VSC9125, VSC9128
FEATURES:
Virtual Concatenation (VC)
64 Independent Channels (GFP, PoS, X.85, X86, and LAPS)
Link Capacity Adjustment Scheme (LCAS)
Virtual Concatenation Groups (VCGs) with granularity of STS-1/VC-3
and/or STS-3c/VC-4
OIF Compliant SPI-4.2 Interface
Backplane Interface: 2.488 Gbps (W & P), serial STS-48/STM-16 or
622 Mbps (W & P), Serial STS-12/STM-4 622MHz for Legacy Backplanes
Line Interface: OIF Compliant SFI-4 Interface
128 Msec of Differential Delay Support
Support for Generic Framing Procedure (GFP)
BENEFITS:
"Right Sizes" the SONET/SDH Channels and Allows more Efficient
Data Transport
Multi-Service Capability with a High Number of Independent Channels
Supporting the Mapping of Different Types of Traffic such as Packet
over SONET, Ethernet over SONET/SDH, Fibre Channel, FICON,
ESCON, DVB-ASI
LCAS Increases the Flexibility of Virtual Concatenation (VC) by Allowing
Dynamic Reconfiguration of VC Groups
Better Bandwidth Utilization with STS-1/VC-3 and or STS-3c/VC-4
Level Granularity
SPI-4.2 Interface Allows Seamless Connection to a Number of Link
Layer Devices such as Multiprotocol MACs, Network Processors
(NPUs), Traffic Managers (TM), or FPGAs
Backplane Drivers for Direction Connection to TDM Switch Fabrics
OIF Standard SFI-4 Interface Enables Direct Connection to Optical
Modules, Forward Error Correction (FEC), Pointer Processors and Other
Devices Supporting Industry Standard SFI-4 Interfaces
GFP Makes it Possible to Transport any Protocol over SONET/SDH
SPECIFICATIONS:
Supports 64 Virtual Concatenation Groups (VCG) of STS-1 SPEs, TU-
3/VC-3s, and/or STS-3c SPE/VC-4s
Support for the Link Capacity Adjustment Scheme (LCAS) Protocol
with Hitless Adds and Removes
System Packet Interface Level 4 (SPI-4), Phase 2, 16-bit Bus OC-192
SFI-4 Line Interface
Dual 4 x 2.5 Gbps Serial STS-48/STM-16-like Backplane Interfaces
with Performance Monitoring to Working and Protection TSIs
8 x 622 Mbps Serial STS-12/STM-4-like Backplane
Interfaces with Performance Monitoring to TSIs
Complete STS-192/VC-4-64 Section, Line, and Path Termination and
Generation
Full Access to SONET/SDH Section, Line and Path Overhead Bytes via
Dedicated Ports
Supports Insertion/Extraction of GFP Client Management Frames, up
to 64 Bytes in Length, from/to the Microprocessor Interface for
Management Purposes
Flexible Payload Processing for Generic Framing Procedure (GFP)
Supports all Payload Types Including Ethernet Frames. Supports
HDLC-like framing: PoS - RFC2615, LAPS - X.85, and X.86
Supports Differential Delays up to 128 ms Through External DDR
SDRAM for Diverse Routing Applications
VSC9125 (HOVCAT48e™) Enhanced 2.5 Gbps Multiservice SONET/SDH VC Mapper
VSC9128 (HOVCAT192e™) Enhanced 10 Gbps Multiservice SONET/SDH VC Mapper
NETWORK PRODUCTS
PB-VSC9125,9128-001
HOVCATe™
VSC9125 (HOVCAT48e) is a 2.488 Gbps,
multiservice, SONET/SDH data mapping
device that supports both contiguously
concatenated as well as virtually concatenated
transport channels. A maximum of 48 data
channels can be mapped into transport
channels. Fully integrated Link Capacity Adjustment Scheme
(LCAS) protocol is implemented. For route-diverse applications,
external memory can accommodate differential delays up to 128
ms between tributaries. Frame-based Generic Framing
Procedure (GFP-F), transparent Generic Framing Procedure
(GFP-T), PPP/HDLC-like (PoS, LAPS) framing, and PPP/BCP
(Bridge Control Protocol) are mapped into the SONET/SDH
transport channels. The interface to these data channels is
through SPI-4.2, system/packet interface. HOVCAT48e supports
both a backplane interface and a line interface. The backplane
interface can be configured as dual (working and protection) 2.5
Gbps serial STS-48/STM-16-like streams or quad (working and
protection) 622 Mbps serial STS-12/STM-4-like streams for
interfacing to STS-1 TSI switches. Fully programmable
SONET/SDH Section, Line, and Path termination and generation
is supported. External ports provide access to the entire
Section/Line and Path overhead.
VSC9128 (HOVCAT192e) is a 10 Gbps, multiservice, SONET/SDH
data mapping device that supports both contiguously
concatenated as well as virtually concatenated transport
channels. A maximum of 64 data channels can be mapped into
transport channels. The Link Capacity Adjustment Scheme
(LCAS) protocol is supported. For route-diverse applications,
external memory can accommodate differential delays up to 128
ms between tributaries. Frame-based Generic Framing
Procedure (GFP-F), transparent Generic Framing Procedure
(GFP-T), PPP/HDLC-like (PoS, LAPS) framing, and PPP/BCP
(Bridge Control Protocol) are mapped into the SONET/SDH
transport channels. The interface to these data channels is
through a 16-bit OIF SPI-4 Phase 2 system/packet interface.
HOVCAT192e supports both a backplane interface and a line
interface. Fully programmable SONET/SDH Section, Line, and
Path termination and generation is supported. External ports
provide access to Section/Line and Path overhead.
GENERAL DESCRIPTION:
VSC9125 (HOVCAT48e™) Enhanced 2.5 Gbps Multiservice SONET/SDH VC Mapper
VSC9128 (HOVCAT192e™) Enhanced 10 Gbps Multiservice SONET/SDH VC Mapper
VSC9125, VSC9128
VSC9125 BLOCK DIAGRAM:
VSC9128 BLOCK DIAGRAM:
741 Calle Plano
Camarillo, CA 93012, USA
Tel: +1 805.388.3700
Fax: +1 805.987.5896
www.vitesse.com
Vitesse, ASIC-Friendly, FibreTimer, TimeStream and Snoop Loop are trademarks of Vitesse Semiconductor Corporation.
All other trademarks or registered trademarks mentioned herein are the property of their respective holders. Vitesse
Semiconductor Corporation ("Vitesse") retains the right to make changes to its products or specifications to improve
performance, reliability or manufacturability. All information in this document, including descriptions of features,
functions, performance, technical specifications and availability, is subject to change without notice at any time.
For more information on Vitesse Products visit the Vitesse web site
at www.vitesse.com or contact Vitesse Sales at (800) VITESSE
or sales@vitesse.com
