H PCB Mount Orientation Designed to comply with physical, electrical and environmental requirements of Micro USB Standard (USB2.0). 10.00 G 9.23 2.60 0.65 0.40 7.40 0.90 5 1 1.35 1.60 1.45 1.90 2.15 PCB Edge 1.88 2.00 0.50 F 1.40 3.90 7.80 E Specifications 5.60 Material Plastic Housing: LCP, UL94V-0, Black (E106764) Contact Terminal: Copper Alloy Metallic Shell: Stainless Steel, SUS 304, T = 0.25mm 6.80 Recommended PCB Layout 5.400.05 As viewed from component side General Tolerance: 0.05 5.00 5.000.30 2.47 1 5 Plating Contact Teminal: Contact Area: 30" Gold plating Solder Tails: Gold Flash Underplating: 50" Nickel Metallic Shell: Matte Tin Mechanical & Environmental Mating Force: 35N max. Unmating Force: 10N min. Durability: 10,000 Cycles 2.85 0.25 A C Component Outline 2.77 A 0.85 D Solder Area 1.85+0.08 -0.02 3.5 Max. Electrical Voltage Rating: 30 V AC Current Rating: Signal (Pins 2,3,4):1.0A. Power (Pins1,5):1.8A. Operating Temperature: -30C to +85C Contact Resistance: 30m max. Insulating Resistance: 1000M min. Dielectric Withstand Voltage: 500V AC/Minute 6.20 Ordering Grid 0.50 6.90+0.05 -0.02 4.75 3.50 USB3100 0.60 0.050.05 2.70 B 30 A Request Samples and Quotation Packing Options A = Tape & Reel Contact Plating 30 = 30" Gold (1.5K per Reel) 0.28 A 0.65 0.24 0.10 Section A-A Part Number Product Description USB3100 Micro USB Receptacle, Type B, Surface Mount, Horizontal, Top (Reverse) Mount, without Peg Drawing Date 1st June 2012 2.60 By Detail 1 2 3 4 Revision Date 5 CC Tolerances (Except as Noted) USB3100 B PCN B5 19/06/18 X.X 2 X.X 0.2 X.XX 1 X.XX 0.10 X.XXX 0.05 X.XXX 0.5 Length Angle 6 Units: Metric (mm) C 3rd Angle Projection 7 This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE www.gct.co Not to Scale Drawn By ASE 8 Sheet No. 1/2 4.0 Start of reel approximately 20 pcs empty carrier 5 1. O 12.0 200mm min. 24.00 G End of reel approximately 20 pcs empty carrier 1.8 H Cover Tape I/O Direction Products P/N PCS/Reel Reels/Carton PCS/Carton USB3100 O1 3. 5 3 4500 Notes: 1. Peeling off force of top tape: 0.1-1.3N 2. Part Conforms to EIA-481-C Standards 3. All dimensions in millimeters 4. 10 sprocket hole pitch cumulative tolerance0.2mm 12 0 o330 10 Cover Tape 1500 3 O2 Peel off Angle F Carrier Tape 120 E Detail F 6 P S Cardboard Detail F Reel D Carton Protection Tape Triangle Liner Vacuum bag Label 160mm C 1500 pieces/reel 450x490x0.15 35 0m B m 35 0m m 3 Reels Part Number Product Description USB3100 Micro USB Receptacle, Type B, Surface Mount, Horizontal, Top (Reverse) Mount, without Peg Drawing Date A 1st June 2012 By Detail Revision Date 1 2 3 4 5 CC Tolerances (Except as Noted) USB3100 B PCN B5 19/06/18 X.X 2 X.X 0.5 X.XX 1 X.XX 0.30 X.XXX 0.20 X.XXX 0.5 Length Angle 6 Units: Metric (mm) C 3rd Angle Projection 7 This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE www.gct.co Not to Scale Drawn By ASE 8 Sheet No. 2/2