3M is a trademark of 3M Company. All other trademarks are property of their respective owners. Please recycle. Printed in USA.
© 3M 2017. All rights reserved. 75-0501-3980-9
RoHS Directive compliant: RoHS 2011/65/EU means that the product or part does not contain any of the substances in excess of the maximum concentration
values (“MCVs”) in EU RoHS Directive 2011/65/EU, unless the substance is in an application that is exempt under EU RoHS. The MCVs are by weight in
homogeneous materials. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third
party suppliers to 3M. (3/13)
IMPORTANT NOTICE TO PURCHASER: Specications are subject to change without notice. These 3M Touch Systems’ Products and software are warranted
to meet their published specications from the date of shipment and one year from the time of purchase. 3M Touch Systems makes no additional warranties,
express or implied, including but not limited to any implied warranties of merchantability or tness for a particular purpose. User is responsible for determining
whether the 3M Touch Systems Products and software are t for User’s particular purpose and suitable for its method of production, including intellectual
property liability for User’s application. If the Product, software or software media is proven not to have met 3M Touch Systems’ warranty, then 3M Touch
Systems’ sole obligation and User’s and Purchaser’s exclusive remedy will be, at 3M Touch Systems’ option, to repair or replace that Product quantity or
software media or to refund its purchase price. 3M Touch Systems has no obligation under 3M Touch Systems’ warranty for any Product, software or software
media that has been modied or damaged through misuse, accident, neglect, or subsequent manufacturing operations or assemblies by anyone other than
3M Touch Systems. 3M Touch Systems shall not be liable in any action against it in any way related to the Products or software for any loss or damages,
whether non-specied direct, indirect, special, incidental or consequential (including downtime, loss of prots or goodwill) regardless of the legal theory
asserted. (7/02)
3M Touch Systems
Subsidiary of 3M Company
501 Grin Brook Park Drive
Methuen, MA 01844 U.S.A.
Phone 1-888-659-1080
Web www.3M.com/touch
Feature Benet
Advanced PCAP
Capability
• Resolves up to 80 Simultaneous Touch points while supporting palm rejection
• Capable of recognizing capacitive objects placed on screen
• Compatible with leading active pens and passive styli supporting multiple pens and ngers simultaneously
Proprietary
Ultrane Metal
Mesh Design
• Mesh blackening process minimizes sparkle and glint
• Precision manufacturing process virtually eliminates moiré
• Scalable from 15–65 inches without reduced performance
• Ability to project through cover glass up to 5mm thick
Proprietary
3M Electronics
• High signal-to-noise ratio provides input exibility including thin gloves and ngertips
• Custom ASIC chip design oers a standard protocol for sizes ranging between 15 and 65 inches and facilitates seamless
application development
3M PCT with
Heat Tempered
Cover Glass*
• No surface components or bezel requirements limit debris build up resulting in increased reliability
• All glass front surface provides a sleek, modern aesthetic
• Anti-stiction surface allows for smooth nger glide across the surface
• Anti-glare for table-top applications or strong ambient light environments
Mechanical
Total Thickness 4.4mm
Graphics Black border (standard design)
Display Size Supports 32" to 65" (standard sizes available)
Durability Non-active cover glass, no wear mechanism
Sealing NEMA 4X/IP66, complete water-resistant and
seal compatible
Regulatory FCC-B, CE, IEC 60950 (Agency Approvals)
RoHS Compliant Yes
Ordering Information
Diagonal Sensor Part No. Controller Part No.
32"98-1100-0671-9 98-1100-0579-4
39"98-1100-0830-1 98-1100-0714-7
40" 98-1100-0799-8 98-1100-0714-7
42"98-1100-0665-1 98-1100-0714-7
43" 98-1100-0753-5 98-1100-0714-7
46"98-1100-0664-4 98-1100-0713-9
48"98-1100-0800-4 98-1100-0659-4
49" 98-1100-0743-6 98-1100-0659-4
55" 98-1100-0747-7 98-1100-0659-4
65" 98-1100-0757-6 98-1100-0659-4
Operating Systems Supported
Native Driver
Support
Windows XP, Vista, 7, 8, 10; Linux Kernels 3.5 or
later for Windows 7 compatible FW; Linux Kernels
3.12 or later for Windows 8 compatible FW
3M Driver Support MT 7 (Windows XP, Vista, 7, 8, 10, XPe, WEPOS,
CE, Linux kernels 2.6 and 3.0)
3rd-party Driver Mac OS (Intel)
System Warranty
Three years
System Performance
Touch Inputs 80 touches with palm rejection
Input Method Finger, thin gloves, active pens and passive styli
Accuracy >99% of true position
Resolution 32K x 32K
Linearizion Inherently Linear (only video alignment needed)
Tail Connection Solderless design
Light Transmission >89.5% | 65": >86.5%
Electronics (3M Multi-Touch Controller PX5000)
Communication USB HID Digitizer
Operating Current <206mA max
Power Connection USB Vbus
Connectors ZIF (touchscreen), Molex (USB COM)
Touch Refresh Rate1Greater than 100 Hz (<10ms)
Reliability
Surface
Obstruction Withstands most surface contaminants
Chemical
Resistance ASTM-D-1308-2 and ASTM-F-1598-95
Operating
Temperature
-10°C to +70°C (up to 90% RH from 0°C to +35°C
(above +35°C, see specication))
Storage
Temperature
-40°C to +70°C (up to 90% RH from 0°C to +35°C
(above +35°C, see specication))
3M™ Multi-Touch Pro-Series PCAP Systems Specications for Large Format
* Except in 32-inch models
1 Time between touch position updates