ENEC/CQC: 5 (2.5) A, 125 Vac/250 Vac (50000 cycles) UL/cUL: 10 A 11/2 HP, 125 Vac/250 Vac (100000 cycles) MICRO SWITCHTM V15 Series Ordering Instructions V15 T 16 C Z 200 A 01 XX K Switch type Temp. grade C Electrical rating Terminal style Circuit code Operating force at pin plunger, max. Lever position Lever type Special designator Mounting holes T T125 5 ENEC/CQC: 5 (2.5) A, 125 Vac/250 Vac (50000 cycles) H T150 10 UL/cUL: 10 A 11/2 HP, 125 Vac/250 Vac (100000 cycles) MICRO SWITCHTM VBasic Switch Standard (V15 Series) ENEC/CQC: 11(3) A, 125/150 Vac 25T85 5E4 S T85 11 UL/cUL: 11(3) A, 125/150 Vac 25T85 5E4 Quick connect 6,35 mm x 0,80 mm C [0.250 in x 0.032 in] D Quick connect 4,80 mm x 0,8 mm [0.187 in x 0.032 in] Quick connect 4,80 mm x 0,5 mm E [0.187 in x 0.020 Z SPDT 100 100 gf 0.98 N SPSTNO 200 200 gf 1.96N P SPST- C NC 300 gf 300 2.94 N No lever pin plunger A Far from pin plunger No lever pin plunger 01 Short straight lever Std. straight B Near pin plunger 02 lever in] ENEC/CQC: 16(4)A 250 Vac 16 UL/cUL: 16 1/2HP 125/250 Vac H Push-in terminals 400 400 gf 3.92 N 03 Long straight lever 04 Simulated roller lever ENEC/CQC: 22(8) A, 250 Vac 22 UL/cUL: 22 A 1HP, 125/250 Vac ENEC: 26 26(10) A, 250 Vac 05 Roller lever 06 Disclaimer: Not all configurations are immediately available. Long roller lever 99 Special lever A special designator letter is used only when Terminal Type is "X" or Actuator/Lever Type is "99" to specify that the terminals or the actuator of the switch is special. Review Product Specification to determine the exact differences. Metric O3,1 mm K USA O2,9 mm +1-815-235-6545 Fax