S07B / 07D / 07G / 07J / 07M Vishay Semiconductors Small Signal Fast Switching Diode, High Voltage Features * * * * * For surface mounted applications Low profile package e3 Ideal for automated placement Glass passivated High temperature soldering: 260 C/ 10 seconds at terminals * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 17249 Mechanical Data Case: JEDEC DO-219AB (SMF(R)) Plastic case Polarity: Band denotes cathode end Weight: approx. 15 mg Packaging codes-options: GS18 / 10 k per 13" reel (8 mm tape), 50 k/box GS08 / 3 k per 7" reel (8 mm tape), 30 k/box Parts Table Part Ordering code Marking S07B-GS18 or S07B-GS08 S07D S07D-GS18 or S07D-GS08 SD Tape and Reel S07G S07G-GS18 or S07G-GS08 SG Tape and Reel S07J S07J-GS18 or S07J-GS08 SJ Tape and Reel S07M S07M-GS18 or S07M-GS08 SM Tape and Reel Document Number 85733 Rev. 1.8, 13-Apr-05 SB Remarks S07B Tape and Reel www.vishay.com 1 S07B / 07D / 07G / 07J / 07M Vishay Semiconductors Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Test condition Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Part Symbol Value Unit S07B VRRM 100 V S07D VRRM 200 V S07G VRRM 400 V V S07J VRRM 600 S07M VRRM 1000 V S07B VRMS 70 V S07D VRMS 140 V S07G VRMS 280 V S07J VRMS 420 V S07M VRMS 700 V S07B VDC 100 V S07D VDC 200 V S07G VDC 400 V S07J VDC 600 V VDC 1000 V Maximum average forward rectified current T = 75 C1) tp IF(AV) 1.5 A TA = 65 C1) IF(AV) 0.7 A TL = 25 C IFSM 25 A S07M Peak forward surge current 8.3 ms single half sine-wave 1) Averaged over any 20 ms period Thermal Characteristics Tamb = 25 C, unless otherwise specified Parameter Test condition Symbol Value Unit RthJA 180 K/W TJ, TSTG - 55 to + 150 C Thermal resistance junction to ambient air2) Operating junction and storage temperature range 2) Mounted on epoxy substrate with 3 x 3 mm CU pads ( 40 m thick) Electrical Characteristics Tamb = 25 C, unless otherwise specified Parameter Maximum instantaneous forward voltage Test condition 1.0 A3) Maximum DC reverse current at TA = 25 C rated DC blocking voltage Reverse recovery time Min Typ. Unit 1.1 V IR 10 A A IR 50 IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 1.8 Cj 4 s pF Pulse test: 300 pulse width, 1 % duty cycle www.vishay.com 2 Max VF TA = 125 C Typical capacitance at 4 V, MHz 3) Symbol Document Number 85733 Rev. 1.8, 13-Apr-05 S07B / 07D / 07G / 07J / 07M Vishay Semiconductors Typical Characteristics (Tamb = 25 C unless otherwise specified) 1.2 Instantaneous Reverse Current (A) 100 Average Forward Current (A) Resistive or Inductive Load 1.0 0.8 0.6 0.4 0.2 3.0 x 3.0mm 40 m Thick Copper Pad Areas 0 17375 0 20 40 60 80 100 120 140 TJ = 100C TJ = 75C TJ = 50C 0.1 TJ = 25C 0 100 200 300 400 500 600 700 800 900 Instantaneous Reverse Voltage (V) 17377 Figure 3. Typical Instantaneous Reverse Characteristics 10 1000 Instantaneous Forward Current (mA) TJ = 125C 1 0.01 160 Ambient Temperature (jC) Figure 1. Forward Current Derating Curve 9 8 7 TJ = 150C C (pF) TJ = 25C TJ = 100C 6 5 4 3 2 1 100 600 17376 TJ = 150C 10 0 700 800 900 1000 1100 Instantaneous Forward Voltage (mV) Figure 2. Typical Instantaneous Forward Characteristics Document Number 85733 Rev. 1.8, 13-Apr-05 17378 0 5 10 15 20 25 30 35 40 VR (V) Figure 4. Capacitance vs. Reverse Voltage www.vishay.com 3 S07B / 07D / 07G / 07J / 07M Vishay Semiconductors Package Dimensions in mm (Inches) 0.85 (0.033) 0.35 (0.014) 3.9 (0.152) 3.5 (0.137) 5 0.16 (0.006) 0.99 (0.039) 0.97 (0.038) Z 5 Cathode Band Top View Detail Z enlarged 1.9 (0.074) 1.7 (0.066) 1.2 (0.047) 0.8 (0.031) 0.10 max 2.9 (0.113) 2.7 (0.105) ISO Method E Mounting Pad Layout 1.6 (0.062) 1.3 (0.051) 1.4 (0.055) 17247 www.vishay.com 4 Document Number 85733 Rev. 1.8, 13-Apr-05 S07B / 07D / 07G / 07J / 07M Vishay Semiconductors Blistertape for SMF PS 18513 Document Number 85733 Rev. 1.8, 13-Apr-05 www.vishay.com 5 S07B / 07D / 07G / 07J / 07M Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 6 Document Number 85733 Rev. 1.8, 13-Apr-05 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: S07J-GS08 S07B-GS08 S07D-GS08 S07G-GS08 S07M-GS08 S07M-GS18 S07B-GS18 S07D-GS18 S07GGS18 S07J-GS18