SPECIFICATION CONTROL DRAWING
Tyco Electronics Corporation
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A. Raychem
TITLE: SOLDERSLEEVE DEVICE SHIELD
TERMINATION WITH SILVER-PLATED
BRAID
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets] DOCUMENT NO.: S03-1X-R-100
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
PROD. REV.:
SEE TABLE DOC. ISSUE:
0 DATE: 20-May-03
PREPARED BY:
mforonda DCR NUMBER:
D030278 REPLACES:
N/A CAGE CODE:
06090 SCALE:
--- SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions Cable Dimensions
Product
Name Ident.
Code L±1.75
(L±0.070) øB
min øC
min H
min øE
max øF
min øD
max
S03-11-R-100 N/C SIZE1R 16.50
(0.650) 1.90
(0.070) 2.67
(0.105) 8.25
(0.325) 2.67
(0.105) 0.90
(0.035) 1.90
(0.070)
S03-12-R-100 N/C SIZE2R 16.50
(0.650) 2.67
(0.105) 3.68
(0.145) 8.25
(0.325) 3.68
(0.145) 1.40
(0.055) 2.67
(0.105)
S03-13-R-100 N/C SIZE3R 16.50
(0.650) 4.32
(0.170) 5.08
(0.200) 8.25
(0.325) 5.08
(0.200) 2.15
(0.085) 4.32
(0.170)
S03-14-R-100 N/C SIZE4R 19.10
(0.750) 5.97
(0.235) 6.48
(0.255) 8.25
(0.325) 6.48
(0.255) 3.30
(0.130) 5.97
(0.235)
S03-15-R-100 N/C SIZE5R 19.10
(0.750) 6.98
(0.275) 7.62
(0.300) 8.25
(0.325) 7.62
(0.300) 4.32
(0.170) 6.98
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn63 per ANSI/J-STD-006.
FLUX: TYPE ROL1 per ANSI/J-STD-004.
THERMAL INDICATOR: Color change violet to colorless.
3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue.
4. PRE-INSTALLED BRAID: Silver-plated copper strands. CMA 640.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting
the dimensional criteria listed and having tin or silver-plated shields and insulation compatible with the insert material.
For compatible insulations, see MIL-S-83519/2 or consult Tyco Electronics/Raychem.
2. For installation procedure, consult Tyco Electronics/Raychem process standard RCPS-100-70.
3. Temperature range: -55°C to +150°C.
4. Parts shall be marked with identification code per table.
For best results, prepare the cable as shown:
