Han(R) tools Contents Page Hand crimping tools for Han(R) standard contacts...................................... 90.4 Hand crimping tools for fibre optic contacts............................................. 90.9 Hand crimping tools for Han-Fast(R) Lock contacts.................................... 90.10 Hand crimping tools for wire end ferrules................................................. 90.11 Hand crimping tools for D-Sub contacts................................................... 90.12 Hand crimping tools for coaxial contacts.................................................. 90.13 Pneumatic crimping tool........................................................................... 90.15 Hydraulic crimping tools for Han(R) TC high current contacts..................... 90.16 Crimping machine TC-C01....................................................................... 90.18 Crimping machine TK-M........................................................................... 90.20 Crimping machine BK............................................................................... 90.22 Panel punch............................................................................................. 90.24 Assembly tools......................................................................................... 90.25 Removal tools........................................................................................... 90.29 Stripping tools........................................................................................... 90.32 Tools 90 * 1 Overview Han(R) crimping tools Han(R) C Power contacts 09 32 000 .... Han-Yellock(R) Power contacts 11 05 000 .... 6119 6221 6204 6205 6207 6208 6209 6101 6102 6103 6104 6105 6106 6107 6108 6201 6202 6203 6204 6205 6206 6207 6208 Female contact 3321 6121 6122 6123 6124 6125 6126 6127 6128 6221 6222 6223 6224 6225 6226 6227 6228 x x x x x x x x 1 mm POF 0.14 - 0.37 0.5 0.75 1.0 1.5 2.5 3.0 4.0 26 - 22 20 18 18 16 14 12 12 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1 mm POF x 1.5 2.5 4.0 6.0 10.0 16 14 12 10 8 x x x x x x 0.14 - 0.37 0.5 0.75 1.0 1.5 2.5 3.0 4.0 26 - 22 20 18 18 16 14 12 12 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Description Locator Han D(R) 09 99 000 0311 x Locator Han E(R) 09 99 000 0310 x Locator Han(R) C 09 99 000 0308 x 09 99 000 0341 90 * 2 Locator Han-Yellock(R) 09 99 000 0343 09 99 000 0342 removal tools x x x x x 20 99 000 1035 20 18 18 16 14 x x x x x 09 99 000 0377 0.5 0.75 1.0 1.5 2.5 x x x x x x x x 09 99 000 0001 22 x 09 99 000 0012 6217 6222 6215 6218 6216 6223 6104 6105 6107 6108 6109 0.37 x 09 99 000 0319 6117 6122 6115 6118 6116 6123 Male contact 3311 26 - 24 09 99 000 0021 6127 6121 6114 6105 6104 6102 6106 6107 6227 6220 6214 6205 6204 6202 6206 6207 0.14 - 0.25 female contact gold plated male contact gold plated 6127 6227 6124 6224 6127 6227 6124 6224 6123 6223 6125 6225 6122 6222 6121 6221 6126 6226 Female contact 3221 3222 Tools x x x x x x 09 99 000 0381 Han E(R) F.O. contacts 20 10 001 .... 6107 6207 6104 6204 6107 6207 6104 6204 6103 6203 6105 6205 6102 6202 6101 6201 6106 6206 Male contact 3211 3212 / 3213 Crimping tools 09 99 000 0305 Han E(R) Power contacts 09 33 000 .... AWG 09 99 000 0319 Han D(R) F.O. contacts 20 10 001 .... mm 09 99 000 0110 Han D(R) Signal contacts 09 15 000 .... female contact silver plated male contact silver plated Tools Part number 09 99 000 0888 Crimp contacts Series Overview Han(R) crimping tools Han(R) C Power contacts 09 32 000 .... 6217 6222 6215 6218 6216 6223 6119 6101 6102 6103 6104 6105 6106 6107 6108 6201 6202 6203 6204 6205 6206 6207 6208 6121 6122 6123 6124 6125 6126 6127 6128 x2) x x x x x x x x x x x x x x x x 26 - 24 0.37 22 0.5 0.75 1.0 1.5 2.5 20 18 18 16 14 x x x x 6221 0.14 - 0.37 0.5 0.75 1.0 1.5 2.5 3.0 4.0 26 - 22 20 18 18 16 14 12 12 x x x x x x x x 6221 6222 6223 6224 6225 6226 6227 6228 0.14 - 0.37 0.5 0.75 1.0 1.5 2.5 3.0 4.0 26 - 22 20 18 18 16 14 12 12 x2) x x x x x x x 09 98 000 9003 6117 6122 6115 6118 6116 6123 x 0.14 - 0.25 09 98 000 9002 6227 6220 6214 6205 6204 6202 6206 6207 09 98 000 9001 6127 6121 6114 6105 6104 6102 6106 6107 09 98 000 6907 1) 6227 6224 6227 6224 6223 6225 6222 6221 6226 09 98 000 6903 1) 6127 6124 6127 6124 6123 6125 6122 6121 6126 09 98 000 6902 1) 6207 6204 6207 6204 6203 6205 6202 6201 6206 Crimping machines 09 98 000 6901 1) female contact gold plated 6107 6104 6107 6104 6103 6105 6102 6101 6106 AWG 09 99 000 0307 male contact gold plated 09 99 000 0381 09 99 000 0305 09 99 000 0319 Han-Yellock(R) Power contacts 11 05 000 .... female contact silver plated Han Power contacts 09 33 000 .... 09 99 000 0319 E(R) mm male contact silver plated 09 99 000 0012 Han D(R) Signal contacts 09 15 000 .... Part number 09 99 000 0314 Crimp contacts Series removal tools Tools x x x x x x x x x x x x x x x3) x3) 6104 6204 1.5 16 x x x x 6105 6205 2.5 14 x x x x x 6107 6207 4.0 12 x x x 6108 6208 6.0 10 x x x 6109 6209 10.0 8 x 1) TK-M basic machine 09 98 000 6900 is required 2) depending on the wire 3) only with modification 09 98 503 6900 Tools x 90 * 3 Hand crimping tools for Han(R) standard contacts Tools Details Details The high end tool with best performance. for wire gauges from 0.14 und 0.25 mm please use the contacts 09 15 000 6107, 6207, 6127 or 6227. Identification 90 * 4 Part number Crimping tool, Han D(R): 0.14 ... 2.5 mm, Han E(R): 0.14 ... 4 mm, Han-Yellock(R): 0.14 ... 4 mm, Han(R) C: 1.5 ... 4 mm, Pack contents: incl. locator, Handling instruction 09 99 000 0888 Check gauge, for crimping tool 09 99 000 0888, for optional testing 09 99 000 0889 Locator, Spare part, for crimping tool 09 99 000 0888 09 99 000 0887 Hand crimping tools for Han(R) standard contacts Tools Details for wire gauges from 0.14 und 0.25 mm please use the contacts 09 15 000 6107, 6207, 6127 or 6227. Identification Conductor cross-section (mm) Part number Crimping tool, Han D(R): 0.14 ... 2.5 mm, Han E(R): 0.14 ... 4 mm, Han-Yellock(R): 0.14 ... 4 mm, Han(R) C: 1.5 ... 4 mm Please order locator separately. 0,14 ... 4 09 99 000 0001 Locator, Han D(R) 0,14 ... 2,5 09 99 000 0311 Locator, Han E(R) 0,14 ... 4 09 99 000 0310 Locator, Han(R) C 1,5 ... 4 09 99 000 0308 Locator, Han E(R), Relay contacts 0,14 ... 4 09 99 000 0345 Adjustment gauge, Adjustment gauge set for Buchanon tool, Han D(R), Han E(R), Han(R) C, Han-Yellock(R) 0,14 ... 4 09 99 000 0379 90 * 5 Hand crimping tools for Han(R) standard contacts Tools Details Robust allrounder with very good performance. Identification Crimping tool, Han D(R): 0.14 ... 1.5 mm, Han E(R): 0.5 ... 4 mm, Han-Yellock(R): 0.5 ... 4 mm, Han(R) C: 1.5 ... 4 mm, Pack contents: incl. locator, Han D(R), Han E(R), Han(R) C, Please order Han-Yellock(R) separately. 90 * 6 Conductor cross-section (mm) 0,14 ... 4 Part number 09 99 000 0110 Locator, Han-Yellock(R) 09 99 000 0341 Locator, Spare part, Han D(R), Han E(R), Han(R) C 09 99 000 0376 Hand crimping tools for Han(R) standard contacts Tools Details The service tool for on-site maintenance. Identification Service crimping tool, Han D(R): 0.14 ... 1.5 mm, Han E(R): 0.5 ... 2.5 mm, Han-Yellock(R): 0.5 ... 2.5 mm, Pack contents: incl. locator, Please order Han-Yellock(R) separately. Conductor cross-section (mm) 0,14 ... 2,5 Part number 09 99 000 0021 Locator, Han-Yellock(R) 09 99 000 0343 Locator, Spare part, Han D(R), Han E(R) 09 99 000 0022 90 * 7 Hand crimping tools for Han(R) standard contacts Tools Details The professional tool for big cross-sections. Identification Crimping tool, Han(R) C: 4 ... 10 mm, Pack contents: incl. locator Locator, Spare part, Han(R) C: 4 ... 10 mm 90 * 8 Conductor cross-section (mm) 4 ... 10 Part number 09 99 000 0377 09 99 000 0963 Hand crimping tools for fibre optic contacts Tools Identification Part number Crimping tool, for FO connector (glass fibre), SC, F-SMA F-ST, A/F 3.8 mm, A/F 4.3 mm, A/F 4.95 mm for crimping of the strain relief 20 99 000 1031 Crimping tool, for FO connector (plastic fibre), SC, F-SMA F-ST, A/F 3 mm, A/F 4.95 mm, A/F 6.5 mm for crimping of the strain relief 20 99 000 1033 Crimping tool, for following 1 mm POF contacts, Han D(R), Han E(R), DIN 41626, Ferrule, F-SMA, -ST 20 99 000 1035 90 * 9 Hand crimping tools for Han-Fast(R) Lock contacts Tools Identification 90 * 10 Conductor cross-section (mm) Part number Crimping tool, Angled, for Han-Fast(R) Lock single contact 1,5 ... 2,5 4 ... 10 09 99 000 0876 09 99 000 0877 Crimping tool, for Han-Fast(R) Lock single contact, incl. locator 1,5 ... 2,5 4 ... 10 09 99 000 0881 09 99 000 0831 Hand crimping tools for wire end ferrules Tools Details The tool for the professional processing of wire end ferrules according to DIN 46228. Identification Crimping tool, for wire end ferrules, acc. to DIN 46228 Conductor cross-section (mm) 0,14 ... 2,5 4 ... 16 Part number 09 99 000 0970 09 99 000 0971 90 * 11 Hand crimping tools for D-Sub contacts Tools Identification 90 * 12 Conductor cross-section (mm) Part number Crimping tool, for 500 bandoliered standard contacts 0,09 ... 0,56 09 99 000 0169 Crimping tool, for single stamped D-Sub contact 0,09 ... 0,56 09 99 000 0175 Crimping tool, for turned male and female contact, 4 indent crimp in acc. to MIL 22 520/2-01 0,09 ... 0,82 09 99 000 0501 Locator, for single D-Sub standard contacts 09 99 000 0531 Locator, for single D-Sub standard contacts, 09 93 000 5576 + 09 93 000 5476 09 99 000 0897 Hand crimping tools for coaxial contacts Tools Identification Crimping tool, for turned male and female contact, 4 indent crimp in acc. to MIL 22 520/2-01 D-Sub , Locator, for inner contact die Conductor cross-section (mm) 0,09 ... 0,82 Part number 09 99 000 0501 09 99 000 0507 Contacts 09 69 182 x140 + 09 69 282 x140 09 69 182 x230 + 09 69 282 x230 90 * 13 Hand crimping tools for coaxial contacts Tools Identification Part number Crimping tool, for coaxial contact, acc. to DIN 41626, for outer ferrule Please order crimp dies separately. 09 99 000 0503 Crimp die, for D-Sub 09 99 000 0508 Contacts 09 69 182 x140 + 09 69 282 x140 09 69 182 x230 + 09 69 282 x230 09 69 181 x140 + 09 69 281 x140 09 69 181 x141 + 09 69 281 x141 09 69 181 x230 + 09 69 281 x230 Crimp die, for D-Sub mixed 09 99 000 0515 Contacts 09 69 181 x143 + 09 69 281 x143 Crimping tool, Crimp die included, for coaxial contact, acc. to DIN 41626 09 99 000 0194 Contacts 09 14 000 6211 + 09 14 000 6111 09 14 000 6221 + 09 14 000 6121 90 * 14 Pneumatic crimping tool Tools Identification Part number Pneumatic crimping tool, Han D(R): 0.14 ... 2.5 mm, Han E(R): 0.14 ... 4 mm, Han(R) C: 1.5 ... 4 mm, Pack contents: In plastic case, Locator Han(R) C, Locator Han E(R), Locator Han D(R), Adjustment gauge, Pneumatic tube, Operating instructions 09 99 000 0314 Pneumatic crimping tool, Han(R) C: 1.5 ... 10 mm, Pack contents: In plastic case, Locator Han(R) C, Pneumatic tube, Operating instructions 09 99 000 0307 Table fixing, for part number 09 99 000 0307 and 09 99 000 0314 09 99 000 0309 Foot switch, for part number 09 99 000 0307 and 09 99 000 0314 09 99 000 0347 90 * 15 Hydraulic crimping tools for Han(R) TC high current contacts Tools Specifications and approvals DIN 46235 Identification 90 * 16 Conductor cross-section (mm) Part number Battery hydraulic tool, Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mm 10 ... 70 09 99 000 0850 Hydraulic handtool, Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mm 10 ... 70 09 99 000 0851 Crimp die, for 60 kN tool, Pack contents: Supplied as a pair 10 16 25 35 50 70 09 99 000 0852 09 99 000 0853 09 99 000 0854 09 99 000 0855 09 99 000 0856 09 99 000 0857 Drawing (dimensions in mm) Hydraulic crimping tools for Han(R) TC high current contacts Tools Specifications and approvals DIN 46235 Identification Conductor cross-section (mm) Part number Battery hydraulic tool, Pressing force 120 kN, Crimp die acc. to DIN 46235 with pressing width 10 ... 14 mm 10 ... 240 09 99 000 0860 Hydraulic handtool, Pressing force 120 kN, Crimp die acc. to DIN 46235 with pressing width 10 ... 14 mm 10 ... 240 09 99 000 0861 Crimp die, for 120 kN tool, Pack contents: Supplied as a pair 10 16 25 35 50 70 95 120 150 185 240 09 99 000 0862 09 99 000 0863 09 99 000 0864 09 99 000 0865 09 99 000 0866 09 99 000 0867 09 99 000 0868 09 99 000 0869 09 99 000 0870 09 99 000 0871 09 99 000 0872 Drawing (dimensions in mm) 90 * 17 Crimping machine TC-C01 Tools 90 * 18 Features Details * Basic unit of compact construction for pre-stripped wires (stranded wire) * Easy handling due to well-arranged design * for individual, turned male and female contacts * Selective processing of male and female contacts * Automatic contact feed * Reproducible, top quality gas-tight crimp connections * Non-slip, anti-vibration adjustable feet for setting the height * Low noise level * With carrying handle * Removable electric and pneumatic supply connections * Maintenance interval counter * Minimal setup effort * Stepless adjustment of the crimping depth * Low follow-up costs for maintenance and repair * Easy replacement of wearing components Nominal voltage, max. 230 V Nominal frequency 50 Hz Power consumption ca.0.2 kW Pressure ca.6 bar Control system PLC Work cycle trigger Footswitch Work cycle 1 s Noise level ca.62 dB Crimp type Four-point crimping Contact feed Vibratory bowl feed Stroke counters Resettable daily counter and permanent counter Dimensions 345 x 230 x 400 mm Weight 24 kg Pack contents: 2.0 m connection cable and grounding plug, 2.0 m pneumatic hose, quick-release coupling and N6 plugin nipple, footswitch, carrying handle, operating instructions, declaration of conformity Crimping machine TC-C01 Tools Identification Conductor cross-section (mm) Part number Crimping machine TC-C01, for Han D(R) contact 0,14 ... 2,5 09 98 000 9001 Crimping machine TC-C01, for Han E(R) contact 0,14 ... 4 09 98 000 9002 Crimping machine TC-C01, for Han(R) C contact 1,5 ... 10 09 98 000 9003 Maintenance unit, Optional accessory Drawing (dimensions in mm) 09 98 336 6851 90 * 19 Crimping machine TK-M Tools Features Details * * * * * * * * * Drive electro-pneumatic Nominal voltage, max. 230 V Nominal frequency 50 Hz Power consumption ca.0.75 kW Pressure ca.6 bar Compressed air connection 3 dm / work cycle Control system PLC Work cycle trigger sensor Work cycle 1.5 s Noise level <70 dB Crimp type Four-point crimping Contact feed Vibratory bowl feed Stroke counters Resettable daily counte, total counter, operating hours, maintenance counter and quantity preselection Dimensions 580 x 470 x 470 mm Weight <60 kg Pack contents: one mounted interchangeable unit, 2.0 m connection cable and grounding plug, 2.0 m pneumatic hose with plug-in nipple N6, plug gauges for setting the crimping, centering bush for positioning the plug gauges, draw for insulation remains, drawer for holding the contacts when the magazine is emptied, tool set for setting, 1 set of stripping blades, operating instructions, declaration of conformity * * * * * 90 * 20 Basic unit of compact construction Fast stripping and crimping in one operating step Easy handling due to well-arranged design Touchscreen controlling for individual, turned male and female contacts Selective processing of male and female contacts Contact magazine with filling control Reproducible, top quality gas-tight crimp connections Infinitely variable adjustment parameters (stripping depth, stripping length, crimping depth, crimp contact feed rate) Rotatable vibration feeder and actuator in basic unit Low noise level for oil-free compressed air Minimal setup effort Low maintenance costs Crimping machine TK-M Tools Identification Conductor cross-section (mm) Crimping machine TK-M, Basic machine without interchangeable unit, Pack contents: Tool set for setting, 1 set of stripping blades, Operating instructions, Declaration of Conformity Part number 09 98 000 6900 Interchangeable unit, Han D(R) 0,14 ... 2,5 09 98 000 6901 Interchangeable unit, Han E(R) 0,14 ... 4 09 98 000 6902 Interchangeable unit, Han(R) C 1,5 ... 6 09 98 000 6903 Interchangeable unit, D-Sub 0,09 ... 0,82 09 98 000 6904 Interchangeable unit, Han-Yellock(R) 0,14 ... 2,5 09 98 000 6907 90 * 21 Crimping machine BK Tools Features Details * * * * * * * * * * Drive electro-pneumatic Nominal voltage, max. 230 V Nominal frequency 50 Hz Power consumption 0.75 kW Pressure 6 bar Control system PLC Stripping device type 514 Suction apparatus 2000.0900.20 Work cycle trigger sensor Work cycle 0.35 s Noise level 85 dB Illumination integrated tool light 20001326 Motor speed 440 -2000 rpm Stroke counters Resettable daily counter and permanent counter Dimensions 690 (with a contact reel: 1400) x 420 x 430 mm Weight <72 kg Pack contents: with role owner and guide plate, 2.0 m connection cable and grounding plug, 2.0 m pneumatic hose with plug-in nipple N9, oiler bottle for the lubricating of the crimping contacts, tool set for setting, 1 set of stamps for wire and isolation-crimp, 1 anvil one-piece for wire and isolation-crimp, 1 set of stripping blades, 1 litre of contact oil, operating instructions, declaration of conformity * * * * * 90 * 22 Fast stripping and crimping in one operating step Easy handling due to quick change tool and stripper Suitable for standard D-Sub crimp contacts Selective processing of male and female contacts Hand wheel for manual adjustments Maintenance-friendly through needle bearing rail Automatic exhaust of the isolation remainders Reproducible, top quality gas-tight crimp connections With crimp force monitor Setting parameters with raster rotary button (depth of insulation stripping, length of insulation stripping, crimping heigth on wire, crimping heigth on isulation, wire retainer position, band thrust and wire position in the crimp contact) Non slip and anti-vibration feet Low noise level for oil-free compressed air Low maintenance costs V-blades for special wires on request Crimping machine BK Tools Identification Conductor cross-section (mm) Crimping machine BK, Pack contents: With role owner and guide plate, Tool set for setting, 1 set of stripping blades, Operating instructions, Declaration of Conformity Quick change tool, D-Sub Part number 09 98 000 5000 0,09 ... 0,25 0,25 ... 0,5 09 98 000 3008 09 98 000 3009 90 * 23 Panel punch Tools Technical characteristics RoHS compliant Identification 90 * 24 Size Part number Battery hydraulic panel punch, To produce panel cut outs for connectors, Punching pressure: 60 kN, Pack contents: In plastic case, Lithium-Ion battery 18 V, 3 Ah, Charging set, Accessories 09 99 000 0900 Hydraulic hand panel punch, To produce panel cut outs for connectors, Punching pressure: 60 kN, Pack contents: In plastic case, Accessories 09 99 000 0901 Punch units for hydraulicpunch drivers, max. plate thickness (structural grade carbon steel): 2.0 mm 3 HPR Han-Eco(R) 10 A Han-Eco(R) 16 A Han-Yellock(R) 10 Han-Yellock(R) 30 Han-Yellock(R) 60 Modular Compact 09 99 000 0906 09 99 000 0914 09 99 000 0915 09 99 000 0910 11 99 300 0001 11 99 600 0001 09 99 000 0912 Han-Eco(R) B, Punch units for hydraulicpunch drivers, max. plate thickness (structural grade carbon steel): 2.0 mm 06 B 10 B 16 B 24 B 09 99 000 0916 09 99 000 0917 09 99 000 0918 09 99 000 0919 Han A(R) , Punch units for hydraulicpunch drivers, max. plate thickness (structural grade carbon steel): 2.0 mm 03 A 10 A 16 A 09 99 000 0907 09 99 000 0908 09 99 000 0909 Han(R) B , Punch units for hydraulicpunch drivers, max. plate thickness (structural grade carbon steel): 2.0 mm 06 B 10 B 16 B 24 B 09 99 000 0902 09 99 000 0903 09 99 000 0904 09 99 000 0905 Assembly tools Tools Identification Part number Torque set, for High Current axial screw contact, incl. reversing blade (A/F 4.0 + A/F 5.0), Tightening torque: 5 ... 14 Nm, Pack contents: High quality metal box, Variable tightening torque tool TorqueVario(R)-STplus, Setting tool: torque-setter, HARTING optimised interchangeable blades hexagonal A/F 4, HARTING optimised interchangeable blades hexagonal A/F 5 09 99 000 0833 Torque set, for power contact, incl. reversing blade (A/F 2.0 + A/F 2.5 + PH2), + different bits, + adapter blade, Tightening torque: 1 ... 5 Nm, Pack contents: High quality metal box, Variable tightening torque tool TorqueVario(R)-S, Setting tool: torque-setter, HARTING optimised interchangeable blades hexagonal A/F 2, HARTING optimised interchangeable blades hexagonal A/F 2.5, HARTING optimised interchangeable blades PH2, Torque bit universal holder, Bits: A/F3, A/F4 , PH0, PH1, PH2, T10, T15, T20, slot 0.6 x 4.5, slot 0.8 x 5.5 09 99 000 0834 Torque set, for HARTING screw contacts and fixing screws, Tightening torque: 0.5 ... 1.2 Nm, Pack contents: High quality metal box, Two pre-set tightening torque screwdrivers TorqueFix(R), Interchangeable blades PH1, PH2, slot 0.5 x 3.0 09 99 000 0835 90 * 25 Assembly tools Tools Identification 90 * 26 Part number Insertion tool for crimp contacts, Small cross-section, Variable length of blade, Han D(R), Han E(R), Han-Yellock(R) 09 99 000 0847 Replacement-tip, for part number 09 99 000 0847 09 99 000 0848 Assembly tool, for Han(R) ES insert 09 99 000 0367 Torque set, for guiding pins and bushes, Tightening torque: 0.5 Nm, incl. 1/4" Bit, Pack contents: Torque bit universal holder 1/4", 1 HARTING guiding pins and bushes bit, Product comes already pre-assembled in practical plastic packaging 09 99 000 0840 Bit 1/4" as a spare part for guiding pins and bushes 09 99 000 0841 Hexagonal driver for axial screw, With grip, A/F 4 (e. g. Han(R) 100 A Axial module) 09 99 000 0363 Hexagonal driver for axial screw, With grip, A/F 5 (e. g. Han(R) 200 A Axial module) 09 99 000 0364 Hexagonal driver for axial screw, Bit 1/4", 40 A contact (A/F 2) 09 99 000 0369 Hexagonal driver for axial screw, Adapter 3/8", A/F 4 (e. g. Han(R) 100 A Axial module) 09 99 000 0370 Assembly tools Identification Part number Hexagonal driver for axial screw, Adapter 3/8", A/F 5 (e. g. Han(R) 200 A Axial module) 09 99 000 0371 Hexagonal driver for axial screw, Adapter 3/8", A/F 8 (e. g. Han(R) HC Modular 650) 09 99 000 0372 Hexagonal driver for axial screw, Bit 1/4", 70 A contact (A/F 2.5) 09 99 000 0375 Han(R) VDE Screw Driver Set, The standard set, Pack contents: Slim bit screw driver 0.4 x 2.5, Slim bit screw driver 0.5 x 3.0, Slim bit screw driver 0.6 x 3.5, Slim bit screw driver 1.0 x 4.5, Phillips screw driver PH1 (191 x 30 mm), Phillips screw driver PH2 (218 x 23 mm) 09 99 000 0836 Screw driver set Slimline, Insolated blade for slim assembly, Pack contents: Slim bit screw driver 0.6 x 3.5, Slim bit screw driver 0.8 x 4.5, Phillips screw driver PH1 (191 x 30 mm), Phillips screw driver PH2 (218 x 36 mm) 09 99 000 0844 Tools 90 * 27 Assembly tools Tools Technical characteristics RoHS compliant Identification 90 * 28 Part number Polishing paper, for POF grain size 1000, Pack contents: Each part number means 5 pieces 20 80 001 9911 Polishing paper, for GI 9 -grain size, Pack contents: Each part number means 5 pieces 20 80 001 9912 Polishing paper, for GI 1 -grain size, Pack contents: Each part number means 5 pieces 20 80 001 9913 Polishing tool, DIN 41612 20 99 000 1092 Polishing tool, POF cable 2.2 mm diameter 20 99 000 1093 Polishing tool, SC 20 99 000 1097 Drawing (dimensions in mm) Removal tools Tools Identification Conductor cross-section (mm) Part number Removal tool, Han D(R) 09 99 000 0012 Replacement-tip, for part number 09 99 000 0012 09 99 000 0004 Removal tool, Han E(R) 09 99 000 0319 Removal tool, Han(R) C 1,5 ... 6 10 09 99 000 0305 09 99 000 0381 Removal tool, Han(R) C module, 09 14 003 3001 / 09 14 003 3101 09 99 000 0315 Insertion / removal tools, Han-Modular(R), for D-Sub crimp contact 09 99 000 0368 Removal tool, Han-Quintax(R), for Quintax contact 09 99 000 0323 Removal tool, for contacts in the multi module 09 99 000 0328 Removal tool, Han D(R), Service 09 99 000 0052 Removal tool, Han-Fast(R) Lock, for easier removal of the Fast-Lock contact from the printed circuit board 09 99 000 0837 90 * 29 Removal tools Identification Tools 90 * 30 Conductor cross-section (mm) Part number Removal tool, for LC contact in the Han(R) LC module 09 99 000 0843 Removal tool, for pneumatic contacts 09 99 000 0899 Removal tool, Han-Modular(R), Han-Eco(R), Han-Yellock(R), for single modules, Metal 09 99 000 0828 Removal tool, Han-Modular(R), for double modules 09 99 000 0842 Removal tool, for all Han-Modular(R) modules in plastic frames You need 2 pieces for the removal of a single module and 4 pieces for the double module. 09 99 000 0331 Removal tool, Han-Modular(R) 09 99 000 0335 Removal tool, for the Han(R) 100 A crimp module 09 99 000 0383 Removal tool, for the Han(R) 200 A crimp module Insert from mating side. 09 99 000 0820 Removal tool, for the Han(R) 100 A single module, for Han(R) GND 09 99 000 0827 Removal tool, Han(R) Megabit module 09 99 000 0880 Removal tools Identification Conductor cross-section (mm) Part number Removal tool, for locking sleeves in the HV module, 09 99 000 0327 Removal tool, for Han-Yellock(R) modules and frames, Thermoplastic 11 99 000 0001 Removal tool, for Han-Yellock(R) modules and frames, Metal 11 99 000 0002 Removal tool, for Han(R) HC Modular 250 Crimp, for unlocking the fixing plate Insert from mating side. 09 99 000 0332 Removal tool, Han(R) EasyCon, for assembly and disassembly of shielding clamps 09 99 000 0334 Tools 90 * 31 Stripping tools Tools Technical characteristics RoHS Conductor cross-section (mm) Part number Stripping tool, Self-adjusting 0,03 ... 10 09 99 000 0808 Stripping tool 0,08 ... 10 09 99 000 0159 Identification Fibre stripper 90 * 32 compliant 0.18/0.3 mm 0.3 mm 1 mm 20 99 000 1046 20 99 000 1041 20 99 000 1045 Application Tools Altanium Temperature Controllers and Ultra Hot Runners provide superior melt delivery for the Plastics Industry. Husky Hot Runner Systems with HARTING Han(R) 24 E connectors providing power and signal - quality connections resulting in highest reliability and minimum down time in molding systems. Photo courtesy: Husky Injection Molding Systems, Bolton, Ontario, Canada 90 * 33