BC COMPONENTS DATA SHEET 128 SAL-RPM Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature Product specification Supersedes data of January 1998 File under BC Components, BC01 1999 Apr 26 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM FEATURES * Polarized aluminium electrolytic capacitors, solid electrolyte MnO2 handbook, 4 columns * Radial leads, max. height 9.5 mm, resin dipped, orange coloured * Extremely long useful life, 20000 hours/125 C * Extended usable temperature range up to 175 C * Excellent low temperature, impedance and ESR behaviour MAM076 - 1 * Charge and discharge proof, application with 0 resistance allowed Fig.1 Component outlines. * Reverse DC voltage up to 0.3 x UR allowed * AC voltage up to 0.8 x UR allowed handbook, 4 columns axial version 123 SAL-A * Advanced technology to achieve high reliability and high stability. 128 SAL-RPM lower CV/volume 122 SAL-RP CCB031 APPLICATIONS * EDP, telecommunication, general industrial, automotive and audio-video * Smoothing, filtering and buffering * For small power supplies, DC/DC converters. QUICK REFERENCE DATA DESCRIPTION VALUE Case sizes (Hmax x Wmax x Tmax in mm) 9.5 x 7 x 3 to 9.5 x 8 x 6 Rated capacitance range (E6 series), CR 0.1 to 68 F 20% Tolerance on CR Rated voltage range, UR 6.3 to 40 V Category temperature range: UR = 6.3 to 40 V -55 to +85 C UC = 6.3 to 25 V -55 to +125 C Endurance test at 125 C 10000 hours Useful life at 125 C 20000 hours Useful life at 175 C 2000 hours Useful life at 40 C, IR applied >300000 hours Shelf life at 0 V, 125 C 500 hours Based on sectional specification IEC 60384-4/CECC 30300 Detail specification IEC 60384-4-2, CECC 30302 Climatic category IEC 60068 1999 Apr 26 55/125/56 2 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM Selection chart for CR, UR, UC and relevant maximum case sizes (H x W x T in mm) Preferred types in bold. UR (V) at Tamb = 85 C CR (F) 6.3 10 16 25 35 40 25 UC (V) at Tamb = 125 C 6.3 10 16 25 25 0.1 - - - - - 9.5 x 7 x 3 0.15 - - - - - 9.5 x 7 x 3 0.22 - - - - - 0.33 - - - - 9.5 x 7 x 3.5 9.5 x 7 x 4 9.5 x 7 x 3.5 0.47 - - - - 9.5 x 7 x 4 9.5 x 7 x 5 0.68 - - - 9.5 x 7 x 3.5 9.5 x 7 x 4 9.5 x 7 x 5 1 - - - 9.5 x 7 x 3.5 9.5 x 7 x 5 9.5 x 8 x 5 1.5 - - - 9.5 x 7 x 3.5 9.5 x 8 x 5 9.5 x 8 x 6 2.2 - - 9.5 x 7 x 3.5 9.5 x 7 x 4 9.5 x 8 x 6 9.5 x 8 x 6 9.5 x 8 x 6 3.3 - - 9.5 x 7 x 3.5 9.5 x 7 x 5 4.7 - 9.5 x 7 x 3.5 9.5 x 7 x 4 9.5 x 8 x 5 - - - 6.8 - 9.5 x 7 x 3.5 9.5 x 7 x 4 9.5 x 8 x 6 - - 9.5 x 8 x 6 10 9.5 x 7 x 3.5 9.5 x 7 x 4 9.5 x 7 x 5 - - 15 - 9.5 x 7 x 4 9.5 x 8 x 5 - - - 9.5 x 7 x 5 9.5 x 8 x 6 - - - 22 9.5 x 7 x 4 33 9.5 x 7 x 5 9.5 x 8 x 5 - - - - 47 9.5 x 8 x 5 9.5 x 8 x 6 - - - - 68 9.5 x 8 x 6 - - - - 1999 Apr 26 - 3 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES handbook, full pagewidth W 9 T 0.5 0 Bottom view 4.5 0.3 0.7 printed-circuit board O 0.6 5.2 0.06 0.05 MBC382 - 2 0.2 Dimensions in mm. For dimensions see Table 1. The diameter of the mounting holes in the printed-circuit board is 0.8 0.1 mm. Flanges are provided with degassing grooves. Fig.2 Form CB: Short leads, in boxes. handbook, full pagewidth W 9 0.5 0 T Bottom view 9 5.2 printed-circuit board 1 12.5 0.5 0.2 O 0.6 2 0.5 0.25 0.05 MBC384 - 2 1.0 Dimensions in mm. For dimensions see Table 1. The diameter of the mounting holes in the printed-circuit board is 0.8 0.1 mm, except for the hole of the anode lead of Form CA capacitors: 1.3 -0.2 mm. Flanges are provided with degassing grooves. 0.1 Fig.3 Form CA: Long leads with keyed polarity, in boxes. 1999 Apr 26 4 0.06 0.05 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature Table 1 128 SAL-RPM Physical dimensions, mass and packaging quantities; see Figs 2 and 3 MAXIMUM CASE SIZE HxWxT (mm) PACKAGING QUANTITIES CASE CODE MASS (g) FORM CA (note 1) FORM CB (note 1) FORM TR+ FORM TFA 9.5 x 7 x 3 10 0.22 1000 1000 2000 2000 9.5 x 7 x 3.5 20 0.25 1000 1000 2000 2000 9.5 x 7 x 4 30 0.30 1000 1000 2000 2000 9.5 x 7 x 5 40 0.35 1000 1000 1000 1000 9.5 x 8 x 5 50 0.50 1000 1000 1000 1000 9.5 x 8 x 6 60 0.60 1000 1000 1000 1000 Note 1. In plastic bags of 200 units each. TAPED PRODUCTS MARKING Tape dimensions are specified in data handbook PA01, section "Packaging". The capacitors are marked (where possible) with the following information: * Rated capacitance (in F) * Tolerance code on rated capacitance (M for 20%) * Rated voltage (in V) and category voltage if applicable handbook, halfpage * Date code in accordance with "IEC 60062" * Name of manufacturer * `+' sign to indicate the anode terminal * ` ' sign to indicate the cathode terminal. MOUNTING When bending, cutting or straightening the leads, ensure that the capacitor body is relieved of stress. Bending after soldering must be avoided. MBC386 - 1 Form TR+: Taped on reel, positive leading. Form TFA: Taped in ammopack. Fig.4 Taped versions. 1999 Apr 26 5 Electrolytic capacitors 128 series 10 F/16 V; 20% CR rated capacitance at 100 Hz, tolerance 20% IR max. RMS ripple current no necessary DC applied Maximum case size: 9.5 x 7 x 5 mm; Form CB IL5 max. leakage current after 5 minutes at UR Catalogue number: 2222 128 55109. Tan max. dissipation factor at 100 Hz ESR max. equivalent series resistance at 100 Hz Z max. impedance at 100 kHz Table 2 Electrical data and ordering information 128 series; preferred types in bold CASE CODE 6.3 6.3 10 9.5 x 7 x 3.5 20 22.4 320 22 9.5 x 7 x 4 30 32.9 33 9.5 x 7 x 5 40 65.4 47 9.5 x 8 x 5 50 68 6 MAXIMUM CASE SIZE HxWxT (mm) 10 16 595 2 0.10 20 2.0 53109 73109 23109 33109 470 870 4 0.10 9 1.0 53229 73229 23229 33229 595 1100 5 0.10 6.1 0.70 53339 73339 23339 33339 118.4 740 1360 7 0.10 4.3 0.50 53479 73479 23479 33479 3.0 60 153.0 800 1650 11 0.10 0.40 53689 73689 23689 33689 9.5 x 7 x 3.5 20 16.1 230 425 2 0.10 43 3.00 54478 74478 24478 34478 6.8 9.5 x 7 x 3.5 20 18.9 270 500 2 0.10 30 2.20 54688 74688 24688 34688 10 9.5 x 7 x 4 30 21.7 310 573 3 0.10 20 1.70 54109 74109 24109 34109 15 9.5 x 7 x 4 30 27.3 390 720 4 0.10 14 1.20 54159 74159 24159 34159 22 9.5 x 7 x 5 40 51.7 470 870 6 0.10 9 0.90 54229 74229 24229 34229 33 9.5 x 8 x 5 50 81.6 510 940 8 0.10 6.1 0.60 54339 74339 24339 34339 47 9.5 x 8 x 6 60 105.4 620 1140 12 0.10 4.3 0.40 54479 74479 24479 34479 2.2 9.5 x 7 x 3.5 20 14.0 200 370 2 0.10 91 4.50 55228 75228 25228 35228 3.3 9.5 x 7 x 3.5 20 16.1 230 425 2 0.10 61 3.30 55338 75338 25338 35338 4.7 9.5 x 7 x 4 30 18.9 270 500 2 0.10 43 2.30 55478 75478 25478 35478 6.8 9.5 x 7 x 4 30 22.4 320 590 3 0.10 30 1.65 55688 75688 25688 35688 10 9.5 x 7 x 5 40 42.9 390 720 4 0.10 20 1.10 55109 75109 25109 35109 15 9.5 x 8 x 5 50 71.2 445 820 6 0.10 14 0.85 55159 75159 25159 35159 22 9.5 x 8 x 6 60 86.7 510 940 9 0.10 9 0.65 55229 75229 25229 35229 Product specification 9.5 x 8 x 6 4.7 128 SAL-RPM 16 10 IR 100 Hz 125 C (mA) CATALOGUE NUMBER 2222 128..... IR IR ESR Z IL5 Tan 10 kHz 100 kHz 5 min 100 Hz 100 kHz FORM FORM FORM FORM 100 Hz 85 C 40 C TR+ TFA (A) () () CB CA (mA) (mA) REEL AMMO CR UC UR 100 Hz (V) (V) (F) BC Components Ordering example Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 1999 Apr 26 ELECTRICAL DATA AND ORDERING INFORMATION Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 to 25 C, P = 86 to 106 kPa, RH = 45 to 75%. 25 0.68 9.5 x 7 x 3.5 20 7.7 110 200 2 0.10 295 17.00 56687 76687 26687 36687 1 9.5 x 7 x 3.5 20 9.1 130 240 2 0.10 200 12.50 56108 76108 26108 36108 1.5 9.5 x 7 x 3.5 20 10.8 155 285 2 0.10 135 9.50 56158 76158 26158 36158 2.2 9.5 x 7 x 4 30 13.6 195 360 2 0.10 91 7.00 56228 76228 26228 36228 3.3 9.5 x 7 x 5 40 16.1 230 425 2 0.10 61 5.20 56338 76338 26338 36338 4.7 9.5 x 8 x 5 50 25.3 270 500 3 0.10 43 3.50 56478 76478 26478 36478 9.5 x 8 x 6 60 52.7 310 570 4 0.10 30 2.70 56688 76688 26688 36688 9.5 x 8 x 6 60 64.8 360 660 6 0.10 20 2.00 56109 76109 26109 36109 0.33 9.5 x 7 x 3.5 20 5.6 80 145 2 0.10 610 27.00 50337 70337 20337 30337 0.47 9.5 x 7 x 4 30 6.3 90 165 2 0.10 430 20.00 50477 70477 20477 30477 0.68 9.5 x 7 x 4 30 7.7 110 205 2 0.10 295 15.00 50687 70687 20687 30687 1 9.5 x 7 x 5 40 13.7 125 230 2 0.10 200 10.00 50108 70108 20108 30108 1.5 9.5 x 8 x 5 50 24.8 155 285 2 0.10 135 7.00 50158 70158 20158 30158 2.2 9.5 x 8 x 6 60 33.1 195 360 2 0.10 91 4.50 50228 70228 20228 30228 3.3 9.5 x 8 x 6 60 39.9 235 435 3 0.10 61 3.50 50338 70338 20338 30338 0.1 9.5 x 7 x 3 10 2.0 40 75 2 0.10 1990 45.00 57107 77107 27107 37107 0.15 9.5 x 7 x 3 10 2.5 50 95 2 0.10 1330 35.00 57157 77157 27157 37157 0.22 9.5 x 7 x 3.5 20 4.2 60 115 2 0.10 910 27.00 57227 77227 27227 37227 6.8 10 25 35 7 25 40 0.33 9.5 x 7 x 4 30 5.3 75 140 2 0.10 610 20.00 57337 77337 27337 37337 0.47 9.5 x 7 x 5 40 10.4 95 175 2 0.10 430 15.00 57477 77477 27477 37477 0.68 9.5 x 7 x 5 40 12.1 110 205 2 0.10 295 10.00 57687 77687 27687 37687 1 9.5 x 8 x 5 50 20.0 125 230 2 0.10 200 7.00 57108 77108 27108 37108 60 25.5 150 280 2 0.10 135 5.50 57158 77158 27158 37158 60 33.1 195 360 2 0.10 91 4.20 57228 77228 27228 37228 Product specification 9.5 x 8 x 6 9.5 x 8 x 6 128 SAL-RPM 1.5 2.2 BC Components CASE CODE Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 1999 Apr 26 MAXIMUM CASE SIZE HxWxT (mm) 25 IR 100 Hz 125 C (mA) CATALOGUE NUMBER 2222 128..... IR IR IL5 ESR Z 10 kHz 100 kHz Tan 5 min 100 Hz 100 kHz FORM FORM FORM FORM 85 C 40 C 100 Hz TR+ TFA (A) () () CB CA (mA) (mA) REEL AMMO CR UC UR 100 Hz (V) (V) (F) BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM Additional electrical data PARAMETER CONDITIONS VALUE Voltage Surge voltage for short periods Us 1.15 x UR Reverse voltage Urev < 0.3 x UR Maximum peak AC voltage reverse voltage applied Maximum peak AC voltage, without reverse voltage applied Tamb 85 C: at f 0.1 Hz 2 V 0.30 x UR at 0.1 Hz < f 1 Hz 0.45 x UR at 1 Hz < f 10 Hz 0.60 x UR at 10 Hz < f 50 Hz 0.65 x UR at f > 50 Hz 0.80 x UR 85 C < Tamb 125 C: at f 0.1 Hz 0.15 x UR at 0.1 Hz < f 1 Hz 0.22 x UR at 1 Hz < f 10 Hz 0.30 x UR at 10 Hz < f 50 Hz 0.32 x UR at f > 50 Hz 0.40 x UR Inductance Equivalent series inductance (ESL) case sizes 9.5 x 7 x 3 to 9.5 x 7 x 5 mm typ. 9 to 14 nH case sizes 9.5 x 8 x 5 and 9.5 x 8 x 6 mm typ. 11 to 16 nH all case sizes max. 20 nH case sizes 9.5 x 7 x 3 to 9.5 x 7 x 5 mm P125 = 88 mW case sizes 9.5 x 8 x 5 and 9.5 x 8 x 6 mm P125 = 104 mW Maximum leakage current after 5 minutes at UR and Tamb = 25 C IL5 0.025CR x UR or 2 A whichever is greater; see Table 2 Typical leakage current 15 s at UR and Tamb = 25 C: Dissipation Maximum power dissipation Current 1999 Apr 26 UR = 6.3 to 16 V 0.2 x value stated in Table 2 UR = 25 to 40 V 0.1 x value stated in Table 2 8 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM Voltage CCB114 40 handbook, 4 columns (1) (2) 35 UR (V) 25 16 10 6.3 4 0 -50 0 50 85 (1) UC = 125 C. (2) UC = 175 C. 100 125 150 175 Tamb (C) Fig.5 Maximum permissible voltage up to Tamb = 175 C. Ripple current (IR) Applying the maximum RMS ripple current given in Table 2 will cause a device temperature of 138 C. The 100 kHz values in Table 2 for other temperatures are to be calculated with the following IR multipliers: PARAMETER IR multiplier 1999 Apr 26 Tamb 25 C 40 C 65 C 85 C 105 C 125 C 1.1 1.0 0.88 0.75 0.59 0.37 9 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM Capacitance (C) MGB017 1.2 handbook, 4 columns C C0 1.1 standard deviation 1.0 0.9 0.8 0.05 0.7 0 0.6 80 40 0 80 40 C0 = capacitance at 25 C and 100 Hz. 120 T amb ( oC) 160 Fig.6 Typical multiplier of capacitance and standard deviation as functions of ambient temperature. Typical capacitance change after endurance test at Tamb = 125 C MGB018 4 handbook, full pagewidth C 2000 h (%) 2 5000 h 10000 h 0 2 4 6 8 10 0.01 0.1 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.9 99.99 cumulative frequency (%) Fig.7 Change of capacitance as a function of cumulative frequency after endurance test. 1999 Apr 26 10 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM Leakage current MGB019 10 2 handbook, 4 columns I I0 10 1 10 1 40 0 40 80 120 160 T amb ( oC) I0 = leakage current during continuous operation at UR and Tamb = 25 C. Fig.8 Typical multiplier of leakage current as a function of ambient temperature. Typical leakage current change after endurance test at Tamb = 125 C MGB020 100 80 leakage current (% of initial requirements) handbook, full pagewidth init. 60 50 40 2000 h 5000 h 10000 h 30 20 10 8 6 5 4 3 2 1 0.01 0.05 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.95 99.99 cumulative frequency (%) Fig.9 Leakage current change as a function of cumulative frequency after endurance test. 1999 Apr 26 11 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM Dissipation factor (tan ) MGB021 2.0 handbook, 4 columns tan tan 0 standard deviation 1.5 1.0 0.5 0.5 0 0 - 80 - 40 0 40 80 120 160 T amb ( oC) Tan 0 = dissipation factor at Tamb = 25 C and 100 Hz. Fig.10 Typical multiplier of dissipation factor and standard deviation as functions of ambient temperature. Typical tan change after endurance test at Tamb = 125 C MGB022 120 tan (% of initial requirements) handbook, full pagewidth init. 100 2000 h 5000 h 10000 h 80 60 40 20 0 0.01 0.1 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.9 99.99 cumulative frequency (%) Fig.11 Tan change as a function of cumulative frequency after endurance test. 1999 Apr 26 12 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM Equivalent series resistance (ESR) MBC593 10 4 handbook, 4 columns ESR () 10 3 1 102 2 3 10 4 5 1 Curve 1: 0.1 F, 40 V. Curve 2: 1.5 F, 40 V. Curve 3: 3.3 F, 25 V. Curve 4: 10 F, 6.3 V. Curve 5: 22 F, 10 V. ESR at 100 Hz. 10 1 100 50 0 50 100 150 T amb ( o C) Fig.12 Typical ESR as a function of ambient temperature. MRA481 10 3 handbook, 4 columns ESR () 10 2 1 10 1 2 3 1 10 Curve 1: 0.22 F, 40 V. Curve 2: 1.5 F, 25 V. Curve 3: 2.2 F, 16 V. Curve 4: 10 F, 6.3 V. Case size H x W x T = 9.5 x 7 x 3.5 mm. Tamb = 25 C. 10 4 1 2 10 2 10 3 10 4 10 5 Fig.13 Typical ESR as a function of frequency. 1999 Apr 26 13 10 6 f (Hz) 10 7 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM MRA482 10 3 handbook, 4 columns ESR () 10 2 10 1 1 2 3 1 10 Curve 1: 2.2 F, 25 V. Curve 2: 4.7 F, 16 V. Curve 3: 22 F, 6.3 V. Case size H x W x T = 9.5 x 7 x 4 mm. Tamb = 25 C. 10 1 2 10 2 10 3 10 4 10 5 10 6 10 7 f (Hz) Fig.14 Typical ESR as a function of frequency. MRA483 10 3 handbook, 4 columns ESR () 10 2 1 10 1 2 3 4 1 10 Curve 1: 0.47 F, 40 V. Curve 2: 3.3 F, 25 V. Curve 3: 10 F, 16 V. Curve 4: 33 F, 6.3 V. Case size H x W x T = 9.5 x 7 x 5 mm. Tamb = 25 C. 10 1 2 10 2 10 3 10 4 10 5 10 7 f (Hz) Fig.15 Typical ESR as a function of frequency. 1999 Apr 26 10 6 14 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM MRA484 10 3 handbook, 4 columns ESR () 10 2 10 1 1 2 1 10 Curve 1: 1 F, 40 V. Curve 2: 4.7 F, 25 V. Curve 3: 47 F, 6.3 V. Case size H x W x T = 9.5 x 8 x 5 mm. Tamb = 25 C. 3 1 2 10 10 2 10 3 10 4 10 5 10 6 10 7 f (Hz) Fig.16 Typical ESR as a function of frequency. MRA485 10 3 handbook, 4 columns ESR () 10 2 10 1 1 1 2 3 10 Curve 1: 10 F, 25 V. Curve 2: 22 F, 16 V. Curve 3: 68 F, 6.3 V. Case size H x W x T = 9.5 x 8 x 6 mm. Tamb = 25 C. 10 1 2 10 2 10 3 10 4 10 5 10 7 f (Hz) Fig.17 Typical ESR as a function of frequency. 1999 Apr 26 10 6 15 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM Impedance (Z) MGB023 2.0 o Tamb = -55 C handbook, 4 columns Z Z0 1.5 -20 oC +25 o C 1.0 o +50 C +125 oC 0.5 0 10 2 10 3 10 4 10 5 10 6 10 7 f (Hz) 10 8 Z0 = initial impedance value at Tamb = 25 C. Fig.18 Typical multiplier of impedance as a function of frequency at different ambient temperatures. MRA491 10 3 handbook, 4 columns Z () 10 2 1 2 10 1 3 4 1 10 Curve 1: 0.22 F, 40 V. Curve 2: 1.5 F, 25 V. Curve 3: 2.2 F, 16 V. Curve 4: 10 F, 6.3 V. Case size H x W x T = 9.5 x 7 x 3.5 mm. Tamb = 25 C. 10 1 2 10 2 10 3 10 4 10 5 10 7 f (Hz) Fig.19 Typical impedance as a function of frequency. 1999 Apr 26 10 6 16 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM MRA492 10 3 handbook, 4 columns Z () 10 2 10 1 1 2 3 1 10 Curve 1: 2.2 F, 25 V. Curve 2: 4.7 F, 16 V. Curve 3: 22 F, 6.3 V. Case size H x W x T = 9.5 x 7 x 4 mm. Tamb = 25 C. 1 2 10 10 2 10 3 10 4 10 5 10 6 10 7 f (Hz) Fig.20 Typical impedance as a function of frequency. MRA493 10 3 handbook, 4 columns 1 Z () 10 2 2 3 10 1 4 1 10 1 Curve 1: 0.47 F, 40 V. Curve 2: 3.3 F, 25 V. Curve 3: 10 F, 16 V. Curve 4: 33 F, 6.3 V. 10 2 10 2 10 3 10 4 10 5 10 7 f (Hz) Case size H x W x T = 9.5 x 7 x 5 mm. Tamb = 25 C. Fig.21 Typical impedance as a function of frequency. 1999 Apr 26 10 6 17 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM MRA494 10 3 handbook, 4 columns Z () 1 10 2 2 10 1 3 1 10 Curve 1: 1 F, 40 V. Curve 2: 4.7 F, 25 V. Curve 3: 47 F, 6.3 V. Case size H x W x T = 9.5 x 8 x 5 mm. Tamb = 25 C. 1 2 10 10 2 10 3 10 4 10 5 10 6 10 7 f (Hz) Fig.22 Typical impedance as a function of frequency. MRA495 10 3 handbook, 4 columns Z () 10 2 1 10 1 2 3 1 10 Curve 1: 10 F, 25 V. Curve 2: 22 F, 16 V. Curve 3: 68 F, 6.3 V. Case size H x W x T = 9.5 x 8 x 6 mm. Tamb = 25 C. 10 1 2 10 2 10 3 10 4 10 5 10 6 Fig.23 Typical impedance as a function of frequency at Tamb = 25 C. 1999 Apr 26 10 7 f (Hz) 18 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM SPECIFIC TESTS AND REQUIREMENTS General tests and requirements are specified in data handbook PA01, section "Tests and Requirements". Table 3 Test procedures and requirements TEST NAME OF TEST Endurance PROCEDURE (quick reference) REFERENCE IEC 60384-4/ CECC 30300 subclause 4.13 REQUIREMENTS Tamb = 125 C; UR = 6.3 to 25 V with UR applied; UR = 35 and 40 V with UC applied; 10000 hours C/C: 10% Tamb = 125 C; IR applied and: UR = 6.3 to 25 V with UR applied; UR = 35 and 40 V with UC applied; 20000 hours C/C: 15% tan 1.2 x spec. limit Z 1.2 x spec. limit IL5 spec. limit Useful life CECC 30302 subclause 1.8.1 tan 1.5 x spec. limit Z 1.5 x spec. limit IL5 spec. limit no short or open circuit, no visible damage total failure percentage: <1% Shelf life (storage IEC 60384-4/ at high temperature) CECC 30302 subclause 4.17 Tamb = 125 C; no voltage applied; 500 hours C/C: 10% Charge and discharge IEC 60384-4-2 subclause 9.21 106 cycles without series resistance: 0.5 s to UR; 0.5 s to ground C/C: 5% Solvent resistance IEC 60068-2-45 test XA IEC 60653 immersion: 5 0.5 minutes with or without ultrasonic at 55 5 C visual appearance not affected tan 1.2 x spec. limit IL5 1 x spec. limit 1999 Apr 26 solvents: demineralized water and/or calgonite solution (20 g/l) 19 no short or open circuit, no visible damage BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature TEST NAME OF TEST Extended vibration REFERENCE IEC 60068-2-6 test Fc 128 SAL-RPM PROCEDURE (quick reference) REQUIREMENTS 10 to 2000 Hz; 1.5 mm or 20 g; no intermittent contacts 1 octave/minute; 3 directions; no breakdown 1 sweep per direction; no voltage applied no open circuiting no mechanical damage C/C: 5% tan 1.2 x spec. limit Z 1.2 x spec. limit IL5 1.5 x spec. limit Shock test IEC 60068-2-27 test Ea half-sine or sawtooth pulse shape; 50 g; 11 ms; 3 successive shocks in each direction of 3 mutually perpendicular axes; no voltage applied no intermittent contacts no breakdown no open circuiting no mechanical damage C/C: 5% tan 1.2 x spec. limit Z 1.2 x spec. limit IL5 1.5 x spec. limit Passive flammability test IEC 60695-2-2 capacitor mounted to a vertical printed-circuit board, one flame on capacitor body; Tamb = 20 to 25 C; test duration = 20 s after removing the test flame from the capacitor, the capacitor must not continue to burn for more than 15 s; no burning particles must drop from the sample CAUTION CLEANING SOLVENTS, ADHESIVES, COATING MATERIALS Some cleaning agents, adhesives or coating materials have an adverse affect on electrolytic capacitors. For cleaning, varnishing, coating, lacquering, embedding or gluing at the capacitor's sealing, ensure that the materials used are halogene-free in all their constituent parts (base material, thinners, binders, reacting agents, propellants, additives). For further information regarding the correct use of electrolytic capacitors, please refer to data handbook PA01, section "Application guidelines" . 1999 Apr 26 20 BC Components Product specification Aluminium electrolytic capacitors Solid Al, Radial Pearl Miniature 128 SAL-RPM DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Customers of BC Components who are using or selling these products for use in such applications do so at their own risk and agree to fully indemnify BC Components for any damages resulting from such improper use or sale. 1999 Apr 26 21