B/X5R 5 3.5 0.047 2 B/X5R* 10%K R 0.1 20%M 0.22 5 B/X5R 0.47 0.80.08 0.0310.003 1.0 J2K110 BJ225A* *1 1.5 *2 X7R Temp.char. Rated Voltage 50V 25V 16V EHS Environmental Hazardous Substances 50V Please specify the capacitance tolerance code.i *1 Test voltage of loading at high temperature test is 1.5 time of the rated voltage. *2 We may provide X7R for some items according to the individual specification. U2K110 B7 102B U2K110 B7 222B U2K110 B7 472B T2K110 B7 103B T2K110 B7 223B E2K110 B7 473B E2K110 B7 104B RoHS RoHS RoHS RoHS RoHS RoHS RoHS tan Dissipation Soldering method Thickness Temperature factor mm Capacitance R: Reflow soldering Capacitance characteristics %Max. W: Wave soldering inch F tolerance 0.001 0.0022 0.0047 3.5 10%K 0.60.06 X7R 0.01 R 20%M0.0240.002 0.022 0.047 0.1 5 Rated Voltage 0.50.05 0.020.002 0.80.08 0.0310.003 10 B7:X7R Ordering code Temp.char. X5R 4 CAPACITORS 25V EHS Environmental Hazardous Substances Ordering code Please specify the capacitance tolerance code. CH:CH/C0H Ordering code EHS Environmental Hazardous Substances U2K110 CH100FB U2K110 CH120KB U2K110 CH150KB U2K110 CH180KB U2K110 CH220KB U2K110 CH270KB U2K110 CH330KB U2K110 CH390KB U2K110 CH470KB U2K110 CH560KB U2K110 CH680KB U2K110 CH820KB U2K110 CH101KB RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Temperature Capacitance characteristics pF 10 12 15 18 22 27 33 39 47 56 68 82 100 Q Symbol Soldering method R: Reflow soldering W: Wave soldering Capacitance tolerance Thickness mm inch 1F F 400+20C CH/C0H R 0.60.06 10%K 0.0240.002 1000 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 95 PART NUMBERS 212TYPE 0805 case size 2 2 circuit type Temp.char. BJ:B/X5R Rated Voltage EHS Environmental Hazardous Substances Ordering code 25V T2K212 BJ105D 10V L2K212 BJ225MD* 1 tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F RoHS 1.0 B/X5R 5 RoHS 2.2 X5R 10 *1 1.5 R Capacitance tolerance Thickness mm inch 10%K 20%M 0.850.1 0.0330.004 20% M Please specify the capacitance tolerance code. *1 Test Voltage of Loading at high temperature test is 1.5 time of the rated voltage. 212TYPE 0805 case size 4 4 circuit type Temp.char. BJ:B/X5R Rated Voltage Ordering code EHS Environmental Hazardous Substances tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.1 B/X5R 25V T4K212 BJ104D RoHS 16V E4K212 BJ104D RoHS 0.1 10V L4K212 BJ224D L4K212 BJ474D 1 L4K212 BJ105D* RoHS RoHS RoHS 0.22 0.47 1 Rated Voltage 16V 5 R 10%K 0.850.1 20%M0.0330.004 10 B7:X7R Ordering code EHS Environmental Hazardous Substances E4K212 B7 104D 96 2 B/X5R X5R Thickness mm inch Please specify the capacitance tolerance code.i *1 Test voltage of loading at high temperature test is 1.5 time of the rated voltage. *2 We may provide X7R for some items according to the individual specification. *1 1.5 *2 X7R Temp.char. B/X5R* Capacitance tolerance RoHS tan Dissipation Soldering method Temperature factor Capacitance R: Reflow soldering characteristics %Max. W: Wave soldering F 0.1 X7R 5 R Capacitance tolerance Thickness mm inch 10%K 0.850.1 20%M0.0330.004 Please specify the capacitance tolerance code. Please read the "Notice for TAIYO YUDEN products" before using this catalog. ELECTRICAL CHARACTERISTICS ESR- Example of Impedance ESR vs. Frequency characteristics (Taiyo Yuden multilayer ceramic capacitor) J2K096BJ104MK L2K096BJ103MP T2K096CH100FP 100000 100000 1000000 10000 10000 100000 1000 1000 100 10 10 1 1 0.1 0.1 0.01 0.1 1 10 100 0.01 0.1 1000 10000 100000 10000 1000 100 10 1 0.1 1 10 100 1000 10000 100000 0.01 1 100 10 1000 10000 4 CAPACITORS 100 ESR Impedance MHz T2K110BJ103MB/T2K110B7103MB T2K096CH101KP 1000000 100000 100000 10000 ESR Impedance 100000 E2K110BJ104MB/E2K110B7104MB 1000000 10000 10000 1000 1000 1000 100 100 100 10 10 10 1 1 1 0.1 0.1 0.1 0.01 0.01 0.01 1 0.001 0.1 0.001 0.1 100 10 1000 10000 1 10 100 1000 10000 100000 1 10 100 1000 10000 100000 MHz 100 10 L4K212BJ105KD J2K110BJ225MA L2K110BJ105MA 1000 10000 10000 1000 1000 100 100 10 10 1 0.1 0.01 0.001 0.1 1 10 100 1000 10000 100000 1 1 0.1 0.1 0.01 0.01 0.001 0.1 1 10 100 1000 10000 100000 0.001 0.1 1 10 100 1000 10000 100000 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 97 PACKAGING Minimum Quantity Taped packaging EIA Type Standard quantity [ pcs ] Thickness mm inch code paper Embossed tape MK042 01005 0.2 0.008 C 15000 MK063 0201 0.3 0.012 P 15000 0.3 0.012 P 0.45 0.018 K 10000 10000 10000 2K096 0302 WK105 0204 MK105 0402 VK1050402 0.3 0.012 0.5 0.020 P V, W W 0.45 0.018 K 4000 0.5 0.020 V 4000 0.8 0.031 A 4000 0.5 0.020 V 4000 0.8 0.031 A 4000 0.6 0.024 B 4000 0.45 0.018 K 4000 0.85 0.033 D 4000 1.25 0.049 G 3000 4K212 0805 0.85 0.033 D 4000 2K212 0805 0.85 0.033 D 4000 0.85 0.033 D 4000 1.15 0.045 F 1.25 0.049 G 3000 1.6 0.063 L 2000 0.85 0.033 D 2000 MK107 0603 WK107 0306 2K110 0504 MK212 0805 WK212 0508 MK316 1206 MK325 1210 MK432 1812 1.15 0.045 F 1.5 0.059 H 1.9 0.075 N 2.0max 0.079 Y Bulk Cassette 2000 2.5 0.098 M 500, 1000 2.5 0.098 M 500 Taping material WK Unitmminch 105, 107, 212 Please contact any of our offices for accepting your requirement according to dimensions 0402, 0603, 0805.(inch) WK 98 Please read the "Notice for TAIYO YUDEN products" before using this catalog. PACKAGING Taping dimensions Paper Tape8mm 0.315inches wide Embossed tape8mm 0.315inches wide 4 2.00.05 Chip Cavity Type Insertion Pitch Tape Thickness T1 0.25 MK042 01005 0.010 0.45 2.00.05 0.36max. 0.27max. 0.018 0.0790.002 0.014 0.011 0.37 MK063 0201 0.016 0.67 2.00.05 0.45max. 0.42max. 0.027 0.0790.002 0.018 0.017 0.65 WK105 0204 0.026 1.15 2.00.05 0.45max 0.42max 0.045 0.0790.0020.018max0.017max Type Chip cavity EIA WK1070306 MK2120805 Unitmminch MK3161206 MK3251210 CAPACITORS T1 2.00.05 Insertion Pitch Tape Thickness A B 1.0 1.8 F 1.3max. 0.250.1 K T 0.039 0.071 0.051max. 0.010.004 1.655 2.4 0.065 0.094 2.0 3.6 0.079 0.142 2.8 3.6 0.110 0.142 4.00.1 0.1570.0043.4max. 0.6max. 0.134max.0.024max. Unitmminch 2.00.05 Embossed tape12mm 0.472inches wide 2.00.05 Type EIA 2K096 0302 Chip Cavity Insertion Pitch Tape Thickness A B 0.72 1.02 0.028 MK105 0402 0.655 VK105 0402 0.026 F T 52.00.05 0.45max.(0.018max) 0.040 0.0790.0020.6max.(0.024max) 1.155 52.00.05 0.8max. 0.045 0.0790.0020.031max. Unitmminch Type EIA MK4321812 Chip cavity A 3.7 0.146 Insertion Pitch Tape Thickness B F 4.9 8.00.1 K T 4.0max. 0.6max. 0.193 0.3150.004 0.157max.0.024max. Unitmminch Type EIA Chip Cavity Insertion Pitch Tape Thickness A MK107 0603 1.0 WK107 0306 0.039 2K110 0504 1.15 0.045 B F T 1.8 4.00.1 1.1max. 0.071 0.1570.004 0.043max. 1.55 4.00.1 1.0max. 0.061 0.1570.004 0.039max. MK212 0805 WK212 0508 1.655 2.4 4K212 0805 0.065 0.094 4.00.1 1.1max. 0.1570.004 0.043max. 2K212 0805 MK316 1206 2.0 3.6 0.079 0.142 Unitmminch Please read the "Notice for TAIYO YUDEN products" before using this catalog. 99 PACKAGING Leader and Blank portion 160mm 6.3inches or more 100mm 3.94inches or more Direction of tape feed 400mm 15.7inches or more Reel size Top Tape Strength 0.10.7N The top tape requires a peel-off force of 0.10.7N in the direction of the arrow as illustrated below. 100 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 1/3 RELIABILITY DATA Multilayer Ceramic Capacitor Chips Specified Value Item Temperature CompensatingClass 1 Standard 1.Operating Temperature High Frequency Type High PermitivityClass 2 Standard Note1 BJ-55 to 125 -55 to 125 Test Methods and Remarks High Value -25 to 85 High Capacitance Type BJX7R -55125, BJX5R -5585 -25 to 85 High Capacitance Type BJX7R -55125, BJX5R -5585 F-25 to 85 Range 2. S t o r a g e Te m p e r a t u r e BJ-55 to 125 -55 to 125 EY5U-3085, FY5V-3085 F-25 to 85 Range 50VDC,25VDC, 16VDC 16VDC 50VDC 50VDC,25VDC EY5U-3085, FY5V-3085 50VDC,35VDC,25VDC 16VDC,10VDC,6.3VDC 4DVC, 2.5VDC 4.Withstanding Voltage Between terminals N o b r e a k d o w n o r No abnormality Applied voltage: Rated voltagex3 Class 1 No breakdown or damage Rated voltagex2.5Class 2 damage Duration: 1 to 5 sec. Charge/discharge current: 50mA max.Class 1,2 5.Insulation Resistance 500 MF. or 10000 M., whichever is the Applied voltage: Rated voltage 10000 M min. Duration: 605 sec. smaller. Charge/discharge current: 50mA max. Note 5 6.CapacitanceTolerance 0.5 to 5 pF: 0.25 pF 0.5 to 2 pF : 0.1 pF BJ: 10%, 20% BJ1020 1 to 10pF: 0.5 pF 2.2 to 5.1 pF : 5% F80% F-2080 5 to 10 pF: 1 pF -20 11 pF or over: 5% 10% 105TYPER, S, T, U only 0.52pF: 0.1pF 2.220pF: 5% 7.Q or Tangent of Loss Angle Under 30 pF R e f e r t o d e t a i l e d BJ: 2.5% max.50V, 25V BJ2.5 max. tan : Q400 20C specification F: 5.0% max.50V, 25V F7 max. Note 4 30 pF or over : Q1000 Note 4 C= Nominal capacitance Measuring frequency Class1 1Hz10%C1000pF 1Hz10%C1000pF Class2 1Hz10%C10F 120Hz10HzC10F Measuring voltage Note 4 Class10.55VrmsC1000pF 10.2VrmsC1000pF Class2 10.2VrmsC10F 0.50.1VrmsC10F Bias application: None Multilayer: Measuring frequency Class1 1Hz10%C1000pF 1Hz10%C1000pF Class2 1Hz10%C10F 120Hz10HzC10F Measuring voltage Note 4 Class10.55VrmsC1000pF 10.2VrmsC1000pF Class2 10.2VrmsC10F 0.50.1VrmsC10F Bias application: None HighFrequencyMultilayer: Measuring frequency: 1GHz Measuring equipment: HP4291A Measuring jig: HP16192A 8.Temperature Without CK0250 CH060 BJ10-2585 BJ10 According to JIS C 5102 clause 7.12. Characteristic voltage ap- CJ0120 RH-22060 F 30-2585 Temperature compensating: of Capacitance plication CH060 4 CAPACITORS 3.Rated Voltage ppm/ -80 BJX7R 15 FY5V 22 CG030 -82 RH-22060 -2585 F30-80 -2585 BJX7RX5R FY5V SJ-330120 22-82 SH-33060 made to calculate temperature characteristic by the following equation. C85 C20 x 106 ppm/ C20xT 15 SK-330250 Measurement of capacitance at 20 and 85 shall be High permitivity: TK-470250 Change of maximum capacitance deviation in step 1 to 5 TJ-470120 Temperature at step 1: 20 UK-750250 Temperature at step 2: minimum operating temperature UJ-750120 Temperature at step 3: 20Reference temperature S L 350 t o 1000 Temperature at step 4: maximum operating temperature Temperature at step 5: 20 ppm/ Reference temperature for X7R, X5R, Y5U and Y5V shall be 25 9.Resistance to Flexure of Substrate Appearance: Appearance: Appearance: No abnormality No abnormality No abnormality Capacitance change: Capacitance change: Capacitance change: Within 5% or 0.5 pF, Within0.5 pF BJWithin 12.5% whichever is larger. Warp: 1mm Testing board: glass epoxyresin substrate Thickness: 1.6mm063 TYPE : 0.8mm The measurement shall be made with board in the bent position. FWithin 30% Please read the "Notice for TAIYO YUDEN products" before using this catalog. 103 2/3 RELIABILITY DATA Multilayer Ceramic Capacitor Chips Specified Value Temperature CompensatingClass 1 Item Standard 10.Body Strength High Frequency Type High PermittivityClass 2 Standard Note1 Test Methods and Remarks High Value No mechanical dam- High Frequency Multilayer: age. Applied force: 5N 4 Duration: 10 sec. A 11.Adhesion of Electrode No separation or indication of separation of electrode. A LW Reverse Applied force: 5N 01005, 0201, 0302 TYPE 2N Duration: 305 sec. 12.Solderability At least 95% of terminal electrode is covered by new solder. Solder temperature: 2305 13.Resistance to soldering Appearance: No ab- Appearance: No ab- Appearance: No abnormality Preconditioning: Thermal treatmentat 150 for 1 hr CAPACITORS A Duration: 41 sec. normality normality Capacitance change: Within 7.5%BJ Within 20%F Capacitance change: Capacitance change: W i t h i n 2 . 5 % o r Within 2.5% tan : Initial value 0.25pF, whichever is Q: Initial value Insulation resistance: Initial value larger. Insulation resistance: Withstanding voltagebetween terminals: No Q: Initial value Initial value abnormality Note 4 Duration: 30.5 sec. Preheating conditions: 80 to 100, 2 to 5 min. or 5 to 10 min. 150 to 200, 2 to 5 min. or 5 to 10 min. Recovery: Recovery for the following period under the standard condition after the test. Insulation resistance: Withstanding voltage 624 hrsClass 1 between terminals: Initial value Applicable to Class 2. Solder temperature: 2705 242 hrsClass 2 Withstanding voltage No abnormality between terminals: No abnormality 14.Thermal shock Preconditioning: Thermal treatmentat 150 for 1 hr Appearance: No ab- Appearance: No ab- Appearance: No abnormality normality normality Capacitance change: Within 7.5%BJ Within 20%F Capacitance change: Capacitance change: Applicable to Class 2. Conditions for 1 cycle: 0 303 min. Step 1: Minimum operating temperature -3 W i t h i n 2 . 5 % o r Within 0.25pF tan : Initial value 0.25pF, whichever is Q: Initial value Insulation resistance: Initial value Step 2: Room temperature larger. Insulation resistance: Withstanding voltagebetween terminals: No 0 303 min. Step 3: Maximum operating temperature - Q: Initial value Initial value abnormality Step 4: Room temperature Note 4 Insulation resistance: Withstanding voltage 2 to 3 min. Number of cycles: 5 times between terminals: Initial value 2 to 3 min. 3 Recovery after the test: 624 hrsClass 1 242 hrsClass 2 Withstanding voltage No abnormality between terminals: No abnormality 15.Damp Heatsteady state Appearance: No ab- Multilayer normality normality Preconditioning: Thermal treatmentat 150 for 1 hr Capacitance change: Capacitance change: Capacitance change: Capacitance change: Within 5% or 0.5pF, Within 0.5pF, BJ: Within 12.5% BJ:Within 12.5% Temperature: 402 whichever is larger. Insulation resistance: F: Within 30% Note 4 Humidity: 90 to 95% RH Q: 1000 M min. tan : BJ: 5.0% max. tan : Duration: 500 24 -0 hrs BJ: 5.0% max. Note 4. Recovery: Recovery for the following period under the standard condition after the removal from test chamber. Appearance: No ab- Appearance: No ab- Appearance: No abnormality C30 pF normality F: 7.5% max. : Q350 10 C 30 p F : Q Note 4 F: 11.0% max. 275 2.5C Insulation resistance: Insulation resistance: C10 pF : Q200 50 MF or 1000 M 50 MF or 1000 M Applicable to Class 2. 624 hrsClass 1 242 hrsClass 2 10C whichever is smaller. whichever is smaller. HighFrequency Multilayer: C: Nominal capacitance Note 5 Note 5 Temperature: 602 Insulation resistance: Humidity: 90 to 95% RH 1000 M min. Duration: 500 24 hrs -0 Recovery: Recovery for the following period under the standard condition after the removal from test chamber. 624 hrsClass 1 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 105 3/3 RELIABILITY DATA Multilayer Ceramic Capacitor Chips Specified Value Item 16.Loading under Damp Heat High PermittivityClass 2 Test Methods and Remarks Standard High Frequency Type Standard Note1 High Value Appearance: No abnormality Capacitance change: Within 7.5% or 0.75pF, whichever is larger. Q: C30 pF: Q200 C30 pF: Q100 10C/3 C Nominal capacitance Insulation resistance: 500 M min. Appearance: No abnormality Capacitance change: C2 pF: Within 0.4 pF C2 pF: Within 0.75 pF C Nominal capacitance Insulation resistance: 500 M min. Appearance: No abnormality Capacitance change: BJ: Within 12.5% F: Within 30% Note 4 tan : BJ: 5.0% max. F: 7.5% max. Note 4 Insulation resistance: 25 MF or 500 M, whichever is the smaller. Note 5 Appearance: No abnormality Capacitance change: BJWithin12.5 FWithin30 Note 4 tan BJ5.0max. F11max. Note 4 Insulation resistance: 25 MF or 500 M, whichever is the smaller. Note 5 According to JIS C 5102 Clause 9. 9. Multilayer: Preconditioning: Voltage treatmentClass 2 Temperature: 402 Humidity: 90 to 95% RH Duration: 500 24 hrs -0 Applied voltage: Rated voltage Charge and discharge current: 50mA max.Class 1,2 Recovery: Recovery for the following period under the standard condition after the removal from test chamber. 624 hrsClass 1 242 hrsClass 2 HighFrequency Multilayer: Temperature: 602 Humidity: 90 to 95% RH Duration: 500 24 hrs -0 Applied voltage: Rated voltage Charge and discharge current: 50mA max. Recovery: 624 hrs of recovery under the standard condition after the removal from test chamber. Appearance: No abnormality Capacitance change: Within 3% or 0.3pF, whichever is larger. Q: C30 pF : Q350 10C30 pF: Q275 2.5C C10 pF: Q200 10C CNominal capacitance Insulation resistance: 1000 M min. Appearance: No abnormality Capacitance change: Within 3% or 0.3pF, whichever is larger. Insulation resistance: 1000 M min. Appearance: No abnormality Capacitance change: BJWithin12.5 Within20 Within25 FWithin30 Note 4 tan BJ5.0max. F11max. Note 4 Insulation resistance: 50 MF or 1000 M, whichever is smaller. Note 5 According to JIS C 5102 clause 9.10. Multilayer: Preconditioning: Voltage treatmentClass 2 Temperature:1253Class 1, Class 2: B, BJX7R 852Class 2: BJ,F 48 Duration: 1000 - 0 hrs Applied voltage: Rated voltagex2 Note 6 Recovery: Recovery for the following period under the standard condition after the removal from test chamber. 624 hrsClass 1 242 hrsClass 2 HighFrequency Multilayer: Temperature: 1253Class 1 Duration: 100048 hrs -0 Applied voltage: Rated voltagex2 Recovery: 624 hrs of recovery under the standard condition after the removal from test chamber. Appearance: No abnormality Capacitance change: BJ: Within 12.5% F: Within 30% Note 4 tan : BJ: 4.0% max. F: 7.5% max. Note 4 Insulation resistance: 50 MF or 1000 M, whichever is smaller. Note 5 4 CAPACITORS 17.Loading at High Temperature Temperature CompensatingClass 1 Note 1 :For 105 type, specified in "High value". Note 2 :Thermal treatmentMultilayer : 1 hr of thermal treatment at 150 0 /-10 followed by 242 hrs of recovery under the standard condition shall be performed before the measurement. Note 3 :Voltage treatmentMultilayer: 1 hr of voltage treatment under the specified temperature and voltage for testing followed by 242 hrs of recovery under the standard condition shall be performed before the measurement. Note 4, 5 :The figure indicates typical inspection. Please refer to individual specifications. Note 6 :Some of the parts are applicable in rated voltagex1.5. Please refer to individual specifications. Note on standard condition: "standard condition" referred to herein is defined as follows: 5 to 35 of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure. When there are questions concerning measurement results: In order to provide correlation data, the test shall be conducted under condition of 202 of temperature, 60 to 70% relative humidity, and 86 to 106kPa of air pressure. Unless otherwise specified, all the tests are conducted under the "standard condition." Please read the "Notice for TAIYO YUDEN products" before using this catalog. 107 1/6 PRECAUTIONS Precautions on the use of Multilayer Ceramic Capacitors Stages 1.Circuit Design Precautions Technical considerations Verification of operating environment, electrical rating and performance 1. A malfunction in medical equipment, spacecraft, nuclear 4 reactors, etc. may cause serious harm to human life or have severe social ramifications. As such, any capacitors to be CAPACITORS used in such equipment may require higher safety and/or reliability considerations and should be clearly differentiated from components used in general purpose applications. Operating VoltageVerification of Rated voltage 1. The operating voltage for capacitors must always be lower than their rated values. If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages should be lower than the rated value of the capacitor chosen. For a circuit where both an AC and a pulse voltage may be present, the sum of their peak voltages should also be lower than the capacitor's rated voltage. 2. Even if the applied voltage is lower than the rated value, the reliability of capacitors might be reduced if either a high frequency AC voltage or a pulse voltage having rapid rise time is present in the circuit. 2.PCB Design Pattern configurations Design of Land-patterns 1. When capacitors are mounted on a PCB, the amount of solder usedsize of filletcan directly affect capacitor per- 1.The following diagrams and tables show some examples of recommended patterns to prevent excessive solder amourts.larger fillets which extend above the component end terminations Examples of improper pattern designs are also shown. formance. Therefore, the following items must be carefully considered in the design of solder land patterns: 1Recommended land dimensions for a typical chip capacitor land patterns for PCBs 1The amount of solder applied can affect the ability of chips to withstand mechanical stresses which may lead to breaking or cracking. Therefore, when designing land-patterns it is necessary to consider the appropriate size and configuration of the solder pads which in turn determines the amount of solder necessary to form the fillets. Recommended land dimensions for wave-soldering unit: mm 2When more than one part is jointly soldered onto the Type 107 212 316 L 1.6 2.0 3.2 3.2 W 0.8 51.25 1.6 2.5 same land or pad, the pad must be designed so that each component's soldering point is separated by solder-resist. Size 325 A 0.81.0 1.01.4 1.82.5 1.82.5 B 0.50.8 0.81.5 0.81.7 0.81.7 C 0.60.8 0.91.2 1.21.6 1.82.5 Recommended land dimensions for reflow-soldering unit: mm Type Size 042 063 105 107 212 316 325 L 0.4 0.6 1.0 1.6 2.0 3.2 3.2 432 4.5 W 0.2 0.3 0.5 0.8 51.25 1.6 2.5 3.2 A 0.150.25 0.200.30 0.450.55 0.81.0 0.81.2 1.82.5 1.82.5 2.53.5 B 0.100.20 0.200.30 0.400.50 0.60.8 0.81.2 1.01.5 1.01.5 1.51.8 C 0.150.30 0.250.40 0.450.55 0.60.8 0.91.6 1.22.0 1.83.2 2.33.5 Excess solder can affect the ability of chips to withstand mechanical stresses. Therefore, please take proper precautions when designing land-patterns. Size Type 2.0 W 1.25 a 0.50.6 b 0.50.6 c 0.20.3 d 0.5 Size Type 2124 circuits L 2122 circuits 1102 circuits0962 circuits L 2.0 1.37 0.9 W 1.25 1.0 0.6 a 0.50.6 0.350.45 0.250.35 b 0.50.6 0.550.65 0.150.25 c 0.50.6 0.30.4 0.150.25 d 1.0 0.64 0.45 Please read the "Notice for TAIYO YUDEN products" before using this catalog. 109 2/6 PRECAUTIONS Precautions on the use of Multilayer Ceramic Capacitors Stages Precautions Technical considerations LWDC Recommended land dimensions for reflow-soldering 4 Size L 107 212 50.8 1.25 1.0 1.6 2.0 W A 0.180.22 0.250.3 0.50.7 B 0.20.25 0.30.4 C 0.91.1 1.51.7 CAPACITORS 105 0.52 Type 0.40.5 1.92.1 unit: mm 2Examples of good and bad solder application 2.PCB Design Not recommended Items Recommended Mixed mounting of SMD and leaded components Component placement close to the chassis Hand-soldering of leaded components near mounted components Horizontal component placement Pattern configurations Capacitor layout on panelized [breakaway] PC boards 1-1. The following are examples of good and bad capacitor layout; SMD capacitors should be located to minimize any possible mechanical stresses from board warp or deflection. 1. After capacitors have been mounted on the boards, chips can be subjected to mechanical stresses in subsequent Not recommended Recommended manufacturing processesPCB cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering the reflow soldered boards etc. For this reason, Deflection of planning pattern configurations and the position of SMD ca- the board pacitors should be carefully performed to minimize stress. 1-2. To layout the capacitors for the breakaway PC board, it should be noted that the amount of mechanical stresses given will vary depending on capacitor layout. The example below shows recommendations for better design. 1-3. When breaking PC boards along their perforations, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, any ideal SMD capacitor layout must also consider the PCB splitting procedure. Please read the "Notice for TAIYO YUDEN products" before using this catalog. 111 3/6 PRECAUTIONS Precautions on the use of Multilayer Ceramic Capacitors Stages 3.Considerations for automatic placement Precautions Adjustment of mounting machine 1. Excessive impact load should not be imposed on the capacitors when mounting onto the PC boards. 2. The maintenance and inspection of the mounters should be conducted periodically. Technical considerations 1. If the lower limit of the pick-up nozzle is low, too much force may be imposed on the capacitors, causing damage. To avoid this, the following points should be considered before lowering the pick-up nozzle: 1 The lower limit of the pick-up nozzle should be adjusted to the surface level of the PC board after correcting for deflection of the board. 2 The pick-up pressure should be adjusted between 1 and 3 N static loads. nozzle, supporting pins or back-up pins should be used under the PC board. The following diagrams show some typical examples of good pick-up nozzle placement: Not recommended Recommended Single-sided 4 CAPACITORS 3 To reduce the amount of deflection of the board caused by impact of the pick-up mounting Double-sided mounting 2. As the alignment pin wears out, adjustment of the nozzle height can cause chipping or cracking of the capacitors because of mechanical impact on the capacitors. To avoid this, the monitoring of the width between the alignment pin in the stopped position, and maintenance, inspection and replacement of the pin should be conducted periodically. Selection of Adhesives 1. Some adhesives may cause reduced insulation resistance. The difference between 1. Mounting capacitors with adhesives in preliminary assembly, the shrinkage percentage of the adhesive and that of the capacitors may result in before the soldering stage, may lead to degraded capacitor stresses on the capacitors and lead to cracking. Moreover, too little or too much characteristics unless the following factors are appropriately adhesive applied to the board may adversely affect component placement, so the fol- checked; the size of land patterns, type of adhesive, amount lowing precautions should be noted in the application of adhesives. applied, hardening temperature and hardening period. Therefore, it is imperative to consult the manufacturer of the adhesives on proper usage and amounts of adhesive to use. 1 Required adhesive characteristics a. The adhesive should be strong enough to hold parts on the board during the mounting & solder process. b. The adhesive should have sufficient strength at high temperatures. c. The adhesive should have good coating and thickness consistency. d. The adhesive should be used during its prescribed shelf life. e. The adhesive should harden rapidly f. The adhesive must not be contaminated. g. The adhesive should have excellent insulation characteristics. h. The adhesive should not be toxic and have no emission of toxic gasses. 2The recommended amount of adhesives is as follows; Figure 212/316 case sizes as examples a 0.3mm min b 100 120 m c Adhesives should not contact the pad Please read the "Notice for TAIYO YUDEN products" before using this catalog. 113 4/6 PRECAUTIONS Precautions on the use of Multilayer Ceramic Capacitors Stages 4. Soldering Technical considerations Precautions 1-1. When too much halogenated substanceChlorine, etc.content is used to activate Selection of Flux the flux, or highly acidic flux is used, an excessive amount of residue after soldering 1. Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following condi- may lead to corrosion of the terminal electrodes or degradation of insulation resis- tions prior to use; tance on the surface of the capacitors. 1 Flux used should be with less than or equal to 0.1 wt% 1-2. Flux is used to increase solderability in flow soldering, but if too much is applied, a equivelent to chrolineof halogenated content. Flux large amount of flux gas may be emitted and may detrimentally affect solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system. 1-3. Since the residue of water-soluble flux is easily dissolved by water content in the flux applied should be controlled at the optimum level. air, the residue on the surface of capacitors in high humidity conditions may cause a 3 When using water-soluble flux, special care should be degradation of insulation resistance and therefore affect the reliability of the components. The cleaning methods and the capability of the machines used should also be taken to properly clean the boards. considered carefully when selecting water-soluble flux. Soldering 1-1. Preheating when soldering Temperature, time, amount of solder, etc. are specified in ac- Heating: Ceramic chip components should be preheated to within 100 to 130 of the CAPACITORS having a strong acidity content should not be applied. 2 When soldering capacitors on the board, the amount of 4 soldering. cordance with the following recommended conditions. Cooling: The temperature difference between the components and cleaning process should not be greater than 100. Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling. Therefore, the soldering process must be conducted with great care so as to prevent malfunction of the components due to excessive thermal shock. Recommended conditions for soldering Sn-Zn solder paste can affect MLCC reliability performance. [Reflow soldering] Please contact us prior to usage. 300 Temperature profile Peak 260 max 10 sec max 200 200 Gradually cooling Preheating 100 100 0 150 60 230 40 0 100 300 Caution 150 60 sec min Heating above 230 40 sec max Ceramic chip components should be preheated to within 100 to 130 of the soldering. Assured to be reflow soldering for 2 times. Pb free soldering Temperature 300 1. The ideal condition is to have solder mass fillet controlled tomax 1/2 to 1/3 of the Peak 260 260 10 sec max 10 thickness of the capacitor, as shown below: 200 Pb free soldering Temperature 300 260 10 200 Gradually cooling Preheating 150 150 100 Pb free soldering Temperature 300 Capacitor 120 Peak 260 260 120 sec min max 10 sec max 10 0 0 Solder 200 Ceramic chip components should be preheated to 200 100 300 100 PC board 100 within 100 to 130 of the soldering. Gradually Assured to be wave soldering for 1 time. cooling Except for reflow soldering type. Preheating 2. Because dwell times can detrimentally affect solderability, soldering 150 150 excessive Heating abovedu230 230 60 sec min Pb free 60 40 sec max 40 soldering Temperature 0 0 ration should be kept as close to recommended as possible. 400 times 400 100 Ceramic chip components should be preheated to 350 3 [Wave soldering] 300 Temperature 200 100 300 profile 350 max within 100 to 130 of the soldering. 3 sec max Assured to be reflow soldering for 2 times. Gradually cooling 300 200 Pb free soldering Temperature 100 300 260 60 10 60 secmax min Peak 260 10 sec max 0 20019032161303225 0 2001903216Type max, 1303225 100 100 The soldering iron should not directly touch the 0 20W1 150 1 120 400 Caution Gradually Type min Preheating cooling It is recommended to use 20W soldering iron and 150 the tip is 1 or less. 0 components. secsoldering min Assured120 to be iron for 1 time. Ceramic chip components should be preheated to Note: The above profiles are the maximum allowable within 100 to condition, 130 of the soldering. soldering therefore these profiles are Assured to be wave soldering for 1 time. not always recommended. Except for reflow soldering type. Pb free soldering Temperature 400 350 1. Make sure the capacitors are preheated sufficiently. 350 max 3 sec max 3 300 and melted solder should not be 2. The temperature difference between the capacitor Gradually 300 200 100 greater than 100 to 130 200 cooling 3. Cooling after soldering should be as gradual as 100possible. 60 sec min 0 4. Wave60 soldering must not be applied to the capacitors designated as for reflow sol0 190 3216 130 3225 dering only. 20W1 1 1903216Type max , 1303225 Type min It is recommended to use 20W soldering iron and the tip is 1 or less. The soldering iron should not directly touch the components. Assured to be soldering iron for 1 time. Note: The above profiles are the maximum allowable soldering condition, therefore these profiles are not always recommended. Please read the "Notice for TAIYO YUDEN products" before using this catalog. 115 Ceramic chip components should be preheated to within 100 to 130 of the soldering. Assured to be reflow soldering for 2 times. 100 300 PRECAUTIONS Peak 260 max 10 sec max 200 200 Precautions on the use of Multilayer Ceramic Capacitors Stages 150 100 120 0 4. Soldering 5/6 Gradually cooling Preheating 150 100 Precautions Pb free soldering Temperature 300 260 10 Technical considerations 0 [Hand soldering] Temperature profile 400 300 200 Pb free soldering Temperature 400 350 3 300 120 sec min Ceramic chip components should be preheated to within 100 to 130 of the soldering. Assured to be wave soldering for 1 time. Except for reflow soldering type. 350 max 3 sec max 200 Gradually cooling 60 sec min 60 0 0 190 3216 130 3225 20W1 1 1903216Type max , 1303225 Type min It is recommended to use 20W soldering iron and the tip is 1 or less. The soldering iron should not directly touch the components. Assured to be soldering iron for 1 time. Note: The above profiles are the maximum allowable soldering condition, therefore these profiles are not always recommended. CAPACITORS 100 100 4 Caution 1. Use a 20W soldering iron with a maximum tip diameter of 1.0 mm. 2. The soldering iron should not directly touch the capacitor. 5.Cleaning Cleaning conditions 1. When cleaning the PC board after the capacitors are all 1. The use of inappropriate solutions can cause foreign substances such as flux residue to adhere to the capacitor or deteriorate the capacitor's outer coating, resulting in a mounted, select the appropriate cleaning solution according degradation of the capacitor's electrical propertiesespecially insulation resistance . to the type of flux used and purpose of the cleaninge.g. 2. Inappropriate cleaning conditionsinsufficient or excessive cleaningmay detrimen- to remove soldering flux or other materials from the produc- tally affect the performance of the capacitors. tion process. 2. Cleaning conditions should be determined after verifying, through a test run, that the cleaning process does not affect the capacitor's characteristics. 1Excessive cleaning In the case of ultrasonic cleaning, too much power output can cause excessive vibration of the PC board which may lead to the cracking of the capacitor or the soldered portion, or decrease the terminal electrodes' strength. Thus the following conditions should be carefully checked; Ultrasonic output Below 20 W/ Ultrasonic frequency Below 40 kHz Ultrasonic washing period 5 min. or less 6.Post cleaning processes 1. With some type of resins a decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while left under normal storage conditions resulting in the deterioration of the capacitor's performance. 2. When a resin's hardening temperature is higher than the capacitor's operating temperature, the stresses generated by the excess heat may lead to capacitor damage or destruction. The use of such resins, molding materials etc. is not recommended. 7.Handling Breakaway PC boardssplitting along perforations 1. When splitting the PC board after mounting capacitors and other components, care is required so as not to give any stresses of deflection or twisting to the board. 2. Board separation should not be done manually, but by using the appropriate devices. Mechanical considerations 1. Be careful not to subject the capacitors to excessive mechanical shocks. 1 If ceramic capacitors are dropped onto the floor or a hard surface, they should not be used. 2 When handling the mounted boards, be careful that the mounted components do not come in contact with or bump against other boards or components. Please read the "Notice for TAIYO YUDEN products" before using this catalog. 117 6/6 PRECAUTIONS Precautions on the use of Multilayer Ceramic Capacitors Stages 8.Storage conditions Precautions Technical considerations 1. If the parts are stored in a high temperature and humidity environment, problems Storage 1. To maintain the solderability of terminal electrodes and to such as reduced solderability caused by oxidation of terminal electrodes and dete- keep the packaging material in good condition, care must rioration of taping/packaging materials may take place. For this reason, components be taken to control temperature and humidity in the storage should be used within 6 months from the time of delivery. If exceeding the above area. Humidity should especially be kept as low as possible. period, please check solderability before using the capacitors. Recommended conditions Below 30 Humidity Below 70% RH 4 CAPACITORS Ambient temperature The ambient temperature must be kept below 40. Even under ideal storage conditions capacitor electrode solderability decreases as time passes, so should be used within 6 months from the time of delivery. Ceramic chip capacitors should be kept where no chlorine or sulfur exists in the air. 2. The capacitance value of high dielectric constant capacitors type 2 &3will gradually decrease with the passage of time, so this should be taken into consideration in the circuit design. If such a capacitance reduction occurs, a heat treatment of 150 for 1hour will return the capacitance to its initial level. Please read the "Notice for TAIYO YUDEN products" before using this catalog. 119