VTVS3V3ASMF to VTVS63GSMF www.vishay.com Vishay Semiconductors 400 W TransZorb(R) Transient Voltage Suppressor (TVS) Diode in SMF-Package FEATURES * 400 W peak pulse power capability with a 10/1000 s waveform * Tolerance of the avalanche breakdown voltage 5 % VTVSxxxA... 2 % VTVSxxxG... 2 1 Available 20278 * Low-profile package 17249 * Wave and reflow solderable PRIMARY CHARACTERISTICS * ESD-protection acc. IEC 61000-4-2 30 kV contact discharge 30 kV air discharge VBR 6.4 V to 78.2 V VWM 3.3 V to 63 V PPPM 400 W * Excellent clamping capability TJ max. 175 C * "Low-Noise" technology - very fast response time Polarity Uni-directional Package SMF (DO-219AB) * AEC-Q101 qualified available * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MARKING (example only) XX YYY 22623 Bar = cathode marking YYY = type code (see table below) XX = date code DESIGN SUPPORT TOOLS click logo to get started Models Available ORDERING INFORMATION ENVIRONMENTAL AND QUALITY CODE PART NUMBER (EXAMPLE) TOLERANCE VBR AEC-Q101 QUALIFIED RoHS-COMPLIANT + LEAD (Pb)-FREE TERMINATIONS HALOGEN-FREE VTVS5V0ASMF- 5% VTVS5V0ASMF- 5% VTVS5V0ASMF- 5% VTVS5V0ASMF- 5% VTVS5V0GSMF- 2% VTVS5V0GSMF- 2% VTVS5V0GSMF- 2% VTVS5V0GSMF- 2% H H H H PACKAGING CODE 3K PER 7" REEL TIN (8 mm TAPE), PLATED 30K/BOX = MOQ M 3 -08 M 3 -08 M 3 10K PER 13" REEL (8 mm TAPE), 50K/BOX = MOQ VTVS5V0ASMF-M3-08 VTVS5V0ASMF-HM3-08 -18 M 3 M 3 -08 -08 ORDERING CODE (EXAMPLE) -18 VTVS5V0ASMF-M3-18 VTVS5V0ASMF-HM3-18 VTVS5V0GSMF-M3-08 M 3 M 3 -18 VTVS5V0GSMF-HM3-08 VTVS5V0GSMF-M3-18 M 3 -18 VTVS5V0GSMF-HM3-18 PACKAGE DATA PACKAGE NAME MOLDING WEIGHT COMPOUND (mg) SMF (DO-219AB) Halogen-free Rev. 1.5, 07-Feb-18 15 MOLDING HEIGHT LENGTH WIDTH COMPOUND MAX. MAX. MAX. FLAMMABILITY (mm) (mm) (mm) RATING 1.08 3.9 1.9 UL 94 V-0 MOISTURE SENSITIVITY LEVEL WHISKER TEST ACC. JESD 201 SOLDERING CONDITIONS MSL level 1 (acc. J-STD-020) class 2 Peak temperature max. 260 C Document Number: 85891 1 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTVS3V3ASMF to VTVS63GSMF www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT A W Peak pulse current tp = 10/1000 s waveform IPPM see "Electrical Characteristics" Peak pulse power tp = 10/1000 s waveform PPP 400 Contact discharge acc. IEC 61000-4-2; 10 pulses ESD immunity VESD Air discharge acc. IEC 61000-4-2; 10 pulses Thermal resistance 30 kV 30 kV Mounted on infinite heat sink RthJL 20 K/W IF = 50 A, tp = 1 ms VF 1.8 V Junction temperature TJ -55 to +175 C TSTG -55 to +175 C Forward clamping voltage Operating temperature Storage temperature ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TYPE CODE PART NUMBER HALOGENFREE REVERSE BREAKDOWN VOLTAGE at TJ = 25 C, IT = 1 mA VBR (V) VBR (V) MIN. MAX. STAND-OFF VOLTAGE MAXIMUM REVERSE CURRENT at VRWM MAXIMUM PEAK PULSE CURRENT tp = 10/1000 s MAXIMUM REVERSE CLAMPING VOLTAGE at IPPM TYPICAL CAP. at VR = 0 V, f = 1 MHz PROTECTION PATHS VRWM (V) IR (A) IPPM (A) VC (V) CD (pF) Nchannel 1 VTVS3V3ASMF 9Z5 6.4 7.0 3.3 0.05 42.95 8.9 2095 VTVS5V0ASMF 905 6.4 7.0 5.00 5 42.95 8.9 2095 1 VTVS8V5ASMF 915 9.5 10.5 8.50 0.1 28.24 13.5 1270 1 VTVS9V4ASMF 925 10.5 11.6 9.40 0.1 25.48 14.9 1130 1 VTVS10ASMF 935 11.4 12.7 10.30 0.05 23.20 16.3 988 1 VTVS11ASMF 945 12.6 13.9 11.20 0.05 21.13 18.0 910 1 VTVS12ASMF 955 14.0 15.4 12.40 0.05 19.01 20.1 807 1 VTVS14ASMF 965 15.4 17.0 13.80 0.05 17.16 22.2 752 1 VTVS15ASMF 975 17.1 18.8 15.10 0.05 15.47 25 684 1 VTVS17ASMF 985 19.0 21.0 16.90 0.05 13.79 28 606 1 VTVS19ASMF 995 20.9 23.2 18.70 0.05 12.44 31 558 1 VTVS21ASMF 9A5 23.0 25.4 20.50 0.05 11.33 34 513 1 VTVS23ASMF 9B5 25.7 28.4 22.60 0.05 10.09 38 480 1 VTVS25ASMF 9C5 28.5 31.5 25.20 0.05 9.07 42 433 1 VTVS28ASMF 9D5 31.4 34.7 27.90 0.05 8.21 47 412 1 VTVS31ASMF 9E5 34.2 37.8 30.60 0.05 7.51 51 380 1 VTVS33ASMF 9F5 37.1 41.0 33.30 0.05 6.91 55 379 1 VTVS36ASMF 9G5 40.9 45.2 36.00 0.05 6.24 61 342 1 VTVS40ASMF 9H5 44.7 49.4 39.60 0.05 5.70 67 309 1 VTVS43ASMF 9J5 48.5 53.6 43.20 0.05 5.23 73 292 1 VTVS47ASMF 9K5 53.2 58.8 46.80 0.05 4.76 80 293 1 VTVS52ASMF 9L5 58.9 65.1 52.20 0.05 4.28 89 242 1 VTVS58ASMF 9M5 64.6 71.4 57.60 0.05 3.89 98 245 1 VTVS63ASMF 9N5 70.8 78.2 63.00 0.05 3.54 108 227 1 Rev. 1.5, 07-Feb-18 Document Number: 85891 2 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTVS3V3ASMF to VTVS63GSMF www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TYPE CODE PART NUMBER HALOGENFREE REVERSE BREAKDOWN VOLTAGE at TJ = 25 C, IT = 1 mA VBR (V) VBR (V) MIN. MAX. STAND-OFF VOLTAGE MAXIMUM REVERSE CURRENT at VRWM MAXIMUM PEAK PULSE CURRENT tp = 10/1000 s MAXIMUM REVERSE CLAMPING VOLTAGE at IPPM TYPICAL CAP. at VR = 0 V, f = 1 MHz PROTECTION PATHS VRWM (V) IR (A) IPPM (A) VC (V) CD (pF) Nchannel 1 VTVS3V3GSMF 9Z2 6.57 6.84 3.3 0.05 43.99 8.9 2095 VTVS5V0GSMF 902 6.57 6.84 5.00 5 43.99 8.9 2095 1 VTVS8V5GSMF 912 9.80 10.20 8.50 0.1 29.10 13.5 1270 1 VTVS9V4GSMF 922 10.83 11.28 9.40 0.1 26.23 14.9 1130 1 VTVS10GSMF 932 11.81 12.30 10.30 0.05 23.98 16.3 988 1 VTVS11GSMF 942 12.99 13.52 11.20 0.05 21.75 18.0 910 1 VTVS12GSMF 952 14.41 15.00 12.40 0.05 19.53 20.1 807 1 VTVS14GSMF 962 15.88 16.53 13.80 0.05 17.67 22.2 752 1 VTVS15GSMF 972 17.60 18.31 15.10 0.05 15.89 25 684 1 VTVS17GSMF 982 19.60 20.40 16.90 0.05 14.21 28 606 1 VTVS19GSMF 992 21.61 22.50 18.70 0.05 12.84 31 558 1 VTVS21GSMF 9A2 23.72 24.69 20.50 0.05 11.67 34 513 1 VTVS23GSMF 9B2 26.51 27.60 22.60 0.05 10.40 38 480 1 VTVS25GSMF 9C2 29.40 30.60 25.20 0.05 9.35 42 433 1 VTVS28GSMF 9D2 32.39 33.72 27.90 0.05 8.45 47 412 1 VTVS31GSMF 9E2 35.28 36.72 30.60 0.05 7.74 51 380 1 VTVS33GSMF 9F2 38.27 39.84 33.30 0.05 7.11 55 379 1 VTVS36GSMF 9G2 42.19 43.92 36.00 0.05 6.43 61 342 1 VTVS40GSMF 9H2 46.11 48.00 39.60 0.05 5.87 67 309 1 VTVS43GSMF 9J2 50.03 52.08 43.20 0.05 5.39 73 292 1 VTVS47GSMF 9K2 54.88 57.12 46.80 0.05 4.90 80 293 1 VTVS52GSMF 9L2 60.76 63.24 52.20 0.05 4.41 89 242 1 VTVS58GSMF 9M2 66.64 69.36 57.60 0.05 4.01 98 245 1 VTVS63GSMF 9N2 73.01 75.99 63.00 0.05 3.65 108 227 1 Rev. 1.5, 07-Feb-18 Document Number: 85891 3 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTVS3V3ASMF to VTVS63GSMF www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) Axis Title 110 500 400 300 10000 Rise time 10 s to 100 % 100 90 200 80 1st line 2nd line 60 1000 s to 50 % 50 30 50 40 30 20 20 40 100 ..25.. ..28.. ..31.. ..33.. ..36.. ..40.. ..43.. ..47.. ..52.. ..58.. ..63.. 100 10 0 0 1000 10 0.01 % 10 3000 2000 t (s) 2nd line 22881 0.1 % Axis Title 10000 120 100 10 1000 100 2nd line VC (V) ZthJL: Junction to lead (infinite heat sink - leads clamped between big copper blocks) VTVS63ASMF ..58.. ..52.. ..47.. ..43.. ..40.. ..36.. ..33.. .31.. 80 1st line 2nd1st lineline 2nd line 2nd line Zth - Thermal Impedance (K/W) 100 % Axis Title 10000 ZthJA: Junction to ambient (Diode soldered on PCB with minimal foot print) 1 10 % Fig. 4 - Typical Capacitance CD vs. Reverse Voltage VR Fig. 1 - 10/1000 s Peak Pulse Current Wave Form 100 1% VR (V) in % of the Max. Working Voltage VRWM 2nd line 22863_2 60 40 1000 1st line 2nd line 2nd line IRSM (%) 70 2nd line CD (pF) 1000 .28.. .25.. 100 20 0.1 0.0001 0.001 10 0.01 0.1 1 10 tp - Pulse Width (s) 2nd line 22861 0 100 10 0 2 4 6 10 12 14 IPP (A) 2nd line 22862_01 Fig. 2 - Thermal Impedance vs. Time 8 Fig. 5 - Typical Peak Clamping Voltage vs. Peak Pulse Current Axis Title 3000 10000 45 ..5V0.. ..3V3.. 40 ..8V5.. ..23.. ..21.. ..19.. ..17.. ..15.. ..14.. ..12.. ..11.. ..10....9V4.. ..8V5.. 30 500 400 300 200 100 0.01 % 2nd line VC (V) 2nd line CD (pF) 1000 22863_1 VTVS25ASMF 35 ..9V4.. ..10.. ..11.. ..12.. ..14.. ..15.. ..17.. ..19.. ..21.. ..23.. 0.1 % 20 15 10 1000 100 ..5V0.. ..3V3.. 5 0 1% 10 % 100 % VR (V) in % of the Max. Working Voltage VRWM 2nd line 2nd line Fig. 3 - Typical Capacitance CD vs. Reverse Voltage VR Rev. 1.5, 07-Feb-18 25 1st line 2nd line 2000 10 0 22862_02 10 20 30 40 50 60 IPP (A) 2nd line Fig. 6 - Typical Peak Clamping Voltage vs. Peak Pulse Current Document Number: 85891 4 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTVS3V3ASMF to VTVS63GSMF www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): SMF 0.85 [0.033] 0.35 [0.014] 5 1.2 [0.047] 0.8 [0.031] 5 1.7 [0.067] 1.9 [0.075] 0.1 [0.004] 0 [0.000] Detail Z enlarged 0.05 [0.002] 0.25 [0.010] 1.8 [0.071] min. 1.08 [0.043] 0.88 [0.035] 2.9 [0.114] 2.7 [0.106] 3.9 [0.154] 3.5 [0.138] foot print recommendation: Reflow soldering 1.3 [0.051] 1.4 [0.055] 1.3 [0.051] 2.9 [0.114] Created - Date: 15. February 2005 Rev. 5 - Date: 09. Oct. 2017 Document no.: S8-V-3915.01-001 (4) 22989 Rev. 1.5, 07-Feb-18 Document Number: 85891 5 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTVS3V3ASMF to VTVS63GSMF www.vishay.com Vishay Semiconductors BLISTER TAPE DIMENSIONS in millimeters (inches) PS Document-No.: S8-V-3717.02-001 (3) 18513 Rev. 1.5, 07-Feb-18 Document Number: 85891 6 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VTVS3V3ASMF to VTVS63GSMF www.vishay.com Vishay Semiconductors ORIENTATION IN CARRIER TAPE - SMF Unreeling direction SMF cathode Top view Document no.: S8-V-3717.02-003 (4) Created - Date: 09. Feb. 2010 22670 Rev. 1.5, 07-Feb-18 Document Number: 85891 7 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000