The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT 5 GT 13 PO5G GT 16 GT11 Series GT 7 GT 6W GT 3 GT 19 GT 17 GT 14 GT 11 -- Connectors for coaxial cables -- GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines 86 Features Cost efficient termination Highly efficient and reliable single motion crimp termination allows high volume production with semiautomatic equipment. Lock-release latching system Shock / vibration resistant electrical connections Verification of the full contact insertion The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT11 Series 24.3 1 GT 13 F Connectors GT 5 24.3 23.3 15.4 2 Outer terminals 8 P=3.3 7.3 3 (6) 5 5 T=0.4 (7.8) PO5G LOT No. CL No. Item Applicable Cable RoHS Material Finish Brass PBT Tin plating Color: Dark gray Inner Terminals 1.95 GT 14 GT11-2S-5.2C(70) 761-0002-3-70 4.5 to 5.2mm Outer terminal YES GT11-2S-6.0C(70) 761-0028-7-70 5.8 to 6.2mm Insulator * The suitable terminals might differ depending on the internal structure of the cable. GT 11 GT11L-2S-4.3C Part Number GT 16 8 2 1.95 Conductor Size (AWG) Material Finish Packaging RoHS #18 to 22 #24 to 28 Phosphor Bronze Tin plating 8,000 pcs. per reel YES GT 6W CL No. 761-0004-9-70 761-0020-5-70 GT 3 Part Number GT11-1822SCF(70) GT11-2428SCF(70) GT 19 11.5 GT 17 18 22 25.3 M Connectors 1 GT 7 2 Outer terminals 9.6 6.2 GT 10 CL No. GT11-2P-5.2C(70) GT11-2P-6.0C(70) 761-0001-0-70 761-0027-4-70 Applicable Cable RoHS 4.5 to 5.2mm 5.8 to 6.2mm YES Item Material Finish Outer terminal Insulator Brass PBT Tin plating Color: Dark gray GT 18W Part Number Inner Terminals 0.64 1 GT 15 * The suitable terminals might differ depending on the internal structure of the cable. CL No. Conductor Size (AWG) Material #18 to 22 #24 to 28 Brass Finish GT 25 Part Number GT11-1822PCF(70) 761-0003-6-70 GT11-2428PCF(70) 761-0019-6-70 GT 9 14.5 GT 8 18 22 Packaging RoHS pcs. Tin plating 8,000 per reel YES 87 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines For Double-Conductor coaxial shielded cable The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT 5 GT 13 For Double-Conductor coaxial shielded cable BShown with inserted retainer F Connectors (13.4) PO5G 13.35 GT 16 Housing CAV No Part Number CL No. Material Color RoHS GT11-2S-HU 761-0005-1 PBT Light gray YES M Connectors 35.8 13.7 GT 7 88 Part Number CL No. Material Color RoHS GT11-2P-HU 761-0006-4 PBT Light gray YES BShown with inserted retainer 13.7 15.35 Housing GT 6W GT 3 GT 19 GT 17 GT 14 GT 11 12.8 11.6 30 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT11 Series The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT11 Series GT 5 GT 13 GT 16 BFully mated connector assemblies PO5G GT 11 CL No. Material Color RoHS GT11N-2PP-HU 761-0008-0 PBT Light gray YES GT 14 Part Number GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 89 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines BShown with inserted retainer The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BRecommended Board Mounting Pattern Housing GT 5 PO5G GT 16 GT 13 M Connectors GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT11 Series 90 Part Number CL No. Material PBT Brass GT11-2P-DS(70) 761-0007-7-70 PBT Phosphor bronze Finish Color RoHS ---Tin plating ---Tin plating Light gray ---Dark gray ---- YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT11 Series GT 5 BRecommended Panel Cut-out GT 13 GT 16 PO5G BRecommended Board Mounting Pattern GT 11 CL No. GT11X-2/2P-DS(70) 761-0022-0-70 Finish Color RoHS PBT Brass PBT Phosphor bronze ---Tin plating ---Tin plating Light gray ---Dark gray ---- YES BRecommended Board Mounting Pattern Housing (Straight Type) GT 17 Material GT 14 Part Number GT 19 GT 3 GT11-2P-DSA(70) 761-0038-0-70 PBT Color RoHS Light gray YES T=1.6 Material 15.7 CL No. GT 10 Part Number GT11-2P-DSA(70) GT 7 31.6 GT11-2S-HU GT 6W BFully mated connector assemblies GT 18W GT 15 GT 8 GT 9 GT 25 91 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines BFully mated connector assemblies Housing (2-position Type) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT 5 Waterproof type For Double-Conductor coaxial shielded cable 45.4 Housing GT 16 16.9 GT 13 F Connectors 12.7 Part Number GT11W-2S-HU CL No. Material Color RoHS PBT Light Gray YES 761-0024-6 16.9 M Connectors Housing GT 17 GT 14 GT 11 PO5G 32.5 20.5 44.2 21.3 GT 19 24.1 Part Number CL No. Material Color RoHS GT11W-2P-HU 761-0023-3 PBT Light Gray YES 16.9 Housing GT 18W GT 10 GT 7 GT 6W GT 3 BFully mated connector assemblies 20.5 46.7 GT 8 21.7 10.15 GT 15 26.6 GT 9 BFully mated connector assemblies GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT11 Series 92 Part Number CL No. Material Color RoHS GT11WM-2P-HU ----------- PBT Light Gray YES (It is planning) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT11 Series GT 5 GT 13 GT 16 19.3 13.15 Material RoHS GT 11 GT11W-6.0R CL No. 15.6 0.6 PO5G Part Number PBT YES 761-0025-9 Silicon rubber compound GT 14 * Waterproofness will depend on the cable. Please contact a Hirose Electric sales representative for further information when using this product. Retainer (used with GT11W-2S-HU and GT11W-2P-HU) GT 17 GT 19 GT 3 (It is planning) GT11W-5.2R CL No. ------------- Material GT 6W Part Number RoHS PBT YES Silicon rubber compound GT 7 * Waterproofness will depend on the cable. Please contact a Hirose Electric sales representative for further information when using this product. 9.45 23.8 15.1 26.5 GT 18W 17.8 22.45 GT 10 3.7 Retainer Cover GT 15 GT 8 (It is planning) Part Number Note : for GT11WM-5.2R ------------- Material RoHS PBT YES Silicon rubber compound GT 9 GT11WM-COVER(A),(B) CL No. GT 25 93 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines Retainer (used with GT11W-2S-HU and GT11W-2P-HU) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. F Connectors Housing GT 5 GT 14 14.6 GT 11 PO5G GT 16 GT 13 Waterproof type For Double-Conductor coaxial shielded cable 30 29.5 Part Number CL No. Material Color RoHS GT11K-2/2S-HU 761-0039-3 PBT Light gray YES * Mates only with GT11KN-2/2PP-HU. M Connectors Housing GT 7 GT 6W GT 3 GT 19 GT 17 BShown with inserted retainer GT 15 17.85 GT 18W GT 10 31.2 GT 8 35.8 GT 9 BShown with inserted retainer Part Number GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT11 Series 94 CL No. GT11KN-2/2PP-HU 761-0040-2 Material Color RoHS PBT Light gray YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT11 Series GT 5 Shield GT 13 Insert the internal terminals into the Outer terminals. Strip the cable. The joined side of the crimp portion faces upward (for both male and female). GT 16 Cable PO5G GT 11 Cut the shield and expose the wire. GT 14 Wire The shield must be visible. GT 19 Cut back the shield above the sheath and wrap with conductive tape. GT 17 Crimp the Outer terminal. GT 7 Strip the wire and form it. GT 6W Insert the terminal into the housing. (Please insert until the terminal is stopped by the lance.) GT 3 Jig used: Outside tube caulking jig. (Refer to Page 103 for detail.) Conductor GT 10 GT 18W GT 15 Crimp the wire to the internal terminal. Mount the retainer to complete the task. GT 8 1mm max. GT 9 Refer to Page 96 for information about the retainer mounting method. GT 25 Jig used: Automatic crimping machine. (Refer to Page 103 for detail.) 95 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines BTermination sequence The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. a. Insert so that the terminal locking tab is inserted between the top surface of the terminal and the housing. b. Push in while changing the angle of the retainer until the front surface comes to a stop. c. Press the rear portion of the retainer and snap it into the locked position. GT 5 GT 9 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 3 GT 19 GT 17 GT 14 GT 11 PO5G GT 16 GT 13 BRetainer Mounting Method d. If locking is not complete, press the rear portion of the retainer again while pulling it backward. GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT11 Series * Check that all locations are locked. * Check that the bands are housed in all of the receiving areas. 96 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT11 Series GT 5 GT 13 User's manuals are available. Please ask your Hirose Electric account representative. Automatic Crimping Machine (for 2-conductor and 8-conductor cable) GT 16 Capacity 1.5tons Stroke 30mm Number of strokes 200spm (50Hz) Weight 75kg Motor 0.2kW Crimping speed 2000 to 4000 pcs. per hour Remarks 200spm (60Hz) AC100V GT 14 Specification GT 11 Item PO5G Specifications Part Number CM-105 Product No. Applicator Product No. (2 conductor) Applicator Product No. (8 conductor) Applicator 105-GT11-1822S-2 Applicator 105-GT11-1822P-2 Applicator 105-GT11-2428S-2 Applicator 105-GT11-2428P-2 Applicator 105-GT11-1822S Applicator 105-GT11-1822P Applicator 105-GT11-2428S Applicator 105-GT11-2428P GT 6W Please contact a sales representative for information about the outer terminal crimping tool. GT 3 Outer Terminal Crimping tool GT 19 GT11-1822SCF(70) GT11-1822PCF(70) GT11-2428SCF(70) GT11-2428PCF(70) GT 17 Note: See the table below for the applicator product number. GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 97 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines BTermination Tools The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT 5 GT 13 For 8-Conductor coaxial shielded cable 1.95 1.95 F Connectors Part Number CL No. GT11-1822SCF(70) 761-0004-9-70 GT11-2428SCF(70) 761-0020-5-70 Conductor Size (AWG) Material #18 to 22 Phosphor bronze #24 to 28 Phosphor bronze Finish Tin plating Tin plating RoHS YES 13 Insulator 11.8 GT 19 GT 17 GT 14 GT 11 PO5G 11.5 GT 16 Inner Terminal GT 3 8.4 4.1 GT 7 GT 6W 8.25 2.8 CL No. 761-0014-2 Material PBT RoHS YES Outer terminals 12.7 9.15 GT 9 GT 8 0.4 Part Number GT11-8DS-5C(70) 98 CL No. 761-0015-5-70 Material Brass Finish Tin plating RoHS YES 29.7 21.7 GT 15 GT 18W GT 10 Part Number GT11-8DS-2.8C GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT11 Series The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT11 Series GT 5 0.4 GT 13 12.7 4.5 PO5G 24.35 GT 16 GT 11 CL No. 761- 0016-8-70 Material Brass Finish Tin plating RoHS GT 14 Part Number GT11-8DS-SB(70) 6.5 9 YES GT 17 Housing 15.9 GT 3 19.7 34 GT 19 15.8 GT 6W GT 7 Part Number GT11-8DS-HU CL No. 761-0017-0 Material PBT RoHS YES GT 10 GT 18W Retainer (used with GT11-8DS-HU) GT 15 4.4 14.1 GT 8 CL No. 761-0018-3 Material PBT RoHS 6 GT 25 Part Number GT11-8DS-6R GT 9 10.55 2.7 YES 99 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines Shield Plate The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT 5 1 0.64 Inner Terminals Part Number CL No. GT11-1822PCF(70) 761-0003-6-70 GT11-2428PCF(70) 761-0019-6-70 Conductor Size (AWG) #18 to 22 #24 to 28 Material Brass Brass Finish Tin plating Tin plating RoHS Note: Sold by the reel (8,000 pieces per reel) YES 18.4 Insulator 7.5 GT 3 13.1 GT 19 GT 17 GT 14 GT 11 PO5G 14.5 GT 16 GT 13 M Connectors 8.4 Part Number GT11-8DP-2.8C CL No. 761-0009-2 Material PBT 9.35 RoHS YES Outer terminal 14 10.25 GT 9 0.4 Part Number GT11-8DP-5C(70) 100 CL No. 761-0010-1-70 Material Brass Finish Tin plating RoHS YES 33.1 GT 8 25.1 GT 15 GT 18W GT 10 GT 7 4.1 GT 6W 1.25 2.8 GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT11 Series The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT11 Series GT 5 14 GT 13 GT 16 PO5G 10 5 0.4 6.5 GT 11 CL No. 761-0011-4-70 Material Brass Finish Tin plating RoHS GT 14 Part Number GT11-8DP-SB(70) YES GT 17 Housing 39.6 25 GT 3 17.65 GT 19 25 13.5 Material PBT RoHS GT 10 CL No. 761-0012-7 GT 7 18.3 3.5 GT 6W Part Number GT11-8DP-HU YES GT 18W Retainer (Used with GT11-8DS-HU) GT 15 4.4 15.35 GT 8 GT 9 11.6 2.7 GT 25 Part Number CL No. GT11-8DP-6R ------* Reserved for product expansion Material PBT RoHS 6 YES 101 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines 24.65 Shield Plate The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BRecommended Board Mounting Pattern GT 13 GT 5 Printed Circuit Board Type 29.95 22.25 3 6 PO5G 18.8 GT 16 24.7 16.8 5 GT 11 1.3 3 14.3 2.8 8.4 13.25 GT 14 2.8 1.3 BFully mated connector assemblies 44 GT 17 GT11-8DP-2.8DS(70) GT 19 Board GT 9 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 3 Part Number GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT11 Series 102 CL No. Item Material Housing PBT Outer Terminal Phosphor bronze GT11-8DP-2.8DS(70) 761-0021-8-70 Insulator PBT Terminal Brass Finish Tin plating Tin plating RoHS YES GT11-8DS-2.8C The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT11 Series GT 5 Shield GT 16 Inshulated case Jacket GT 13 Insert the inner terminals into the insulated case. Strip the Jacket. PO5G Insert what was made in Step into the Outer terminal. GT 14 Outer terminal Wire GT 11 Cut the shield and expose the wire. GT 17 Insert the caulking shield cover onto the Outer terminal. Shield cover GT 3 Conductive tape GT 7 Housing GT 6W Insert what was made in Step into the housing. Strip the wire. GT 19 Cut back the shield above the jacket and wrap with conductive tape. GT 10 GT 18W Crimp the internal terminals. Insert the retainer. GT 15 Internal terminal Completion GT 8 Retainer GT 9 GT 25 103 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines BTermination sequence The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. User's manuals are available. Please ask your Hirose Electric account representative. Automatic Crimping Machine (for 2-conductor and 8-conductor cable) Specifications GT 5 GT 16 GT 13 BTermination Tools PO5G Item GT 11 GT 14 GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT11 Series 104 Part Number CM-105 Specification Remarks Capacity 1.5Ton Stroke 30mm Number of strokes 200 spm (50Hz) Weight 75kg Motor 0.2kW Crimping speed 2000 to 4000 pcs. per hour Product Number GT11-1822SCF(70) GT11-1822PCF(70) GT11-2428SCF(70) GT11-2428PCF(70) Applicator Product Number (2-conductor type) Applicator 105-GT11-1822S-2 Applicator 105-GT11-1822P-2 Applicator 105-GT11-2428S-2 Applicator 105-GT11-2428P-2 Outer terminal Caulking Jig (for 8-conductor cable) Please contact a sales representative for information about the outer terminal crimping tool. 240spm (60Hz) AC100V Applicator Product Number (8-conductor type) Applicator 105-GT11-1822S Applicator 105-GT11-1822P Applicator 105-GT11-2428S Applicator 105-GT11-2428P