TCMT1600, TCMT4600, TCMT4606
www.vishay.com Vishay Semiconductors
Rev. 2.6, 21-Jul-15 1Document Number: 83512
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Optocoupler, Phototransistor Output, AC Input,
Single / Quad Channel, Half Pitch Mini-Flat Package
DESCRIPTION
The low profile miniflat package includes an optocoupler
with AC Input and transistor output. It is available in single
channel (4 pin) TCMT1600 or quad channel (16 pin)
TCMT4600.
FEATURES
• Low profile package (half pitch)
• AC isolation test voltage 3750 VRMS
• Low coupling capacitance of typical 0.3 pF
• Low temperature coefficient of CTR
• Wide ambient temperature range
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Programmable logic controllers
AGENCY APPROVALS
• UL1577, file no. E76222, double protection
• cUL component acceptance service no 5A, double
protection
• DIN EN 60747-5-5 (VDA 0884-5)
• FIMKO: FI EN 60950-1:2006
• BSI: BS EN 60065:2002; BS EN60950-1:2006
• CQC GB 8898-2011, GB 4943.1-2011 (suitable for
installation altitude below 2000 m)
Notes
• Available only on tape and reel.
(1) Product is rotated 180° in tape and reel cavity.
22775
22628-1
CE
AC
4 PIN
16 PIN
12 8
9
ORDERING INFORMATION
TCMT#60#
PART NUMBER
AGENCY CERTIFIED/PACKAGE CTR (%)
SINGLE CHANNEL QUAD CHANNEL
UL, cUL, FIMKO, BSI, VDE 80 to 300 80 to 300 100 to 300
SOP-4 TCMT1600 - -
SOP-4 TCMT1600T3 (1) --
SOP-16 - TCMT4600 TCMT4606
SOP-16 - TCMT4600T0 (1) -
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Forward current IF± 60 mA
Forward surge current tp ≤ 10 μs IFSM ± 1.5 A
Power dissipation Pdiss 100 mW
Junction temperature Tj125 °C
7 mm
SOP-#
TCMT1600, TCMT4600, TCMT4606
www.vishay.com Vishay Semiconductors
Rev. 2.6, 21-Jul-15 2Document Number: 83512
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(2) Wave soldering three cycles are allowed. Also refer to “Assembly Instructions” (www.vishay.com/doc?80054).
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
OUTPUT
Collector emitter voltage VCEO 70 V
Emitter collector voltage VECO 7V
Collector current IC50 mA
Collector peak current tp/T = 0.5, tp ≤ 10 ms ICM 100 mA
Power dissipation Pdiss 150 mW
Junction temperature Tj125 °C
COUPLER
AC isolation test voltage (RMS) VISO 3750 VRMS
Total power dissipation Ptot 250 mW
Operating ambient temperature range Tamb -40 to +100 °C
Storage temperature range Tstg -40 to +125 °C
Soldering temperature (1) Tsld 260 °C
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage IF = ± 50 mA VF- 1.35 1.6 V
Junction capacitance VR = 0 V, f = 1 MHz Cj-8-pF
OUTPUT
Collector emitter voltage IC = 100 μA VCEO 70 - - V
Emitter collector voltage IE = 100 μA VECO 7--V
Collector dark current VCE = 20 V, IF = 0 ICEO --100nA
COUPLER
Collector emitter saturation voltage IF = ± 10 mA, IC = 1 mA VCEsat --0.3V
Cut-off frequency VCE = 5 V, IF = ± 10 mA,
RL = 100 Ωfc- 100 - kHz
Capacitance (input to output) f = 1 MHz CIO -0.3-pF
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
IC/IFVCE = 5 V, IF = ± 5 mA
TCMT1600 CTR 80 300 %
TCMT4600 CTR 80 300 %
TCMT4606 CTR 100 300 %
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
TCMT1600, TCMT4600, TCMT4606
www.vishay.com Vishay Semiconductors
Rev. 2.6, 21-Jul-15 3Document Number: 83512
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Test Circuit, Non-Saturated Operation
Fig. 2 - Test Circuit, Saturated Operation
Fig. 3 - Switching Times
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Delay time VS = 5 V, IC = 2 mA, RL = 100 Ω
(see figure 1) td-3-μs
Rise time VS = 5 V, IC = 2 mA, RL = 100 Ω
(see figure 1) tr-3-μs
Fall time VS = 5 V, IC = 2 mA, RL = 100 Ω
(see figure 1) tf-4.7- μs
Storage time VS = 5 V, IC = 2 mA, RL = 100 Ω
(see figure 1) ts-0.3- μs
Turn-on time VS = 5 V, IC = 2 mA, RL = 100 Ω
(see figure 1) ton -6-μs
Turn-off time VS = 5 V, IC = 2 mA, RL = 100 Ω
(see figure 1) toff -5-μs
Turn-on time VS = 5 V, IF = ± 10 mA, RL = 1 kΩ
(see figure 2) ton -9-μs
Turn-off time VS = 5 V, IF = ± 10 mA, RL = 1 kΩ
(see figure 2) toff -18- μs
100 Ω50 Ω
Channel II
Channel I
IC = 2 mA; Adjusted Through
Input Amplitude
+ 5 V
IF
IF
0
RG = 50 Ω
tp
tp = 50 µs
T= 0.01
Oscilloscope
RL = 1 MΩ
CL = 20 pF
15234
1 kΩ50 Ω
Channel II
Channel I
+ 5 V
IF
0
RG = 50 Ω
tp
tp = 50 µs
T= 0.01
Oscilloscope
RL = 1 MΩ
CL = 20 pF
15235
IF = 10 mA
tpt
t
0
0
10 %
90 %
100 %
tr
td
ton
tstf
toff
IF
IC
tpPulse duration
tdDelay time
trRise time
ton (= td + tr) Turn-on time
tsStorage time
tfFall time
toff (= ts + tf) Turn-off time
96 11698
TCMT1600, TCMT4600, TCMT4606
www.vishay.com Vishay Semiconductors
Rev. 2.6, 21-Jul-15 4Document Number: 83512
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 4 - Total Power Dissipation vs. Ambient Temperature Fig. 5 - Forward Voltage vs. Forward Current
SAFETY AND INSULATION RATINGS
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Climatic classification (according to IEC 68 part 1) 55/110/21
Comparative tracking index CTI 175
Maximum rated withstanding isolation voltage 40 % to 60 % RH, AC test of 1 min VISO 3750 VRMS
Maximum transient isolation voltage VIOTM 6000 V
Maximum repetitive peak isolation voltage VIORM 707 V
Insulation resistance VIO = 500 V, Tamb = 100 °C RIO 1011 Ω
Isolation resistance (under fault conditions) VIO = 500 V, Tamb = TSI RIO 109Ω
Output safety power PSO 350 mW
Input safety current ISI 200 mA
Input safety temperature TSI 175 °C
Apparent charge test voltage (method A) VIORM x 1.6 = VPR, type and sample test
tm = 60 s, partial discharge < 5 pC VPR 1132 Vpeak
Apparent charge test voltage (method B) VIORM x 1.875 = VPR, 100 % production
test with tm = 1 s, partial discharge < 5 pC VPR 1326 Vpeak
Creepage distance ≥ 5mm
Clearance distance ≥ 5mm
Insulation thickness DTI ≥ 0.4 mm
Environment (pollution degree in accordance to DIN VDE 0109) 2
0
50
100
150
200
250
300
0 40 80 120
P
tot
- Total Power Dissipation (mW)
T
amb
- Ambient Temperature (°C)
96 11700
Coupled device
Phototransistor
IR-diode
0.1
1
10
100
0.6 0.8 1.0 1.2 1.4 1.6
IF - Forward Current (mA)
VF - Forward Voltage (V)
Tamb = 110 °C
Tamb = 75 °C
Tamb = 25 °C
Tamb = 0 °C
Tamb = -55 °C
TCMT1600, TCMT4600, TCMT4606
www.vishay.com Vishay Semiconductors
Rev. 2.6, 21-Jul-15 5Document Number: 83512
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 6 - Collector Current vs. Collector Emitter Voltage
Fig. 7 - Leakage Current vs. Ambient Temperature
Fig. 8 - Collector Current vs. Collector Emitter Voltage
Fig. 9 - Normalized Current Transfer Ratio (non-saturated) vs.
Ambient Temperature
Fig. 10 - Normalized Current Transfer Ratio (saturated) vs.
Ambient Temperature
Fig. 11 - Collector Emitter Voltage vs. Ambient Temperature
0
5
10
15
20
25
30
35
40
45
50
55
0 1 2 3 4 5 6 7 8 9 10
IC - Collector Current (mA)
VCE - Collector Emitter Voltage (non-sat) (V)
IF = 30 mA
IF = 35 mA
IF = 1 mA
IF = 20 mA
IF = 15 mA
IF = 10 mA
IF = 5 mA
IF = 25 mA
0.001
0.01
0.1
1
10
100
1000
10 000
I
CE0
- Leakage Current (nA)
T
amb
- Ambient Temperature (°C)
IF= 0 mA
VCE = 40 V
VCE = 24 V
VCE = 12 V
-60 -40 -20 0 20 40 60 80 120100
0
2
4
6
8
10
12
14
00.10.20.30.4
IC- Collector Current (mA)
VCE - Collector Emitter Voltage (V)
IF= 1 mA
IF= 10 mA
IF= 5 mA
IF= 2 mA
0
0.2
0.4
0.6
0.8
1.0
1.2
NCTR - Normalized CTR (non-saturated)
Tamb - Ambient Temperature (°C)
Normalized to CTR value:
IF = 5 mA, VCE = 5 V, Tamb = 25 °C
IF = 5 mA
-60 -40 -20 0 20 40 60 80 120100
TCMT1600, TCMT4600, TCMT4606
www.vishay.com Vishay Semiconductors
Rev. 2.6, 21-Jul-15 6Document Number: 83512
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 12 - Normalized CTR (non-saturated) vs. Forward Current
Fig. 13 - Normalized CTR (saturated) vs. Forward Current
Fig. 14 - FCTR vs. Phase Angle
Fig. 15 - FCTR vs. Collector Current
Fig. 16 - Switching Time vs. Load Resistance
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0.1 1 10 100
NCTR - Normalized CTR (NS)
IF- Forward Current (mA)
Tamb = 0 °C
Tamb = 100 °C
Tamb = 75 °C
Tamb = -55 °C
Tamb = 25 °C
Normalized to:
IF = 5 mA, VCE = 5 V,
Tamb = 25 °C
0
0.2
0.4
0.6
0.8
1.0
1.2
0.1 1 10 100
NCTR - Normalized CTR (sat)
IF- Forward Current (mA)
VCE = 0.4 V
Normalized to:
IF= 5 mA,
VCE = 5 V,
Tamb = 25 °C
Tamb = 0 °C
T= 75 °C
Tamb = -55 °C-
Tamb = 25 °C
Tamb = 100 °C
amb
-160
-140
-120
-100
-80
-60
-40
-20
0
1 10 100 1000
Phase Angle (deg)
f - Frequency (kHz)
VCE = 5 V
RL = 100 Ω
RL = 1000 Ω
0.1
1
10
100
1000
0 5 10 15 20
ton, toff Switching Time (μs)
RL - Load Resistance (kΩ)
toff (μs)
ton (μs)
VCE = 5 V, IC = 2 mA
TCMT1600, TCMT4600, TCMT4606
www.vishay.com Vishay Semiconductors
Rev. 2.6, 21-Jul-15 7Document Number: 83512
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters
2.60 ± 0.20
2.00 ± 0.100.10 ± 0.10
0.4 ± 0.1
7.00 ± 0.30
4.40 typ.
0.2 ± 0.05
0.9
5.00
1.27
7.60
0.60 + 0.20
- 0.30
Lead coplanarity
0.1 max.
Possible footprint
Pin One I.D.
12
43
1.27 nom.
2.85 max.
TCMT1600, TCMT4600, TCMT4606
www.vishay.com Vishay Semiconductors
Rev. 2.6, 21-Jul-15 8Document Number: 83512
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE MARKING
PACKAGING INFORMATION (TAPE AND REEL) in millimeters
Fig. 17 - Tape and Reel Shipping Medium
Fig. 18 - Tape and Reel Packing (3000 parts per reel)
MT1600
V YWW 68
TCMT4600
V YWW 68
Top cover tape
Embossment
Embossed carrier
17998
7.5 ± 0.1
1.75 ± 0.1
16 ± 0.3
8 ± 0.1
2.95 ± 0.1 1.6 ± 0.1
Pin 1
2 ± 0.1 4 ± 0.1 1.55 ± 0.05
7.4 ± 0.1
0.3 ± 0.05
7.4 ± 0.1
5°
4.4
2.6 ± 0.1
2.2 ± 0.1
TCMT1600, TCMT4600, TCMT4606
www.vishay.com Vishay Semiconductors
Rev. 2.6, 21-Jul-15 9Document Number: 83512
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 19 - TTape and Reel Packing for TCMT460X (2000 parts per reel)
Fig. 20 - TTape and Reel Packing for TCMT460XT0 (2000 parts per reel)
SOLDER PROFILES
Fig. 21 - Lead (Pb)-free Reflow Solder Profile According to
J-STD-020 for SMD Devices
HANDLING AND STORAGE CONDITIONS
ESD level: HBM class 2
Floor life: unlimited
Conditions: Tamb < 30 °C, RH < 85 %
Moisture sensitivity level 1, according to J-STD-020
18427
technical drawings
according to DIN
specification
7.4 12
2.2
24
2.6
0.3
16
7.5
10.6
Ø 1.55
1.75
Ø 1.6
5°
Direction of pulling out
18427_1
technical drawings
according to DIN
specification
7.4 12
2.2
24
2.6
0.3
16
7.5
10.6
Ø 1.55
1.75
Ø 1.6
5°
Direction of pulling out
0
50
100
150
200
250
300
0 50 100 150 200 250 300
Time (s)
Temperature (°C)
240 °C 245 °C
max. 260 °C
max. 120 s max. 100 s
217 °C
max. 30 s
max. ramp up 3 °C/s
max. ramp down 6 °C/s
19841
255 °C
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED