86
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT11 Series
— Connectors for coaxial cables —
Features
Cost efficient termination
Highly efficient and reliable single motion crimp termination allows high volume production with semi-
automatic equipment.
Lock-release latching system
Shock / vibration resistant electrical connections
Verification of the full contact insertion
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
87
GT11 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
15.4
8(7.8)
7.3
P=3.3
23
(6)
T=0.4
23.3
24.3
5
LOT No.
25.3
9.6
21
6.2
24.3
2
5
1
8
1.95 1.95
11.5
18
22
0.64
1
14.5
18
22
For Double-Conductor coaxial shielded cable
Item
Outer terminal
Insulator
Material
Brass
PBT
Finish
Tin plating
Color: Dark gray
* The suitable terminals might differ depending on the internal structure of the cable.
* The suitable terminals might differ depending on the internal structure of the cable.
F Connectors
Outer terminals
GT11L-2S-4.3C
Inner Terminals
M Connectors
Outer terminals
Inner Terminals
GT11-2S-5.2C(70)
GT11-2S-6.0C(70)
761-0002-3-70
761-0028-7-70
Part Number CL No. Applicable Cable
4.5 to 5.2mm
5.8 to 6.2mm
GT11-1822SCF(70)
GT11-2428SCF(70)
761-0004-9-70
761-0020-5-70
Part Number CL No.
Conductor Size (AWG)
Material Finish Packaging
#18 to 22
#24 to 28
Phosphor
Bronze Tin plating 8,000 pcs.
per reel
GT11-2P-5.2C
(70)
GT11-2P-6.0C
(70)
761-0001-0-70
761-0027-4-70
Part Number CL No. Applicable Cable
4.5 to 5.2mm
5.8 to 6.2mm
GT11-1822PCF
(70)
GT11-2428PCF
(70)
761-0003-6-70
761-0019-6-70
Part Number CL No.
Conductor Size (AWG)
Material Finish Packaging
#18 to 22
#24 to 28 Brass Tin plating 8,000 pcs.
per reel
Item
Outer terminal
Insulator
Material
Brass
PBT
Finish
Tin plating
Color: Dark gray
RoHS
YES
RoHS
YES
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
88
GT11 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
13.35
30
11.6
12.8
(13.4)
CAV No
For Double-Conductor coaxial shielded cable
13.7
35.8
13.7 15.35
B
Shown with inserted retainer
Part Number
GT11-2S-HU
CL No. Material Color
761-0005-1 PBT Light gray
Part Number
GT11-2P-HU
CL No. Material Color
761-0006-4 PBT Light gray
F Connectors
Housing
M Connectors
Housing B
Shown with inserted retainer
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
89
GT11 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
B
Fully mated connector assemblies
Part Number
GT11N-2PP-HU
CL No. Material Color
761-0008-0 PBT Light gray
B
Shown with inserted retainer
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
90
GT11 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
BRecommended Board Mounting Pattern
M Connectors
Housing
Part Number
GT11-2P-DS(70)
CL No. Material Finish Color
PBT
Brass
PBT
Phosphor bronze
----
Tin plating
----
Tin plating
Light gray
----
Dark gray
----
761-0007-7-70
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
91
GT11 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
B
Recommended
Panel Cut-out
Part Number
GT11X-2/2P-DS(70)
CL No. Material Finish Color
PBT
Brass
PBT
Phosphor bronze
----
Tin plating
----
Tin plating
Light gray
----
Dark gray
----
761-0022-0-70
Part Number
GT11-2P-DSA(70)
CL No. Material Color
761-0038-0-70 PBT Light gray
Housing (2-position Type) B
Fully mated connector
assemblies
BRecommended Board
Mounting Pattern
Housing (Straight Type)
15.7
31.6
T=1.6
GT11-2S-HU
GT11-2P-DSA(70)
B
Recommended Board Mounting Pattern
B
Fully mated connector assemblies
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
92
GT11 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
45.4
32.5
16.912.7
Waterproof type For Double-Conductor coaxial shielded cable
F Connectors
Housing
M Connectors
Housing
Housing
16.9
44.2
24.1
21.3
20.5
16.9
46.7
26.6
21.7
10.15
20.5
YES
Part Number
GT11W-2P-HU
CL No. Material Color
761-0023-3 PBT Light Gray
RoHS
YES
Part Number
GT11W-2S-HU
CL No. Material Color
761-0024-6 PBT Light Gray
RoHS
YES
Part Number
GT11WM-2P-HU
CL No. Material Color
----------- PBT Light Gray
RoHS
B
Fully mated connector assemblies
B
Fully mated connector assemblies
(It is planning)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
93
GT11 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
19.3 13.15
15.6
0.6
Part Number
GT11W-6.0R
CL No. Material
761-0025-9 PBT
Silicon rubber compound
Retainer (used with GT11W-2S-HU and GT11W-2P-HU)
Retainer (used with GT11W-2S-HU and GT11W-2P-HU)
Retainer Cover
17.8
22.45 9.45
26.5
23.8
15.1
3.7
RoHS
YES
Part Number
GT11W-5.2R
CL No. Material
------------- PBT
Silicon rubber compound
RoHS
YES
Part Number
GT11WM-COVER(A),(B)
CL No. Material
------------- PBT
Silicon rubber compound
RoHS
YES
* Waterproofness will depend on the cable. Please contact a Hirose Electric
sales representative for further information when using this product.
* Waterproofness will depend on the cable. Please contact a Hirose Electric
sales representative for further information when using this product.
Note : for GT11WM-5.2R
(It is planning)
(It is planning)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
94
GT11 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
29.5
30
14.6
31.2
35.8
17.85
Waterproof type For Double-Conductor coaxial shielded cable
Part Number
GT11K-2/2S-HU
CL No. Material Color
761-0039-3 PBT Light gray
* Mates only with GT11KN-2/2PP-HU.
Part Number
GT11KN-2/2PP-HU
CL No. Material Color
761-0040-2 PBT Light gray
F Connectors
Housing
B
Shown with inserted retainer
B
Shown with inserted retainer
M Connectors
Housing
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
95
GT11 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Strip the cable.
Cut the shield and expose the wire.
Cut back the shield above the sheath and wrap with
conductive tape.
Strip the wire and form it.
Crimp the wire to the internal terminal.
Jig used: Automatic crimping machine.
(Refer to Page 103 for detail.)
Insert the internal terminals into the Outer terminals.
Crimp the Outer terminal.
Jig used: Outside tube caulking jig.
(Refer to Page 103 for detail.)
Insert the terminal into the housing.
(Please insert until the terminal is stopped by the lance.)
Mount the retainer to complete the task.
Refer to Page 96 for information
about the retainer mounting
method.
BTermination sequence
Cable
Shield
Wire
Conductor
1mm max.
The shield must be visible.
The joined side of the crimp portion faces upward
(for both male and female).
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
96
GT11 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
d. If locking is not complete,
press the rear portion of
the retainer again while
pulling it backward.
c. Press the rear portion of
the retainer and snap it
into the locked position.
b. Push in while changing
the angle of the retainer
until the front surface
comes to a stop.
a. Insert so that the terminal
locking tab is inserted
between the top surface of
the terminal and the
housing.
* Check that all locations are locked.
* Check that the bands are housed in all of the receiving areas.
BRetainer Mounting Method
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
97
GT11 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
BTermination Tools
Item
Capacity
Stroke
Number of strokes
Weight
Motor
Crimping speed
Specification
1.5tons
30mm
200spm (50Hz)
75kg
0.2kW
2000 to 4000 pcs. per hour
Remarks
200spm (60Hz)
AC100V
Specifications
User's manuals are available. Please ask your Hirose Electric account representative.
Please contact a sales representative for information about the outer terminal crimping tool.
Part Number CM-105
Automatic Crimping Machine (for 2-conductor and 8-conductor cable)
Outer Terminal Crimping tool
Note: See the table below for the applicator product number.
Product No.
GT11-1822SCF(70)
GT11-1822PCF(70)
GT11-2428SCF(70)
GT11-2428PCF(70)
Applicator Product No. (2 conductor) Applicator Product No. (8 conductor)
Applicator 105-GT11-1822S-2
Applicator 105-GT11-1822P-2
Applicator 105-GT11-2428S-2
Applicator 105-GT11-2428P-2
Applicator 105-GT11-1822S
Applicator 105-GT11-1822P
Applicator 105-GT11-2428S
Applicator 105-GT11-2428P
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
98
GT11 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
1.95
11.5
1.95
13
8.4
2.8
11.88.25
4.1
12.7
0.4
9.15
21.7
29.7
For 8-Conductor coaxial shielded cable
Part Number CL No.
Conductor Size (AWG)
Material Finish
GT11-1822SCF(70) 761-0004-9-70 #18 to 22 Phosphor bronze Tin plating
GT11-2428SCF(70) 761-0020-5-70 #24 to 28 Phosphor bronze Tin plating
Part Number CL No. Material
GT11-8DS-2.8C 761-0014-2 PBT
Part Number CL No. Material Finish
GT11-8DS-5C(70) 761-0015-5-70 Brass Tin plating
F Connectors
Inner Terminal
Insulator
Outer terminals
RoHS
YES
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
99
GT11 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
24.35
12.7
9
4.5
0.4
6.5
3415.8
19.7
15.9
6
14.1
4.4
2.7
10.55
Part Number CL No. Material Finish
GT11-8DS-SB(70) 761-0016-8-70 Brass Tin plating
Part Number CL No. Material
GT11-8DS-HU 761-0017-0 PBT
Part Number CL No. Material
GT11-8DS-6R 761-0018-3 PBT
Shield Plate
Housing
Retainer (used with GT11-8DS-HU)
RoHS
YES
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
100
GT11 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
14.5
0.64
1
18.4
7.5
13.19.35
8.4
2.8
4.1
1.25
14 10.25
25.1
33.1
0.4
Part Number CL No.
Conductor Size (AWG)
Material Finish
GT11-1822PCF(70) 761-0003-6-70 #18 to 22 Brass Tin plating
GT11-2428PCF(70) 761-0019-6-70 #24 to 28 Brass Tin plating
Part Number CL No. Material
GT11-8DP-2.8C 761-0009-2 PBT
Part Number CL No. Material Finish
GT11-8DP-5C(70) 761-0010-1-70 Brass Tin plating
M Connectors
Inner Terminals
Insulator
Outer terminal
RoHS
YES
RoHS
YES
RoHS
YES
Note: Sold by the reel
(8,000 pieces per reel)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
101
GT11 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
24.65
14
5
6.5
10
0.4
39.6
25
17.65
13.5 3.5
2518.3
15.35
6
4.4
2.7
11.6
Part Number CL No. Material Finish
GT11-8DP-SB(70) 761-0011-4-70 Brass Tin plating
Part Number CL No. Material
GT11-8DP-HU 761-0012-7 PBT
Part Number CL No. Material
GT11-8DP-6R ------- PBT
* Reserved for product expansion
Shield Plate
Housing
Retainer (Used with GT11-8DS-HU)
RoHS
YES
RoHS
YES
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
102
GT11 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
24.7
16.8
6
18.83
29.95
22.25
14.3
1.3
5
1.3 3
2.8
13.25
8.4
2.8
Part Number CL No. Item Material Finish
Housing PBT
Outer Terminal Phosphor bronze Tin plating
GT11-8DP-2.8DS(70) 761-0021-8-70 Insulator PBT
Terminal Brass Tin plating
44
GT11-8DS-2.8C
GT11-8DP-2.8DS(70)
Board
Printed Circuit Board Type
B
Recommended Board Mounting Pattern
BFully mated connector assemblies
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
103
GT11 Series
GT 5 GT 13 GT 16 PO5G GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
BTermination sequence
Strip the Jacket.
Cut the shield and expose
the wire.
Cut back the shield above
the jacket and wrap with
conductive tape.
Strip the wire.
Crimp the internal terminals.
Insert the inner terminals into the insulated case.
Insert what was made in Step into the Outer
terminal.
Insert the caulking shield cover onto the Outer
terminal.
Insert what was made in Step into the housing.
Insert the retainer.
Jacket Shield
Wire
Conductive tape
Internal terminal
Inshulated case
Outer terminal
Shield cover
Housing
Retainer Completion
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
104
GT11 Series
GT 5GT 13GT 16PO5GGT 11GT 14GT 17GT 19GT 3GT 6WGT 7GT 10GT 18WGT 15GT 8GT 9GT 25
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Please contact a sales representative for information about the outer terminal crimping tool.
BTermination Tools
User's manuals are available. Please ask your Hirose Electric account representative.
Item Specification Remarks
Capacity 1.5Ton
Stroke 30mm
Number of strokes 200spm (50Hz) 240spm (60Hz)
Weight 75kg
Motor 0.2kW AC100V
Crimping speed 2000 to 4000 pcs. per hour
Part Number CM-105
Specifications
Automatic Crimping Machine (for 2-conductor and 8-conductor cable)
Outer terminal Caulking Jig (for 8-conductor cable)
Product Number
Applicator Product Number (2-conductor type) Applicator Product Number (8-conductor type)
GT11-1822SCF(70) Applicator 105-GT11-1822S-2 Applicator 105-GT11-1822S
GT11-1822PCF(70) Applicator 105-GT11-1822P-2 Applicator 105-GT11-1822P
GT11-2428SCF(70) Applicator 105-GT11-2428S-2 Applicator 105-GT11-2428S
GT11-2428PCF(70) Applicator 105-GT11-2428P-2 Applicator 105-GT11-2428P
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
