MBA/SMA 0204 HF Vishay Beyschlag High Frequency (> 3 GHz) Leaded Resistors FEATURES * Speciality product for RF applications MBA/SMA 0204 HF leaded thin film resistors for RF applications are the perfect choice in high frequency circuit designs; where the impedance change due to the parasitic inductance of regular and professional resistors can not be accepted. Typical applications are in the fields of telecommunication equipment and industrial electronics. APPLICATIONS * * * * * Low-inductance non-helical trimmed product Suitable for more than 3 GHz Resistance range: 1.5 to 470 Lead (Pb)-free solder contacts Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes * Compatible with "Restriction of the use of Hazardous Substances" (RoHS) directive 2002/95/EC (issue 2004) METRIC SIZE * Telecommunication equipment DIN: * Industrial electronics 0204 CECC: A TECHNICAL SPECIFICATIONS DESCRIPTION MBA/SMA 0204 HF CECC Size A 1.5 to 470 Resistance Range Resistance Tolerance 1 %; 2 % Temperature Coefficient 50 ppm/K Operation Mode long term standard Climatic Category (LCT/UCT/Days) 55/125/56 55/155/56 0.25 W 0.4 W Rated Dissipation, P70 limited by P70 Operating Voltage, Umax. AC/DC 125 C Film Temperature Max. Resistance Change at P70 for Resistance Range, R/R max., After: 155 C 1.5 to 470 1000 h 0.25 % 0.5 % 8000 h 0.5 % 1.0 % 225 000 h 1.5 % - 225 000 h 8000 h Specified Lifetime Permissible Voltage Against Ambient: Failure Rate www.vishay.com 158 1 Min; Uins 300 V Continuous 75 V 0.7 x 10- 9/h For technical questions, contact: filmresistors.leaded@vishay.com Document Number: 28769 Revision: 10-Mar-08 MBA/SMA 0204 HF High Frequency (> 3 GHz) Leaded Resistors Vishay Beyschlag PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: MBA0204AC5109GCT00 M B A 0 2 0 SPECIAL CHARACTER MODEL/SIZE MBA0204 = MBA/SMA 0204 4 A C 5 1 0 9 G C T 0 0 TCR/MATERIAL VALUE TOLERANCE PACKAGING (1) SPECIAL C = 50 ppm 3 digit value 1 digit multiplier MULTIPLIER 8 = *10- 2 9 = *10- 1 0 = *100 F = 1.0 % G = 2.0 % CT C1 RP 00 = Standard A = HF High Frequency PRODUCT DESCRIPTION: MBA/SMA 0204-50 2 % HF CT 51R0 MBA/SMA 0204 - 50 2% HF CT 51R0 MODEL/SIZE TCR TOLERANCE SUFFIX PACKAGING (1) MBA/SMA 0204 50 ppm 1.0 % 2.0 % HF CT C1 RP RESISTANCE VALUE 51R0 = 51 Notes: (1) Please refer to table PACKAGING for complete information * The PART NUMBER shown above is to facilitate the unified part numbering system for ordering products PACKAGING REEL MODEL PIECES MBA/SMA 0204 5000 BOX CODE PIECES CODE RP 1000 5000 C1 CT DIMENSIONS D L M I I d DIMENSIONS - leaded resistor types, mass and relevant physical dimensions TYPE MBA/SMA 0204 HF Dmax. (mm) Lmax. (mm) dnom. (mm) Imin. (mm) Mmin. (mm) MASS (mg) 1.6 3.6 0.5 29.0 5.0 125 TEMPERATURE COEFFICIENT AND RESISTANCE RANGE RESISTANCE VALUE (2) DESCRIPTION TCR TOLERANCE MBA/SMA 0204 HF 50 ppm/K 1 %; 2 % 1.5 to 470 ; 50 Note: (2) Resistance values to be selected for 1 % from the E24/E96 series and for 2 % from E24 series Document Number: 28769 Revision: 10-Mar-08 For technical questions, contact: filmresistors.leaded@vishay.com www.vishay.com 159 MBA/SMA 0204 HF Vishay Beyschlag High Frequency (> 3 GHz) Leaded Resistors DESCRIPTION ASSEMBLY Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade ceramic body (85 % Al2O3) and conditioned to achieve the desired temperature coefficient. Nickel plated steel termination caps are firmly pressed on the metallised rods. A special laser is used to achieve the target value by smoothly cutting a low-inductivity non-helical groove in the resistive layer without damaging the ceramics. Connecting wires of electrolytic copper plated with 100 % pure tin are welded to the termination caps. The resistors are covered by protective coating designed for electrical, mechanical and climatic protection.The terminations receive a final pure tin on nickel plating. Four colour code rings designate the resistance value and tolerance in accordance with IEC 60062. Additional black dots near the 3rd colour ring identify the special HF product. The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines. Excellent solderability is proven, even after extended storage. They are suitable for automatic soldering using wave or dipping. The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. The resistors are completely lead (Pb)-free, the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. The immunity of the plating against tin whisker growth has been proven under extensive testing. All products comply with the CEFIC-EECA-EICTA list of legal restrictions on hazardous substances. This includes full compatibility with the following directives: The result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. Only accepted products are stuck directly on the adhesive tapes in accordance with IEC 60286-1. * 2000/53/EC End of Vehicle Life Directive (ELV) * 2000/53/EC Annex II to End of Vehicle Life Directive (ELV II) * 2002/95/EC Restriction of the Substances Directive (RoHS) use of Hazardous * 2002/96/EC Waste Electrical and Electrical Equipment Directive (WEEE) APPROVALS Where applicable, the resistors are tested in accordance with CECC 40101-806 which refers to EN 60115-1 and EN 140100. Vishay BEYSCHLAG has achieved "Approval Manufacturer" in accordance with EN 100114-1. of Power Dissipation P FUNCTIONAL PERFORMANCE 1 MBA/SMA 0204 HF W 0. 5 0 - 50 0 Derating - Standard Operation www.vishay.com 160 5 0 70 100 C 150 Ambient Temperature amb For technical questions, contact: filmresistors.leaded@vishay.com Document Number: 28769 Revision: 10-Mar-08 MBA/SMA 0204 HF Power Dissipation P High Frequency (> 3 GHz) Leaded Resistors 1 Vishay Beyschlag MBA/SMA 0204 HF W 0. 5 0 - 50 0 5 0 70 150 C Ambient Temperature amb Rise of the Surface Temperature Temperature Rise Tr 100 MBA/SMA 0204 HF 80 K 60 40 20 0 0 0.1 0.2 0.4 0.3 0.5 0.6 0.7 W IZI/R Temperature Rise 0.8 Load P 2.0 27 6.8 ., 1.5 50 1.0 100 220 470 0.5 0.1 0.3 RF - Behaviour Document Number: 28769 Revision: 10-Mar-08 1 10 GHz |Z|/R for MBA/SMA 0204 HF Frequency f For technical questions, contact: filmresistors.leaded@vishay.com 20 www.vishay.com 161 MBA/SMA 0204 HF Vishay Beyschlag High Frequency (> 3 GHz) Leaded Resistors TESTS AND REQUIREMENTS Essentially all tests are carried out in accordance with the following specifications: EN 140 000/IEC 60115-1, Generic specification (includes tests) EN 140100/IEC 60115-2, Sectional specification (includes schedule for qualification approval) CECC 40101-806, Detail specification (includes schedule for conformance inspection) The following table contains the applicable tests selected from the documents listed above. The tests are carried out in accordance with IEC 60068 and under standard atmospheric conditions in accordance with IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated temperature range: Lower Category Temperature, Upper Category Temperature; damp heat, long term, 56 days) is valid. Unless otherwise specified the following values apply: Temperature: 15 C to 35 C Relative humidity: 45 % to 75 % Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). For testing the components are mounted on a test board in accordance with IEC 60115-1, 4.31 unless otherwise specified. In the Test Procedures and Requirements table only the tests and requirements are listed with reference to the relevant clauses of IEC 60115-1 and IEC 60068-2; a short description of the test procedure is also given. TEST PROCEDURES AND REQUIREMENTS IEC 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R max.) stability for product types: 1.5 to 470 MBA/SMA 0204 HF 4.5 4.8.4.2 4.25.1 - - 4.25.3 - 4.24 78 (Cab) www.vishay.com 162 resistance 1 %; 2 % temperature at 20/LCT/20 C and coefficient 20/UCT/20 C endurance at 70 C: standard operation mode U = P 70 x R or U = Umax.; 1.5 h ON; 0,5 h OFF endurance at 70 C: long term operation mode 50 ppm/K 70 C; 1000 h (0.5 % R + 0.05 ) 70 C; 8000 h (1 % R + 0.1 ) U = P 70 x R or U = Umax.; 1.5 h ON; 0.5 h OFF 70 C; 1000 h (0.25 % R + 0.05 ) 70 C; 8000 h (0.5 % R + 0.05 ) endurance at upper category temperature damp heat, steady state 125 C; 1000 h (0.25 % R + 0.05 ) 155 C; 1000 h (0.5 % R + 0.05 ) (40 2) C; 56 days; (93 3) % RH (0.5 % R + 0.05 ) For technical questions, contact: filmresistors.leaded@vishay.com Document Number: 28769 Revision: 10-Mar-08 MBA/SMA 0204 HF High Frequency (> 3 GHz) Leaded Resistors Vishay Beyschlag TEST PROCEDURES AND REQUIREMENTS IEC 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST REQUIREMENTS PERMISSIBLE CHANGE (R max.) PROCEDURE stability for product types: 1.5 to 470 MBA/SMA 0204 HF 4.23 climatic sequence: 4.23.2 2 (Ba) dry heat 155 C; 16 h 4.23.3 30 (Db) damp heat, cyclic 55 C; 24 h; 90 to 100 % RH; 1 cycle 4.23.4 1 (Aa) cold - 55 C; 2 h 4.23.5 13 (M) low air pressure 8.5 kPa; 2 h; 15 C to 35 C 30 (Db) damp heat, cyclic 55 C; 5 days; 95 % to 100 % RH; 5 cycles (0.5 % R + 0.05 ) no visible damage 1 (Aa) cold - 55 C; 2 h (0.1 % R + 0.01 ) - short time overload room temperature; U = 2.5 x P 70 x R or U = 2 x Umax.; 5 s (0.1 % R + 0.01 ) no visible damage 14 (Na) rapid change of temperature 30 minutes at LCT and 30 minutes at UCT; 5 cycles (0.1 % R + 0.01 ) no visible damage 45 (XA) component solvent resistance isopropyl alcohol + 23 C; toothbrush method marking legible; no visible damage 20 (Tb) resistance to soldering heat unmounted components; (260 5) C; (10 1) s (0.1 % R + 0.01 ) no visible damage 20 (Ta) solderability + 235 C; 2 s; solder bath method good tinning ( 95 % R covered); no visible damage 6 (B4) vibration 6 h; 10 to 2000 Hz 1.5 mm or 196 m/s2 (0.1 % R + 0.01 ) 21 (Ua1) 21 (Ub) 21 (Uc) robustness of terminations tensile, bending and torsion (0.1 % R + 0.01 ); no visible damage - voltage proof URMS = Uins; 60 s no flashover or breakdown 4.23.6 4.13 4.19 4.29 4.18.2 4.17 4.22 4.16 4.7 12NC INFORMATION Ordering Example (For historical coding reference of MBA 0204 HF) Last Digit of 12NC Indicating Resistance Decade RESISTANCE DECADE LAST DIGIT 1 to 9.99 8 10 to 99.9 9 100 to 999 1 The ordering code of a MBA 0204 HF resistor, value 51 and TCR 50 with 2 % tolerance, supplied on bandolier ammopack, in a box units is: 2312 908 05109. 12NC CODE FOR HISTORICAL CODING REFERENCE OF MBA 0204 HF ORDERING CODE 2312 ... ..... DESCRIPTION BANDOLIER IN BOX AMMOPACK TYPE TCR TOL. C1 1000 units CT 5000 units MBA 0204 HF 50 ppm/K 2% 903 0.... 908 0.... Document Number: 28769 Revision: 10-Mar-08 For technical questions, contact: filmresistors.leaded@vishay.com www.vishay.com 163 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1