BAT15-099R
Cross-over ring silicon RF Schottky diodes
Product description
These Infineon RF Schottky diodes are silicon low barrier N-type devices with
an integrated guard ring on-chip for over-voltage protection. Their low barrier
height, low forward voltage and low junction capacitance make BAT15-099R a
suitable choice for mixer functions in applications which frequencies are as
high as 12 GHz.
Feature list
Low inductance LS = 2 nH (typical)
Low capacitance C = 0.29 pF (typical)
Industry standard SOT143 (2.9 mm x 2.4 mm x 1 mm)
Pb-free, RoHS compliant and halogen free
Product validation
Qualified for industrial applications according to the relevant tests of JEDEC47/20/22.
Potential applications
For mixers in:
Satellite systems
Low noise blocks for Ku bands
Security systems
Device information
Table 1 Part information
Product name / Ordering code Package Pin configuration Marking Pieces / Reel
BAT15-099R / BAT15099RE6327HTSA1 SOT143 Cross-over ring S6s 3 k
Attention:ESD (Electrostatic discharge) sensitive device, observe handling precautions
Datasheet Please read the Important Notice and Warnings at the end of this document v1.0
www.infineon.com 2018-06-30
Table of contents
Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Feature list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Device information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2 Electrical performance in test fixture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2 Characteristic curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
3 Thermal characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
4 Package information SOT143 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1 Absolute maximum ratings
Table 2 Absolute maximum ratings at TA = 25 °C, unless otherwise specified
Parameter Symbol Values Unit Note or test condition
Min. Max.
Diode reverse voltage VR 4 V
Forward current IF 110 mA
Total power dissipation PTOT 100 mW TS ≤ 67 °C 1)
Junction temperature TJ 150 °C
Operating temperature TOP -55 150
Storage temperature TSTG -55 150
Attention:Stresses above the maximum values listed here may cause permanent damage to the device.
Exposure to absolute maximum rating conditions for extended periods may aect device
reliability. Exceeding only one of these values may cause irreversible damage to the component.
1TS is the soldering point temperature.
BAT15-099R
Cross-over ring silicon RF Schottky diodes
Table of contents
Datasheet 2 v1.0
2018-06-30
2 Electrical performance in test fixture
2.1 Electrical characteristics
Table 3 Electrical characteristics at TA = 25 °C, unless otherwise specified
Parameter Symbol Values Unit Note or test condition
Min. Typ. Max.
Breakdown voltage VBR 4 V IR = 100 μA
Reverse current IR 5 μA VR = 1 V
Forward voltage VF0.16 0.25 0.32 V IF = 1 mA
0.25 0.35 0.41 IF = 10 mA
Forward voltage matching
Δ
VF 20 mV IF = 10 mA 1)
Dierential forward resistance RF 5.8 IF = 10 mA / 50 mA 2)
Capacitance C 0.29 0.5 pF VR = 0 V, f = 1 MHz
Inductance LS 2 nH
1
Δ
VF is the dierence between lowest and highest VF in a multiple diode component.
2
RF=VF50 mA VF10 mA
50 mA 10 mA
BAT15-099R
Cross-over ring silicon RF Schottky diodes
Electrical performance in test fixture
Datasheet 3 v1.0
2018-06-30
2.2 Characteristic curves
At TA = 25 °C, unless otherwise specified
0 0.5 1 1.5 2 2.5 3 3.5 4
VR [V]
0.22
0.24
0.26
0.28
0.3
0.32
0.34
C [pF]
Figure 1 Diode capacitance C vs. reverse voltage VR at frequency f = 1 MHz
0 0.2 0.4 0.6 0.8 1
VF [V]
10-3
10-2
10-1
100
101
102
103
IF [mA]
Figure 2 Forward current IF vs. forward voltage VF
BAT15-099R
Cross-over ring silicon RF Schottky diodes
Electrical performance in test fixture
Datasheet 4 v1.0
2018-06-30
0 0.5 1 1.5 2 2.5 3 3.5 4
VR [V]
10-1
100
101
IR [µA]
Figure 3 Reverse current IR vs. reverse voltage VR
Note: The curves shown in this chapter have been generated using typical devices but shall not be
understood as a guarantee that all devices have identical characteristic curves.
BAT15-099R
Cross-over ring silicon RF Schottky diodes
Electrical performance in test fixture
Datasheet 5 v1.0
2018-06-30
3 Thermal characteristics
Table 4 Thermal resistance
Parameter Sym
bol
Values Unit Note or test condition
Min. Typ. Max.
Thermal resistance
(junction - soldering point)
RthJS 830 K/W TS = 67 °C 1)
0 20 40 60 80 100 120 140 160
TS [°C]
0
20
40
60
80
100
120
IF [mA]
Figure 4 Permissible forward current IF in DC operation
1For RthJS in other conditions refer to the curves in this chapter.
BAT15-099R
Cross-over ring silicon RF Schottky diodes
Thermal characteristics
Datasheet 6 v1.0
2018-06-30
Figure 5 Thermal resistance RthJS in pulse operation
Figure 6 Permissible forward current ratio IFmax/IDC in pulse operation
BAT15-099R
Cross-over ring silicon RF Schottky diodes
Thermal characteristics
Datasheet 7 v1.0
2018-06-30
4 Package information SOT143
2.9±0.1
1.9
0.8+0.10
-0.05
1.7
0.2 0.4+0.10
-0.05 0.25 B
0.25 B
0.15 MIN.
2.4±0.15
1±0.1
0.2 A
1.3±0.1
0.08...0.15
0.1 MAX.
0°...8°
B
A
3x
MOLD FLASH, PROTUSIONS OR GATE BURRS OF 0.2MM MAXIMUM PER SIDE ARE NOT INCLUDED
12
3
4
ALL DIMENSIONS ARE IN UNITS MM
THE DRAWING IS IN COMPLIANCE WITH ISO 128 & PROJECTION METHOD 1 [ ]
Figure 7 Package outline
0.6
1.9
1
1.7
1.11.1
0.7
0.7
1.9
0.6
1.7
1
1.1
0.7
1.1
0.7
co pp e r s o lde r ma s k s te nc il a p e rture s
ALL DIMENS IONS ARE IN UNITS MM
Figure 8 Foot print
TYPE C ODE
MONTH
NOTE O F MANUFACTURER
YEAR
Figure 9 Marking layout example
40.2
1.15
2.6
8
3.15
4
ALL DIMENS IONS ARE IN UNITS MM
THE DR AWING IS IN C OMP LIANC E W ITH IS O 12 8 & P R OJ E CTION METHO D 1 [ ]
INDEX MARKING
PIN 1
Figure 10 Tape dimensions
BAT15-099R
Cross-over ring silicon RF Schottky diodes
Package information SOT143
Datasheet 8 v1.0
2018-06-30
Revision history
Document
version
Date of
release
Description of changes
1.0 2018-09-07 Change from series datasheet to individual one
Initial release of datasheet
Typical values and curves updated to the values of the production
(No product or process change behind)
Typical values added
Typical curves removed
BAT15-099R
Cross-over ring silicon RF Schottky diodes
Revision history
Datasheet 9 v1.0
2018-06-30
Trademarks
All referenced product or service names and trademarks are the property of their respective owners.
Edition 2018-06-30
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2018 Infineon Technologies AG
All Rights Reserved.
Do you have a question about any
aspect of this document?
Email: erratum@infineon.com
Document reference
IFX-vsd1515576924370
IMPORTANT NOTICE
The information given in this document shall in no
event be regarded as a guarantee of conditions or
characteristics (“Beschaenheitsgarantie”) .
With respect to any examples, hints or any typical values
stated herein and/or any information regarding the
application of the product, Infineon Technologies
hereby disclaims any and all warranties and liabilities of
any kind, including without limitation warranties of
non-infringement of intellectual property rights of any
third party.
In addition, any information given in this document is
subject to customer’s compliance with its obligations
stated in this document and any applicable legal
requirements, norms and standards concerning
customer’s products and any use of the product of
Infineon Technologies in customer’s applications.
The data contained in this document is exclusively
intended for technically trained sta. It is the
responsibility of customer’s technical departments to
evaluate the suitability of the product for the intended
application and the completeness of the product
information given in this document with respect to such
application.
WARNINGS
Due to technical requirements products may contain
dangerous substances. For information on the types
in question please contact your nearest Infineon
Technologies oice.
Except as otherwise explicitly approved by Infineon
Technologies in a written document signed by
authorized representatives of Infineon Technologies,
Infineon Technologies’ products may not be used in
any applications where a failure of the product or
any consequences of the use thereof can reasonably
be expected to result in personal injury